03.100 - Company organization and management. Management systems
ICS 03.100 Details
Company organization and management. Management systems
Betriebswirtschaft. Betriebsleitung
Organisation et gestion d'entreprise
Organizacija in vodenje podjetja. Sistemi vodenja
General Information
Frequently Asked Questions
ICS 03.100 is a classification code in the International Classification for Standards (ICS) system. It covers "Company organization and management. Management systems". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1987 standards classified under ICS 03.100 (Company organization and management. Management systems). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 03.100 - Company organization and management. Management systems
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies a process for a medical laboratory to identify and manage the risks to patients, laboratory workers and service providers that are associated with medical laboratory examinations. The process includes identifying, estimating, evaluating, controlling and monitoring the risks.
The requirements of this document are applicable to all aspects of the examinations and services of a medical laboratory, including the pre-examination, examination, and post-examination aspects including accurate transmission of examination results into the electronic medical record, as well as other technical and management processes described in ISO 15189.
This document does not specify acceptable levels of risk.
This document does not apply to risks from post-examination clinical decisions made by healthcare providers.
This document complements the management of risks affecting medical laboratory enterprises that are addressed by ISO 31000, such as business, economic, legal, and regulatory risks.
- Standard92 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and provides guidance for establishing, implementing, maintaining and continually improving an AI (artificial intelligence) management system within the context of an organization.
This document is intended for use by an organization providing or using products or services that utilize AI systems. This document is intended to help the organization develop, provide or use AI systems responsibly in pursuing its objectives and meet applicable requirements, obligations related to interested parties and expectations from them.
This document is applicable to any organization, regardless of size, type and nature, that provides or uses products or services that utilize AI systems.
- Standard62 pagesEnglish languagee-Library read for1 day
This document specifies principles and requirements for a body operating certification of persons and includes the development and maintenance of a scheme for certification of persons.
NOTE 1 For the purposes of this document, the term "certification body" is used in place of the full term " body operating certification of persons", and the term "certification scheme" is used in place of the full term “scheme for certification of persons”.
NOTE 2 Annex A contains principles for certification of persons.
- Standard36 pagesEnglish languagee-Library read for1 day
IEC SRD 63347-2:2026 describes and analyses a comprehensive set of high-level scenarios of how smart cities can best respond to public health emergencies, and strengthen their “Urban Immune System”, using evidence from as many countries as possible. It covers use cases related to the prevention, the control and the successful ending of public health emergencies, and to dealing with the longer-term harm that these may cause. It considers a wide range of different scenarios and reviews both the management challenges and the range of technology solutions, including the use of IoT, 5G, AI, Big Data, and Cloud Computing, available in each of them, in order to provide a comprehensive outline of the standardization requirements to develop an effective Urban Immune System. The public health emergencies envisaged are those relating to pandemics resulting from novel forms of disease, for which there is no natural immunity within the population and no tried and tested treatment. However, some of its provisions will be helpful to dealing with pandemics of existing diseases such as typhoid and cholera brought on through natural disasters or war. This document will provide useful information to International and national Standards Development Organizations and thus facilitate and promote the development of the smart city standards required.
- Standardization document32 pagesEnglish languagesale 15% off
This document specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. This document helps an organization to achieve the intended outcomes of its environmental management system, which provide value for the environment, the organization itself and interested parties. The intended outcomes of an environmental management system include: enhancing environmental performance; meeting compliance obligations; achieving environmental objectives. This document is applicable to any organization, regardless of size, type or nature, and applies to the environmental aspects of its activities, products and services that the organization determines it can either control or influence considering a life cycle perspective. This document does not state specific environmental performance criteria. This document can be used in whole or in part to systematically improve environmental management. Claims of conformity to this document, however, are not acceptable unless all its requirements are incorporated into an organization’s environmental management system and fulfilled without exclusion.
- Standard36 pagesEnglish languagesale 15% off
- Standard36 pagesEnglish languagesale 15% off
- Standard38 pagesFrench languagesale 15% off
- Standard38 pagesFrench languagesale 15% off
- Standard38 pagesSpanish languagesale 15% off
- Standard38 pagesSpanish languagesale 15% off
This document specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability.
This document helps an organization to achieve the intended outcomes of its environmental management system, which provide value for the environment, the organization itself and interested parties. The intended outcomes of an environmental management system include:
enhancing environmental performance;
meeting compliance obligations;
achieving environmental objectives.
This document is applicable to any organization, regardless of size, type or nature, and applies to the environmental aspects of its activities, products and services that the organization determines it can either control or influence considering a life cycle perspective. This document does not state specific environmental performance criteria.
This document can be used in whole or in part to systematically improve environmental management. Claims of conformity to this document, however, are not acceptable unless all its requirements are incorporated into an organization’s environmental management system and fulfilled without exclusion.
- Draft45 pagesEnglish languagee-Library read for1 day
This document gives guidance on developing, managing and implementing public warning before, during and after incidents.
This document is applicable to any organization responsible for public warning. It is applicable at all levels, from local up to international.
Before planning and implementing the public warning system, the risks and consequences of potential hazards are assessed. This process is not part of this document.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies quality requirements for the chart, test procedure and acceptance level for near, far, and colour vision acuity of NDT personnel. Information for grey scale perception and low contrast can be found in the annexes. This document also specifies the qualification requirements for personnel permitted to carry out the test.
This document is only applicable to vision acuity under defined conditions similar to those encountered during routine NDT inspection. This document does not address an individual’s overall visual acuity and users are advised to consider the need for a general eye examination by specialist medical personnel to ensure general vision acuity.
- Draft21 pagesEnglish languagee-Library read for1 day
This document specifies quality requirements for the chart, test procedure and acceptance level for near, far, and colour vision acuity of NDT personnel. Information for grey scale perception and low contrast can be found in the annexes. This document also specifies the qualification requirements for personnel permitted to carry out the test. This document is only applicable to vision acuity under defined conditions similar to those encountered during routine NDT inspection. This document does not address an individual’s overall visual acuity and users are advised to consider the need for a general eye examination by specialist medical personnel to ensure general vision acuity.
- Standard18 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
This document gives guidance on developing, managing and implementing public warning before, during and after incidents.
This document is applicable to any organization responsible for public warning. It is applicable at all levels, from local up to international.
Before planning and implementing the public warning system, the risks and consequences of potential hazards are assessed. This process is not part of this document.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the requirements and provides guidance for establishing, implementing, maintaining and continually improving an AI (artificial intelligence) management system within the context of an organization.
This document is intended for use by an organization providing or using products or services that utilize AI systems. This document is intended to help the organization develop, provide or use AI systems responsibly in pursuing its objectives and meet applicable requirements, obligations related to interested parties and expectations from them.
This document is applicable to any organization, regardless of size, type and nature, that provides or uses products or services that utilize AI systems.
- Standard62 pagesEnglish languagee-Library read for1 day
IEC 60050-831:2025 gives the terms and definitions used in smart cities and smart city systems, as well as general terms pertaining to specific applications and associated technologies. This terminology is consistent with the terminology developed in the other specialized parts of the IEV. It has the status of a horizontal standard in accordance with IEC Guide 108.
- Standard64 pagesEnglish and French languagee-Library read for1 day
- Standard50 pagesEnglish and French languagesale 15% off
This document provides an analysis of various case studies for the implementation of specific aspects of the circular economy in organizations, regardless of their status. This document specifically focuses on performance-based approaches such as functional economy, service economy, product-as-a-service (PaaS) and other performance-based approaches. This document mainly describes a selection of use cases of operational implementation of such performance-based approaches as observed in different organizations. It stresses the challenging context faced by concerned organizations in changing their economic and business models. This document depicts cultural, organizational and industrial changes induced by the move of business models toward a performance-based approach. It emphasizes to what extent the total economic value can increase and how this is converted into revenue streams for the concerned organizations. This document does not apply to the implementation of any circular economy domain of actions (circular design, recycling; responsible purchase policy, etc.), but focuses on the systemic level of development of economic models based on the commercialization of various performance aspects.
- Technical report40 pagesEnglish languagesale 15% off
This document specifies the requirements for a measurement management system when an organization:
needs to demonstrate its ability to consistently ensure confidence in validity and reliability of measurement results and thereby to provide a consistent level of measurement quality for an organization’s products and services;
aims to rely on reliable and valid measurement results useful to enhance customer satisfaction and effectively apply its measurement management system processes;
implements processes for a measurement management system that enhance conformity with customer, statutory and regulatory requirements.
All the requirements of this document are generic. This document is applicable to any organization, regardless of its type or size, or the products and services it provides. This includes organizations manufacturing products and providing engineering services (except for calibration and test services included within the scope of ISO/IEC 17025).
This document is not intended to substitute requirements for, or to add requirements to, the general requirements for the competence of testing and calibration laboratories specified in ISO/IEC 17025.
NOTE For organizations that operate internal testing and calibration laboratories, the competence of those functions can be evaluated in accordance with ISO/IEC 17025.
- Standard55 pagesEnglish languagee-Library read for1 day
1.1 General
This document establishes the minimum requirements for the qualification and certification of personnel performing nondestructive testing (NDT), nondestructive inspection (NDI), or nondestructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this document, the term NDT will be used and will be considered equivalent to NDI and NDE.
In Europe, the term "approval" is used to denote a written statement by an employer that an individual has met specific requirements and has operating approval. The term "certification" as defined in 3.3 is used throughout this document as a substitute for the term "approval". Except when otherwise specified in the written practice, certification in accordance with this document includes operating approval.
1.2 Purpose
1.2.1 Applicability
This document applies to personnel who:
- use NDT methods or equipment to test and/or accept materials, products, components, assemblies or sub-assemblies;
- are directly responsible for the technical adequacy of the NDT methods and equipment used;
- operate automatic interpretation or evaluation systems;
- approve NDT procedures or work instructions;
- audit NDT facilities; or
- provide technical NDT support or training.
This document does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3. See Clause 8 regarding applicability to personnel performing specialized inspections using certain direct readout instruments.
1.2.2 Implementation
This document addresses the use of a National Aerospace NDT Board (NANDTB). NANDTBs are only used as specified per Annex C and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS410/EN 4179 need not recertify to the requirements of this document until their current certification expires.
1.2.3 NDT methods
This document contains detailed requirements for the following NDT methods:
eddy current testing (ET)
penetrant testing (PT)
magnetic particle testing (MT)
radiographic testing (RT)
shearography testing (ST)
thermographic testing (IRT)
ultrasonic testing (UT)
When invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this document applies to other NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, sub-assembly or assembly. Such methods can include, but are not limited to, acoustic emission, neutron radiography, leak testing, and holography.
- Standard39 pagesEnglish languagee-Library read for1 day
This document provides guidance to contracting authorities on how to determine contract award criteria to meet the accessibility requirements of Directive (EU) 2019/882 (European Accessibility Act, EAA) and Directive (EU) 2016/2102 (Web Accessibility Directive, WAD); and on how to verify the conformance of publicly procured ICT products and services with these requirements. The present document describes how the accessibility requirements for the ICT should be specified, documented and assessed in the frame of the procurement process, under the EU public procurement directives1. The different mechanisms for conformity assessment with the applicable accessibility requirements are explained. It discusses how these mechanisms can be applied both in the pre-procurement research phase and when awarding a contract, as well as part of contract management in the post-award stage.
This document also provides a useful guidance for bidders who prepare an offer for public procurement of ICT products and services, and others aiming to procure accessible ICT.
Aspects that do not deal with accessibility in ICT procurement in Europe are outside the scope of this document.
- Technical specification55 pagesEnglish languagee-Library read for1 day
This document presents case studies and insights into the practical application of green logistics. The cases are delineated across various operational scenarios, including transport, storing, loading and unloading, handling, package, distribution processing, distribution and information processing. The objective of this document is to facilitate organizations in comprehending green logistics activities.
- Technical report48 pagesEnglish languagesale 15% off
This document specifies the requirements for a measurement management system when an organization:
needs to demonstrate its ability to consistently ensure confidence in validity and reliability of measurement results and thereby to provide a consistent level of measurement quality for an organization’s products and services;
aims to rely on reliable and valid measurement results useful to enhance customer satisfaction and effectively apply its measurement management system processes;
implements processes for a measurement management system that enhance conformity with customer, statutory and regulatory requirements.
All the requirements of this document are generic. This document is applicable to any organization, regardless of its type or size, or the products and services it provides. This includes organizations manufacturing products and providing engineering services (except for calibration and test services included within the scope of ISO/IEC 17025).
This document is not intended to substitute requirements for, or to add requirements to, the general requirements for the competence of testing and calibration laboratories specified in ISO/IEC 17025.
NOTE For organizations that operate internal testing and calibration laboratories, the competence of those functions can be evaluated in accordance with ISO/IEC 17025.
- Standard55 pagesEnglish languagee-Library read for1 day
The European Commission will in its project "VAT in the digital age" (ViDA) mandate that VAT reporting on intra-EU transactions is performed in near real-time and based on EN 16931-1. This Technical Report defines the impact of this legislation on the various deliverables of CEN/TC 434, with a focus on the subset to be sent to tax authorities and how EN 16931-1 needs to be changed. The ViDA package applies to all EU member states and specific territories where the VAT legislation applies (e.g. Northern Ireland in respect to goods).
This document does not define the content of the common electronic message based on the electronic invoice to be sent to the authorities. The definition of that common electronic message (DRR message) is a task of the European Commission, possibly with help of CEN. As the DRR message is not an invoice, but a VAT report, it is not to be regarded as a Core Invoice Usage Specification (CIUS). The DRR message therefore needs not to obey the rules for developing a CIUS. For example, not all mandatory elements in the invoice need to be part of the DRR message.
- Technical report31 pagesEnglish languagee-Library read for1 day
This document specifies the requirements for a measurement management system when an organization: needs to demonstrate its ability to consistently ensure confidence in validity and reliability of measurement results and thereby to provide a consistent level of measurement quality for an organization’s products and services; aims to rely on reliable and valid measurement results useful to enhance customer satisfaction and effectively apply its measurement management system processes; implements processes for a measurement management system that enhance conformity with customer, statutory and regulatory requirements. All the requirements of this document are generic. This document is applicable to any organization, regardless of its type or size, or the products and services it provides. This includes organizations manufacturing products and providing engineering services (except for calibration and test services included within the scope of ISO/IEC 17025). This document is not intended to substitute requirements for, or to add requirements to, the general requirements for the competence of testing and calibration laboratories specified in ISO/IEC 17025. NOTE For organizations that operate internal testing and calibration laboratories, the competence of those functions can be evaluated in accordance with ISO/IEC 17025.
- Standard46 pagesEnglish languagesale 15% off
- Standard48 pagesFrench languagesale 15% off
This document gives guidance on practices of earned value management in project, programme and portfolio management. It is applicable to any type of organization, including public or private, and any size or sector, as well as any type of project, or programme or portfolio in terms of complexity, size or duration. This document provides the following: descriptions of the purpose and benefits of earned value management; integration and relationship with project, programme and portfolio management; overview of the processes and process descriptions; basic needs for an earned value management system; use of an earned value management system. This document does not provide guidance on the use of specific processes, methods or tools in the practice of earned value management. Annex A describes an integrated baseline review. It is contained in an annex since it is used by government organizations and their contractors but is not used by most organizations, most of the time.
- Standard42 pagesEnglish languagesale 15% off
This Technical Report (TR) provides guidance to contracting authorities on how to determine contract award criteria to meet the accessibility requirements of Directive (EU) 2019/882 (European Accessibility Act, EAA) and Directive (EU) 2016/2102 (Web Accessibility Directive, WAD); and on how to verify the conformance of publicly procured ICT products and services with these requirements. The present document describes how the accessibility requirements for the procured ICT should be specified, documented and assessed in the frame of the procurement process, under the EU Public Procurement Directives1. The different mechanisms for conformity assessment with the applicable accessibility requirements are explained. It is discussed how these mechanisms may be applied both in the pre-procurement research phase and when awarding a contract, as well as part of contract management in the post-award stage. This Technical Report also provides a useful guidance for bidders who prepare an offer for public procurement of ICT products and services, and others aiming to procure accessible ICT.
- Technical specification55 pagesEnglish languagee-Library read for1 day
1.1 General
This document establishes the minimum requirements for the qualification and certification of personnel performing nondestructive testing (NDT), nondestructive inspection (NDI), or nondestructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this document, the term NDT will be used and will be considered equivalent to NDI and NDE.
In Europe, the term "approval" is used to denote a written statement by an employer that an individual has met specific requirements and has operating approval. The term "certification" as defined in 3.3 is used throughout this document as a substitute for the term "approval". Except when otherwise specified in the written practice, certification in accordance with this document includes operating approval.
1.2 Purpose
1.2.1 Applicability
This document applies to personnel who:
- use NDT methods or equipment to test and/or accept materials, products, components, assemblies or sub-assemblies;
- are directly responsible for the technical adequacy of the NDT methods and equipment used;
- operate automatic interpretation or evaluation systems;
- approve NDT procedures or work instructions;
- audit NDT facilities; or
- provide technical NDT support or training.
This document does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3. See Clause 8 regarding applicability to personnel performing specialized inspections using certain direct readout instruments.
1.2.2 Implementation
This document addresses the use of a National Aerospace NDT Board (NANDTB). NANDTBs are only used as specified per Annex C and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS410/EN 4179 need not recertify to the requirements of this document until their current certification expires.
1.2.3 NDT methods
This document contains detailed requirements for the following NDT methods:
eddy current testing (ET)
penetrant testing (PT)
magnetic particle testing (MT)
radiographic testing (RT)
shearography testing (ST)
thermographic testing (IRT)
ultrasonic testing (UT)
When invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this document applies to other NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, sub-assembly or assembly. Such methods can include, but are not limited to, acoustic emission, neutron radiography, leak testing, and holography.
- Standard39 pagesEnglish languagee-Library read for1 day
This document provides supplemental information and guidance on how to implement the requirements listed in ISO 35001 [1]. This document does not add requirements to those in ISO 35001 [1].
- Technical specification139 pagesEnglish languagesale 15% off
This document provides requirements and guidelines for the application of the mass balance chain of custody model, as defined in ISO 22095, to any material or product flow within mass balance systems, including how to attribute specified characteristics to flows of such processes. This document provides requirements and guidelines for the following matters, amongst others: differentiations from controlled blending and book and claim models; general requirements for organizations active in a mass balance chain of custody model; system boundaries including geography and time; conversion factors; the rolling average percentage method; the credit method; transparency, communication and claims.
- Standard45 pagesEnglish languagesale 15% off
This document provides requirements and guidelines for the application of the book and claim chain of custody model. It is applicable to any flow of materials or products or processes within a system, including how to attribute specified characteristics to flows of such processes. This document provides requirements and guidelines for the following matters, amongst others: general requirements for the book and claim chain of custody model; differentiations from mass balance; system boundaries including geography and time; attribution of material flows in and out; conversion factors; transparency, communication and claims.
- Standard18 pagesEnglish languagesale 15% off
This document establishes an organized set of concepts and relationships to understand the competency requirements for information security conformance-testing and evaluation specialists, thereby establishing a basis for shared understanding of the concepts and principles central to the ISO/IEC 19896 series across its user communities.
- Standard20 pagesEnglish languagee-Library read for1 day
- Standard20 pagesEnglish languagee-Library read for1 day
This document provides information security controls for the energy utility industry, based on ISO/IEC 27002:2022, for controlling and monitoring the production or generation, transmission, storage and distribution of electric power, gas, oil and heat, and for the control of associated supporting processes. This includes in particular the following:
— central and distributed process control, monitoring and automation technology as well as information systems used for their operation, such as programming and parameterization devices;
— digital controllers and automation components such as control and field devices or programmable logic controllers (PLCs), including digital sensor and actuator elements;
— all further supporting information systems used in the process control domain, e.g. for supplementary data visualization tasks and for controlling, monitoring, data archiving, historian logging, reporting and documentation purposes;
— communication technology used in the process control domain, e.g. networks, telemetry, telecontrol applications and remote-control technology;
— Advanced metering infrastructure (AMI) components, e.g. smart meters;
— measurement devices, e.g. for emission values;
— digital protection and safety systems, e.g. protection relays, safety PLCs, emergency governor mechanisms;
— energy management systems, e.g. for distributed energy resources (DER), electric charging infrastructures, and for private households, residential buildings or industrial customer installations;
— distributed components of smart grid environments, e.g. in energy grids, in private households, residential buildings or industrial customer installations;
— all software, firmware and applications installed on above-mentioned systems, e.g. distribution management system (DMS) applications or outage management systems (OMS);
— any premises housing the abovementioned equipment and systems;
— remote maintenance systems for abovementioned systems.
This document does not apply to the process control domain of nuclear facilities. This domain is covered by IEC 63096.
- Standard50 pagesEnglish languagee-Library read for1 day
This document provides the specialized requirements for individuals to demonstrate competence in performing IT product security evaluations and reviews according to the ISO/IEC 15408 series and ISO/IEC 18045.
NOTE It is possible that evaluators and testers belong to bodies operating under ISO/IEC 17025 and reviewers belong to bodies operating under ISO/IEC 17065.
- Standard54 pagesEnglish languagee-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
This document gives guidance on the evaluation of projects and programmes after they have been closed, including guidance to the reviewers and contributors involved in these evaluations. Post-project or post-programme evaluations focus on evaluating the achievement of objectives, actual outcomes and actual realization of benefits, whether the outcomes or benefits are likely to fulfil expectations in future and the effectiveness of governance and management of the project or programme. This document includes guidance for setting, planning, organizing and conducting post-project and post-programme evaluations. It is applicable to any organization, including public, private and charitable, as well as, to any type of project or programme, regardless of purpose, delivery approaches, life cycle model used, complexity, size, cost or duration. This document does not apply to evaluations that occur before projects or programmes have started or during the implementation of a project or programme.
- Standard23 pagesEnglish languagesale 15% off
The scope of the present document is to provide the elements needed for elaborating the programme execution logic and drafting the execution plan for the realization of a product.
NOTE 1 In this document, the term “logic” alone is sometimes used for “execution logic”.
NOTE 2 In this document, the term “product” is used to designate the object of the program concerned, and the term “system” is used to designate the product for anything related to system engineering.
NOTE 3 The product is also considered a “system-of-interest” and its enabling systems are also taken into account.
The execution logic and plan enable customers/suppliers to reach an agreement on how their respective processes and activities can be organized.
The aim is to enable each actor in the programme to manage their activities with sufficient visibility of the sequencing of the other stakeholdersʼ activities.
This document belongs to the documents supporting EN 9200 relating to the programme management specification.
The present document describes the principles of programme execution logic and defines the corresponding management requirements. This description is supplemented:
— on the one hand, in terms of execution logic principles, by:
— the challenges of a basic logic common to all actors (synchronization);
— the applicable criteria to set up this basic logic;
— the translation of this logic into the programme processes;
— on the other hand, in terms of implementing the execution logic, by:
— the procedures for practical implementation of the management requirements defined in EN 9200;
— adaptations of the logic according to the various constraints and specificities of the programme, and justification of these adaptations;
— the consistency between the basic logic at system level and the logics at subsystem and constituent levels.
The breakdown of clauses as used in this document gives a gradual understanding of the approach to be adopted to construct an execution logic. For instance:
— Clause 5 presents the end-purpose of a programme execution logic as well as the associated basic concepts and the constituents of this logic;
— Clause 6 describes and characterizes the process for building the logic;
— Clause 7 concerns change control to the execution logic;
— Clause 8 concentrates on the importance of capitalization and lessons learned.
This document applies to aeronautical, space and defence programmes. The principles can be extended to other areas of activity.
It applies to realization of a single product, of several samples or of a series. It applies to any customer/supplier level, while ensuring consistency between successive levels.
The principles described concern all programme actors, from initial expression of need through to closure of the programme.
- Standard47 pagesEnglish languagee-Library read for1 day
This document specifies requirements for a valuation of energy related investments (VALERI). It provides a description on how to gather, calculate, evaluate and document information in order to create solid business cases based on Net Present Value calculations for ERIs. The standard is applicable for the valuation of any kind of energy related investment.
The document focusses mainly on the valuation and documentation of the economic impacts of ERIs. However, non-economic effects (e.g. noise reduction) that can occur through undertaking an investment are also considered. Thus, qualitative effects (e.g. impact on the environment) - even if they are non-monetisable - are taken into consideration.
- Standard59 pagesEnglish languagee-Library read for1 day
The purpose of this document is to:
— identify and describe, in a structured way, the principles of the integrated logistic support (ILS) activities and tasks for the main types of stakeholders in the system life cycle, from the expression of need to disposal;
— place the activities, tasks and ILS deliverables within the programme execution;
— identify the main selection and sizing of activities and tasks criteria according to the nature and the requirements of the programme;
— control the relations with the other aspects of programme management.
This document covers the following subjects:
— management of ILS (definition, implementation and running of the processes);
— expression of the support requirements;
— elaboration of the contracts (e.g. for development, maintenance, supply);
— implementation of the tasks and processes.
This document is also related to the following subjects:
— relations with costs and lead times control, configuration management, performance and RAMS management, quality assurance, documentation management;
— regulations (e.g. information system security, export controls, safety at work);
— human and organizational factors (HOF);
— environment (e.g. RoHS, REACh);
— information systems (IS) and the links between them;
— logistics information systems (LIS);
— in-service support (ISS) activities;
— configuration management of ILS objects;
— life cycle.
The following stakeholders are concerned by ILS:
— users in the broadest sense: operators, maintenance operators, administrators, dismantlers of the system, trainers;
— the customer, who:
— prepares technical and contractual specifications of need with which the system will comply;
— sets up the funding of the programme;
— oversees the realization and commissioning of the main system and of the support system;
— facilitates the feedback.
NOTE 1 At the highest level of the system, the customer can also be referred to as the “project owner”.
NOTE 2 The “main system” can also be referred to as the “system of interest”.
— the supplier(s) who deliver a system (main and support) to the customer, which meets the performance specifications on time and for the agreed cost, throughout the system life cycle;
NOTE 3 At the highest level of the system, the supplier can also be referred to as the “industrial prime contractor”.
— the regulatory authorities that supervise and approve the support processes and equipment, as needed.
The principles laid down in this document can be applied, after adaptation, to all the customer/supplier relations resulting from the breakdown of the main contract into sub-contracts.
- Standard41 pagesEnglish languagee-Library read for1 day
This document provides the framework and principles for the energy resilience of organizations, to help reduce impacts and ultimately achieve a build back better goal after disruptive events, including natural and human-made disruptions. It covers broad resilience engineering and management principles applicable to an energy supply network that includes social and technical considerations. This document does not provide guidance on the application of these principles for engineering design, which require specialized considerations to address risks and define resilience measures. This document is intended to be used by organizations responsible for, or participating in, energy supply networks.
- Standard15 pagesEnglish languagesale 15% off
The purpose of this document is to:
— identify and describe, in a structured way, the principles of the integrated logistic support (ILS) activities and tasks for the main types of stakeholders in the system life cycle, from the expression of need to disposal;
— place the activities, tasks and ILS deliverables within the programme execution;
— identify the main selection and sizing of activities and tasks criteria according to the nature and the requirements of the programme;
— control the relations with the other aspects of programme management.
This document covers the following subjects:
— management of ILS (definition, implementation and running of the processes);
— expression of the support requirements;
— elaboration of the contracts (e.g. for development, maintenance, supply);
— implementation of the tasks and processes.
This document is also related to the following subjects:
— relations with costs and lead times control, configuration management, performance and RAMS management, quality assurance, documentation management;
— regulations (e.g. information system security, export controls, safety at work);
— human and organizational factors (HOF);
— environment (e.g. RoHS, REACh);
— information systems (IS) and the links between them;
— logistics information systems (LIS);
— in-service support (ISS) activities;
— configuration management of ILS objects;
— life cycle.
The following stakeholders are concerned by ILS:
— users in the broadest sense: operators, maintenance operators, administrators, dismantlers of the system, trainers;
— the customer, who:
— prepares technical and contractual specifications of need with which the system will comply;
— sets up the funding of the programme;
— oversees the realization and commissioning of the main system and of the support system;
— facilitates the feedback.
NOTE 1 At the highest level of the system, the customer can also be referred to as the “project owner”.
NOTE 2 The “main system” can also be referred to as the “system of interest”.
— the supplier(s) who deliver a system (main and support) to the customer, which meets the performance specifications on time and for the agreed cost, throughout the system life cycle;
NOTE 3 At the highest level of the system, the supplier can also be referred to as the “industrial prime contractor”.
— the regulatory authorities that supervise and approve the support processes and equipment, as needed.
The principles laid down in this document can be applied, after adaptation, to all the customer/supplier relations resulting from the breakdown of the main contract into sub-contracts.
- Standard41 pagesEnglish languagee-Library read for1 day
This document specifies the competencies required of assistance dogs’ professionals. The purpose of this document is to improve and ensure the quality of professionals working in a role within an assistance dog organization. Each speciality of assistance dog requires a specific set of role competencies and there are some common core competencies.
Core competencies in:
- breeding;
- puppy raising;
- dog care;
- assessors;
- orientation and mobility;
- trainers;
- instructors.
Specific competencies to train:
- guide dogs;
- hearing dogs;
- medical alert dogs;
- mobility assistance dogs;
- autism and development disorder dogs;
- team training instructor.
It is accepted that assistance dog organisations vary greatly in structure and not every organization will have all the roles identified. Where one person performs more than one role, it is expected that they will have the competencies of all the roles they perform e.g. a dog trainer may also have the competencies of a dog care specialist. And there will be some organisations where some of these roles are not required, e.g. those with no breeding programme will not require the associated role competencies.
- Standard35 pagesEnglish languagee-Library read for1 day
This document specifies requirements for a valuation of energy related investments (VALERI). It provides a description on how to gather, calculate, evaluate and document information in order to create solid business cases based on Net Present Value calculations for ERIs. The standard is applicable for the valuation of any kind of energy related investment.
The document focusses mainly on the valuation and documentation of the economic impacts of ERIs. However, non-economic effects (e.g. noise reduction) that can occur through undertaking an investment are also considered. Thus, qualitative effects (e.g. impact on the environment) - even if they are non-monetisable - are taken into consideration.
- Standard59 pagesEnglish languagee-Library read for1 day
This document gives guidance to organizations on creating clear, accessible, fair and easy-to-understand online terms and conditions (T&Cs). This document is applicable to drafting business-to-consumer online T&Cs, including websites facilitating consumer-to-consumer sales, such as online auction sites. It does not apply to consumer-to-consumer and business-to-business online T&Cs.
- Standard11 pagesEnglish languagesale 15% off
The purpose of this document is to:
— remind the end-purpose of the development phase (see Clause 5);
— precise the content and outcomes of a development plan (see Clause 6).
This document is a supporting document that supplements EN 9241 regarding the specific aspects to be taken into account in the development plan.
The iteratively realized development plan is consistent with the documents identified in 6.2.2.
This document applies to each level of the product breakdown structure. In particular, it takes into account the customer/supplier relationships.
- Standard14 pagesEnglish languagee-Library read for1 day
This document outlines guidance for the management of internships to enable host organizations to consistently offer and enhance internship experiences aligned with intended learning outcomes.
- Standard16 pagesEnglish languagee-Library read for1 day
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document provides a framework that applies to all resources and specifies how to describe resources. It includes rules governing the way in which descriptions are made.
This document provides principles, rules and structures for specifying the description of any type of resource; it identifies and establishes attributes for specifying properties, resources classes, vocabularies and application profiles and the rules governing their use. The key principles set out in this document are framed in a user-centric context and aim to meet the requirements of multilingual and cultural adaptability from a global perspective.
This document can be used for the specification of metadata describing any type of resource (not only learning resources). This document is information-technology-neutral and defines a set of common approaches.
This document specifies generic properties, generic resource classes and predefined rule sets for content value rules. These generic elements are proposed in such a way that they can be widely reused, thereby promoting interoperability.
This document is applicable to the development of:
— application profiles based on the ISO/IEC 19788 series but not part of it or any other document based on it,
— standards consisting of the description of resources (in a broad sense), whether they belong to the domain of education or to any other domain.
- Standard90 pagesEnglish languagee-Library read for1 day
This document defines terms related to security and resilience topics.
- Standard26 pagesEnglish languagee-Library read for1 day
This document provides guidelines for establishing, maintaining, monitoring and improving infrastructure resilience to help ensure the continuity and robustness of essential services. It supports collaborative decision-making across many stakeholders in diverse organizations. It can be used for engaging stakeholders at all levels responsible for, or having influence on, infrastructure resilience matters. This document is intended to be applicable to all types and sizes of organizations which have a role in infrastructure resilience.
- Standard33 pagesEnglish languagesale 15% off
This document establishes a framework to support stakeholders in supply and value chains to ensure the chain of trustworthiness regarding the properties of their products and production processes. This document provides guidelines to identify information relevant to trustworthiness to be exchanged between supply and value chain stakeholders. It also provides an interoperable data structure that is required for supply and value chain stakeholders to negotiate and exchange information relevant to trustworthiness. The guidelines set out in this document are generic and are intended to be applicable to all organizations and products, regardless of type, size or nature.
- Standard23 pagesEnglish languagesale 15% off
All parts of EN 16931 with a specific focus on CEN/TR 16931-5 (Electronic invoicing - Part 5: Guidelines on the use of sector or country extensions in conjunction with EN 16931-1, methodology to be applied in the real environment).
- Technical report49 pagesEnglish languagee-Library read for1 day
This document describes how trading partners may extend the Core Invoice Model and the related business rules and code lists, to support business cases that are specific to their trading environment, while at the same time maintaining semantic interoperability with the Core Invoice Model.
This document does not define a methodology for creation of a Core Invoice Usage Specification, nor does it describe the detailed process of syntax binding.
- Technical specification38 pagesEnglish languagee-Library read for1 day
This document defines terms related to security and resilience topics.
- Standard26 pagesEnglish languagee-Library read for1 day
This document defines terms related to security and resilience topics.
- Standard16 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
This document specifies qualification of the personnel regarding the tasks to be performed in the context of the maintenance of plant, infrastructure and production systems to fulfil the requirements of the maintenance job.
This document describes the knowledge, skills and competencies required for the qualification of maintenance personnel. These guidelines can be used for training, skills validation of maintenance personal and career planning.
This document covers the following professional roles in the maintenance organization:
— Maintenance Technician Specialist;
— Maintenance Supervisor;
— Maintenance Engineer;
— Maintenance Manager.
These designations can be adapted based on company practices and operational organization. An example of an organizational structure can be seen in Annex A.
This document does not specify the verification criteria nor the specialized training of the personnel, which is related to specific sectors.
NOTE Specialization and profession are the subjects of the training carried out in the relevant sector.
- Standard27 pagesEnglish languagee-Library read for1 day