25.140.20 - Electric tools
ICS 25.140.20 Details
Electric tools
Elektrowerkzeuge
Outils electriques
Električna orodja
General Information
Frequently Asked Questions
ICS 25.140.20 is a classification code in the International Classification for Standards (ICS) system. It covers "Electric tools". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 867 standards classified under ICS 25.140.20 (Electric tools). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 25.140.20 - Electric tools
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- Amendment9 pagesEnglish languagee-Library read for1 day
IEC 62841-3-16:2025 applies to transportable belt sanders, disc sanders and belt/disc sanders which are equipped with – a sanding belt; or – a sanding disc; or – a sanding belt and a sanding disc for sanding solid materials. This document does not apply to hand-held disc-type sanders. NOTE 101 Hand-held disc-type sanders are covered by IEC 62841-2-3. This document does not apply to hand-held belt sanders. NOTE 102 Hand-held belt sanders are covered by IEC 62841-2-4. This Part 3-16 is to be used in conjunction with the first edition of IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025. This Part 3-16 supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders. Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-16, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
- Draft19 pagesEnglish languagee-Library read for1 day
- Amendment9 pagesEnglish languagee-Library read for1 day
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held die grinders and small rotary tools. IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to hand-held die grinders and to small rotary tools for mounted accessories not exceeding 55 mm in diameter and for mounted sanding accessories not exceeding 80 mm in diameter such as:
- threaded cones and plugs that are threaded on a mandrel with an unrelieved shoulder flange,
- mandrel mounted wheels, and
- rotary files
with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity.
This document does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory.
NOTE 101 Straight and vertical grinders are covered by IEC 62841-2-3.
- Standard28 pagesEnglish languagee-Library read for1 day
IEC 62841-4-4:2020 This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation.
This document does not apply to
– hand-held machines having a mass of 18 kg or greater;
– self-propelled lawn trimmers or lawn edge trimmers;
– scissors type lawn trimmers and lawn edge trimmers;
– machines equipped with metallic cutting accessories consisting of more than one piece, e.g. pivoting chains or flail blades;
– edgers with rigid and/or metallic cutting devices.
Annex EE provides an informative summary of characteristics for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws.
Brush cutters and brush saws covered by this document are designed only to be operated with the machine to the right of the operator.
- Standard116 pagesEnglish languagee-Library read for1 day
- Amendment16 pagesEnglish languagee-Library read for1 day
2022-01-05: This prAA includes common mods to EN IEC 62841-2-23 (PR=75431)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment9 pagesEnglish languagee-Library read for1 day
This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation.
- Amendment12 pagesEnglish languagee-Library read for1 day
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held strapping tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. This document applies to hand-held strapping tools.
- Standard18 pagesEnglish languagee-Library read for1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-18 (PR=75429)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment8 pagesEnglish languagee-Library read for1 day
IEC 62841-2-23:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held die grinders and small rotary tools. IEC 62841-1:2014, Clause 1 is applicable, except as follows: This document applies to hand-held die grinders and to small rotary tools for mounted accessories not exceeding 55 mm in diameter and for mounted sanding accessories not exceeding 80 mm in diameter such as: - threaded cones and plugs that are threaded on a mandrel with an unrelieved shoulder flange, - mandrel mounted wheels, and - rotary files with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity. This document does not apply to straight and vertical grinders utilizing flanges for driving an abrasive accessory. NOTE 101 Straight and vertical grinders are covered by IEC 62841-2-3.
- Standard28 pagesEnglish languagee-Library read for1 day
2022-01-05: This prAA includes common mods to EN IEC 62841-2-23 (PR=75431)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment9 pagesEnglish languagee-Library read for1 day
- Amendment16 pagesEnglish languagee-Library read for1 day
This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation.
- Amendment12 pagesEnglish languagee-Library read for1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-18 (PR=75429)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment8 pagesEnglish languagee-Library read for1 day
IEC 62841-2-18:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held strapping tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. This document applies to hand-held strapping tools.
- Standard18 pagesEnglish languagee-Library read for1 day
IEC 62841-2-16:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
Addition: This document applies to hand-held fastener driving tools
- intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and
- whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive.
This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank.
This document does not apply to tools powered by combustible gases, even if electrically ignited.
NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.
- Standard249 pagesEnglish languagesale 15% off
- Standard74 pagesEnglish languagesale 15% off
- Standard73 pagesEnglish and French languagesale 15% off
IEC 62841-2-16: 2026 Amendment 1
- Standard7 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
- Standard15 pagesEnglish and French languagesale 15% off
IEC 62841-4-9:2026 applies to rechargeable battery-powered motor-operated chain saws for tree service, hereinafter referred to as chain saws or machines, having a maximum mass of 5,0 kg. The mass includes the heaviest detachable battery pack(s), if any, as described in IEC 62841-1:2014, K.8.14.2 e) 2), but excludes the guide bar, saw chain and saw chain lubricant. Chain saws covered by this document are intended to be used for pruning and dismantling standing tree crowns.
The chain saws covered by this document are designed only to be operated with the right hand on the rear handle and the left hand on the front handle.
This document does not apply to
– chain saws supplied by mains power or power from non-isolated sources that permit the machine to be used while connected to such power supplies; or
– chain saws supplied by integral batteries; or
– chain saws for cutting wood as covered by IEC 62841-4-1; or
– chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way such as with a support or as a stationary or transportable machine; or
– pole-mounted pruners; or
NOTE 1 Pole-mounted pruners are covered by IEC 62841-4-10.
– pruning saws.
NOTE 2 Pruning saws will be covered by a future part of IEC 62841-4.
The maximum rated voltage for machines and battery packs is 75 V d.c.
Battery machines covered by this document are not considered to be class I tools, class II tools or class III tools and therefore are not required to have basic insulation, supplementary insulation or reinforced insulation. Electric shock hazard is considered to exist only between parts of opposite polarity.
This document deals with the hazards presented by machines which are encountered by all persons in the normal use and reasonably foreseeable misuse of the machines.
When evaluating a rechargeable battery pack for protection against electric shock during charging, creepage distances, clearances and distances through insulation, the relevant requirements of this document are applicable with the battery pack fitted to the intended charger.
Since rechargeable battery packs for machines are submitted to different use patterns (such as rough use, high charging and discharging currents), their safety can be evaluated only by this document and not by using other standards for rechargeable battery packs, such as IEC 62133-1:2017 or IEC 62133-2:2017, unless otherwise indicated in this document. All relevant aspects related to the safety of rechargeable batteries are addressed in this document, such that the requirements of IEC 62133-1:2017 or IEC 62133-2:2017 are not required to be separately applied.
When evaluating the risk of fire associated with rechargeable battery packs for machines, consideration has been given to the fact that these battery packs are unattended energy sources and have been evaluated as such in this document. Requirements in other standards regarding the risk of fire due to the charging of these battery packs are therefore considered to be fulfilled.
This document also addresses requirements covering the use of lithium-ion cells employed in battery systems in machines. The following is considered within the context of these requirements:
– These requirements address the risk of fire or explosion of these batteries and not any possible hazards associated with toxicity nor potential hazards associated with transportation or disposal.
NOTE 3 IEC 62281:2019 covers the safety aspects of lithium-ion batteries during transport.
– Battery systems covered by these requirements are not intended to be serviced by the end user.
– These requirements are intended to provide comprehensive evaluation of a battery only if used in products covered by this document.
– These requirements address the safety of lithium-ion battery systems during storage and use including discharge and charge. These requirements are only considered to be supplementary requirements in regard to battery charger fire and e
- Standard71 pagesEnglish languagesale 15% off
- Standard77 pagesFrench languagesale 15% off
- Standard148 pagesEnglish and French languagesale 15% off
IEC 62841-2-24:2026 applies to oscillating multifunction tools.
This document is to be used in conjunction with IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025.
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held oscillating multifunction tools.
Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
- Standard19 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held jointers. IEC 62841-1:2014, Clause 1 is applicable, except as follows: This document applies to hand-held jointers for cutting into wood or materials with similar physical characteristics such as, for example, chipboard, fibreboard and plywood.
- Standard20 pagesEnglish languagee-Library read for1 day
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held band saws. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
This document applies to hand-held band saws.
- Standard18 pagesEnglish languagee-Library read for1 day
IEC 62841-2-22:2025 applies to hand-held cut-off machines fitted with
- one bonded reinforced wheel of Type 41 or Type 42; or
- one or more diamond cutting wheels with peripheral gaps, if any,
• having no positive rake angle; and
• not exceeding 10 mm for cut-off machines other than flush cutters, power cutters and wall chasers; and with
- a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s at rated capacity; and
- a rated capacity not exceeding 430 mm.
NOTE 101 An example of a permitted diamond cutting wheel construction is shown in Figure 106.
These tools are intended to cut materials such as metals, concrete, masonry, glass and tile.
This document does not apply to:
- cut-off machines that can be converted to a grinder, sander or polisher, which are covered by IEC 62841-2-3;
- circular saws which are covered by IEC 62841-2-5; and
- die grinders and small rotary tools which are covered by IEC 62841-2-23;
- tools intended to cut wood, except for utility cutters;
- cut-off machines fitted with a bonded reinforced wheel of Type 42 with a diameter exceeding 230 mm.
This document is to be used in conjunction with IEC 62841-1:2014.
- Standard62 pagesEnglish languagee-Library read for1 day
- Amendment12 pagesEnglish languagee-Library read for1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-19 (PR=75430)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment9 pagesEnglish languagee-Library read for1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-20 (PR=75425)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment8 pagesEnglish languagee-Library read for1 day
IEC 62841-2-22:2025 applies to hand-held cut-off machines fitted with - one bonded reinforced wheel of Type 41 or Type 42; or - one or more diamond cutting wheels with peripheral gaps, if any, • having no positive rake angle; and • not exceeding 10 mm for cut-off machines other than flush cutters, power cutters and wall chasers; and with - a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s at rated capacity; and - a rated capacity not exceeding 430 mm. NOTE 101 An example of a permitted diamond cutting wheel construction is shown in Figure 106. These tools are intended to cut materials such as metals, concrete, masonry, glass and tile. This document does not apply to: - cut-off machines that can be converted to a grinder, sander or polisher, which are covered by IEC 62841-2-3; - circular saws which are covered by IEC 62841-2-5; and - die grinders and small rotary tools which are covered by IEC 62841-2-23; - tools intended to cut wood, except for utility cutters; - cut-off machines fitted with a bonded reinforced wheel of Type 42 with a diameter exceeding 230 mm. This document is to be used in conjunction with IEC 62841-1:2014.
- Standard62 pagesEnglish languagee-Library read for1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-20 (PR=75425)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment8 pagesEnglish languagee-Library read for1 day
IEC 62841-2-19:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held jointers. IEC 62841-1:2014, Clause 1 is applicable, except as follows: This document applies to hand-held jointers for cutting into wood or materials with similar physical characteristics such as, for example, chipboard, fibreboard and plywood.
- Standard20 pagesEnglish languagee-Library read for1 day
- Amendment12 pagesEnglish languagee-Library read for1 day
IEC 62841-2-20:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held band saws. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. IEC 62841-1:2014, Clause 1 is applicable, except as follows: This document applies to hand-held band saws.
- Standard18 pagesEnglish languagee-Library read for1 day
2021-12-20: This prAA includes common mods to EN IEC 62841-2-19 (PR=75430)
DOW=DOR+48 months is applied to all parts in EN IEC 62841 series
- Amendment9 pagesEnglish languagee-Library read for1 day
- Corrigendum1 pageEnglish languagee-Library read for1 day
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly.
IEC 62841-1:2014, Clause 1 is applicable, except as follows:
Addition: This document applies to hand-held fastener driving tools
- intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and
- whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive.
This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank.
This document does not apply to tools powered by combustible gases, even if electrically ignited.
NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.
- Standard39 pagesEnglish languagee-Library read for1 day
- Corrigendum1 pageEnglish languagee-Library read for1 day
- Standard2 pagesEnglish and French languagesale 15% off
IEC 62841-2-16:2024 is to be used in conjunction with IEC 62841-1:2014. This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for hand-held fastener driving tools. Where a particular subclause of IEC 62841-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1 is to be adapted accordingly. IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to hand-held fastener driving tools - intended for driving fasteners into or through concrete, fabric, fiberboard, metal, plastic, wood, wood products, cartons, and other materials; and - whose energy to drive the fastener is derived directly or indirectly from an electric motor or magnetic drive. This document does not apply to pneumatically driven tools where the compressed gas comes from an external source, such as a compressor or a tank. This document does not apply to tools powered by combustible gases, even if electrically ignited. NOTE 101 Tools powered by compressed air or combustible gases are covered by ISO 11148-13:2017.
- Standard39 pagesEnglish languagee-Library read for1 day
IEC 62841-3-1:2014 applies to transportable table saws with:
- a toothed single blade; or
- stacked blades that cut a single groove or slot; or
- a moulding head cutter intended for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter between 105 mm and 315 mm, which hereinafter may simply be referred to as saw or tool. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. This standard does not apply to table saws intended to cut other metals, such as magnesium, steel and iron. This standard does not apply to table saws with an automatic feeding device. This standard does not apply to saws designed for use with abrasive wheels. This standard does not apply to table saws with more than one spindle such as for a scoring blade. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Table Saw, Transportable
This publication is to be read in conjunction with IEC 62841-1:2014. The contents of the corrigendum of November 2015 have been included in this copy.
- Standard103 pagesEnglish languagesale 15% off
- Standard99 pagesEnglish and French languagesale 15% off
- Standard208 pagesEnglish and French languagesale 15% off
IEC 62841-3-1: 2025 Amendment 2
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 62841-3-16:2025 applies to transportable belt sanders, disc sanders and belt/disc sanders which are equipped with
– a sanding belt; or
– a sanding disc; or
– a sanding belt and a sanding disc
for sanding solid materials.
This document does not apply to hand-held disc-type sanders.
NOTE 101 Hand-held disc-type sanders are covered by IEC 62841-2-3.
This document does not apply to hand-held belt sanders.
NOTE 102 Hand-held belt sanders are covered by IEC 62841-2-4.
This Part 3-16 is to be used in conjunction with the first edition of IEC 62841-1:2014 and IEC 62841-1:2014/AMD1:2025.
This Part 3-16 supplements or modifies the corresponding clauses in IEC 62841-1:2014, so as to convert it into the IEC Standard: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders.
Where a particular subclause of IEC 62841-1:2014 is not mentioned in this Part 3-16, that subclause applies as far as relevant. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 62841-1:2014 is to be adapted accordingly.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
- Standard19 pagesEnglish languagesale 15% off
- Standard221 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off
IEC 63241-3-3:2025 applies to transportable planers and thicknessers intended to plane wood.
This document is to be used in conjunction with the first edition of IEC 63241-1:2023.
This document supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Particular requirements for transportable planers and thicknessers.
Where a particular subclause of IEC 63241-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 63241-1 is to be adapted accordingly.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
- Standard6 pagesEnglish languagesale 15% off
IEC 63241-3-9: 2025 applies to transportable mitre saws intended to cut wood or wood-based materials.
This document is to be used in conjunction with the first edition of IEC 63241-1:2023.
This document supplements or modifies the corresponding clauses in IEC 63241-1, so as to convert it into the IEC Standard: Particular requirements for transportable mitre saws.
Where a particular subclause of IEC 63241-1 is not mentioned in this document, that subclause applies as far as reasonable. Where this document states "addition", "modification" or "replacement", the relevant text in IEC 63241-1 is to be adapted accordingly.
The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.
The terms defined in Clause 3 are printed in bold typeface.
Subclauses, notes, tables and figures which are additional to those in IEC 63241-1 are numbered starting from 101.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations can need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication.
- Standard6 pagesEnglish languagesale 15% off
IEC 62841-2-22:2025 applies to hand-held cut-off machines fitted with
- one bonded reinforced wheel of Type 41 or Type 42; or
- one or more diamond cutting wheels with peripheral gaps, if any,
• having no positive rake angle; and
• not exceeding 10 mm for cut-off machines other than flush cutters, power cutters and wall chasers; and with
- a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s at rated capacity; and
- a rated capacity not exceeding 430 mm.
NOTE 101 An example of a permitted diamond cutting wheel construction is shown in Figure 106.
These tools are intended to cut materials such as metals, concrete, masonry, glass and tile.
This document does not apply to:
- cut-off machines that can be converted to a grinder, sander or polisher, which are covered by IEC 62841-2-3;
- circular saws which are covered by IEC 62841-2-5; and
- die grinders and small rotary tools which are covered by IEC 62841-2-23;
- tools intended to cut wood, except for utility cutters;
- cut-off machines fitted with a bonded reinforced wheel of Type 42 with a diameter exceeding 230 mm.
This document is to be used in conjunction with IEC 62841-1:2014.
- Standard332 pagesEnglish languagesale 15% off
- Standard122 pagesEnglish and French languagesale 15% off
- Amendment25 pagesEnglish languagee-Library read for1 day
- Amendment25 pagesEnglish languagee-Library read for1 day
- Amendment25 pagesEnglish languagee-Library read for1 day
- Amendment25 pagesEnglish languagee-Library read for1 day
IEC 62841-4-8:2025 specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with an integral electric motor, with or without vacuum assisted collection, which are designed to reduce organic material to smaller pieces and are used in a stationary position by an operator standing on the ground. This document applies to shredders/chippers with feed intake openings or feed safety openings that in total will fit into a square of 250 mm x 250 mm.
NOTE 101 The requirements for the measurement of the square of 250 mm x 250 mm are specified in 19.101.1.
In this document, shredders/chippers are referred to collectively as machine(s).
This document does not cover requirements for
- machines powered by combustion engines; or
- machines driven by an external power source; or
- machines with powered discharge intended to broadcast material or load vehicles; or
- machines with mechanically powered feed intake or attachments; or
- wood chippers for forestry, agriculture, horticulture and landscaping.
This document is to be used in conjunction with IEC 62841‑1:2014.
This document supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC Standard: Particular requirements for shredders/chippers.
- Standard98 pagesEnglish languagee-Library read for1 day