iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 15752-1:2008

(Main)

Glass in building - Adhesive backed polymeric film - Part 1: Definitions and descriptions

Glass in building - Adhesive backed polymeric film - Part 1: Definitions and descriptions

This European Standard defines adhesive backed polymeric film and the performance characteristics of adhesive backed polymeric film for use, on glass, in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric film that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristics.

Glas im Bauwesen - Selbstklebende Polymerfolie - Teil 1: Begriffe und Beschreibungen

Diese Europäische Norm definiert selbstklebende Polymerfolie und deren Leistungsmerkmale im Hinblick auf
den Einsatz in Verbindung mit Glas im Bauwesen.
Die vorliegende Norm gilt nicht für selbstklebende Polymerfolie aus Polyvinylchlorid (PVC).
Für selbstklebende Polymerfolie, die Bestandteil von Baugruppen wie zum Beispiel Verbundglas oder
Mehrscheiben-Isolierglas ist, können weitere Anforderungen gelten. Diese zusätzlichen Anforderungen sind in
der entsprechenden Produktnorm festgelegt. Selbstklebende Polymerfolie verliert in diesem Fall nicht ihre
mechanischen oder thermischen Merkmale.

Verre dans la construction - Film polymère adhésif - Partie 1: Définitions et descriptions

La présente Norme européenne définit le film polymère adhésif et les caractéristiques de performance du film polymère pour son utilisation, sur le verre, dans les bâtiments.
La présente norme ne s'applique pas aux films polymères adhésifs fabriqués à partir du polychlorure de vinyle (PVC).
D'autres exigences, non définies dans la présente norme, peuvent s'appliquer au film polymère adhésif qui est incorporé dans des ensembles, par exemple un verre feuilleté ou un vitrage isolant. Les exigences additionnelles sont définies dans la norme de produit appropriée. Le film polymère adhésif, dans ce cas, ne perd pas ses caractéristiques mécaniques ou thermiques.

Steklo v gradbeništvu - Samolepljiva polimerna folija - 1. del: Definicije in opisi

General Information

Status
Not Published
Public Enquiry End Date
30-May-2008
Withdrawal Date
17-Apr-2011
ICS
01.040.81 - Glass and ceramics industries (Vocabularies)
81.040.20 - Glass in building
83.140.10 - Films and sheets
Technical Committee
STV - Steklo, svetloba in razsvetljava v gradbeništvu
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
18-Apr-2011
Due Date
23-Apr-2011
Completion Date
18-Apr-2011
Ref Project
prEN 15752-1 - Glass in building - Adhesive backed polymeric film - Part 1: Definitions and descriptions

Buy Standard

prEN 15752-1:2008prEN 15752-1:2008
PreviousNext
Draft
prEN 15752-1:2008
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2008
Steklo v gradbeništvu - Samolepljiva polimerna folija - 1. del: Definicije in opisi
Glass in building - Adhesive backed polymeric film - Part 1: Definitions and descriptions
Glas im Bauwesen - Selbstklebende Polymerfolie - Teil 1: Begriffe und Beschreibungen
Verre dans la construction - Film polymère adhésif - Partie 1: Définitions et descriptions
Ta slovenski standard je istoveten z: prEN 15752-1
ICS:
01.040.81
81.040.20
83.140.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2008
ICS 01.040.81; 01.040.83; 81.040.20; 83.140.10

English Version
Glass in building - Adhesive backed polymeric film - Part 1:
Definitions and descriptions
Verre dans la construction - Film polymère adhésif - Partie Glas im Bauwesen - Selbstklebende Polymerfolie - Teil 1:
1: Définitions et descriptions Begriffe und Beschreibungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15752-1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.4
Introduction .5
1 Scope .5
2 Normative references .5
3 Definitions .6
4 Adhesive backed polymeric films.8
4.1 General.8
4.2 External films .8
4.3 Internal films.9
5 Properties of adhesive backed polymeric films .9
5.1 General.9
5.2 Clear film.10
5.3 Solar control film .10
5.3.1 General.10
5.3.2 Measurement.11
5.3.3 Glare Reduction .11
5.4 Safety film.11
5.4.1 General.11
5.4.2 Measurement.11
5.5 Security film .12
5.5.1 General.12
5.5.2 Measurement.12
5.6 Decorative film .12
5.7 Anti-graffiti film .12
5.8 Ultra Violet reducing film .12
5.8.1 General.12
5.8.2 Measurement.12
5.9 Low Emissivity film.13
5.9.1 General.13
5.9.2 Measurement.13
5.10 Privacy film.13
5.11 RFI/EMF shielding film .13
5.11.1 General.13
5.11.2 Measurement.13
6 Dimensions and tolerances .13
6.1 Nominal thickness and thickness tolerances.13
6.1.1 General.13
6.1.2 Measurement.13
6.2 Width and length (sizes) .14
6.2.1 General.14
6.2.2 Splices .14
7 Test methods for durability .14
7.1 General.14
7.2 Accelerated weathering – test method.15
7.2.1 General.15
7.2.2 Preparation of test and reference specimens.15
7.2.3 Size and number of test specimens.15
7.2.4 Cleaning of filmed glass samples.15
7.2.5 Conditioning of test specimens.15
7.2.6 Test methodology.15
7.2.7 Accelerated weathering – procedure .16
7.3 Accelerated weathering – changes in physical and solar-optical properties.16
7.3.1 General .16
7.3.2 Sampling points.17
7.3.3 Tests on adhesive backed polymeric safety films.17
7.3.4 Solar optical properties .17
7.4 Scratch / abrasion resistance .17
7.4.1 General .17
7.4.2 Preparation of test specimens .17
7.4.3 Number of test specimens.18
7.4.4 Conditioning of test specimens.18
7.4.5 Cleaning of test specimens.18
7.4.6 Pre-abrasion haze measurement .19
7.4.7 Taber abrasion test method .19
7.4.8 Post-abrasion haze measurement .20
7.4.9 Calculation of ∆Haze.21
7.4.10 Test report.21
7.5 Acceptance criteria – changes in performance after accelerated weathering.22
7.5.1 Adhesive strength for adhesive backed polymeric safety / security film .22
7.5.2 Ultimate tensile strength of adhesive backed polymeric safety / security film .22
7.5.3 Solar optical properties .22
7.6 Acceptance criteria – change in % ∆Haze after abrasion .22
Annex A (normative) Abrasion Testing of Adhesive Backed Polymeric Film: Measurement of
Haze .23
A.1 Introduction.23
A.2 Definitions and Descriptions.23
A.2.1 Haze .23
A.2.2 ∆Haze.23
A.3 Test Equipment.23
A.3.1 Taber Abrader .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
oSIST prEN 15755-1:2008(Main)
Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and descriptions
prEN 15755-1

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 15755-1:2008(Main)
Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and descriptions
prEN 15755-1

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings. This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 488-2:2025(Main)
District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
EN 488-2:2025

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15698-2:2025(Main)
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
EN 15698-2:2025

This document specifies requirements and test methods for fitting and steel valve assemblies of factory made thermally insulated bonded twin pipe assemblies for hot water networks in accordance with EN 13941-1, comprising two steel service pipes, in most cases steel fittings and/or steel valves, steel components, polyurethane (PUR) foam thermal insulation and one casing of polyethylene.
NOTE   Steel components can be e.g. fixing bars.
The twin pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.
This document covers the following assemblies:
-   fittings: bends, T-pieces and reducers;
-   valves for main line.
This document applies to fitting assemblies with an internal pressure of at least 1,6 MPa and steel valve assemblies with a maximum internal pressure of 2,5 MPa.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-8:2025(Main)
Safety of packaging machines - Part 8: Strapping machines
EN 415-8:2025

This document is applicable to the following groups of machines:
-   powered hand strapping tools;
-   semi-automatic strapping machines;
-   automatic strapping machines.
This document does not apply to:
-   strapping tools, where the strap tension is only applied by manual effort;
-   machines, intended for use with paper strap;
-   hand-held motor-operated electric strapping tools.
NOTE   For hand-held motor-operated electric strapping tools see EN 60745-2-18:2009 and EN 62841-1:2015.
This document deals with safety requirements for machine design, transport, installation, commissioning, operation, adjustment, maintenance and cleaning. The extent to which hazards, hazardous situations and events are covered is indicated in Annex A.
This document does not consider the following hazards:
-   the use of strapping machines in potentially explosive atmosphere;
-   the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;
-   hazards that are associated with decommissioning strapping machines.
Hazards associated with decommissioning of strapping machines are not considered and therefore excluded but are generally part of the instruction manual (see Clause 6), together with suited measures, if necessary.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3155-009:2025(Main)
Aerospace Series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3155-009:2025

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13757-7:2025(Main)
Communication systems for meters - Part 7: Transport and security services
EN 13757-7:2025

This document specifies transport and security services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies secure communication capabilities by design and supports the building of a secure system architecture.
This document is applicable to the protection of consumer data to ensure privacy.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/IEC 27555:2025(Main)
Information security, cybersecurity and privacy protection - Guidelines on personally identifiable information deletion (ISO/IEC 27555:2021)
EN ISO/IEC 27555:2025

The standard contains guidelines for developing and establishing policies and procedures for deletion
of PII in organizations by specifying:
—   a harmonized terminology for PII deletion;
—   an approach for defining deletion rules in an efficient way;
—   a description of required documentation; and
—   a broad definition of roles, responsibilities and processes.
This document is intended to be used by organizations where PII are stored or processed.
This document does not address:
—   specific legal provision, as given by national law or specified in contracts;
—   specific deletion rules for particular clusters of PII as are to be defined by PII controllers for
—   processing PII;
—   deletion mechanisms;
—   reliability, security and suitability of deletion mechanisms;
—   specific techniques for de-identification of data.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9038:2025(Main)
Determination of sustained combustibility of liquids (ISO 9038:2025)
EN ISO 9038:2025

This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified, for example, in regulations.
NOTE            Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot “sustain combustion” at some specified temperature(s).
The procedure is applicable to paints (including water-borne paints), varnishes, paint binders, solvents, petroleum or related products and adhesives, that have a flash point. It is not applicable to painted surfaces in respect of assessing their potential fire hazards.
This test method is applicable, in addition to test methods for flash point, for assessing the fire hazard of a product.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-41:2025(Main)
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 81-41:2024

1.1   This draft European Standard deals with safety requirements for construction, manufacturing, installation, maintenance and dismantling of electrically powered vertical lifting platforms affixed to a building structure intended for use by persons with impaired mobility:
-   travelling vertically between predefined levels along a guided path whose inclination to the vertical does not exceed 15°;
-   intended for use by persons with or without a wheelchair;
-   supported or sustained by rack and pinion, rope traction drive, noncircular elastomeric-coated steel suspension members (hereafter called flat belt) traction drive, rope positive drive, chains, toothed belts, screw and nut, guided chain, scissors mechanism or hydraulic jack (direct or indirect);
-   with enclosed liftways;
-   with a speed not greater than 0,15 m/s;
-   with platforms where the carrier is not completely enclosed.
1.2   This draft European Standard deals with all significant hazards relevant to lifting platforms, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4).
1.3   This draft European Standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   handling of materials, the nature of which could lead to dangerous situations;
-   vertical lifting platforms whose primary function is the transportation of goods;
-   vertical lifting platforms whose carriers are completely enclosed;
-   vertical lifting platforms prone to vandalism;
-   hazards occurring during manufacture;
-   earthquakes, flooding;
-   firefighting, evacuation and behaviour during a fire;
-   noise and vibrations;
-   the design of concrete, hard core, timber or other foundation or building arrangement;
-   the design of anchorage bolts to the supporting structure;
-   type C wheelchairs as defined in EN 12183 and/or EN 12184.
NOTE   For the actual type of machinery, noise is not considered a significant nor relevant hazard.
1.4   This draft European Standard is not applicable to Vertical Lifting Platforms intended for use by persons with impaired mobility which are manufactured before the date of its publication as an EN.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day