83 - RUBBER AND PLASTICS INDUSTRIES
ICS 83 Details
RUBBER AND PLASTICS INDUSTRIES
GUMMIINDUSTRIE. KUNSTSTOFFINDUSTRIE
INDUSTRIES DES ELASTOMERES ET DES PLASTIQUES
GUMARSKA INDUSTRIJA IN INDUSTRIJA POLIMERNIH MATERIALOV
General Information
Frequently Asked Questions
ICS 83 is a classification code in the International Classification for Standards (ICS) system. It covers "RUBBER AND PLASTICS INDUSTRIES". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 12374 standards classified under ICS 83 (RUBBER AND PLASTICS INDUSTRIES). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 83 - RUBBER AND PLASTICS INDUSTRIES
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the performance and test requirements of hose assemblies supplied in assembled condition using rubber hose according to ISO 3821 up to and including nominal size 20,0, for gas welding, cutting and allied processes. This document is not applicable to high-pressure hose assemblies upstream of the pressure regulators.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies the method of the peel test using a tensile testing machine to evaluate the adhesion strength of metallic coatings on plastic substrates under controlled temperatures. It also specifies the designations of the peel test results. The designation consists of the adhesion of metallic coatings to the substrate and test temperature, as well as the substrate material and the principal component, manufacturing process and thickness of the metallic coatings.
- Standard26 pagesEnglish languagesale 15% off
This document specifies a method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions by gravimetric measurement of the amount of carbon dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the humidity, aeration and temperature of the composting vessel.
The method applies to the following materials:
natural and/or synthetic polymers and copolymers, and mixtures of these;
plastic materials that contain additives such as plasticizers or colorants;
water-soluble polymers;
materials that, under the test conditions, do not inhibit the activity of microorganisms present in the inoculum.
NOTE If the test material inhibits microorganisms in the inoculum, another type of mature compost or pre-exposure compost can be used.
- Draft26 pagesEnglish languagee-Library read for1 day
This document specifies requirements for factory made, self-supporting, double skin metal‑faced insulating sandwich panels where the insulating core materials are intended to be but not limited to cellular plastics and mineral wool as defined below. The sandwich panels are intended for discontinuous laying in the following applications: roofs and roof cladding; external walls and wall cladding. The insulating core materials covered by this document are rigid polyurethane foam (PUR), polyisocyanurate foam (PIR), expanded polystyrene foam (EPS), extruded polystyrene foam (XPS), phenolic foam (PF) and mineral wool. Sandwich panels with edge details that utilize different materials from the main insulating core are included in this document. Sandwich panels used in outdoor cold storage applications are included in this document. This document does not cover the following: sandwich panels with a declared thermal conductivity for the insulating core material greater than 0,06 W/m·K at 10 °C, or greater than 0,06 W/m·K at 23 °C; sandwich panels consisting of two or more clearly defined layers of different insulating core materials (multi-layered); sandwich panels consisting of more than one metal sheet per face; sandwich panels with perforated facing(s); curved sandwich panels; indoor cold storage applications.
- Standard132 pagesEnglish languagesale 15% off
This document specifies methods for the manual ultrasonic examination of heated tool, electrofusion, extrusion and hot gas joints in plastics materials. It applies to joints in single wall pipes and plates. The range of thicknesses covered is from 10 mm to 100 mm.
This document does not specify acceptance levels of the indications.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies a method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions by gravimetric measurement of the amount of carbon dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the humidity, aeration and temperature of the composting vessel. The method applies to the following materials: natural and/or synthetic polymers and copolymers, and mixtures of these; plastic materials that contain additives such as plasticizers or colorants; water-soluble polymers; materials that, under the test conditions, do not inhibit the activity of microorganisms present in the inoculum. NOTE If the test material inhibits microorganisms in the inoculum, another type of mature compost or pre-exposure compost can be used.
- Standard21 pagesEnglish languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
This document specifies methods for the manual ultrasonic examination of heated tool, electrofusion, extrusion and hot gas joints in plastics materials. It applies to joints in single wall pipes and plates. The range of thicknesses covered is from 10 mm to 100 mm.
This document does not specify acceptance levels of the indications.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for pipes and fittings which are part of piping systems for the rehabilitation, by means of renovation and trenchless replacement, of underground gas supply networks.
It is applicable to polyethylene (PE) pipes, fittings and assemblies, as manufactured and as installed. It is not applicable to the existing pipeline.
This document is applicable to the following technique families for renovation, intended to be used at an operating temperature of 20 °C as a reference temperature:
lining with continuous pipes;
lining with close-fit pipes.
This document is applicable to the following technique families for trenchless replacement, intended to be used at an operating temperature of 20 °C as a reference temperature:
pipe bursting and pipe extraction;
horizontal directional drilling and impact moling.
This document is applicable to:
PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;
PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex D, where all layers have the same minimum required strength (MRS) rating.
Furthermore, when used with lining with continuous pipes and trenchless replacement, this document is applicable to:
PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe (“coated pipe”), as specified in Annex D.
NOTE When used with lining with close-fit lining pipes, the lining pipe is reduced in the factory or on site to provide a close-fitting independent or interactive pressure pipe liner.
This document is applicable to jointing by means of butt fusion and electrofusion and to fabricated and injection-moulded fittings and mechanical connections of PE.
This document is not applicable to push-fit jointed discrete pipes assembled as part of the trenchless installation process.
- Standard50 pagesEnglish languagee-Library read for1 day
This document specifies the classifications, requirements and test methods for non-covered unplasticized poly(vinyl chloride) (PVC-U) profiles intended to be used for the fabrication of windows and doors.
NOTE For editorial reasons in this document the term “window” is used for window/door.
- Standard26 pagesEnglish languagee-Library read for1 day
This document specifies a method for exposing specimens made from poly(vinyl chloride) (PVC) based profiles to xenon-arc radiation, in order to assess changes in characteristics.
It is applicable to PVC based profiles including those covered with foil, paint, print, thermo-laminated foils or coextruded.
NOTE The determination of changes in colour and variations of properties after exposure of PVC based profiles to xenon-arc radiation is described in an informative Annex A.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies three methods for the determination of ash from raw rubbers, compounded rubbers and vulcanizates. The methods are applicable to raw, compounded or vulcanized rubbers of the M, N, O, R and U families described in ISO 1629 [1], except that: Method A is not used for the determination of ash from compounded or vulcanized rubbers containing chlorine, bromine or iodine; Method B is used for compounded or vulcanized rubbers containing chlorine, bromine or iodine. It is not applicable to uncompounded rubbers; Method C is intended to be used for the determination of ash from raw, compounded or vulcanized rubber not containing chlorine, bromine or iodine by wrapping the test portion in ashless filter paper; lithium and fluorine compounds can react with silica crucibles to form volatile compounds, giving low ash results. This document does not cover the interpretation of the ash results as to the inorganic chemical content of a compound or vulcanizate, which is the responsibility of the analyst, who must be aware of the behaviour of rubber additives at elevated temperatures.
- Standard6 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document gives the specifications of the thermoplastic water meter cabinets. It specifies the thickness of material, design drawing, dimensions and accessories incorporated into the construction of it for pipe sizes from 12,7 mm to 31,75 mm.
- Standard5 pagesEnglish languagesale 15% off
This document specifies methods for measuring rolling resistance, under controlled laboratory conditions, for new pneumatic tyres designed primarily for use on motorcycles. The relationship between values obtained and the fuel economy of the vehicle is undetermined, and such values are not intended to be used to indicate levels of performance or quality. This document applies to motorcycle tyres.
- Standard21 pagesEnglish languagesale 15% off
This document specifies sampling and test methods for the determination of the general characteristics of organic chemicals such as accelerators, antidegradants (including wax) and vulcanizing agents (excluding peroxides).
- Standard51 pagesEnglish languagesale 15% off
This document describes methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in test liquids. The liquids concerned include current service liquids, such as petroleum derivatives, organic solvents and chemical reagents, as well as reference test liquids.
- Standard30 pagesEnglish languagesale 15% off
- Standard32 pagesFrench languagesale 15% off
This document specifies the requirements for rubber tubing and hoses used in diesel fuel circuits for internal combustion engines. The diesel fuels covered include “bio-diesels” which consist of the methyl ester of rape seed oil at levels up to 20 % by volume in conventional diesel fuels. NOTE See Annex E for a detailed description of the “line call-out” used in tests for specific original equipment manufacturer (OEM) applications.
- Standard18 pagesEnglish languagesale 15% off
This document specifies the method for measuring the relative snow grip performance index of a candidate tyre compared to a reference, under loaded conditions for new tyres intended to be used on passenger car, commercial vehicle, truck and bus vehicles on a snow packed surface. This document applies to all passenger car, commercial vehicle, truck and bus tyres.
- Standard20 pagesEnglish languagesale 15% off
This document specifies geometrical and dimensional tolerances for plastic moulded parts including: limits of technical manufacturability according to the manufacturing effort for direct tolerances; general tolerances of plastic moulded parts; acceptance conditions of plastic moulded parts; modification of the drawing default according to ISO 8015, in accordance to the environmental conditions common in the plastics industry. This document is applicable to non-porous moulded parts made from thermoplastics, thermoplastic elastomers and thermosets of thermoplastics, made by injection moulding, injection compression moulding, transfer moulding, compression moulding and rotational moulding. This document is applicable to other plastic processes, if agreed to by the contractual parties. Moulded part surface imperfections such as sink marks, undesired flow structures and roughness, as well as joint lines are not addressed in this document.
- Standard34 pagesEnglish languagesale 15% off
This document specifies a method for exposing specimens made from poly(vinyl chloride) (PVC) based profiles to xenon-arc radiation, in order to assess changes in characteristics.
It is applicable to PVC based profiles including those covered with foil, paint, print, thermo-laminated foils or coextruded.
NOTE The determination of changes in colour and variations of properties after exposure of PVC based profiles to xenon-arc radiation is described in an informative Annex A.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies the classifications, requirements and test methods for non-covered unplasticized poly(vinyl chloride) (PVC-U) profiles intended to be used for the fabrication of windows and doors.
NOTE For editorial reasons in this document the term “window” is used for window/door.
- Standard26 pagesEnglish languagee-Library read for1 day
This document specifies chemical resistance testing of coatings on plastics, plastics composites and similar substrates, hereinafter collectively referred to as plastics. This document shows the potential effect of plastics on the behaviour of the coating during chemical resistance testing.
- Standard7 pagesEnglish languagesale 15% off
This document specifies the weathering and irradiation testing of coatings on plastics, plastics composites and similar substrates, hereinafter collectively referred to as plastics. This document shows the potential effect of plastics on the behaviour of the coating during weathering and irradiation testing.
- Standard14 pagesEnglish languagesale 15% off
This document specifies the abrasion and scratch tests of coatings on plastics, plastics composites, and similar substrates, hereinafter collectively referred to as plastics. This document shows the potential effect of plastics on the behaviour of the coating during abrasion and scratch testing.
- Standard13 pagesEnglish languagesale 15% off
This document specifies the applicability of general test methods for coatings resulting from paints and varnishes (hereinafter referred to as “coatings”) on plastics, plastics composites and similar substrates, hereinafter collectively referred to under the term “plastics”. It provides a general introduction to the particularities of coatings on plastics.
- Standard12 pagesEnglish languagesale 15% off
This document specifies infrared spectroscopic methods using the transmission and attenuated total reflectance (ATR) methods for the identification of rubbers, including thermoplastic elastomers, either in the raw state or in the form of vulcanized or unvulcanized mixes. The methods specified are qualitative methods only.
- Standard79 pagesEnglish languagesale 15% off
- Draft67 pagesFrench languagesale 15% off
This document specifies methods for determining the compressive strength, the corresponding compressive strain, the compressive stress at 10 % nominal compressive strain, and the compressive modulus of rigid cellular plastics.
Two procedures are specified. Procedure A and Procedure B.
Procedure A utilizes the compression plate displacement for the nominal property determination. It is used to determine:
compressive strength and the corresponding nominal compressive strain;
compressive stress at 10 % nominal compressive strain;
nominal compressive modulus.
Procedure B uses an extensometer and determines the conventional properties. It is used to determine:
compressive strength and the corresponding compressive strain;
compressive modulus.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies a general audit and quality system requirements for the production, which is a common part for every manufacturer of every kind of supplementary grip device (SGD).
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies methods for determining the compressive strength, the corresponding compressive strain, the compressive stress at 10 % nominal compressive strain, and the compressive modulus of rigid cellular plastics.
Two procedures are specified. Procedure A and Procedure B.
Procedure A utilizes the compression plate displacement for the nominal property determination. It is used to determine:
compressive strength and the corresponding nominal compressive strain;
compressive stress at 10 % nominal compressive strain;
nominal compressive modulus.
Procedure B uses an extensometer and determines the conventional properties. It is used to determine:
compressive strength and the corresponding compressive strain;
compressive modulus.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the apparent volatile-matter content in pre-impregnated yarns, tapes, mats (SMC) and fabrics. The method is applicable to all unidirectional and multidirectional fibre-reinforced prepregs and all thermosetting-resin matrices, unless otherwise specified in product specifications. The method does not apply to unimpregnated reinforcement fibres. NOTE For products with a polyester-resin matrix (UP), the result will be lower than the real value.
- Standard5 pagesEnglish languagesale 15% off
This document specifies the constant climate and alternating climate testing of coatings on plastics, plastics composites and similar substrates, hereinafter collectively referred to as plastics. This document shows the potential effect of plastics on the behaviour of the coating during climate testing.
- Standard8 pagesEnglish languagesale 15% off
This document explores and analyses the differences in the three-point bending test between circular-section tubes and cambered triangular thin-walled tubes, both fabricated from fibre-reinforced plastic, in view of the asymmetric characteristic of the cross-section of cambered triangular thin-walled tubes.
- Technical report14 pagesEnglish languagesale 15% off
This document specifies the testing of the stone-chip resistance testing of coatings on plastics, plastics composites and similar substrates, hereinafter collectively referred to as plastics. This document shows the potential effect of plastics on the behaviour of the coating during stone-chip resistance testing.
- Standard6 pagesEnglish languagesale 15% off
This document specifies a general audit and quality system requirements for the production, which is a common part for every manufacturer of every kind of supplementary grip device (SGD).
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies methods for determining the compressive strength, the corresponding compressive strain, the compressive stress at 10 % nominal compressive strain, and the compressive modulus of rigid cellular plastics. Two procedures are specified. Procedure A and Procedure B. Procedure A utilizes the compression plate displacement for the nominal property determination. It is used to determine: compressive strength and the corresponding nominal compressive strain; compressive stress at 10 % nominal compressive strain; nominal compressive modulus. Procedure B uses an extensometer and determines the conventional properties. It is used to determine: compressive strength and the corresponding compressive strain; compressive modulus.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies a method for exposing plastics to concentrated solar radiation using reflecting concentrators to accelerate the weathering processes. The purpose is to assess property changes produced after specified stages of such exposures. The reflecting concentrators used in these exposures are sometimes referred to as “Fresnel reflectors” because, in cross-section, the array of mirrors used to concentrate the solar radiation resembles the cross-section of a Fresnel lens.
General guidance concerning the scope of the ISO 877 series is given in ISO 877-1.
NOTE Additional information about solar concentrating exposures, including a partial list of standards in which they are specified, is given in the Bibliography.
- Standard18 pagesEnglish languagee-Library read for1 day
This document describes a method that demonstrates the use of polyethylene reference film (PERF) for monitoring laboratory and outdoor conditions as a weathering reference material in weathering tests used for plastics.
- Technical report24 pagesEnglish languagesale 15% off
This document specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics. The particular conditions chosen can be included in the specifications for the plastic material in question.
Particular conditions applicable to poly(alkylene terephthalate) materials, unplasticized cellulose acetate, polyamides and poly(vinyl chloride) plastics, including some specific filled, glass-fibre-reinforced and flame-retarded materials, are specified in ISO 3451-2, ISO 3451-3, ISO 3451-4 and ISO 3451-5.
- Standard17 pagesEnglish languagee-Library read for1 day
This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing of load-bearing timber products only.
It also classifies “adhesive product lines” where all the products within the line have the same chemical composition except for a different amount of catalyst.
This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions.
The performance requirements of this document are applicable to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.
This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document.
This does neither allow nor forbid the use of adhesives in combination with the spraying of water.
- Standard24 pagesEnglish languagee-Library read for1 day
This document establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing conditions of load-bearing timber products only.
This document only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.
The performance requirements of this document are applicable to the adhesive only, not to the manufacturing timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies performance requirements for alternative core laminates intended for interior use, the core layer compositions of which are not covered by EN 438-3 [1], EN 438-4 [2], EN 438-5 [3], EN 438-6 [4] and EN 438-8 [5]. The core layer types (coloured core layer and metal reinforced core layer) are specified in this part of the EN 438 series.
NOTE Regarding the test methods relevant to this document, see EN 438-2.
- Standard16 pagesEnglish languagee-Library read for1 day
This document compiles scientific and technical information on the composition of ELT derived rubbers aiming at helping ELT recyclers and producers of ELT derived rubbers complying with the main requirements of the European CLP and REACH regulations.
This document builds on existing literature data and on the REACH guidance on waste and recovered substances to:
— identify the relevant hazardous substances expected in ELT derived rubbers and the expected concentration ranges;
— assess the hazardous classification of the material according to the CLP Regulation;
— support the exemption from REACH registration requirements as provided by article 2.7(d) to REACH.
- Technical report33 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining the ability of adhesive bonds to resist static load. It is applicable to adhesives used in load bearing timber structures.
It is applicable for the following applications:
a) for assessing the compliance of adhesives according to EN 301, EN 15425, EN 16254, EN 17334 and EN 17418;
b) for assessing the suitability and quality of adhesives for load-bearing timber structures;
c) for assessing the effect on the bond strength resulting from constant load at different climate conditions.
This method is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended to provide data for structural design and does not necessarily represent the performance of the bonded member in service.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the determination of aldehydes and ketones content in polyether polyols and polymer polyols by high performance liquid chromatography (HPLC). This document is applicable to the determination of formaldehyde (HCHO), acetaldehyde (CH3CHO), acrolein (CH2=CHCHO) and acetone (CH3COCH3) in polyether polyols and polymer polyols.
- Standard8 pagesEnglish languagesale 15% off
This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing of load-bearing timber products only.
It also classifies “adhesive product lines” where all the products within the line have the same chemical composition except for a different amount of catalyst.
This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions.
The performance requirements of this document are applicable to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.
This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document.
This does neither allow nor forbid the use of adhesives in combination with the spraying of water.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining the ability of adhesive bonds to resist static load. It is applicable to adhesives used in load bearing timber structures.
It is applicable for the following applications:
a) for assessing the compliance of adhesives according to EN 301, EN 15425, EN 16254, EN 17334 and EN 17418;
b) for assessing the suitability and quality of adhesives for load-bearing timber structures;
c) for assessing the effect on the bond strength resulting from constant load at different climate conditions.
This method is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments.
This method is not intended to provide data for structural design and does not necessarily represent the performance of the bonded member in service.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics. The particular conditions chosen can be included in the specifications for the plastic material in question.
Particular conditions applicable to poly(alkylene terephthalate) materials, unplasticized cellulose acetate, polyamides and poly(vinyl chloride) plastics, including some specific filled, glass-fibre-reinforced and flame-retarded materials, are specified in ISO 3451-2, ISO 3451-3, ISO 3451-4 and ISO 3451-5.
- Standard17 pagesEnglish languagee-Library read for1 day
This document establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing conditions of load-bearing timber products only.
This document only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions.
The performance requirements of this document are applicable to the adhesive only, not to the manufacturing timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies performance requirements for alternative core laminates intended for interior use, the core layer compositions of which are not covered by EN 438-3 [1], EN 438-4 [2], EN 438-5 [3], EN 438-6 [4] and EN 438-8 [5]. The core layer types (coloured core layer and metal reinforced core layer) are specified in this part of the EN 438 series.
NOTE Regarding the test methods relevant to this document, see EN 438-2.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the classification codes of tyres for agricultural and forestry tractors and machines.
- Standard3 pagesEnglish languagesale 15% off
This document establishes a method for measurement of specific heat capacity, cp, using temperature modulated differential scanning calorimetry.
- Standard13 pagesEnglish languagesale 15% off