Abstract

This European Standard specifies a rapid method for testing the dishwashing resistance of ceramic articles intended for domestic use. It does not define the number of dishwashing cycles that any given product should withstand.

Status
Not Published
Public Enquiry End Date
02-Jan-2027
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
26-Oct-2026
Due Date
15-Mar-2027

Buy Documents

Draft

oSIST prEN 12875-4:2026

English language (8 pages)
Preview
Preview
e-Library read for
×1 day

oSIST prEN 12875-4:2026 is the Slovenian version of draft European Standard prEN 12875-4, published by SIST and prepared by CEN. It specifies a rapid test for the dishwashing resistance of domestic ceramic articles and describes how to judge changes in gloss or colour after alkaline detergent immersion. The document is meant for laboratories, manufacturers, and quality teams that need a practical screening method for ceramic tableware.

What does oSIST prEN 12875-4:2026 specify?

oSIST prEN 12875-4:2026 covers a rapid method for testing ceramic articles intended for domestic use. It does not set a required number of dishwashing cycles that a product should withstand, so it is a test method rather than a product performance limit.

The document is organized into clauses on scope, normative references, terms and definitions, principle, reagents, apparatus, test specimens, procedure, test report, and evaluation of test results, followed by a bibliography. In practice, that layout takes the reader from the test basis through the equipment, the specimen handling, and the way results are reported and compared.

What are the key requirements of oSIST prEN 12875-4:2026?

oSIST prEN 12875-4:2026 relies on a fixed immersion test in a static alkaline detergent solution. Unused specimens are immersed at (75 ± 1) °C for a total of 32 h, then compared visually with similar untested pieces to identify changes in gloss or colour. The result is a screening judgment of surface change, not a count of wash cycles.

Principle and test conditions

The test uses an alkaline detergent solution made from the specified detergent and water of grade 3 quality. The solution concentration is 0.5 % (m/m), and the total ware surface area to solution volume must not exceed 130 cm²/l. That ratio matters because it keeps the test severity controlled and comparable between laboratories.

Reagents and apparatus

The specified detergent is the one given in EN 60436. The apparatus includes a stainless steel tank with a close-fitting lid, a stainless steel rack to keep specimens separated, and a hot water bath that holds the tank at the test temperature and records temperature deviations. The standard also calls for the inspection site from prEN 12875-2, plus a precision ruler and a thermometer. In practice, this means the test needs controlled equipment, not an ordinary household dishwasher.

Test specimens and preparation

A test specimen is any ceramic ware item that can be completely immersed in the solution, and at least four identical pieces are needed. One piece is kept as an untested reference standard. Before testing, the specimens are cleaned, inspected under normal corrected vision from (30 ± 10) cm, and any inferior pieces are discarded so that the set is comparable.

Immersion, inspection, and reporting

The specimens are immersed for 16 h ± 10 min, removed, rinsed, dried, and examined against the reference pieces. The immersion is then repeated for another 16 h ± 10 min with fresh detergent solution, giving the full 32 h exposure. The test report records the document reference, specimen identification, sampling and test dates, specimen count, category according to prEN 12875-2:2026, the average evaluation figures after 16 h and 32 h, and any unusual features. If different methods lead to disagreement, the classification based on the reference test method applies.

Who uses oSIST prEN 12875-4:2026?

oSIST prEN 12875-4:2026 is used by test laboratories, ceramic tableware manufacturers, suppliers, and quality managers working with domestic ceramic articles. It helps them check whether a product shows visible detergent attack, compare product variants, and document results in a way that can be read with prEN 12875-2.

What changed in oSIST prEN 12875-4:2026 from the previous edition?

oSIST prEN 12875-4:2026 supersedes EN 12875-4:2006. The foreword states two significant technical changes: the specified detergent has been adapted to the state of the art, and the references to inspection and evaluation according to prEN 12875-2 have been adjusted.

Which standards are used with oSIST prEN 12875-4:2026?

StandardWhat it contributes
EN ISO 3696:1995Water quality for preparing the detergent solution
EN 60436The specified detergent used in the test
prEN 12875-2 / prEN 12875-2:2026Inspection, evaluation, and result classification
EN 12875-1Reference test method used in disputes
EN 12875-4Earlier version cited in the introduction and bibliography
EN 12875-1, Part 1Companion part for the reference method
EN 12875-2, Part 2Companion part for inspection and evaluation
EN 12875-5, Part 5Companion rapid test for ceramic catering articles

What does the oSIST prEN 12875-4:2026 document contain?

The document gives the test principle, the detergent and water requirements, the tank and bath arrangement, and the specimen handling sequence. It also specifies how to measure surface area, how to carry out the two immersion periods, and how to compare tested pieces with the untested reference standard.

It then sets out what the test report must contain and how to treat disagreements between methods by using the reference method. The bibliography points to the earlier edition and the related parts of the EN 12875 series.

Relations

Effective Date
01-Dec-2026

Buy Documents

Draft

oSIST prEN 12875-4:2026

English language (8 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

Bureau Veritas

Bureau Veritas is a world leader in laboratory testing, inspection and certification services.

COFRAC France Verified

DNV

DNV is an independent assurance and risk management provider.

NA Norway Verified

Sponsored listings

Frequently Asked Questions

oSIST prEN 12875-4:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles". This standard covers: This European Standard specifies a rapid method for testing the dishwashing resistance of ceramic articles intended for domestic use. It does not define the number of dishwashing cycles that any given product should withstand.

This European Standard specifies a rapid method for testing the dishwashing resistance of ceramic articles intended for domestic use. It does not define the number of dishwashing cycles that any given product should withstand.

oSIST prEN 12875-4:2026 is classified under the following ICS (International Classification for Standards) categories: 67.250 - Materials and articles in contact with foodstuffs; 97.040.40 - Dishwashers; 97.040.60 - Cookware, cutlery and flatware. The ICS classification helps identify the subject area and facilitates finding related standards.

oSIST prEN 12875-4:2026 has the following relationships with other standards: It is inter standard links to SIST EN 12875-4:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

oSIST prEN 12875-4:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2026
Mehanska odpornost posod proti pomivanju v pomivalnem stroju - 4. del: Hitri
preskus za keramične izdelke za gospodinjstvo
Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic
articles
Spülmaschinenbeständigkeit von Gegenständen - Teil 4: Schnellverfahren für
keramische Haushaltsgegenstände
Résistance mécanique au lave-vaisselle des ustensiles - Partie 4 : Essai accéléré pour
les articles en céramique à usage domestique
Ta slovenski standard je istoveten z: prEN 12875-4
ICS:
97.040.40 Pomivalni stroji Dishwashers
97.040.60 Kuhinjska posoda, jedilni Cookware, cutlery and
servisi in jedilni pribor flatware
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2026
ICS 67.250; 97.040.40; 97.040.60 Will supersede EN 12875-4:2006
English Version
Mechanical dishwashing resistance of utensils - Part 4:
Rapid test for domestic ceramic articles
Résistance mécanique au lave-vaisselle des ustensiles - Spülmaschinenbeständigkeit von Gegenständen - Teil
Partie 4 : Essai accéléré pour les articles en céramique 4: Schnellverfahren für keramische
à usage domestique Haushaltsgegenstände
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 194.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12875-4:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Reagents . 5
5.1 Specified detergent . 5
5.2 Detergent solution . 5
6 Apparatus . 5
7 Test specimens . 6
8 Procedure . 6
8.1 Preparation of test specimens . 6
8.2 Immersion of test specimens . 6
9 Test report . 7
10 Evaluation of test results . 7
Bibliography . 8
European foreword
This document (prEN 12875-4:2026) has been prepared by Technical Committee CEN/TC 194 “Utensils
in contact with food”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12875-4:2006 [1].
This document includes the following significant technical changes with respect to EN 12875-4:2006
[1]:
— the specified detergent has been adapted to the state of the art;
— the references to the inspection and evaluation according to prEN 12875-2 [2] have been adjusted.
Further parts of the EN 12875 series, under the general title Mechanical dishwashing resistance of
utensils, that have already been published or are in preparation, are as follows:
— Part 1: Reference test method for domestic articles
— Part 2: Inspection and evaluation
— Part 5: Rapid test for ceramic catering articles
Introduction
This document specifies an accelerated test for the determination of the dishwashing resistance of
domestic articles made of ceramics.
No satisfactory statistical correlation has been found between results obtained by the accelerated test
(EN 12875-4 [3]) and by the reference test method (EN 12875-1 [4]). Nevertheless, the accelerated test
is a useful method for predicting the dishwashing resistance of ceramic tableware products for domestic
use.
In case of dispute the test method given in EN 12875-1 [4] is the reference method.
It is intended that the inspection procedure given in prEN 12875-2 [2] be used to examine domestic
ceramic articles which have been s
...