oSIST prEN 15755-1:2008

SLOVENSKI STANDARD
01-maj-2008
Steklo v gradbeništvu - Samolepljiva polimerna steklena folija - 1. del: Definicije in
opisi
Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and
descriptions
Glas im Bauwesen - Glas mit selbstklebender Polymerfolie - Teil 1: Begriffe und
Beschreibungen
Verre dans la construction - Verre avec film polymère adhésif - Partie 1 : Définitions et
descriptions
Ta slovenski standard je istoveten z: prEN 15755-1
ICS:
01.040.81
81.040.20
83.140.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2008
ICS
English Version
Glass in building - Adhesive backed polymeric filmed glass -
Part 1: Definitions and descriptions
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15755-1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.4
1 Scope.4
2 Normative References.4
3 Definitions.5
4 Glass Substrate.8
5 Product definitions.8
5.1 General.8
5.2 Solar control.8
5.3 Safety.9
5.4 Security.9
5.4.1 General.9
5.4.2 Resistance to manual attack .9
5.4.3 Resistance to explosive pressure.9
5.4.4 Resistance to ballistic attack.9
5.5 RFI/EMI Shielding.10
5.6 Anti-graffiti.10
5.7 Decorative film.10
5.8 Low Emissivity.10
5.9 Ultra Violet Reducing Films .10
5.10 Privacy.10
6 Determination of the durability of adhesive backed polymeric filmed glass .10
6.1 General.10
6.2 Humidity Test.10
6.2.1 Principle.10
6.2.2 Size and number of test specimens.11
6.2.3 Preparation of filmed glass samples .11
6.2.4 Cleaning of filmed glass samples.11
6.2.5 Conditioning of test specimens .11
6.2.6 Test Procedure – Test without condensation.11
6.2.7 Visual Inspection.11
6.2.8 Determination of adhesion using peel test .11
6.2.9 Assessment of results .12
6.2.10 Acceptance criteria.12
6.2.11 Test report.13
7 Appearance.13
7.1 General.13
7.2 Detection of defects.13
7.2.1 General.13
7.2.2 Artificial sky.13
7.2.3 Daylight illumination.14
7.3 Conditions of examination.14
7.3.1 General.14
7.3.2 Glass substrate defects.14
7.3.3 Adhesive backed polymeric film defects .15
7.3.4 Installation defects.17
7.4 Acceptance criteria of adhesive backed polymeric filmed glass defects. .17
8 Product information.17
8.1 General.17
Annex A (informative) Guidelines for Installation of Adhesive Backed Polymeric Film .18
A.1 Wet lamination.18
A.2 General Points.18
A.3 Installation.18
A.3.1 Prepare for the installation.18
A.3.2 Clean the window .19
A.3.3 Fit the film to the glazing .19
A.3.4 Squeegee the film – first procedure .20
A.3.5 Trim the film .21
A.3.6 Finish the squeegee process .21
A.3.7 Housekeeping.21
A.3.8 Thicker safety films .21
A.4 Dry installation.22
Annex B Annex B (informative) Film to Glass Compatibility and Thermal Stress.23
Bibliography.25

Foreword
This document (prEN 15755-1:2008) has been prepared by Technical Committee CEN/TC 129 “Glass in
building”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
1 Scope
This European Standard defines the characteristics, properties and classification of adhesive backed
polymeric filmed glass, i.e. glass that has had an adhesive backed polymeric film applied, for use in buildings.
This standard does not apply to adhesive backed polymeric films manufactured from polyvinylchloride (PVC).
2 Normative References
EN 356 Glass in building – Security glazing – Testing and classification of resistance against manual
attack
EN 410 Glass in building – Determination of luminous and solar characteristics of glazing
EN 572-1 Glass in building – Basic soda lime silicate glass products – Part 1: Definitions and general
physical and mechanical properties
EN 572-2 Glass in building – Basic soda lime silicate glass products – Part 2: Float glass
EN 572-3 Glass in building – Basic soda lime silicate glass products – Part 3: Polished wired glass
EN 572-4 Glass in building – Basic soda lime silicate glass products – Part 4: Drawn sheet glass
EN 572-5 Glass in building – Basic soda lime silicate glass products – Part 5: Patterned glass
EN 572-6 Glass in building – Basic soda lime silicate glass products – Part 6: Wired patterned glass
EN 572-7 Glass in building – Basic soda lime silicate glass products – Part 7: Wired or unwired channel
shaped glass
EN 572-8 Glass in building – Basic soda lime silicate glass products – Part 8: Supplied and final cut sizes
EN 673 Glass in building – Determination of thermal transmittance (U value) – Calculation method
EN 1036 Glass in building – Silvered float glass
EN 1063 Glass in building – Security glazing – Testing and classification of resistance against bullet
attack
EN 1096-1 Glass in building – Coated glass – Part 1: Characteristics and properties
EN 1748-1-1 Glass in building – Special basic products – Borosilicate glasses – Part 1-1: Definitions and
general physical and mechanical properties
EN 1748-2-1 Glass in building – Special basic products – Glass ceramics – Part 2-1: Definitions and
general physical and mechanical properties
EN 1863-1 Glass in building – Heat strengthened soda lime silicate glass – Part 1: Definition and
description
EN 12150-1 Glass in building – Thermally toughened soda l
...