oSIST prEN ISO 14451-8:2026
(Main)Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO/DIS 14451-8:2026)
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO/DIS 14451-8:2026)
ISO 14451-8:2013 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization.
ISO 14451-8:2013 applies to type tests.
ISO 14451-8:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 8: Anforderungen und Kategorisierung von Anzündern (ISO/DIS 14451-8:2026)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 8: Exigences relatives aux allumeurs et leur classement en catégories (ISO/DIS 14451-8:2026)
L'ISO 14451-8:2013 spécifie les types et l'ordre des essais à réaliser sur les allumeurs et établit les critères d'acceptation correspondants et les règles de classement en catégorie.
Elle est applicable aux essais de type.
Elle n'est pas applicable aux articles contenant des explosifs militaires ou des substances explosives commerciales, à l'exception de la poudre noire ou de la composition lumineuse.
Pirotehnični izdelki - Pirotehnični izdelki za vozila - 8. del: Zahteve in kategorizacija za vžigalno napravo (ISO/DIS 14451-8:2026)
General Information
- Status
- Not Published
- Public Enquiry End Date
- 30-Mar-2026
- Technical Committee
- IEKS - Explosives
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 23-Jan-2026
- Due Date
- 12-Jun-2026
Relations
- Effective Date
- 01-May-2024
Overview
oSIST prEN ISO 14451-8:2026: Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters is a draft international standard developed by CEN and ISO/TC 22/SC 36 (Safety and impact testing). This standard specifies the types and sequence of tests required for vehicle pyrotechnic igniters, along with the acceptance criteria and methods for categorization. Its main objective is to ensure consistent safety, quality, and regulatory compliance for igniters used in automotive applications.
This standard applies specifically to type tests of pyrotechnic igniters for vehicles, such as those used in airbag systems and seatbelt pretensioners. It explicitly excludes articles containing military explosives or commercial blasting agents except for black powder or flash composition.
Key Topics
oSIST prEN ISO 14451-8:2026 covers the following essential areas:
- Test Types and Sequences: Defines a comprehensive set of tests to be performed on igniters, including vibration, temperature, humidity cycling, electrostatic discharge (ESD), igniter function, and sensitivity.
- Documentation and Verification: Outlines minimum documentation requirements and ensures design verification is based on standardized processes.
- Forbidden Substances: Identifies specific hazardous substances (such as arsenic, mercury compounds, polychlorobenzenes, and white phosphorus) that are not permitted in pyrotechnic compositions.
- Disposal Information: Requires safety data sheets to provide clear and compliant disposal guidance.
- Acceptance Criteria: Specifies pass/fail requirements for each test to ensure product reliability and safety in real-world conditions.
- Categorization: Introduces a categorization system:
- P1: For igniters presenting a low hazard (NET Explosive Content ≤ 1g).
- P2: For igniters requiring specialist handling (NET Explosive Content > 1g).
Applications
oSIST prEN ISO 14451-8:2026 is highly relevant for:
- Automotive manufacturers and suppliers developing or testing vehicle pyrotechnic systems (e.g., airbag inflators, pretensioners).
- Test laboratories performing type tests on pyrotechnic igniters for automotive applications.
- Certification bodies verifying conformity of automotive pyrotechnic products with European safety directives.
- Regulatory compliance professionals ensuring adherence to harmonized European Union requirements (per Directive 2013/29/EU).
- Safety and Engineering teams establishing internal specifications for sourcing and integrating pyrotechnic igniters in vehicle platforms.
Implementing this standard helps organizations:
- Ensure pyrotechnic igniters in vehicles meet the latest safety and performance requirements.
- Demonstrate legal compliance, particularly with the EU’s harmonized market requirements.
- Minimize the risk of hazardous materials in automotive supply chains.
- Improve documentation, traceability, and safe handling practices of explosive articles.
Related Standards
For comprehensive conformity, the following companion and related standards should be considered:
- ISO/DIS 14451-1: Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Vocabulary
- ISO/DIS 14451-2: Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 2: Test methods
- ISO 14451 series: Covers additional types of automotive pyrotechnic articles and their specific requirements.
- Directive 2013/29/EU: Lays out the essential safety requirements for placing pyrotechnic articles on the EU market.
By aligning with oSIST prEN ISO 14451-8:2026 and related standards, manufacturers and stakeholders can ensure robust safety, regulatory compliance, and market acceptance for vehicle pyrotechnic igniters.
Get Certified
Connect with accredited certification bodies for this standard

TÜV Rheinland
TÜV Rheinland is a leading international provider of technical services.

TÜV SÜD
TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.
AIAG (Automotive Industry Action Group)
American automotive industry standards and training.
Sponsored listings
Frequently Asked Questions
oSIST prEN ISO 14451-8:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO/DIS 14451-8:2026)". This standard covers: ISO 14451-8:2013 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization. ISO 14451-8:2013 applies to type tests. ISO 14451-8:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.
ISO 14451-8:2013 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization. ISO 14451-8:2013 applies to type tests. ISO 14451-8:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.
oSIST prEN ISO 14451-8:2026 is classified under the following ICS (International Classification for Standards) categories: 43.040.99 - Other road vehicle systems; 71.100.30 - Explosives. Pyrotechnics and fireworks. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN ISO 14451-8:2026 has the following relationships with other standards: It is inter standard links to SIST EN ISO 14451-8:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
oSIST prEN ISO 14451-8:2026 is associated with the following European legislation: EU Directives/Regulations: 2013/29/EU; Standardization Mandates: M/583. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
oSIST prEN ISO 14451-8:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2026
Pirotehnični izdelki - Pirotehnični izdelki za vozila - 8. del: Zahteve in kategorizacija
za vžigalno napravo (ISO/DIS 14451-8:2026)
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and
categorization for igniters (ISO/DIS 14451-8:2026)
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 8:
Anforderungen und Kategorisierung von Anzündern (ISO/DIS 14451-8:2026)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 8: Exigences
relatives aux allumeurs et leur classement en catégories (ISO/DIS 14451-8:2026)
Ta slovenski standard je istoveten z: prEN ISO 14451-8
ICS:
43.040.99 Drugi sistemi za cestna vozila Other road vehicle systems
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 14451-8
ISO/TC 22/SC 36
Pyrotechnic articles — Pyrotechnic
Secretariat: AFNOR
articles for vehicles —
Voting begins on:
Part 8: 2026-01-12
Requirements and categorization
Voting terminates on:
2026-04-06
for igniters
Articles pyrotechniques — Articles pyrotechniques pour
véhicules —
Partie 8: Exigences relatives aux allumeurs et leur classement en
catégories
ICS: 71.100.30; 43.040.80
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 14451-8:2026(en)
DRAFT
ISO/DIS 14451-8:2026(en)
International
Standard
ISO/DIS 14451-8
ISO/TC 22/SC 36
Pyrotechnic articles — Pyrotechnic
Secretariat: AFNOR
articles for vehicles —
Voting begins on:
Part 8:
2026-01-12
Requirements and categorization
Voting terminates on:
2026-04-06
for igniters
Articles pyrotechniques — Articles pyrotechniques pour
véhicules —
Partie 8: Exigences relatives aux allumeurs et leur classement en
catégories
ICS: 71.100.30; 43.040.80
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 14451-8:2026(en)
ii
ISO/DIS 14451-8:2026(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and acceptance criteria . 1
4.1 General .1
4.2 Verification of design and documentation .1
4.2.1 Documentation.1
4.2.2 Forbidden substances .1
4.2.3 Disposal .2
4.3 Vibration and temperature test .2
4.3.1 Requirements .2
4.3.2 Acceptance criteria .2
4.4 Thermal humidity cycling test .2
4.4.1 Requirements .2
4.4.2 Acceptance criteria .2
4.5 Electrostatic discharge (ESD) test .2
4.5.1 Requirements .2
4.5.2 Acceptance criteria .2
4.6 Igniter test .2
4.6.1 Requirements .2
4.6.2 Acceptance criteria .2
4.7 Tank test .2
4.7.1 Requirements .2
4.7.2 Acceptance criteria .2
4.8 Functioning test . .3
4.8.1 Requirements .3
4.8.2 Acceptance criteria .3
4.9 Sensitivity test .3
4.9.1 Requirements .3
4.9.2 Acceptance criteria .3
5 Test matrix for igniters . 3
6 Categorization . 4
6.1 Categories.4
6.2 Acceptance criteria .
...




Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...