29.240.99 - Other equipment related to power transmission and distribution networks
ICS 29.240.99 Details
Other equipment related to power transmission and distribution networks
Weitere Aspekte von Starkstromanlagen
Autres equipements relatifs aux reseaux de transport et de distribution de courant
Druga oprema v zvezi z omrežji za prenos in distribucijo električne energije
General Information
Frequently Asked Questions
ICS 29.240.99 is a classification code in the International Classification for Standards (ICS) system. It covers "Other equipment related to power transmission and distribution networks". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 242 standards classified under ICS 29.240.99 (Other equipment related to power transmission and distribution networks). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 29.240.99 - Other equipment related to power transmission and distribution networks
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
- 1 (current)
- 2
- 3
- 4
- 5
This part of IEC 60358 applies to:
Coupling capacitors and capacitor dividers, with rated voltage > 1 000 V, connected line to ground with the low-voltage terminal either permanently earthed or connected to devices, for applications listed hereunder and other similar uses.
This document serves as a basic standard for the coupling capacitors and capacitor dividers.The different parts of this standard series will present the supplementary specifications and tests, for example IEC 60358-2, IEC 60358-3 or IEC 60358-4.
Diagrams of coupling capacitor and capacitor divider to which this standard series applies are given in Figure A.1 and Figure A.2 (see Annex A).
- Standard82 pagesEnglish languagee-Library read for1 day
IEC 63563-5:2025 defines the low-level (physical layer and the data link layer) formats of data bits, data bytes, and data packets. In addition, it provides requirements and guidelines for load modulation and frequency-shift keying.
- Standard27 pagesEnglish languagee-Library read for1 day
IEC 60358-1:2025 is available as IEC 60358-1:2025 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60358-1:2025 This part of IEC 60358 applies to: Coupling capacitors and capacitor dividers, with rated voltage > 1 000 V, connected line to ground with the low-voltage terminal either permanently earthed or connected to devices, for applications listed hereunder and other similar uses. This document serves as a basic standard for the coupling capacitors and capacitor dividers.
- Standard82 pagesEnglish languagee-Library read for1 day
IEC 63563-7:2025 defines methods for ensuring that the power transfer proceeds without heating metal objects in the magnetic field of a Power Transmitter. Although the Power Transmitter may optionally use any of these methods, some of them require assistance by the Power Receiver.
- Standard54 pagesEnglish languagee-Library read for1 day
IEC 63563-9:2025 defines the architecture and application-level messaging for the Authentication of a Power Transmitter Product by a Power Receiver to ensure that the Power Transmitter Product is both Qi certified and the product of a registered manufacturer.
- Standard95 pagesEnglish languagee-Library read for1 day
IEC 63563-4:2025 comprises guidelines and requirements for Power Receiver design, including circuitry, power consumption, operating power levels, power transfer efficiency, and standby power.
- Standard60 pagesEnglish languagee-Library read for1 day
IEC 63563-8:2025 provides guidelines for detecting the presence of a Radio Frequency Identification (RFID) tag or Near Field Communication (NFC) card within the operating range of the Power Transmitter and preventing damage to the tag or card.
- Standard33 pagesEnglish languagee-Library read for1 day
IEC 63563-1:2025 introduces the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power
- Standard20 pagesEnglish languagee-Library read for1 day
IEC 63563-6:2025 defines the messaging between a Power Transmitter and a Power Receiver. The primary purpose of this messaging is to set up and control the power transfer. As a secondary purpose, it provides a transport mechanism for higher-level applications such as Authentication. The communications protocol comprises both the required order and timing relations of successive messages.
- Standard143 pagesEnglish languagee-Library read for1 day
IEC 63563-10:2025 defines MPP (Magnetic Power Profile), an extension to Qi v1.3 BPP (Baseline Power Profile). Manufacturers can use this specification to implement PTx and/or PRx that are interoperable.
- Standard168 pagesEnglish languagee-Library read for1 day
IEC 63563-3:2025 identifies basic physical design requirements and guidelines for Power Transmitter and Power Receiver Products, including product and system dimensions, alignment of the products, surface temperature rise, and indications to the user.
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 63563-2:2025 provides glossary of definitions, acronyms, and symbols for the the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 63563-11:2025 describes Magnetic power profile (MPP) which is a protocol extension that provides additional messages, new power states/modes, new power transfer contract elements, and aims to provide the following functionalities:
• Operating Frequency Negotiation
• Cloaking (Power Pause)
• Generic Information Exchange
• Simultaneous Data Stream Transactions
• Fast PTx to PRx communication
• Maximum Power and Power Control Profiles Determination
• Extended Power Negotiation
• Extended PTx/PRx Identification and Capabilities
• Extended Control Error Packets and Received Power Packets
• Power Transmitter Battery Level Reporting
• Ecosystem Scalability
MPP extension allows devices to operate under Restricted mode (no PTx communication) at 360kHz without performing any explicit negotiation with the Power Transmitter. This flexibility enables devices with limited resources (e.g., devices with no FSK support) to take advantage of the frequency change feature.
- Standard110 pagesEnglish languagee-Library read for1 day
IEC 60358-1:2025 This part of IEC 60358 applies to:
Coupling capacitors and capacitor dividers, with rated voltage > 1 000 V, connected line to ground with the low-voltage terminal either permanently earthed or connected to devices, for applications listed hereunder and other similar uses.
This document serves as a basic standard for the coupling capacitors and capacitor dividers.
- Standard77 pagesEnglish languagesale 15% off
- Standard86 pagesEnglish languagesale 15% off
- Standard80 pagesFrench languagesale 15% off
- Standard157 pagesEnglish and French languagesale 15% off
IEC 63380-3:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager.
This document specifies the application of relevant transport protocols; in this case, SPINE (smart premises interoperable neutral-message exchange), SHIP (smart home IP), and ECHONET Lite. Other communication protocols can be defined in future editions
- Standard184 pagesEnglish languagee-Library read for1 day
IEC 63380-2:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager. This document maps the generic use case functions defined in IEC 63380-1 to specific data model. This edition of this document defines specifically SPINE Resources and ECHONET Lite Resources mapped from the high-level use case functions defined in IEC 63380-1.
- Standard202 pagesEnglish languagee-Library read for1 day
IEC 63380-3:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager. This document specifies the application of relevant transport protocols; in this case, SPINE (smart premises interoperable neutral-message exchange), SHIP (smart home IP), and ECHONET Lite. Other communication protocols can be defined in future editions
- Standard184 pagesEnglish languagee-Library read for1 day
IEC 63380-2:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager. This document maps the generic use case functions defined in IEC 63380-1 to specific data model. This edition of this document defines specifically SPINE Resources and ECHONET Lite Resources mapped from the high-level use case functions defined in IEC 63380-1.
- Standard202 pagesEnglish languagee-Library read for1 day
IEC TR 63575:2025 provides general guidelines on the performance of power electronic reactive power shunt compensators in high voltage alternating current systems. It includes terms, definitions, symbols and abbreviated terms, introduction, applications and performance.
- Technical report32 pagesEnglish languagesale 15% off
IEC 63380-2:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager. This document maps the generic use case functions defined in IEC 63380-1 to specific data model. This edition of this document defines specifically SPINE Resources and ECHONET Lite Resources mapped from the high-level use case functions defined in IEC 63380-1.
- Standard198 pagesEnglish languagesale 15% off
- Standard210 pagesFrench languagesale 15% off
- Standard408 pagesEnglish and French languagesale 15% off
IEC 63380-3:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager.
This document specifies the application of relevant transport protocols; in this case, SPINE (smart premises interoperable neutral-message exchange), SHIP (smart home IP), and ECHONET Lite. Other communication protocols can be defined in future editions
- Standard180 pagesEnglish languagesale 15% off
- Standard197 pagesFrench languagesale 15% off
- Standard377 pagesEnglish and French languagesale 15% off
IEC 63380-1:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager.
This document specifies use cases, the sequences of information exchange and generic data models.
- Standard157 pagesEnglish languagee-Library read for1 day
IEC 63380-1:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager. This document specifies use cases, the sequences of information exchange and generic data models.
- Standard157 pagesEnglish languagee-Library read for1 day
IEC 63380-1:2025 defines the secure information exchange between local energy management systems and electric vehicle charging stations. The local energy management systems communicate to the charging station controllers via the resource manager.
This document specifies use cases, the sequences of information exchange and generic data models.
- Standard323 pagesEnglish and French languagesale 15% off
IEC PAS 61980-6:2025 addresses communication and activities of magnetic field dynamic wireless power transfer (MF-D-WPT) systems. The power transfer takes place while the electric vehicle (EV) is in motion.
The requirements in this document are intended to be applied for MF-D-WPT systems according to IEC PAS 61980-5 and ISO 5474-6.
Supply device fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 5474-6.
The aspects covered in this document include:
– operational and functional characteristics of the MF-D-WPT communication system and related activities
– operational and functional characteristics of the positioning system
The following aspects are under consideration for future documents:
– requirements for two- and three-wheel vehicles,
– requirements for bidirectional power transfer
- Technical specification76 pagesEnglish languagesale 15% off
IEC 63563-6:2025 defines the messaging between a Power Transmitter and a Power Receiver. The primary purpose of this messaging is to set up and control the power transfer. As a secondary purpose, it provides a transport mechanism for higher-level applications such as Authentication. The communications protocol comprises both the required order and timing relations of successive messages.
- Standard143 pagesEnglish languagee-Library read for1 day
IEC 63563-1:2025 introduces the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power
- Standard20 pagesEnglish languagee-Library read for1 day
IEC 63563-4:2025 comprises guidelines and requirements for Power Receiver design, including circuitry, power consumption, operating power levels, power transfer efficiency, and standby power.
- Standard60 pagesEnglish languagee-Library read for1 day
IEC 63563-5:2025 defines the low-level (physical layer and the data link layer) formats of data bits, data bytes, and data packets. In addition, it provides requirements and guidelines for load modulation and frequency-shift keying.
- Standard27 pagesEnglish languagee-Library read for1 day
IEC 63563-7:2025 defines methods for ensuring that the power transfer proceeds without heating metal objects in the magnetic field of a Power Transmitter. Although the Power Transmitter may optionally use any of these methods, some of them require assistance by the Power Receiver.
- Standard54 pagesEnglish languagee-Library read for1 day
IEC 63563-3:2025 identifies basic physical design requirements and guidelines for Power Transmitter and Power Receiver Products, including product and system dimensions, alignment of the products, surface temperature rise, and indications to the user.
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 63563-2:2025 provides glossary of definitions, acronyms, and symbols for the the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 63563-10:2025 defines MPP (Magnetic Power Profile), an extension to Qi v1.3 BPP (Baseline Power Profile). Manufacturers can use this specification to implement PTx and/or PRx that are interoperable.
- Standard168 pagesEnglish languagee-Library read for1 day
IEC 63563-9:2025 defines the architecture and application-level messaging for the Authentication of a Power Transmitter Product by a Power Receiver to ensure that the Power Transmitter Product is both Qi certified and the product of a registered manufacturer.
- Standard95 pagesEnglish languagee-Library read for1 day
IEC 63563-11:2025 describes Magnetic power profile (MPP) which is a protocol extension that provides additional messages, new power states/modes, new power transfer contract elements, and aims to provide the following functionalities: • Operating Frequency Negotiation • Cloaking (Power Pause) • Generic Information Exchange • Simultaneous Data Stream Transactions • Fast PTx to PRx communication • Maximum Power and Power Control Profiles Determination • Extended Power Negotiation • Extended PTx/PRx Identification and Capabilities • Extended Control Error Packets and Received Power Packets • Power Transmitter Battery Level Reporting • Ecosystem Scalability MPP extension allows devices to operate under Restricted mode (no PTx communication) at 360kHz without performing any explicit negotiation with the Power Transmitter. This flexibility enables devices with limited resources (e.g., devices with no FSK support) to take advantage of the frequency change feature.
- Standard110 pagesEnglish languagee-Library read for1 day
IEC 63563-8:2025 provides guidelines for detecting the presence of a Radio Frequency Identification (RFID) tag or Near Field Communication (NFC) card within the operating range of the Power Transmitter and preventing damage to the tag or card.
- Standard33 pagesEnglish languagee-Library read for1 day
- Corrigendum4 pagesEnglish languagee-Library read for1 day
IEC 63563-8:2025 provides guidelines for detecting the presence of a Radio Frequency Identification (RFID) tag or Near Field Communication (NFC) card within the operating range of the Power Transmitter and preventing damage to the tag or card.
- Standard31 pagesEnglish languagesale 15% off
- Standard85 pagesFrench languagesale 15% off
- Standard85 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-6:2025 defines the messaging between a Power Transmitter and a Power Receiver. The primary purpose of this messaging is to set up and control the power transfer. As a secondary purpose, it provides a transport mechanism for higher-level applications such as Authentication. The communications protocol comprises both the required order and timing relations of successive messages.
This corrected version of IEC 63563-6:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard141 pagesEnglish languagesale 15% off
- Standard289 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-7:2025 defines methods for ensuring that the power transfer proceeds without heating metal objects in the magnetic field of a Power Transmitter. Although the Power Transmitter may optionally use any of these methods, some of them require assistance by the Power Receiver.
This corrected version of IEC 63563-7:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard51 pagesEnglish languagesale 15% off
- Standard113 pagesEnglish and French languagesale 15% off
IEC 63563-9:2025 defines the architecture and application-level messaging for the Authentication of a Power Transmitter Product by a Power Receiver to ensure that the Power Transmitter Product is both Qi certified and the product of a registered manufacturer.
- Standard93 pagesEnglish languagesale 15% off
- Standard97 pagesFrench languagesale 15% off
- Standard190 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-5:2025 defines the low-level (physical layer and the data link layer) formats of data bits, data bytes, and data packets. In addition, it provides requirements and guidelines for load modulation and frequency-shift keying.
This corrected version of IEC 63563-5:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard25 pagesEnglish languagesale 15% off
- Standard52 pagesEnglish and French languagesale 15% off
IEC 63563-11:2025 describes Magnetic power profile (MPP) which is a protocol extension that provides additional messages, new power states/modes, new power transfer contract elements, and aims to provide the following functionalities:
• Operating Frequency Negotiation
• Cloaking (Power Pause)
• Generic Information Exchange
• Simultaneous Data Stream Transactions
• Fast PTx to PRx communication
• Maximum Power and Power Control Profiles Determination
• Extended Power Negotiation
• Extended PTx/PRx Identification and Capabilities
• Extended Control Error Packets and Received Power Packets
• Power Transmitter Battery Level Reporting
• Ecosystem Scalability
MPP extension allows devices to operate under Restricted mode (no PTx communication) at 360kHz without performing any explicit negotiation with the Power Transmitter. This flexibility enables devices with limited resources (e.g., devices with no FSK support) to take advantage of the frequency change feature.
- Standard108 pagesEnglish languagesale 15% off
- Standard116 pagesFrench languagesale 15% off
- Standard224 pagesEnglish and French languagesale 15% off
IEC 63563-10:2025 defines MPP (Magnetic Power Profile), an extension to Qi v1.3 BPP (Baseline Power Profile). Manufacturers can use this specification to implement PTx and/or PRx that are interoperable.
- Standard166 pagesEnglish languagesale 15% off
- Standard212 pagesFrench languagesale 15% off
- Standard378 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-3:2025 identifies basic physical design requirements and guidelines for Power Transmitter and Power Receiver Products, including product and system dimensions, alignment of the products, surface temperature rise, and indications to the user.
This corrected version of IEC 63563-3:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard17 pagesEnglish languagesale 15% off
- Standard33 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-1:2025 introduces the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power
This corrected version of IEC 63563-1:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard18 pagesEnglish languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-4:2025 comprises guidelines and requirements for Power Receiver design, including circuitry, power consumption, operating power levels, power transfer efficiency, and standby power.
This corrected version of IEC 63563-4:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard58 pagesEnglish languagesale 15% off
- Standard118 pagesEnglish and French languagesale 15% off
CORRECTED VERSION 2026-03
IEC 63563-2:2025 provides glossary of definitions, acronyms, and symbols for the the Qi Specification, which applies to flat surface devices such as mobile phones and tablets that use up to 15 W of power
This corrected version of IEC 63563-2:2025 incorporates the following correction:
- correction of the publication date on the cover page.
- Standard17 pagesEnglish languagesale 15% off
- Standard34 pagesEnglish and French languagesale 15% off
No scope available
- Amendment7 pagesEnglish languagee-Library read for1 day
IEC TR 62263:2024 covers procedures for the installation and maintenance of optical fibre cables on single and multi-circuit overhead power lines, including:
– optical ground wire (OPGW) fibre cable;
– optical phase conductor fibre cable (OPPC);
– optical attached fibre cable (OPAC);
– all dielectric self supporting (ADSS) optical fibre cable.
Relevant electrical hazards are also discussed.
- Technical report33 pagesEnglish languagesale 15% off
- 1 (current)
- 2
- 3
- 4
- 5