65 - AGRICULTURE
ICS 65 Details
AGRICULTURE
LANDWIRTSCHAFT
AGRICULTURE
KMETIJSTVO
General Information
Frequently Asked Questions
ICS 65 is a classification code in the International Classification for Standards (ICS) system. It covers "AGRICULTURE". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 4414 standards classified under ICS 65 (AGRICULTURE). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 65 - AGRICULTURE
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document defines the general considerations applicable to any type of remote monitoring and control system (RMCS) used in irrigation. The document also includes some specific clauses on RMCS that fully or partially incorporate controllers developed for irrigation. These controllers are specific hardware developments designed for specific irrigation monitoring and/or control requirements. An indication is given at the beginning of each section that clearly defines when it is specifically intended for controllers developed for irrigation.
- Standard18 pagesEnglish languagesale 15% off
IEC 62841-4-4:2020 This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation.
This document does not apply to
– hand-held machines having a mass of 18 kg or greater;
– self-propelled lawn trimmers or lawn edge trimmers;
– scissors type lawn trimmers and lawn edge trimmers;
– machines equipped with metallic cutting accessories consisting of more than one piece, e.g. pivoting chains or flail blades;
– edgers with rigid and/or metallic cutting devices.
Annex EE provides an informative summary of characteristics for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws.
Brush cutters and brush saws covered by this document are designed only to be operated with the machine to the right of the operator.
- Standard116 pagesEnglish languagee-Library read for1 day
- Amendment16 pagesEnglish languagee-Library read for1 day
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held die grinders and small rotary tools. IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to hand-held die grinders and to small rotary tools for mounted accessories not exceeding 55 mm in diameter and for mounted sanding accessories not exceeding 80 mm in diameter such as:
- threaded cones and plugs that are threaded on a mandrel with an unrelieved shoulder flange,
- mandrel mounted wheels, and
- rotary files
with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity.
This document does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory.
NOTE 101 Straight and vertical grinders are covered by IEC 62841-2-3.
- Standard28 pagesEnglish languagee-Library read for1 day
2022-01-05: This prAA includes common mods to EN IEC 62841-2-23 (PR=75431)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment9 pagesEnglish languagee-Library read for1 day
This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation.
- Amendment12 pagesEnglish languagee-Library read for1 day
This document specifies the open system interconnections (OSI) application layer, the transport, and the network layer, as well as the mapping to the controller area network (CAN) data link layer protocol as specified in ISO 11898-1. The application layer specifies messages, which are mapped to CAN CC data frames using the classic extended frame format (CEFF). For messages exceeding the length of the CEFF-formatted data frames, this document specifies transport layer and network layer protocols based on the SAE J1939-21 recommended practice.
- Standard55 pagesEnglish languagesale 15% off
- Standard57 pagesFrench languagesale 15% off
This document specifies how a transponder is activated and how the stored information is transferred to a transceiver.
- Standard15 pagesEnglish languagesale 15% off
1.1 Scope of EN 1993 4 1
(1) prEN 1993 4 1 provides rules for the structural design of steel silos of circular or rectangular plan-form, being free-standing (on ground) or supported on a structural framework (elevated).
(2) prEN 1993 4 1 is applicable to silos constructed from isotropic rolled plates that are stiffened or unstiffened, from corrugated sheeting that is stiffened or unstiffened and from flat or corrugated plates assembled into box structures of different geometries. It applies to vertical walls, hoppers, roof structures, transition junctions and support structures.
(3) prEN 1993 4 1 does not apply to storage vessels for silage and haylage, or to the storage of materials that are not free-flowing (see EN 1991 4). This Part 4-1 also does not cover:
- resistance to fire;
- cylindrical silos with internal subdivisions;
- internal structures within a single silo (except for internal ties, as defined in 12.5);
- silos with capacity less than 100 kN (10 tonnes);
- hoppers that are supported on a structural framework;
- cases where special measures are necessary to limit the consequences of accidents.
(4) This document is applicable to silos within the following dimensional limits (see EN 1991-4):
- Silo aspect ratio hb/dc < 10
- Silo total height hb < 70 m
- Silo equivalent diameter dc < 60 m
NOTE These dimensional limitations are more limited than those of EN 1991-4 which also applies to silos constructed from other materials.
(5) Where this standard applies to circular planform silos, the geometric form is restricted to axisymmetric structures, but unsymmetrical actions on them and supports that induce forces in the silo structure that are not axisymmetric are included.
(6) This part is concerned only with the requirements for resistance and stability of steel silos. For other requirements (such as operational safety, functional performance, fabrication and erection, quality control, details like man-holes, flanges, filling devices, outlet gates and feeders, etc.), see other relevant standards and information.
(7) This part is concerned with both isolated silo structures and silos that are connected to others to form a battery of silos, but throughout this document the term silo refers to a single cell within a battery.
(8) Provisions relating to special requirements of seismic design are provided in EN 1998 4, which complements or adapts the provisions of Eurocode 3 specifically for this purpose.
(9) The structural design of supporting structures for the silo are dealt with in EN 1993 1 1. The supporting structure is deemed to consist of all structural elements beneath the bottom flange of the lowest ring of the silo (see Figure 1.1), though information on some forms of support structure is given in Clause 8 of this document.
(10) Foundations in reinforced concrete for steel silos are dealt with in EN 1992 (all parts) and EN 1997 (all parts).
1.2 Assumptions
(1) Unless specifically stated, the provisions of EN 1990, EN 1991 (all parts) and EN 1993 1 (all parts) apply.
(2) The design methods given in EN 1993 4 1 are applicable if:
- the execution quality is as specified in EN 1090 2, and
- the construction materials and products used are as specified in the relevant parts of EN 1993 (all parts), or in the relevant material and product specifications.
Figure 1.1 - Terminology used in silo structures
...
- Draft153 pagesEnglish languagee-Library read for1 day
This document defines terms relating to liming materials.
An index of all terms defined in this part of the EN 12944 series is given in Annex A in English, French and German.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the dimensions and of the bulk density of pre-shaped growing media.
In this document, "pre-shaped growing media":
- includes solid, regular shaped, stable growing media sold, or which are ready for use, as a growing medium, where the dimensions and any corners are stable;
- excludes plugs;
NOTE For the determination of the dimensions and the bulk density of plugs, EN 18250:- applies [1].
- excludes solid growing media that has to be hydrated for it to form, varies in dimension with varying water content - for example, coir or peat slabs or growing bags.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies both a procedure for preliminary examination of a single sample as received for testing, and a procedure for preparing a test sample by blending and reduction of a series of samples representative of a consignment or a bulk delivery of fluid fertilizer.
NOTE This document complements the corresponding standard for solid fertilizers (ISO 14820-2).
- Draft9 pagesEnglish languagee-Library read for1 day
This document specifies both a procedure for preliminary examination of a single sample as received for testing, and a procedure for preparing a test sample by blending and reduction of a series of samples representative of a consignment or a bulk delivery of fluid fertilizer. NOTE This document complements the corresponding standard for solid fertilizers (ISO 14820-2).
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document specifies two methods for the determination of the bulk density (tapped) of solid fertilizers: the machine-tapping method (method 1); the hand-tapping method (method 2). These methods are applicable to dry fertilizers only. Neither method is suitable for materials which contain a large proportion of particles exceeding 5 mm in diameter. Method 2 is applicable only to spherical granules and to prills. It is not applicable to sharp-edged grains. NOTE Because of the differences in tapping technique, the two methods will not necessarily give the same value for the bulk density (tapped).
- Standard5 pagesEnglish languagesale 15% off
This document specifies a method for the determination of the bulk density (loose) of solid fertilizers, except powder fertilizers. The method is applicable to dry fertilizers only. The method is not suitable for materials which contain a large proportion of particles exceeding 5 mm in diameter.
- Standard4 pagesEnglish languagesale 15% off
This document describes and specifies the requirements of products of natural origin and products from industrial processes of basic and fine quality to be used as liming materials in agriculture for raising the pH of soil (and water).
- Standard25 pagesEnglish languagee-Library read for1 day
This document provides guidance to manage cork oak forests in a sustainable way. This document provides orientation for protecting cork oak forest while allowing appropriate use of the resources. It describes practices mainly focused on cork production while promoting cork oak forest regeneration, multiple benefits and mitigating global change. This document also points out practices to avoid or that are forbidden. The information given in this document can be also used for assessing future development of cork oak forests under different management scenarios as a guidance on how trade-offs between different forest functions should be dealt with.
- Technical specification26 pagesEnglish languagesale 15% off
This document specifies a method for the determination of the gas oil retention of solid, high nitrogen content, straight ammonium nitrate fertilizers. The method is applicable to fertilizers which do not contain materials soluble in gas oil and which are prilled or granular.
- Standard3 pagesEnglish languagesale 15% off
This document specifies a method for the determination of the dimensions and of the bulk density of pre-shaped growing media.
In this document, "pre-shaped growing media":
- includes solid, regular shaped, stable growing media sold, or which are ready for use, as a growing medium, where the dimensions and any corners are stable;
- excludes plugs;
NOTE For the determination of the dimensions and the bulk density of plugs, EN 18250:- applies [1].
- excludes solid growing media that has to be hydrated for it to form, varies in dimension with varying water content - for example, coir or peat slabs or growing bags.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of nutrient polymers nitrogen in presence of the other forms of nitrogen in inorganic fertilizers.
The method is applicable to all fertilizers which do not contain interfering organic compounds.
NOTE Nutrient polymers are methylen-urea (MU), in liquid and in solid form.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies the safety and cleaning requirements applicable to slaughtering traps intended for bovine animals and equines such as defined in Clause 3.
These requirements take into account hazards that may arise from the transport, mounting, adjustment, maintenance and use of these slaughtering traps.
NOTE This document takes into account the protection of animals at the time of killing.
This document is applicable to machinery or installations intended to facilitate the slaughter of bovine animals or equidae that weigh between 100 kg and 1 200 kg. They are either rotating slaughtering traps or fixed slaughtering traps.
This document does not apply to the following machinery and zones:
— “restrainers”: systems for holding and conveying via conveyor belts;
— slaughtering traps with a side door that opens under the weight of the animal alone;
— slaughtering traps where the only source of energy is manual effort.
This document does not cover the following essential requirements of Machinery Directive:
— safety and reliability of control systems;
— selection of control or operating modes;
— failure of the power supply;
— isolation of energy source.
The list of significant hazards is given in the informative Annex D.
Specific requirements relating to animal protection at the time of killing are also given in the normative Annex C.
- Standard36 pagesEnglish languagee-Library read for1 day
This document specifies the competencies required of assistance dogs’ professionals. The purpose of this document is to improve and ensure the quality of professionals working in a role within an assistance dog organization. Each speciality of assistance dog requires a specific set of role competencies and there are some common core competencies.
Core competencies in:
- breeding;
- puppy raising;
- dog care;
- assessors;
- orientation and mobility;
- trainers;
- instructors.
Specific competencies to train:
- guide dogs;
- hearing dogs;
- medical alert dogs;
- mobility assistance dogs;
- autism and development disorder dogs;
- team training instructor.
It is accepted that assistance dog organisations vary greatly in structure and not every organization will have all the roles identified. Where one person performs more than one role, it is expected that they will have the competencies of all the roles they perform e.g. a dog trainer may also have the competencies of a dog care specialist. And there will be some organisations where some of these roles are not required, e.g. those with no breeding programme will not require the associated role competencies.
- Standard35 pagesEnglish languagee-Library read for1 day
This document specifies tests for determining the strength and wear resistance of guards for power take-off (PTO) drive- shafts on tractors and machinery used in agriculture and forestry, and their acceptance criteria. It is intended to be used in combination with ISO 5673-1:2005.
It is applicable to the testing of PTO drive- shaft guards and their restraining means. It is not applicable to the testing of guards designed and constructed to be used as steps.
This document is not applicable to guards for power take-off drive shafts that are manufactured before the date of publication of this document.
- Standard34 pagesEnglish languagee-Library read for1 day
This document specifies the safety requirements and their verification for the design and construction of robotic feed systems (RFS) (see Annex A), which distribute feed and perform at least one of the following functions without the need of human interaction:
— storing of feed;
— loading of mobile feed unit (MFU);
— mixing;
— travelling;
— cleaning (residual feed);
— pushing feed.
Additionally, it provides the type of information, to be provided by the manufacturer, on safe working practices (including information about residual risks).
This document is for feeding livestock (e.g. cows, sheep, pigs).
This document does not apply to:
— systems designed to be used at a fixed location and that discharge feed at a remote location (e.g. chain conveyor feed systems, belt conveyor feed systems or liquid feed systems);
— tractors;
— systems designed for field application.
This document deals with all the significant hazards, hazardous situations and events relevant to RFS, see Annex B, when they are used as intended and under the conditions of misuse, which are reasonably foreseeable, by the manufacturer as listed in Clause 4, except for the hazards arising from:
— internal combustion engines of RFS;
— requirements for the connections to the main electric power supply;
— RFS with interchangeable equipment;
— emission of airborne noise.
NOTE 1 Hazards related to internal combustion engines of robotic feed systems (e.g. exhaust emissions in buildings) will be considered in separate standards
NOTE 2 The main electric power supply is subject to national regulations or codes
NOTE 3 Sudden loud noises may cause farm animals to become startled. It is advised to consider this with the design of the RFS.
Environmental aspects (except noise) have not been considered in this document.
This document is not applicable to feed systems manufactured before the date of its publication.
- Standard48 pagesEnglish languagee-Library read for1 day
This document establishes a process to measure wood being logged in native tropical forest management areas following an approved and documented plan. Such a process includes quantifying and monitoring the harvested area to support the chain of custody assessment, helping to ensure the origin of the logged wood. Wood volume measurement is outside the scope of this document. This document proposes indicators that can be used to reinforce the level of confidence with regards to the correct origin of the logged wood, particularly when assessing the transport and commercial documentation of wood-based products, by means of a consistency check with what can be observed as occurring in the forest area declared as the origin of native tropical timber. The indicators will serve as an alert of any eventual inconsistency detected. These indicators are obtained by means of standardized metrics. These metrics are mathematical models that establish a correlation between the area of subtracted vegetation – detected through remote sensing monitoring tools – and the number of extracted trees that generate the amount of declared logged wood. This document is intended to be used to quantify the impact resulting from native vegetation extraction by selective logging in various tropical forest regions of the world, in order to support the long-term maintenance of these forest assets. The scope of this document is limited to native tropical forests, i.e. forests naturally originated and formed by native species (or group) in tropical regions. This document does not apply to planted forests, regardless of the species (or group) being native or exotic, as those forests are subject to varied and particular management practices which depend on the geographical conditions and rules of the country in which they are located. Regarding the limitations of this document, it is not intended to ensure: exact origin (geographical coordinates) of each log; exact volumes of wood extracted from the forest; species (or group) of wood harvested; chain of custody compliance; social and labour compliance of the audited operation; tax compliance of the audited operation. This document does not focus on, and is not oriented towards, biomass and carbon-balance estimations. This document does not cover any aspects of sustainable forest management and focuses on measurement procedures described above. In addition, it is not intended to be a Management Systems Standard (MSS). Furthermore, the national legal requirements and international policies are not repeated in this document, including those related to sustainability aspects, as well as those related to traditional and indigenous communities contained in the principles/articles of the UN Declaration on the rights of Indigenous Peoples (UNDRIP).
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This document, when used together with ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021, specifies the safety requirements and their verification for the design and construction of trailed and self-propelled harvesters for grapes, olives and coffee. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When provisions of this document are different from those which are stated in ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021, the provisions of this document take precedence over the provisions of ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021 for machines that have been designed and built according to the provisions of this document.
This document, taken together with ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021, deals with all the significant hazards, hazardous situations and events relevant to trailed and self-propelled harvesters for grapes, olives and coffee, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer. It is not applicable to hazards arising from the presence of persons other than the operator, hazards related to lack of visibility, except lighting, hazards related to vibrations and moving parts for power transmission, except for strength requirements for guards and barriers.
This document does not deal with environmental hazards, except noise.
In respect of steering of self-propelled machines, it is applicable only to the ergonomic aspects (for example, location of the steering wheel); no other aspects related to steering are covered.
NOTE Specific requirements related to road traffic regulations are not taken into account in this document.
This document is not applicable to machines manufactured before the date of its publication.
- Standard28 pagesEnglish languagee-Library read for1 day
This document specifies the competencies required of assistance dogs’ professionals. The purpose of this document is to improve and ensure the quality of professionals working in a role within an assistance dog organization. Each speciality of assistance dog requires a specific set of role competencies and there are some common core competencies.
Core competencies in:
- breeding;
- puppy raising;
- dog care;
- assessors;
- orientation and mobility;
- trainers;
- instructors.
Specific competencies to train:
- guide dogs;
- hearing dogs;
- medical alert dogs;
- mobility assistance dogs;
- autism and development disorder dogs;
- team training instructor.
It is accepted that assistance dog organisations vary greatly in structure and not every organization will have all the roles identified. Where one person performs more than one role, it is expected that they will have the competencies of all the roles they perform e.g. a dog trainer may also have the competencies of a dog care specialist. And there will be some organisations where some of these roles are not required, e.g. those with no breeding programme will not require the associated role competencies.
- Standard35 pagesEnglish languagee-Library read for1 day
This document provides guidelines for the implementation of pressurized sprinkler, micro-sprinkler and sprayer irrigation systems [hereinafter: system(s)]. It is applicable to both small-scale family agriculture and large-scale commercial agriculture, in open field or within protected crops structure (e.g., greenhouse, net-house or tunnel). This document is intended for the use of agriculture ministries, agronomists, irrigation planners, farmers and end-users. This document is not applicable to centre pivots, linear systems, travellers, and side roll sprinkler irrigation systems.
- Standard20 pagesEnglish languagesale 15% off
This document specifies tests for determining the strength and wear resistance of guards for power take-off (PTO) drive- shafts on tractors and machinery used in agriculture and forestry, and their acceptance criteria. It is intended to be used in combination with ISO 5673-1:2005.
It is applicable to the testing of PTO drive- shaft guards and their restraining means. It is not applicable to the testing of guards designed and constructed to be used as steps.
This document is not applicable to guards for power take-off drive shafts that are manufactured before the date of publication of this document.
- Standard34 pagesEnglish languagee-Library read for1 day
This document specifies the safety requirements and their verification for the design and construction of robotic feed systems (RFS) (see Annex A), which distribute feed and perform at least one of the following functions without the need of human interaction:
— storing of feed;
— loading of mobile feed unit (MFU);
— mixing;
— travelling;
— cleaning (residual feed);
— pushing feed.
Additionally, it provides the type of information, to be provided by the manufacturer, on safe working practices (including information about residual risks).
This document is for feeding livestock (e.g. cows, sheep, pigs).
This document does not apply to:
— systems designed to be used at a fixed location and that discharge feed at a remote location (e.g. chain conveyor feed systems, belt conveyor feed systems or liquid feed systems);
— tractors;
— systems designed for field application.
This document deals with all the significant hazards, hazardous situations and events relevant to RFS, see Annex B, when they are used as intended and under the conditions of misuse, which are reasonably foreseeable, by the manufacturer as listed in Clause 4, except for the hazards arising from:
— internal combustion engines of RFS;
— requirements for the connections to the main electric power supply;
— RFS with interchangeable equipment;
— emission of airborne noise.
NOTE 1 Hazards related to internal combustion engines of robotic feed systems (e.g. exhaust emissions in buildings) will be considered in separate standards
NOTE 2 The main electric power supply is subject to national regulations or codes
NOTE 3 Sudden loud noises may cause farm animals to become startled. It is advised to consider this with the design of the RFS.
Environmental aspects (except noise) have not been considered in this document.
This document is not applicable to feed systems manufactured before the date of its publication.
- Standard48 pagesEnglish languagee-Library read for1 day
This document, when used together with ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021, specifies the safety requirements and their verification for the design and construction of trailed and self-propelled harvesters for grapes, olives and coffee. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When provisions of this document are different from those which are stated in ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021, the provisions of this document take precedence over the provisions of ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021 for machines that have been designed and built according to the provisions of this document.
This document, taken together with ISO 4254-1:2013 and ISO 4254-1:2013/AMD1:2021, deals with all the significant hazards, hazardous situations and events relevant to trailed and self-propelled harvesters for grapes, olives and coffee, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer. It is not applicable to hazards arising from the presence of persons other than the operator, hazards related to lack of visibility, except lighting, hazards related to vibrations and moving parts for power transmission, except for strength requirements for guards and barriers.
This document does not deal with environmental hazards, except noise.
In respect of steering of self-propelled machines, it is applicable only to the ergonomic aspects (for example, location of the steering wheel); no other aspects related to steering are covered.
NOTE Specific requirements related to road traffic regulations are not taken into account in this document.
This document is not applicable to machines manufactured before the date of its publication.
- Standard28 pagesEnglish languagee-Library read for1 day
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
Addition: This document applies to hand-held fastener driving tools
- intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and
- whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive.
This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank.
This document does not apply to tools powered by combustible gases, even if electrically ignited.
NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.
- Standard39 pagesEnglish languagee-Library read for1 day
This document specifies a test procedure for determining the performance of the internal cleaning system fitted onto a sprayer. This document is applicable to mounted, trailed and self-propelled agricultural sprayers used for crop protection and liquid fertilizer applications. It is not applicable to sprayers with direct injection systems, manually operated knapsack sprayers, aircraft sprayers and uncrewed aerial spraying system (UASS).
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies to the producers of e-liquid the information that should be provided on the outside packaging, unit packets, product information leaflet, or online content that is supplied with a vaping product. The scope of this document is limited to vaping products, cartridges, prefilled containers, and accessories.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies the operating procedures for chicken slaughtering.
- Standard6 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
- Standard5 pagesFrench languagesale 15% off
This document specifies the safety and hygiene requirements applicable to slaughtering traps intended for bovine animals and equidae such as defined in Clause 3.
These requirements take into account hazards that may arise from the transport, mounting, adjustment, maintenance and use of these slaughtering traps.
NOTE This document takes into account the protection of animals at the time of killing.
The machinery or installations covered by this document are intended to facilitate the slaughter of bovine animals or equidae that weigh between 100 kg and 1 200 kg. They are either rotating slaughtering traps or fixed slaughtering traps.
This document does not cover the following machinery and zones:
- "restrainers": systems for holding and conveying via conveyor belts;
- slaughtering traps with a side door that opens under the weight of the animal alone;
- slaughtering traps where the only source of energy is manual effort.
This document does not cover the following essential requirements of Machinery Directive:
- safety and reliability of control systems;
- control devices;
- failure of the power supply;
- isolation of energy source.
The list of significant hazards is given in the informative Annex C.
- Standard36 pagesEnglish languagee-Library read for1 day
This document specifies to the producers of e-liquid the information that should be provided on the outside packaging, unit packets, product information leaflet, or online content that is supplied with a vaping product. The scope of this document is limited to vaping products, cartridges, prefilled containers, and accessories.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies the management and control of cashmere goat farming and herding in the supply chain. This includes proper use of rangelands and pastures, housing and/or nomadic production system, reproduction, feeding, breeding and health, cashmere harvesting, labelling and traceability of fibre and herds.
- Standard26 pagesEnglish languagesale 15% off
- Standard28 pagesFrench languagesale 15% off
This document specifies safety requirements, and measures for their verification, for the design and construction of portable pole-mounted powered pruners with internal combustion engine power sources (hereafter named “machine”), including extendable and telescopic machines. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter.
This document deals with significant hazards relevant to these machines when they are used as intended. This document does not address electrical shock from contact with overhead electric lines apart from warnings and instruction manual requirements, or whole-body vibration from back power units.
NOTE 1 See Annex A for a list of significant hazards.
This document is applicable to machines manufactured after its date of publication.
Brush cutters with a circular saw blade are not included in the scope of this document.
NOTE 2 Brush cutter requirements are outlined in ISO 11806-1 and ISO 11806-2.
- Standard42 pagesEnglish languagee-Library read for1 day
This document, when used together with ISO 16122-1:2024, specifies the requirements and test methods for the inspection of fixed and semi-mobile sprayers, when in use.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application.
NOTE Requirements for the protection of inspectors during an inspection are given in ISO 16122-1:2024.
- Standard31 pagesEnglish languagee-Library read for1 day
This document, when used together with ISO 16122-1:2024, specifies the requirements and test methods for the inspection of horizontal boom sprayers, when in use.
The requirements relate to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application.
NOTE Requirements for the protection of inspectors during an inspection are given in ISO 16122-1:2024.
- Standard30 pagesEnglish languagee-Library read for1 day
This document, when used together with ISO 16122-1:2024, specifies the requirements and test methods for the inspection of sprayers for bush and tree crops, when in use.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application.
NOTE Requirements for the protection of inspectors during an inspection are given in ISO 16122-1:2024.
- Standard27 pagesEnglish languagee-Library read for1 day
This document defines the general requirements to be fulfilled for the inspection of all types of sprayers for plant protection products used in agriculture, horticulture, forestry and other areas, except knapsack sprayers.
NOTE For knapsack sprayers, see ISO/FDIS 19932–3:—.
The specific requirements for the different types of sprayers are defined in the relevant specific parts of the ISO 16122 series. When used in conjunction with the relevant sprayer specific part (see Annex A), this document specifies the requirements and test methods for the inspection of sprayers in use.
The requirements relate mainly to the condition of the sprayer with respect to potential risks for the environment and its performance to achieve a good application.
This document also includes minimum requirements for the preparation of the sprayer for the inspection and the minimum safety requirements with respect to the safety of the inspector (test operator) during the inspection.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies the dimensions, characteristics, and positioning of Speed Identification Signs (SIS). These signs indicate the maximum equipment ground speed, based on the ground speed design capability, for agricultural field equipment. This document is applicable to agricultural field equipment moving on public roads.
- Standard6 pagesEnglish languagesale 15% off
This document specifies dimensional requirements for the attachment of agricultural, non-balanced trailers and implements by means of hitch rings to the rear of towing vehicles equipped with a hook specified in ISO 6489-1. It ensures the interchangeability of the mechanical connections on agricultural towed vehicles. This document is applicable to rings whose coupling point is below the centre-line of the rear axle and the power take-off (PTO) of the tractor.
- Standard4 pagesEnglish languagesale 15% off
This document specifies the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films for mulching applications in agriculture and horticulture.
These mulch films are intended to be removed after use and not incorporated in the soil.
These mulch films are not intended to be used for soil disinfection by fumigation. Films for soil disinfection are in the scope of EN 17098-1 [1] and EN 17098-2 [2].
The biodegradable mulch films intended to be incorporated in the soil after used are also not in the scope of this document. They are in the scope of EN 17033 [3].
This document specifies a classification for durability of mulching films and the test methods referred to in this document.
This document is applicable to thermoplastic mulch films, used for agriculture and horticulture in Europe, based on polyethylene and/or ethylene copolymers, of the following types:
- transparent films;
- black films;
- reflective films (e.g. white films, black/white films and black/silver films);
- films of other colour(s) for weed control (e.g. green, brown).
This document defines the criteria for design for recycling of mulch films and refer to EN 18109 for the product lifecycle, including installation, use, removal and collection for end of life for management of the product after its usage.
NOTE Mulch films can be highly soiled by organic and mineral residues at the end of their use life: the observed rates (or levels) of soilage of mulch films can vary from 70 % to 90 %, therefore the film thickness is a key factor on the rate of soilage, the thinnest films (e.g. less than 20 micron) will be the mostly soiled, difficult, expensive to remove, recover and recycle.
- Standard34 pagesEnglish languagee-Library read for1 day
This document, when used together with ISO 16122-1:2024, specifies the requirements and test methods for the inspection of sprayers for bush and tree crops, when in use.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application.
NOTE Requirements for the protection of inspectors during an inspection are given in ISO 16122-1:2024.
- Standard27 pagesEnglish languagee-Library read for1 day
This document specifies the integrated management of agricultural plastic products with agronomic performance.
This document gives guidance and requirements for their installation, use, removal, sorting, collection and preparation for recycling as well as general guidelines for design for recycling.
NOTE 1 EN 13206:2025, EN 13207:2025, EN 13655:2025, EN 14932:2025 and EN 17098-1:2025 include a specific clause dedicated to design for recycling.
NOTE 2 Design for recycling for products not covered by a standard is detailed in this document.
This document first aims professional users and can be used also for domestic purposes.
This document is applicable to:
- covering films that comply with EN 13206:2025 or with specifications laid out by the film manufacturer/supplier, used for covering greenhouses, small tunnels or livestock buildings, as well as to direct crop covers used for semi-forcing plants and seed;
- silage films for horizontal silos that comply with EN 13207:2025 or with specifications laid out by the film manufacturer/supplier;
- sheaths for horizontal silos (forage crop and grain storage) that comply with EN 13207:2025 or with specifications laid out by the sheath manufacturer/supplier;
- stretch films for wrapping bales that comply with EN 14932:2025 or with specifications laid out by the film manufacturer/supplier;
- thermoplastic mulching films that comply with EN 13655:2025 or with specifications laid out by the film manufacturer/supplier;
- barrier films for agricultural and horticultural soil disinfection by fumigation that comply with EN 17098-1:2025;
- nets and twines for catling and horticulture that comply with the specifications laid out by EN ISO 4167 or by the manufacturer/supplier;
- flexible ducts, semi-rigid and rigid pipes and fittings for irrigation that comply with ISO 8779, EN ISO 9261, ISO 13460-1, ISO 16438, EN 14267, EN 12324-2, EN 13635, EN 13997, EN 17176-2:2019+A1:2022 or with specifications laid out by the manufacturer/supplier;
- fabrics and non-woven nets and sheets for catling and horticulture that comply with ISO 9073 series or with specifications laid out by the manufacturer/supplier.
This document does not cover construction, packaging and food-contact products.
NOTE 3 For products non-suitable for recycling in the context of this document, specific procedures apply.
- Standard67 pagesEnglish languagee-Library read for1 day
This document defines the general requirements to be fulfilled for the inspection of all types of sprayers for plant protection products used in agriculture, horticulture, forestry and other areas, except knapsack sprayers.
NOTE For knapsack sprayers, see ISO/FDIS 19932–3:—.
The specific requirements for the different types of sprayers are defined in the relevant specific parts of the ISO 16122 series. When used in conjunction with the relevant sprayer specific part (see Annex A), this document specifies the requirements and test methods for the inspection of sprayers in use.
The requirements relate mainly to the condition of the sprayer with respect to potential risks for the environment and its performance to achieve a good application.
This document also includes minimum requirements for the preparation of the sprayer for the inspection and the minimum safety requirements with respect to the safety of the inspector (test operator) during the inspection.
- Standard19 pagesEnglish languagee-Library read for1 day