91.140.50 - Electricity supply systems
ICS 91.140.50 Details
Electricity supply systems
Stromversorgungsanlagen
Systemes de fourniture d'electricite
Sistemi za oskrbo z elektriko
General Information
Frequently Asked Questions
ICS 91.140.50 is a classification code in the International Classification for Standards (ICS) system. It covers "Electricity supply systems". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 952 standards classified under ICS 91.140.50 (Electricity supply systems). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 91.140.50 - Electricity supply systems
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
IEC 60364-8-82:2022 provides requirements and recommendations that apply to low-voltage electrical installations connected or not to a distribution network able to operate:
- with local power supplies, and/or
- with local storage units,
and that monitors and controls the energy from the locally connected sources delivering it to:
- current-using equipment, and/or
- local storage units, and/or
- distribution networks.
Such electrical installations are designated as prosumer's electrical installations (PEIs). These requirements and recommendations apply to new installations and modifications of existing installations. This document also provides requirements and recommendations for the safe, efficient and correct behaviour of these installations when integrated into a smart grid. Information related to grid interaction to ensure the stability of the electrical system for grid connected PEIs is given in Annex B. This document covers the requirements related to stability of islanded and stand-alone PEIs. This first edition cancels and replaces IEC 60364-8-2 published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 60364-8-2:2018:
a) the vocabulary and concepts have been aligned as much as possible with those used by TC 8 and SC 8B, taking notably into account the IEC 62898 and IEC 62786 series, still respecting the installers mindset (installers being the first users of the IEC 60364 series and being used to only refer to the IEC 60364 series);
b) the type of system earthing and the change of type of system earthing (sequencing) when there is a change of mode of the prosuming installation, have been clarified;
c) the conditions of connection and disconnection from the DSO network have also been described, both from the safety point of view and the proper functioning point of view;
d) additional requirements have been introduced;
e) the figures have been updated;
f) a new normative Annex D on single dwelling or similar application islandable PEIs has been added;
g) the numbering has also been reviewed to follow the updated numbering system of the IEC 60364 series, in line with the IEC Directives and compatible with Parts 7.
- Standard376 pagesEnglish languagesale 15% off
- Standard146 pagesEnglish and French languagesale 15% off
- Standard19 pagesEnglish languagesale 15% off
IEC TS 63222‑4:2026 specifies the requirements of the models, methods and procedures for harmonic analysis on the public electric power network. This document is applicable to harmonic analysis up to 40th harmonic at high, medium and low voltage of the public electric power network with nominal frequency of 50 Hz or 60 Hz.
- Technical specification50 pagesEnglish languagesale 15% off
IEC TR 62786-100:2026 gives guidance for the drafting of IEC publications which relate, wholly or partly, to connection of distributed energy resources (DER) with the grid. Technical committees relevant to the connection of DER with grid are advised to follow the guidance given in this document when they prepare new publications and clauses relevant to the connection of DER with the grid, as well as when they revise existing publications so that consistent and harmonized standards can be delivered. Annex A, Annex B, Annex C, and Annex D list documents relevant to grid connection of DER in order to ensure that other IEC publications are consistent with these documents and to avoid overlapping each other.
Table E.1 lists national and regional standards and regulations relevant to connecting DER with the grid.
- Technical report22 pagesEnglish languagesale 15% off
IEC 60364-8-81:2026 provides additional requirements, measures and recommendations for the design, erection, operation and verification of all types of low-voltage electrical installation including local production and storage of energy for optimizing the overall efficient use of electricity.
It introduces requirements, recommendations and methods for the design and the energy efficiency (EE) assessment of an electrical installation within the framework of an energy efficiency management approach in order to get the best permanent functionally equivalent service for the lowest electrical energy consumption and the optimal availability and acceptable cost-effectiveness.
These requirements, recommendations and methods apply, within the scope of the IEC 60364 series, for new installations and modification of existing installations.
This document is applicable to the electrical installation of a building or system and does not apply to products. The energy efficiency of products and their operational requirements are covered by the relevant product standards.
It is possible that another standard provides specific requirements for a particular system or installation application (e.g. manufacturing system covered by ISO 20140 series).
This document does not specifically provide requirements for building automation systems. The contribution of building automation systems to improve energy efficiency of the installation is considered.
This group energy efficiency publication is primarily intended to be used as an energy efficiency standard for the low-voltage electrical installations mentioned in the scope, but is also intended to be used by technical committees in the preparation of publications, in accordance with the principles laid down in IEC Guide 118
This first edition cancels and replaces the second edition of IEC 60364-8-1 published in 2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) modified numbering that allows IEC 60364-7 subparts to amend this document;
b) alignment of the definitions with IEC 60050-826;
c) introduction of minimum energy moment method in Annex A;
d) improvements in Annex B
- Standard79 pagesEnglish languagesale 15% off
- Standard84 pagesFrench languagesale 15% off
- Standard163 pagesEnglish and French languagesale 15% off
IEC TS 62786-42:2026 defines minimum requirements for AC voltage measurement used to control distributed energy resources (DER) and loads connected to distribution networks.
This document specifies the characteristics of voltage magnitude measurement to evaluate their performances (including voltage and frequency measuring range, accuracy, voltage and frequency operating range, resolution, etc).
This document describes the main use cases of voltage measurement, with associated level of performances.
This document describes the principle of functional tests to evaluate the specified characteristics and defines the influencing factors that affect these performances, under steady state or dynamic conditions.
This document defines the functional requirements applicable to voltage measurement which can be embedded inside DER or loads controller or performed as an external control system. In the case of DER, this document is a subpart of requirements which are defined in the other parts of the IEC 62786 series.
This document is applicable to DER and loads regardless of voltage level at the point of connection to the distribution grid.
This document does not specify hardware, software or a method for voltage measurement. It does not specify tests linked to environmental conditions associated to hardware devices (climatic, mechanical stress, electromagnetic compatibility test, etc).
- Technical specification59 pagesEnglish languagesale 15% off
CORRECTED VERSION 2026-02
IEC TS 63384-2:2026 addresses the quantitative assessment of power system stability and security. Its purpose is to provide guidelines encompassing the use of terms and definitions, as well as the objectives and general requirements for conducting quantitative assessments. The TS includes the classification of stability and security, classification of quantitative indices, and key considerations for implementing quantitative assessments.
The TS is applicable to various domains, including system planning, operation planning, operation control, stability control system design, and stability control decision planning, as well as software, equipment, and systems for the secure and stable operation of the power system.
The stability and security quantitative assessment techniques specified in IEC TS 63384-2 are independent of any specific software, equipment, or systems used for the secure and stable operation of the power system.
This corrected version of IEC TS 63384-2:2026 incorporates the following correction:
– Addition of bibliographic reference numbers in the content
- Technical specification20 pagesEnglish languagesale 15% off
IEC 60364-7-717:2026 applies to electrical installations of mobile units or transportable units.
The requirements of this document are not applicable to:
– generating sets;
– pleasure craft;
– caravans and motor caravans;
– electrical circuits and equipment for automotive purposes.
This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) The scope has been improved, providing more detail.
b) The content of Clause 717.41 has been updated following the publication of IEC 60364-4-41:2005/AMD1:2017.
c) Clauses concerning protection by automatic disconnection of the supply and additional protection have been added.
d) Figures have been simplified, updated or deleted.
e) Designation of SPD has been updated to use Tx SPD instead of Class x tested SPD.
- Standard16 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Standard32 pagesEnglish and French languagesale 15% off
IEC 60364-7-711:2026 applies to:
• electrical installations of temporary structures erected for exhibitions, shows, stands and fairgrounds for entertainment related purposes, and
• temporary electrical installations supplying such temporary structures and amusement devices for entertainment related purposes.
This third edition cancels and replaces the second edition published in 2018 and the first edition of IEC 60364-7-740 published in 2000. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) merging of IEC 60364-7-711 and IEC 60364-7-740;
b) removal of requirements for installations in locations intended for livestock as they are covered by IEC 60364-7-705
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard29 pagesEnglish and French languagesale 15% off
IEC TS 62786-2:2026 supplements IEC TS 62786-1, and specifies requirements for the connection of the solar photovoltaic energy system or photovoltaic generating system (PV system) with an electric power network, or the network. This document covers all sizes of PV systems connected to low voltage or medium voltage power networks and gives typical requirements for various sizes of PV systems.
In this document, requirements for grid-connected PV systems are applied to those categorized as grid tied, grid tied with storage and grid tied with storage and back up. Mini-grid and Micro-grid are out of scope. Those types of PV systems with possible elements are described in 4.3.
This document specifies the following technical requirements for the PV system:
- reference points of requirements,
- elements and configuration,
- basic operation,
- protection and fault ride through function,
- power control and grid support function,
- electromagnetic compatibility for low frequency conducted disturbances,
- information exchange for remote monitoring, control, and configuration.
- Technical specification49 pagesEnglish languagesale 15% off
The particular requirements of this part of IEC 60364 apply to electrical installations in
medical locations so as to provide safety of patients and medical staff. These requirements
refer to:
- hospitals and clinics or equivalent institutions (including equivalent transportable and
mobile locations);
which, subject to assessment (710.30), can also include:
- sanatoriums and health clinics;
- dedicated locations in homes for senior citizens and aged care homes, where patients
receive medical care;
- medical centres, outpatients' clinics and departments, casualty wards;
- other outpatients' institutions (industrial, sports and others);
- medical and dental practices;
- dedicated medical rooms in the workplace;
- other locations where medical electrical equipment is used;
- veterinary clinics;
- rooms in existing installations where a change of utilization for medical applications occur.
This list is not exhaustive.
The requirements of this document do not apply to ME equipment or ME systems.
NOTE 1 Medical ME equipment and ME systems are covered by IEC 60601 (all parts).
NOTE 2 In the USA, the requirements of NFPA 70®, National Electrical Code® in general and specifically article
517 (Healthcare Facilities) apply.
- Standardization document41 pagesEnglish languagee-Library read for1 day
This prAA represents common modifications to prHD 60364-7-710
2019-11-29: no xml because common mod
- Amendment21 pagesEnglish languagee-Library read for1 day
IEC 60364-7-712:2025 applies to electrical installations of PV systems. The equipment of a PV system, like any other item of equipment, is dealt with only so far as its selection and application in the installation is concerned. A PV installation comprises all equipment from PV modules(s) up to the connection point to other parts of the installation, for example a distribution board or the utility supply point (point of connection).
This part of IEC 60364 includes requirements on electrical installation resulting from the installation of PV power supply installations.
Requirements relating to the possible installation of energy storage systems (e.g. batteries) are included.
Requirements are also included for PV installations for island mode operation described in IEC 60364-8-82.
This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The technical content has been extensively revised and expanded, taking into account experience gained in the construction and operation of PV installations, and developments made in technology, since the second edition was published.
b) Key changes include requirements for PV power generation plants, direct connection to battery circuits, introduction of DC bus circuit and DCUs.
- Standard69 pagesEnglish languagesale 15% off
- Standard74 pagesFrench languagesale 15% off
- Standard143 pagesEnglish and French languagesale 15% off
IEC 60364-1:2025 defines the scope and objective of the IEC 60364 series and specifies the fundamental safety requirements for an electrical installation.
This document addresses the fundamental principles, assessment of general characteristics and definitions of low-voltage electrical installations.
This sixth edition cancels and replaces the fifth edition published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the entire document has been restructured and renumbered, maintaining the numbering of the (sub)clauses which are preceded with the part number, i.e. 1.1, 1.2, etc.;
b) the scope has been expanded to include new areas of application and has been restructured;
c) in 1.5.2.2.2, the topic of safety services and standby electric supply systems has been added;
d) in 1.5.2.14, the topic of energy efficiency has been included;
e) in 1.5.2.15, the topic of prosumer electrical installations has been included;
f) in 1.5.3.5, the requirement for an equivalent safety level for the use of new materials and innovations for which no product standards exist yet has been added;
g) in 1.5.4.3, the recommendation to assess the effectiveness of protective measures for the safety of human beings and livestock to be maintained by periodic verification during the entire lifetime of the installation has been added;
h) Table 3 shows the symbol for the newly introduced "system-referencing-conductor (SRC)";
i) the number of figures showing the type of electric system in AC and DC systems is limited to illustrate requirements.
- Standard48 pagesEnglish languagesale 15% off
- Standard51 pagesFrench languagesale 15% off
- Standard99 pagesEnglish and French languagesale 15% off
The particular requirements of this part of IEC 60364 apply to:
- fixed equipment within conducting locations with restricted movement; and
- supplies to equipment used within conducting locations with restricted movement.
- Standardization document16 pagesEnglish languagee-Library read for1 day
The particular requirements of this part of IEC 60364 apply to: - fixed equipment within conducting locations with restricted movement; and - supplies to equipment used within conducting locations with restricted movement.
- Standardization document16 pagesEnglish languagee-Library read for1 day
- Amendment8 pagesEnglish languagee-Library read for1 day
- Corrigendum5 pagesEnglish languagee-Library read for1 day
IEC 60364-8-82:2022 provides requirements and recommendations that apply to low-voltage electrical installations connected or not to a distribution network able to operate:
– with local power supplies, and/or
– with local storage units,
and that monitors and controls the energy from the locally connected sources delivering it to:
– current-using equipment, and/or
– local storage units, and/or
– distribution networks.
Such electrical installations are designated as prosumer's electrical installations (PEIs).
These requirements and recommendations apply to new installations and modifications of existing installations.
This document also provides requirements and recommendations for the safe, efficient and correct behaviour of these installations when integrated into a smart grid.
Information related to grid interaction to ensure the stability of the electrical system for grid connected PEIs is given in Annex B.
This document covers the requirements related to stability of islanded and stand-alone PEIs.
This first edition cancels and replaces IEC 60364-8-2 published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 6036482:2018:
a) the vocabulary and concepts have been aligned as much as possible with those used by TC 8 and SC 8B, taking notably into account the IEC 62898 and IEC 62786 series, still respecting the installers mindset (installers being the first users of the IEC 60364 series and being used to only refer to the IEC 60364 series);
b) the type of system earthing and the change of type of system earthing (sequencing) when there is a change of mode of the prosuming installation, have been clarified;
c) the conditions of connection and disconnection from the DSO network have also been described, both from the safety point of view and the proper functioning point of view;
d) additional requirements have been introduced;
e) the figures have been updated;
f) a new normative Annex D on single dwelling or similar application islandable PEIs has been added;
g) the numbering has also been reviewed to follow the updated numbering system of the IEC 60364 series, in line with the IEC Directives and compatible with Parts 7.
- Standardization document72 pagesEnglish languagee-Library read for1 day
IEC TR 62786-102:2025 provides principles and technical needs for the interconnection of the compressed air energy storage (CAES) system to the distribution network. It is suitable for the planning, design, operation and testing of CAES system interconnection to distribution networks. It includes the additional needs for the CAES system, such as connection scheme, grid-connected process and needs, response characteristics of active power to frequency, response characteristics of active power to current, response characteristics of active power to injecting mass flow, response characteristics of active power to pressure, selection of the point of connection (POC), electromagnetic compatibility (EMC) and power quality, communication and automation, monitoring and protection, immunity to disturbances, grid-connected testing needs, etc. This document will report response of active power to frequency, response of active power to current, response of active power to injecting mass flow, response of active power to pressure, response of reactive power to voltage, and grid-connected testing for distributed CAES system, as a supplement for IEC TS 62786-1:2023. This document reports the interface needs for connecting CAES system to distribution network operating at a nominal frequency of 50 Hz or 60 Hz.
- Technical report39 pagesEnglish languagesale 15% off
- Amendment8 pagesEnglish languagee-Library read for1 day
IEC 60364-8-82:2022 provides requirements and recommendations that apply to low-voltage electrical installations connected or not to a distribution network able to operate: – with local power supplies, and/or – with local storage units, and that monitors and controls the energy from the locally connected sources delivering it to: – current-using equipment, and/or – local storage units, and/or – distribution networks. Such electrical installations are designated as prosumer's electrical installations (PEIs). These requirements and recommendations apply to new installations and modifications of existing installations. This document also provides requirements and recommendations for the safe, efficient and correct behaviour of these installations when integrated into a smart grid. Information related to grid interaction to ensure the stability of the electrical system for grid connected PEIs is given in Annex B. This document covers the requirements related to stability of islanded and stand-alone PEIs. This first edition cancels and replaces IEC 60364-8-2 published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 6036482:2018: a) the vocabulary and concepts have been aligned as much as possible with those used by TC 8 and SC 8B, taking notably into account the IEC 62898 and IEC 62786 series, still respecting the installers mindset (installers being the first users of the IEC 60364 series and being used to only refer to the IEC 60364 series); b) the type of system earthing and the change of type of system earthing (sequencing) when there is a change of mode of the prosuming installation, have been clarified; c) the conditions of connection and disconnection from the DSO network have also been described, both from the safety point of view and the proper functioning point of view; d) additional requirements have been introduced; e) the figures have been updated; f) a new normative Annex D on single dwelling or similar application islandable PEIs has been added; g) the numbering has also been reviewed to follow the updated numbering system of the IEC 60364 series, in line with the IEC Directives and compatible with Parts 7.
- Standardization document72 pagesEnglish languagee-Library read for1 day
- Corrigendum5 pagesEnglish languagee-Library read for1 day
This International Standard applies to Source Switching Equipment, hereafter referred to as SSE(s), for household and similar uses, primarily intended to be used for Energy Efficiency purposes with local production and/or storage of energy.
This standard has been drafted following principles of:
- IEC guides 118 and 119 for Energy Efficiency;
- IEC guide 110 for safety.
SSEs are intended to be installed in low voltage prosumer electrical installations (PEI) to deliver the electrical energy:
- either to current-using equipment (direct feeding mode or island mode);
- or to the grid (reverse feeding mode).
SSEs are intended to select and/or combine two power sources (e.g. selected among grid, local power source, storage units) within an Electrical Energy Management system (EEMS). SSEs may also be used for backup supply.
NOTE SSEs capable to select more than two sources are under consideration.
SSEs are part of the fixed electrical installation.
This standard applies to SSEs for operation in:
- AC single or multiphase circuits with rated voltages not exceeding 440 V AC, frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated currents not exceeding 125 A. They are intended to be used in installations with prospective short circuit current not exceeding 25 000 A, or
- DC circuits. SSE for DC circuits are under consideration (next edition).
SSEs may be operated:
- manually (M-SSE), or
- remotely (R-SSE), or
- automatically (A-SSE), or
- a combination of the above methods of operation, e.g. manual and remote.
SSEs are constructed either as Combined-SSEs (C-SSEs, based on dedicated products suc as circuit breakers, switches or contactors) or Non-Combined SSEs (NC-SSEs).
SSEs are intended for use in circuits where protection against electrical shock and over-current according to IEC 60364 is provided, unless the SSE already contains such protective function.
SSEs are normally installed by instructed persons (IEC 60050-195:1998, 195-04-02) or skilled persons (IEC 60050-195:1998, 195-04-01). SSEs are normally used by ordinary persons (IEC 60005-195:1998, 195-04-03) and do not require maintenance.
The requirements of this standard apply for standard environmental 420 conditions as given in clause 7. They are applicable to SSEs intended for use in an environment with pollution degree 2 and overvoltage categories III according to IEC 60664-1:2020. SSEs have at least a degree of protection IP 20 according to IEC 60529. Additional requirements may be necessary for devices used in locations having more severe environmental conditions.
SSEs do not, by their nature, provide an isolation function nor the overcurrent protection. However, isolation and overcurrent protection functions as covered by relevant product standards may be provided by Combined SSEs.
In some countries, it is not permitted to have synchronization of local sources with the grid for particular grid conditions, e.g. when fluctuations of the grid voltage or frequency are outside the tolerance limits.
This document does not apply to transfer switching equipment (TSE) intended to be used by skilled persons, as covered by IEC 60947-6-1:2021.
- Standard150 pagesEnglish languagee-Library read for1 day
This document specifies test methods for cable management systems (CMS) intended to provide support for intrinsic fire-resistant cables in order to determine their abilities to maintain the function of electrical power cables and signal/control cables for a specified duration when subjected to fire under defined conditions.
This document establishes a non-hierarchical classification for this ability.
Additional devices to fix the cable management systems providing fire resistant support (CMS-support) to the building structure for example screws, anchors etc. are not covered by this document.
CMS intended to provide support and fire protection for cables are tested according to EN 1366-11.
This document does not apply to powertrack systems.
NOTE Rules for testing CMS-support for fibre optic cables according to EN 50582 and communication cables according to EN 50289-4-16 are under consideration.
- Technical specification53 pagesEnglish languagee-Library read for1 day
This document specifies test methods for cable management systems (CMS) intended to provide support for intrinsic fire-resistant cables in order to determine their abilities to maintain the function of electrical power cables and signal/control cables for a specified duration when subjected to fire under defined conditions. This document establishes a non-hierarchical classification for this ability. Additional devices to fix the cable management systems providing fire resistant support (CMS-support) to the building structure for example screws, anchors etc. are not covered by this document. CMS intended to provide support and fire protection for cables are tested according to EN 1366-11. This document does not apply to powertrack systems. NOTE Rules for testing CMS-support for fibre optic cables according to EN 50582 and communication cables according to EN 50289-4-16 are under consideration.
- Technical specification53 pagesEnglish languagee-Library read for1 day
This document specifies transport and security services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies secure communication capabilities by design and supports the building of a secure system architecture.
This document is applicable to the protection of consumer data to ensure privacy.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard91 pagesEnglish languagee-Library read for1 day
This document specifies application services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies application protocols, especially the M-Bus application protocol.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard120 pagesEnglish languagee-Library read for1 day
This document specifies application services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies application protocols, especially the M-Bus application protocol.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard120 pagesEnglish languagee-Library read for1 day
This document specifies transport and security services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies secure communication capabilities by design and supports the building of a secure system architecture.
This document is applicable to the protection of consumer data to ensure privacy.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.
- Standard91 pagesEnglish languagee-Library read for1 day
- Amendment11 pagesEnglish languagee-Library read for1 day
- Amendment11 pagesEnglish languagee-Library read for1 day
IEC 62052-31:2024 specifies general safety requirements and associated tests, with their appropriate conditions for type testing of directly connected, transformer-operated or transducer-operated AC and DC electricity meters and load control equipment. This document applies to electricity metering equipment designed to:
• measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on communication modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays (electromechanical or static meters);
• operate with detached indicating displays, or without an indicating display (static meters only);
• wall-mounted or to be installed in specified matching sockets or racks;
• optionally, provide additional functions other than those for measurement of electrical energy.
This document also applies to transducer-operated meters or meters designed for operation with Low Power Instrument Transformers (LPIT) or sensors (as defined in the IEC 61869 series).
When equipment in scope of this document is designed to be installed in a specified matching socket, then the requirements apply to, and the tests are performed on, equipment installed in its specified matching socket. However, requirements for sockets and inserting / removing the meters from the socket are outside the scope of this document.
This document is also applicable to auxiliary input and output circuits, operation indicators, and test outputs of equipment for electrical energy measurement.
Equipment used in conjunction with equipment for electrical energy measurement and control may need to comply with additional safety requirements. See also Clause 13.
This document does not apply to:
• meters rated to operate with voltage exceeding 1 000 V AC, or 1 500 V DC;
• metering systems comprising multiple devices physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and mobile meter test equipment;
• reference standard meters;
• conventional or low power instrument transformers;
• equipment with solid-state or other non-electromechanical supply and load control switches.
The safety requirements of this document are based on the following assumptions:
• metering equipment has been installed correctly;
• metering equipment is used generally by ordinary persons, including meter readers and consumers of electrical energy. In many cases, it is installed in a way that it is freely accessible. Its terminal covers cannot be removed, and its case cannot be opened without removing seals (if present) and using a tool;
• during normal use all terminal covers, covers and barriers providing protection against accessing hazardous live parts are in place;
• for installation, configuration, maintenance and repair it may be necessary to remove terminal cover(s), (a part of) the case or barriers so that hazardous live parts may become accessible. Such activities are performed by skilled persons, who have been suitably trained to be aware of working procedures necessary to ensure safety. Therefore, safety requirements covering these conditions are out of the Scope of this document.
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. Please see the foreword of IEC 62052-31 f
- Standard215 pagesEnglish languagee-Library read for1 day
IEC 60364-7-701:2019 applies to electrical installations in indoor or outdoor locations where a bath tub and/or a shower is intended to be permanently placed in a specific location.
The extent of the location containing a bath tub and/or a shower is limited by:
– the lowest finished floor level;
– a horizontal plane 3 m above the lowest finished floor level;
– a vertical circumscribing virtual surface at a distance of 4 m from the fixed water outlet for the bath tub or shower; and
– the volume within the walls, floor and ceiling that border the location containing a bath or shower, measured to a depth of 6 cm.
The requirements of this document also apply to fixed electrical installations in mobile applications, for example caravans, mobile homes, shower containers. This document does not apply to emergency facilities, for example emergency showers used in industrial areas or laboratories.
This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– the scope gives precisions relevant to the application of this document;
– the description of zones is improved;
– relevant terms are defined.
- Standardization document29 pagesEnglish languagee-Library read for1 day
IEC 60364-4-44:2024 provides requirements for the safety of electrical installations in the event of voltage disturbances and electromagnetic disturbances generated for different specified reasons. The requirements of this document are not intended to apply to systems for distribution of energy to the public, or power generation and transmission for such systems (see the scope of IEC 60364-1) although such disturbances can be conducted into or between electrical installations via these supply systems. This third edition cancels and replaces the second edition published in 2007, Amendment 1:2015 and Amendment 2:2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the structure of the document has been updated in accordance with the ISO/IEC Directives, Part 2:2021: the terms, definitions and symbols have been regrouped under a new Subclause 440.3, the tables and figures have been renumbered;
b) Clause 443 has been amended to better introduce the DC SPD and to improve some of the wording.
- Standard57 pagesEnglish languagesale 15% off
- Standard116 pagesEnglish languagesale 15% off
2019-11-26: This prAA will provide Common Modifications, A-deviations and SNCs to FprHD ( PR=63183)
- Amendment11 pagesEnglish languagee-Library read for1 day
IEC 60364-5-53:2019 Deals with general requirements for isolation, switching and control and with the requirements for selection and erection of the devices provided to fulfil such functions. This fourth edition cancels and replaces the third edition published in 2001, Amendment 1:2002 and Amendment 2:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision of all clauses except 531 and 534;
b) introduction of a new Clause 537 Monitoring;
c) Clause 530 contains all normative references and all terms and definitions.
- Standard75 pagesEnglish languagesale 15% off
- Standard182 pagesEnglish languagesale 15% off
- Standard152 pagesEnglish and French languagesale 15% off
- Standard369 pagesEnglish and French languagesale 15% off
IEC 60079:2024 contains the specific requirements for the design of electrical systems, selection, installation and the required initial inspection of electrical installations of Ex Equipment in, or associated with, explosive atmospheres including requirements for documentation and personnel competency.
These requirements are in addition to the requirements for installations in non-hazardous areas.
This document applies to all electrical Ex Equipment including fixed, transportable, portable and personal, and installations, permanent or temporary.
This document does not apply to:
• electrical installations in mines susceptible to firedamp;
• inherently explosive situations and dust from explosives or pyrophoric substances (for example explosives manufacturing and processing);
• rooms used for medical purposes;
• electrical installations in areas where the hazard is due to flammable mist; and
• installation of non-electrical Ex Equipment (unless being part of an equipment assembly according IEC TS 60079-46).
No account is taken in this document of the toxic hazards that are associated with flammable gases, liquids and dusts in concentrations that are usually very much less than the lower flammable limit. In locations where personnel could be exposed to potentially toxic concentrations of flammable material, appropriate precautions are necessary. Such precautions are outside the scope of this document.
This sixth edition cancels and replaces the fifth edition published in 2013. This edition constitutes a technical revision. Edition 6 is a major restructure and introduces a number of technical changes from the previous edition (2013), see Table 1 of the foreword for detailed information.
- Standard149 pagesEnglish languagee-Library read for1 day
2019-11-26: This prAA will provide Common Modifications, A-deviations and SNCs to FprHD ( PR=63183)
- Amendment11 pagesEnglish languagee-Library read for1 day
IEC 62052-31:2024 specifies general safety requirements and associated tests, with their appropriate conditions for type testing of directly connected, transformer-operated or transducer-operated AC and DC electricity meters and load control equipment. This document applies to electricity metering equipment designed to: • measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC, or 1 500 V DC; • have all functional elements, including add-on communication modules, enclosed in, or forming a single meter case with exception of indicating displays; • operate with integrated displays (electromechanical or static meters); • operate with detached indicating displays, or without an indicating display (static meters only); • wall-mounted or to be installed in specified matching sockets or racks; • optionally, provide additional functions other than those for measurement of electrical energy. This document also applies to transducer-operated meters or meters designed for operation with Low Power Instrument Transformers (LPIT) or sensors (as defined in the IEC 61869 series). When equipment in scope of this document is designed to be installed in a specified matching socket, then the requirements apply to, and the tests are performed on, equipment installed in its specified matching socket. However, requirements for sockets and inserting / removing the meters from the socket are outside the scope of this document. This document is also applicable to auxiliary input and output circuits, operation indicators, and test outputs of equipment for electrical energy measurement. Equipment used in conjunction with equipment for electrical energy measurement and control may need to comply with additional safety requirements. See also Clause 13. This document does not apply to: • meters rated to operate with voltage exceeding 1 000 V AC, or 1 500 V DC; • metering systems comprising multiple devices physically remote from one another; • portable meters; • meters used in rolling stock, vehicles, ships and airplanes; • laboratory and mobile meter test equipment; • reference standard meters; • conventional or low power instrument transformers; • equipment with solid-state or other non-electromechanical supply and load control switches. The safety requirements of this document are based on the following assumptions: • metering equipment has been installed correctly; • metering equipment is used generally by ordinary persons, including meter readers and consumers of electrical energy. In many cases, it is installed in a way that it is freely accessible. Its terminal covers cannot be removed, and its case cannot be opened without removing seals (if present) and using a tool; • during normal use all terminal covers, covers and barriers providing protection against accessing hazardous live parts are in place; • for installation, configuration, maintenance and repair it may be necessary to remove terminal cover(s), (a part of) the case or barriers so that hazardous live parts may become accessible. Such activities are performed by skilled persons, who have been suitably trained to be aware of working procedures necessary to ensure safety. Therefore, safety requirements covering these conditions are out of the Scope of this document. This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. Please see the foreword of IEC 62052-31 f
- Standard215 pagesEnglish languagee-Library read for1 day
IEC 60364-5-52:2009 deals with the selection and erection of wiring systems. This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previous edition are as follows:
- Subclause 521.4 introduces minor changes with regard to busbar trunking systems and powertrack systems.
- Subclause 523.6 introduces minor changes with regard to the sizing of cables where harmonic currents are present.
- A new sublause 523.9 concerning single-core cables with a metallic covering has been introduced.
- Clause 525 introduces changes in the maximum value of voltage drop permitted between the origin of the consumer's installation and the equipment which should not be greater than that given in the relevant annex.
- Clause 526 introduces minor changes to electrical connections including additional exceptions for inspection of connections and additional notes.
- Clause 528 introduces additional requirements with regard to proximity of underground power and telecommunication cables.
- Clause 529 introduces minor changes to selection and erection of wiring systems in relation to maintainability, including cleaning. The contents of the corrigendum of February 2011 have been included in this copy.
- Standard177 pagesEnglish languagesale 15% off
- Standard171 pagesEnglish and French languagesale 15% off
IEC 60364-4-42:2024 applies to electrical installations with regard to measures for the protection of persons, livestock and property against:
• thermal effects, risk of combustion or degradation of materials, and risk of burns caused by electrical equipment,
• flames in case of a fire hazard being propagated from electrical installations to other fire compartments segregated by barriers which are in the vicinity, and
• the impairment of the safe functioning of electrical equipment, including safety services due to thermal effects.
This group safety publication (GSP) focusing on safety essential requirements is primarily intended to be used as a product safety standard for the installations mentioned in the scope, but is also intended to be used by TCs in the preparation of publications for installations similar to those mentioned in the scope of this GSP, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
One of the responsibilities of a TC is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of its publications
This fourth edition cancels and replaces the third edition published in 2010 and Amendment 1:2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the Scope now includes a new paragraph stating that IEC 60364-4-42 has become a group safety publication (GSP) following the Advisory Committee on Safety (ACOS) recommendation for approval of the group safety function "protection against thermal effects for any kind of low-voltage electrical installations" to TC 64; this GSP is primarily intended to be used as a product safety standard for the installations mentioned in the scope, but also to be used by TCs in the preparation of publications for installations similar to those mentioned in the scope of this GSP;
b) new terms and definitions have been added;
c) a new Subclause 421.6 regarding measures for preventing fires originating from the use of an electrical stove or cooker or hob has been added;
d) the previous Subclause 421.7 was expanded and moved to a new Clause 426: Additional protective measures against thermal effect for locations where consequences of fire are severe;
e) requirements for escape routes have been expanded and modified;
f) requirements for final circuits in BE2 locations have been expanded and modified;
g) requirements for locations with irreplaceable goods or with business critical facilities have been expanded and modified;
h) a new Clause 425 for protection against fire due to fault currents has been added;
i) a new Clause 427 for protection against assembly internal arc faults has been added
- Standard64 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 62052-31:2024 specifies general safety requirements and associated tests, with their appropriate conditions for type testing of directly connected, transformer-operated or transducer-operated AC and DC electricity meters and load control equipment. This document applies to electricity metering equipment designed to:
• measure and control electrical energy on electrical networks (mains) with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on communication modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays (electromechanical or static meters);
• operate with detached indicating displays, or without an indicating display (static meters only);
• wall-mounted or to be installed in specified matching sockets or racks;
• optionally, provide additional functions other than those for measurement of electrical energy.
This document also applies to transducer-operated meters or meters designed for operation with Low Power Instrument Transformers (LPIT) or sensors (as defined in the IEC 61869 series).
When equipment in scope of this document is designed to be installed in a specified matching socket, then the requirements apply to, and the tests are performed on, equipment installed in its specified matching socket. However, requirements for sockets and inserting / removing the meters from the socket are outside the scope of this document.
This document is also applicable to auxiliary input and output circuits, operation indicators, and test outputs of equipment for electrical energy measurement.
Equipment used in conjunction with equipment for electrical energy measurement and control may need to comply with additional safety requirements. See also Clause 13.
This document does not apply to:
• meters rated to operate with voltage exceeding 1 000 V AC, or 1 500 V DC;
• metering systems comprising multiple devices physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and mobile meter test equipment;
• reference standard meters;
• conventional or low power instrument transformers;
• equipment with solid-state or other non-electromechanical supply and load control switches.
The safety requirements of this document are based on the following assumptions:
• metering equipment has been installed correctly;
• metering equipment is used generally by ordinary persons, including meter readers and consumers of electrical energy. In many cases, it is installed in a way that it is freely accessible. Its terminal covers cannot be removed, and its case cannot be opened without removing seals (if present) and using a tool;
• during normal use all terminal covers, covers and barriers providing protection against accessing hazardous live parts are in place;
• for installation, configuration, maintenance and repair it may be necessary to remove terminal cover(s), (a part of) the case or barriers so that hazardous live parts may become accessible. Such activities are performed by skilled persons, who have been suitably trained to be aware of working procedures necessary to ensure safety. Therefore, safety requirements covering these conditions are out of the Scope of this document.
This second edition cancels and replaces the first edition published in 2015. This edition constitutes a technical revision. Please see the foreword of IEC 62052-31 for more details
- Standard428 pagesEnglish and French languagesale 15% off
This part of IEC 62053 applies only to static watt-hour meters of accuracy classes 0,5 and 1 for the measurement of DC electrical energy in DC systems, and it applies to their type tests only.
NOTE 1 For other general requirements, such as safety, dependability, etc., see the relevant parts of IEC 62052 or IEC 62059.
This document applies to electricity metering equipment designed to:
- measure and control electrical energy on electrical networks with two poles where one of the poles is connected to earth and with voltage up to 1 500 V DC;
NOTE 2 There are DC networks with other configurations or with more than 2 poles (for example networks with earth and both a positive and a negative pole).
- have all functional elements, including add-on modules, enclosed in, or forming a single meter case with the exception of indicating displays;
- operate with integrated or detached indicating displays, or without an indicating display;
- be installed in a specified matching socket or rack;
- optionally, provide additional functions other than those for measurement of electrical energy.
They may be used for measuring DC electrical energy, amongst others, in the following application areas:
- in EV (electrical vehicle) charging stations or in EV charging infrastructures, if the measurement is placed on the DC side;
- in information technology (IT) server farms;
- in DC supply points for communication equipment;
- in low voltage DC networks for residential or commercial areas, if the measurement is placed on the DC side;
- in solar PV (photovoltaic) systems where DC power generation is measured;
- in DC supply points for public transport networks (e.g. trolleybus, etc.).
Meters designed for operation with low power instrument transformers, LPITs as defined in the IEC 61869 series, may be tested for compliance with this document only if such meters and their LPITs are tested together and meet the requirements for directly connected meters.
NOTE 3 Modern electricity meters typically contain additional functions such as measurement of voltage magnitude, current magnitude, power, etc.; measurement of power quality parameters; load control functions; delivery, time, test, accounting, recording functions; data communication interfaces and associated data security functions. The relevant standards for these functions may apply in addition to the requirements of this document. However, the requirements for such functions are outside the scope of this document.
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 60364-7-706:2024 applies to:
• fixed equipment within conducting locations with restricted movement; and
• supplies to equipment used within conducting locations with restricted movement.
This third edition cancels and replaces the second edition published in 2005 and Amendment 1:2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The structure of clauses 706.41X has been updated following the structure of IEC 60364-4-41:2005 and IEC 60364-4-41:2005/AMD1:2017.
- Standard20 pagesEnglish and French languagesale 15% off
IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).
- Standardization document14 pagesEnglish languagee-Library read for1 day