49.060 - Aerospace electric equipment and systems
ICS 49.060 Details
Aerospace electric equipment and systems
Elektrische Anlagen. Flugzeugbordnetze
Équipement et systemes électriques aérospatiaux
Letalska in vesoljska električna oprema in sistemi
General Information
Frequently Asked Questions
ICS 49.060 is a classification code in the International Classification for Standards (ICS) system. It covers "Aerospace electric equipment and systems". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 3237 standards classified under ICS 49.060 (Aerospace electric equipment and systems). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 49.060 - Aerospace electric equipment and systems
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the required characteristics of sealing plugs, class T, for use in elements of electrical and optical connection containing cable (wire) sealing grommets, according to EN 4529-002. It is used together with EN 4529-001.
- Draft12 pagesEnglish languagee-Library read for1 day
This document specifies the female coding and attachment system for mounting on free housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from -55 °C to 175 °C.
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the protective cover for all receptacles series 2 and series 31 used in the family of rectangular electrical connectors.
The receptacle connectors corresponding to those protective covers are specified in EN 4165-004, EN 4165-011 and EN 4165-025.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the female coding and attachment system for mounting on free housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from -55 °C to 175 °C.
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the protective cover for all receptacles series 2 and series 31 used in the family of rectangular electrical connectors.
The receptacle connectors corresponding to those protective covers are specified in EN 4165-004, EN 4165-011 and EN 4165-025.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, inspection and test methods, quality assurance and delivery conditions, for P, Q and saddle clamps with rubber cushion, used for aerospace applications.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies the design requirements (and tests) for the crimping of insulated and non-insulated joints to general purpose electrical cables for aircraft, with conductors of copper, copper alloy, aluminium or aluminium alloy, in locations in which the stabilized conductor temperature does not exceed the values specified for the relevant type of cable, i.e. 105 °C, 190 °C or 260 °C. This document specifies the type of cable to use for the joints (see 4.1). The document also contains recommendations relating to the inspection of such connections and the tools used to perform the crimping operation. Because satisfactory crimping is dependent upon the maintenance and setting of tools, it also contains recommendations for tests to confirm their serviceability. NOTE Testing of crimped joints to assess their suitability for aircraft shows that certain environmental conditions, for example vibration, have no significant effect on the performance of the joints. Therefore, such tests are not provided in this document.
- Standard13 pagesEnglish languagesale 15% off
This document specifies the required characteristics, inspection and test methods, quality assurance and delivery conditions, for P, Q and saddle clamps with rubber cushion, used for aerospace applications.
- Standard11 pagesEnglish languagee-Library read for1 day
IEC TS 62564-1:2026 defines the minimum requirements for integrated circuits and semiconductors which are designated as an "aerospace qualified electronic component (AQEC)".
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of optional ADHP PPAP;
b) revision to Annex B; addition of Annex C and Annex D;
c) removal of STACK;
d) general update to referenced standards throughout.
- Technical specification23 pagesEnglish languagesale 15% off
- Technical specification47 pagesEnglish languagesale 15% off
This document specifies the required characteristics of a light weight coaxial cable, 50 Ω, type KW for use in aircraft electrical systems at operating temperature between −55 °C and 180 °C and specially for high frequency up to 6 GHz. Nevertheless, if needed, −65 °C is also acceptable as shown by rapid change of temperature test.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics of a light weight coaxial cable, 50 Ω, type KX for use in aircraft electrical systems at operating temperature between −55 °C and 200 °C and specially for high frequency up to 6 GHz. Nevertheless, if needed, −65 °C is also acceptable as shown by rapid change of temperature test.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics of a light weight coaxial cable, 50 Ω, type KW for use in aircraft electrical systems at operating temperature between −55 °C and 180 °C and specially for high frequency up to 6 GHz. Nevertheless, if needed, −65 °C is also acceptable as shown by rapid change of temperature test.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics of a light weight coaxial cable, 50 Ω, type KX for use in aircraft electrical systems at operating temperature between −55 °C and 200 °C and specially for high frequency up to 6 GHz. Nevertheless, if needed, −65 °C is also acceptable as shown by rapid change of temperature test.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-044.
Double crimping contact has a barrel which is designed to crimp conductor and jacket of cable in two locations, one on the conductor and the other on the jacket. This way it protects the conductor from mechanical strengths.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 070, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 003, EN 3155 009 and EN 3155 071.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 045.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in the standards of relays associated to the relay bases listed in EN 3155 002.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated female contacts are specified in EN 3155-003 and EN 3155-009.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155 002.
It is intended to be used together with EN 3155 001.
The associated male contacts are specified in EN 3155 008 and EN 3155 070.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to male electrical Quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, classes P, R and S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 075.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-074.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 015, type A, crimp, class S, used in elements of connection specified in EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-014.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 003, type A, crimp, class S used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in EN 3155 008.
- Standard23 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of the jam-nut mounted receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of –65 °C to 175 °C or 200 °C continuous. It is applicable to models specified in Table 4. For contacts, filler plugs and rear accessories associated with this receptacle, see EN 3646-002. For plugs and protective covers, see EN 3646-008 and EN 3646-009 respectively.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the performances and contact arrangements groups for bayonet coupling circular connectors, intended for use in an operating temperature range of −65 °C to 175 °C or 200 °C continuous.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
It is applicable to models specified in Table 4.
For plugs and protective covers, see EN 3646-008 and EN 3646-009 respectively.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the male coding and attachment system for mounting on fixed housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from −55 °C to 175 °C.
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of square flange mounted receptacles with integrated accessory in the family of circular electrical connectors coupled by threaded ring.
It is applicable to classes specified in Table 3.
For contacts and filler plugs associated with this receptacle, see EN 2997 002. For plugs, see EN 2997 008 and EN 2997 016 and for protective covers, see EN 2997 009.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 003, type A, crimp, class S used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in EN 3155 008.
- Standard23 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 015, type A, crimp, class S, used in elements of connection specified in EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-014.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to male electrical Quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, classes P, R and S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 075.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155 002.
It is intended to be used together with EN 3155 001.
The associated male contacts are specified in EN 3155 008 and EN 3155 070.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 070, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 003, EN 3155 009 and EN 3155 071.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated female contacts are specified in EN 3155-003 and EN 3155-009.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical quadrax contacts, shielded, size 8, type E characteristic impedance 100 Ω, crimp, class R, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-074.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-044.
Double crimping contact has a barrel which is designed to crimp conductor and jacket of cable in two locations, one on the conductor and the other on the jacket. This way it protects the conductor from mechanical strengths.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155 002.
It is used together with EN 3155 001.
The associated male contacts are specified in the standards of relays associated to the relay bases listed in EN 3155 002.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the required characteristics, tests and tooling applicable to electrical contacts, male 044, type A, double crimping, class T, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The associated female contacts are specified in EN 3155 045.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C or 200 °C continuous.
It is applicable to models specified in Table 4.
For plugs and protective covers, see EN 3646-008 and EN 3646-009 respectively.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the performances and contact arrangements groups for bayonet coupling circular connectors, intended for use in an operating temperature range of −65 °C to 175 °C or 200 °C continuous.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the male coding and attachment system for mounting on fixed housing in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from −55 °C to 175 °C.
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of the jam-nut mounted receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of –65 °C to 175 °C or 200 °C continuous.
This document applies to models specified in Table 4.
For contacts, filler plugs and rear accessories associated with this receptacle, see EN 3646 002. For plugs and protective covers, see EN 3646 008 and EN 3646 009 respectively.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of square flange mounted receptacles with integrated accessory in the family of circular electrical connectors coupled by threaded ring.
It is applicable to classes specified in Table 3.
For contacts and filler plugs associated with this receptacle, see EN 2997 002. For plugs, see EN 2997 008 and EN 2997 016 and for protective covers, see EN 2997 009.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies a method for the high temperature exposure of protection sleeves for electrical cable and cable bundles for aerospace applications.
It is used together with EN 6059-100.
- Standard5 pagesEnglish languagee-Library read for1 day
This document specifies a method of testing the fire resistance of "fire-proof" electrical cables.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies methods for measuring the transfer impedance of a cable.
It is intended to be used together with EN 3475-100 and IEC 62153-4-3.
- Standard5 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of close tolerance pins, swage locking, 100° countersunk reduced head, shear type, in aluminium alloy 7050-T73 with chemical film, inch series, with a maximum operating temperature of 80 °C for aerospace application.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies methods for measuring the structural return loss of symmetrical cables for digital data transmission.
It is applicable together with EN 3475-100 and EN 50289-1-11. Attention is drawn in particular to correction procedures detailed in EN 50289-1-11:2016, Annex B, to minimize negative effects of cable preparation in the purpose of high frequency range measurements.
- Standard5 pagesEnglish languagee-Library read for1 day
This document specifies a method of testing the fire resistance of "fire-proof" electrical cables.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies methods for measuring the structural return loss of symmetrical cables for digital data transmission.
It is applicable together with EN 3475-100 and EN 50289-1-11. Attention is drawn in particular to correction procedures detailed in EN 50289-1-11:2016, Annex B, to minimize negative effects of cable preparation in the purpose of high frequency range measurements.
- Standard5 pagesEnglish languagee-Library read for1 day