EN ISO 17074:2011

SLOVENSKI STANDARD
01-november-2011
1DGRPHãþD
SIST EN 14326:2004
Usnje - Fizikalno in mehansko preskušanje - Ugotavljanje odpornosti proti
horizontalno razpršenemu plamenu (ISO 17074:2006)
Leather - Physical and mechanical tests - Determination of resistance to horizontal
spread of flame (ISO 17074:2006)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Widerstandsfähigkeit gegen die horizontale Ausbreitung von Flammen (ISO 17074:2006)
Cuir - Essais physiques et mécaniques - Détermination de la résistance à la propagation
horizontale de la flamme (ISO 17074:2006)
Ta slovenski standard je istoveten z: EN ISO 17074:2011
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 17074
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2011
ICS 59.140.30 Supersedes EN 14326:2003
English Version
Leather - Physical and mechanical tests - Determination of
resistance to horizontal spread of flame (ISO 17074:2006)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la résistance à la propagation horizontale de la flamme Bestimmung der Widerstandsfähigkeit gegen die
(ISO 17074:2006) horizontale Ausbreitung von Flammen (ISO 17074:2006)
This European Standard was approved by CEN on 18 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17074:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 17074:2006 has been prepared by International Union of Leather Technologists and Chemists
Societies and has been taken over as EN ISO 17074:2011 by Technical Committee CEN/TC 289 “Leather”
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at
the latest by March 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14326:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17074:2006 has been approved by CEN as a EN ISO 17074:2011 without any modification.

INTERNATIONAL ISO
STANDARD 17074
IULTCS/IUP
First edition
2006-09-15
Leather — Physical and mechanical
tests — Determination of resistance to
horizontal spread of flame
Cuir — Essais physiques et mécaniques — Détermination de la
résistance à la propagation horizontale de la flamme

Reference number
ISO 17074:2006(E)
IULTCS/IUP 47:2006(E)
©
ISO 2006
ISO 17074:2006(E)
IULTCS/IUP 47:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 17074:2006(E)
IULTCS/IUP 47:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. Interna
...