97.200 - Equipment for entertainment
ICS 97.200 Details
Equipment for entertainment
Unterhaltungstechnik
Equipements de loisirs
Oprema za razvedrilo
General Information
Frequently Asked Questions
ICS 97.200 is a classification code in the International Classification for Standards (ICS) system. It covers "Equipment for entertainment". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1081 standards classified under ICS 97.200 (Equipment for entertainment). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 97.200 - Equipment for entertainment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies microbiological cleanliness and preservative efficacy requirements for accessible aqueous media in toys.
The requirements in this document apply to all toys that are, contain or are supplied with accessible aqueous materials (e.g. paste, putty, finger paint, liquid or gel).
The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer, in an unopened and undamaged container. This document does not apply to a toy that has been used, has had its packaging opened or is otherwise compromised in a way that would introduce microbiological contamination.
This document does not apply to toys and samples which are post-consumer use, since the microbiological limits are inappropriate given, there is no way to establish what conditions the toys have been subject to before testing.
This document does not apply to:
- materials that are inaccessible during normal use or after reasonably foreseeable abuse;
- food;
- cosmetics;
- components of toys covered by EN 71-13 where;
- the component is in scope of the Cosmetic Products Regulation (i.e. Regulation (EC) No 1223/2009 [13];
- the component comprises only recognized food flavours and food ingredients (see relevant legislation, for example Regulation (EC) No 178/2002 [16] ("general food law"), Regulation (EC) No 1334/2008 [15] (flavours), Regulation (EC) No 1333/2008 [14], Commission Regulation (EU) No 231/2012 [18] (food additives) and Regulation (EU) No 1169/2011 (food information to consumers)[17]);
- experimental sets covered by EN 71-4.
NOTE Play cosmetics, that are only for use on the toy (e.g. makeup products only for a doll), are not excluded.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for toy materials (substances and mixtures) used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
- those classified as dangerous by the EU legislation applying to dangerous substances and dangerous mixtures [5];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This document applies to:
- plaster of Paris (gypsum) moulding sets;
- oven-hardening plasticised PVC modelling clay sets;
- polystyrene granules sets;
- embedding sets;
- adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets;
- slime kits.
- Standard89 pagesEnglish languagee-Library read for1 day
This document gives guidance on the requirements for toys, which can be considered a realistic food imitation, to assist users of EN 71-1:2026.
This document is only to assist users in distinguishing whether a toy product, that imitates food in some way, can be considered a realistic food imitation in accordance with clause 4.28 of that standard.
This document does not aim to address whether a product is a toy or not and does not attempt to identify any hazard associated with a particular toy.
- Technical report42 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for activity toys.
This document also specifies requirements for:
- separately sold accessories for, and components of activity toys;
- separately sold swing elements that are ready for use on or in combination with an activity toy;
- construction packages for activity toys including components used to build activity toys in accordance with a scheduled building instruction.
The scope of this document excludes:
- playground equipment intended for public use dealt with in the EN 1176 series;
- bow-mounted rocking activity toys such as rocking horses and similar toys, which are covered by specific requirements in EN 71-1;
- toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool;
NOTE 1 For information regarding the classification of pools as toys see European Commission guidance document No. 8 on the application of the Directive 2009/48/EC on the safety of toys - Pools [1].
- pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool, without play elements covered e.g. by the EN 16582 series or EN 16927.
NOTE 2 There is an enhanced risk of drowning in pools where the depth of water is in excess of 400 mm.
- toy slides designed to be used in conjunction with domestic in-ground swimming pools;
- trampolines for domestic use dealt with in EN 71-14;
- powered blowers used to continuously inflate inflatable activity toys.
NOTE 3 Powered blowers used to continuously inflate inflatable activity toys are considered to be a household appliance and covered by requirements given in EN 60335-2-80.
See also Clause A.1.
- Draft79 pagesEnglish languagee-Library read for1 day
This document specifies requirements and methods of tests for mechanical and physical properties of toys.
This document applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children.
It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided. For example, soft-filled toys with simple features intended for holding and cuddling are considered as intended for use by children under 36 months.
NOTE Information relating to the age grading and age determination of toys can be found in CEN ISO/TR 8124 8 [22] and the European Commission’s Guidance Documents on the Toy Safety Directive.
This document also specifies requirements for packaging, marking and labelling.
This document does not apply to the following toys:
- automatic playing machines, whether coin operated or not, intended for public use;
- toy vehicles equipped with combustion engines;
- toy steam engines;
- toy slings and toy catapults, supplied without projectiles;
- remote control flying toys incorporating rotor blade(s) which are capable of spinning approximately horizontally, each blade being greater than 175 mm in length, measured from the centre of rotation to the blade tip, and with an overall mass of the flying toy greater than 50 g.
This document does not cover musical instruments, sports equipment or similar items but does include their toy counterparts.
Toy slings and toy catapults supplied with projectiles are covered by this document.
This document does not cover electrical safety aspects of toys which are covered by EN IEC 62115.
Furthermore, it does not cover the following items which, for the purpose of this document, are not considered as toys:
a) decorative objects for festivities and celebrations;
b) products for collectors, provided that the product or its packaging bears a visible and legible indication that it is intended for collectors of 14 years of age and above; examples of this category are:
1) detailed and faithful scale models (see A.2),
2) kits for the assembly of detailed scale models,
3) folk dolls and decorative dolls and other similar articles,
4) historical replicas of toys,
5) reproductions of real fire arms;
c) sports equipment including roller skates, inline skates, and skateboards intended for children with a body mass of more than 20 kg;
d) bicycles with a maximum saddle height of more than 435 mm, measured as the vertical distance from the ground to the top of the seat surface, with the seat in a horizontal position and with the seat pillar set to the minimum insertion mark;
e) scooters and other means of transport designed for sport, or which are intended to be used for travel on public roads or public pathways;
f) electrically-driven vehicles which are intended to be used for travel on public roads, public pathways, or the pavement thereof;
g) aquatic equipment intended to be used in deep water, and swimming learning devices for children, such as swim seats and swimming aids;
h) puzzles with more than 500 pieces;
i) guns and pistols using compressed gas, with the exception of water guns and water pistols;
j) bows for archery over 120 cm long;
k) fireworks, including percussion caps which are not specifically designed for toys;
l) products and games using sharp-pointed missiles, such as sets of darts with metallic points;
m) functional educational products, such as electric ovens, irons or other functional products, as defined in EU Directive 2009/48/EC (Toy Safety Directive) [21], operated at a nominal voltage exceeding 24 V which are sold exclusively for teaching purposes under adult supervision...
- Draft214 pagesEnglish languagee-Library read for1 day
This document specifies microbiological cleanliness and preservative efficacy requirements for accessible aqueous media in toys.
The requirements in this document apply to all toys that are, contain or are supplied with accessible aqueous materials (e.g. paste, putty, finger paint, liquid or gel).
The cleanliness and preservation effectiveness requirements are applicable to a toy as it is initially received by the consumer, in an unopened and undamaged container. This document does not apply to a toy that has been used, has had its packaging opened or is otherwise compromised in a way that would introduce microbiological contamination.
This document does not apply to toys and samples which are post-consumer use, since the microbiological limits are inappropriate given, there is no way to establish what conditions the toys have been subject to before testing.
This document does not apply to:
- materials that are inaccessible during normal use or after reasonably foreseeable abuse;
- food;
- cosmetics;
- components of toys covered by EN 71-13 where;
- the component is in scope of the Cosmetic Products Regulation (i.e. Regulation (EC) No 1223/2009 [13];
- the component comprises only recognized food flavours and food ingredients (see relevant legislation, for example Regulation (EC) No 178/2002 [16] ("general food law"), Regulation (EC) No 1334/2008 [15] (flavours), Regulation (EC) No 1333/2008 [14], Commission Regulation (EU) No 231/2012 [18] (food additives) and Regulation (EU) No 1169/2011 (food information to consumers)[17]);
- experimental sets covered by EN 71-4.
NOTE Play cosmetics, that are only for use on the toy (e.g. makeup products only for a doll), are not excluded.
- Standard18 pagesEnglish languagee-Library read for1 day
This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.
NOTE EN 71-3 and EN 71-12 specify requirements and test methods for finger paints for the migration of certain elements (see Clause F.4) and N-nitrosamines (see Clause F.9).
- Standard73 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for toy trampolines for domestic use, their access devices and their enclosures, intended for outdoor and/or indoor use by one person at a time.
The scope of this document excludes:
— inclined mat toy trampolines;
— inflatable toy trampolines;
— toy trampolines with additional features, e.g. tents, basketball hoop.
NOTE The document also does not apply to non-toy products such as
— floating inflatable trampolines, covered by the EN ISO 25649 series;
— trampolines used as gymnastic equipment, covered by EN 13219;
— fitness trampolines, including trampolines for medical use;
— trampolines used in public playgrounds, e.g. bouncing facilities according to EN 1176-1.
- Standard45 pagesEnglish languagee-Library read for1 day
This Technical Report provides information on the migration behaviour of certain elements from polymers in order to assist e. g. manufacturers of toys in performing risk assessments.
- Technical report24 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for toy materials (substances and mixtures) used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
- those classified as dangerous by the EU legislation applying to dangerous substances and dangerous mixtures [5];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This document applies to:
- plaster of Paris (gypsum) moulding sets;
- oven-hardening plasticised PVC modelling clay sets;
- polystyrene granules sets;
- embedding sets;
- adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets;
- slime kits.
- Standard89 pagesEnglish languagee-Library read for1 day
This document defines markers of harm in online gambling. It is a minimum set of markers to analyse. The individual indicators can be analysed over additional time spans as well as in excess of those re-quired, and other markers can be added to the analysis as well.
In the event that the collection or analysis of data for a limited set of markers is prohibited within a spe-cific jurisdiction (for example, where legislation prevents it), operators can still be compliant with the standard provided that only these markers are omitted, and only for players who fall under that specific jurisdiction.
This document does not provide guidelines regarding the interventions to be employed when addressing individuals with gambling issues, nor does it establish predefined thresholds for intervention.
- Standard19 pagesEnglish languagee-Library read for1 day
This proposed TR gives guidance on the requirement for toys which may be a realistic food imitation under the meaning of the prEN 71-1 clause 4.28, in order to assist users of the EN 71-1 standard.
This document is only to assist users in distinguishing whether a toy product that imitates food in some way should be considered a realistic food imitation. It does not address products that are not toys.
- Technical report42 pagesEnglish languagee-Library read for1 day
This document defines markers of harm in online gambling. It is a minimum set of markers to analyse. The individual indicators can be analysed over additional time spans as well as in excess of those re-quired, and other markers can be added to the analysis as well.
In the event that the collection or analysis of data for a limited set of markers is prohibited within a spe-cific jurisdiction (for example, where legislation prevents it), operators can still be compliant with the standard provided that only these markers are omitted, and only for players who fall under that specific jurisdiction.
This document does not provide guidelines regarding the interventions to be employed when addressing individuals with gambling issues, nor does it establish predefined thresholds for intervention.
- Standard19 pagesEnglish languagee-Library read for1 day
This Technical Report provides information on the migration behaviour of certain elements from polymers in order to assist e. g. manufacturers of toys in performing risk assessments.
- Technical report24 pagesEnglish languagee-Library read for1 day
This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.
NOTE EN 71-3 and EN 71-12 specify requirements and test methods for finger paints for the migration of certain elements (see Clause F.4) and N-nitrosamines (see Clause F.9).
- Standard73 pagesEnglish languagee-Library read for1 day
- Standard2 pagesEnglish and French languagesale 15% off
This document specifies requirements and test methods for toy trampolines for domestic use, their access devices and their enclosures, intended for outdoor and/or indoor use by one person at a time.
The scope of this document excludes:
- trampolines used as gymnastic equipment, covered by EN 13219:2008;
- floating inflatable trampolines, covered by the EN ISO 25649:2017 series;
- trampolines used in public playgrounds;
- inclined mat trampolines;
- inflatable trampolines;
- fitness trampolines, including trampolines for medical use;
- trampolines with additional features, e.g. tents, basketball hoop.
- Standard45 pagesEnglish languagee-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
The content of the corrigendum 1 (2025-10) has been included in this copy.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
IEC 62115:2017 specifies safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age.
Examples of electric toys also within the scope of this standard are:
- constructional sets;
- experimental sets;
- functional electric toys (an electric toy that performs and is used in the same way as a product, appliance or installation intended for use by adults, and which may be a scale model of such product, appliance or installation);
- electric toy computers as well as a doll's house having an interior lamp.
If the packaging is intended to have play value then it is considered to be part of the electric toy.
This International Standard only covers the safety aspects of electric toys that relate to an electrical function.
This standard covers the safety of electric toys taking power from any source, such as batteries, transformers, solar cells and inductive connections.
This second edition cancels and replaces the first edition published in 2003, Amendment 1 (2004) and Amendment 2 (2010). This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- the general conditions for tests has been rewritten and modified (Clause 5);
- the criteria for reduced testing has been modified (Clause 6);
- warnings for toys using button batteries or coin batteries have been added (7.3.3.2, 7.3.3.3);
- warnings on ride-on toys have been added (7.5);
- the requirements concerning accessibility of batteries have been updated (13.4.1 and 13.4.2);
- added requirements to cover toys placed above a child (13.4.4);
- added requirements to cover toys connected to other equipment (13.9);
- modified the requirements for safety of toys incorporating optical radiation sources (Annex E), to include requirements for using the technical LED data sheet for checking compliance with the specified accessible emission limits (AEL);
- updated the details for measurements of the optical radiation from the toy (Annex E);
- introduced an informative Annex I concerning measurement methods for toys with an integrated field source generating EMF;
- included a normative Annex J concerning safety of remote-controls for electric ride-on toys.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication.
Key words: Safety, Electric Toys
The contents of the corrigendum of August 2019 apply to the French text only.
- Standard201 pagesEnglish languagesale 15% off
- Standard198 pagesEnglish and French languagesale 15% off
This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards: a) ISO: ISO 8124-1:2022; b) Europe (CEN): EN 71-1:2014+A1:2018; c) USA: ASTM F963-23.
- Technical report123 pagesEnglish languagesale 15% off
This document specifies requirements (content limit) and a test method for certain flame retardants in toy materials.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements and a test method for migration of bisphenol A from toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for determining the concentration of phenol in aqueous toy materials and for migration of phenol from polymeric toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [4] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies requirements (content limit) and a test method for isothiazolinones in aqueous toy materials.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements for formamide in foam toy materials and a test method for determining the content of formamide in foam toy materials. This document is applicable to toys intended for use by children under 36 month or other toys intended to be placed in the mouth.
NOTE 1 The document provides a test method to determine if the total content of formamide in foam toy materials is below the 200 mg/kg cut-off limit. Foam toy materials exceeding this limit are subject to the emission limit specified in Appendix C to Annex II to Directive 2009/48/EC.
NOTE 2 The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard14 pagesEnglish languagee-Library read for1 day
This document provides an indication of the lowest age at which children start playing with toys in specific toy sub-categories. It is primarily directed to manufacturers and agencies that evaluate the compliance of toys with safety standards.
This document can be used as a reference to determine the appropriateness of toys by earliest age, for use by distributors, institutions and organizations involved with child play, as well as by paediatric institutions, teachers, other professionals that use toys in their routine activities, and consumers.
The age at which children develop different abilities is unique for each individual child. This document illustrates the age ranges during which a typical child has developed certain abilities.
Although age grading has safety implications, this document is not intended to address specific safety requirements. Specific safety requirements for toys (e.g. restriction of the presence of small parts and small balls in toys intended for certain age groups, due to the choking hazard) can be found in the ISO 8124 series and in other regional toy safety standards and regulations.
- Technical report38 pagesEnglish languagee-Library read for1 day
This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.
- Standard35 pagesEnglish languagee-Library read for1 day
This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
- toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
- toy disguise costumes and toys intended to be worn by a child in play;
- toys intended to be entered by a child;
- soft-filled toys.
NOTE Additional requirements for flammability of electric toys are specified in EN IEC 62115.
- Standard40 pagesEnglish languagee-Library read for1 day
This European Standard specifies the categories of flammable materials which are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
This European Standard includes general requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard:
- toys to be worn on the head: beards, moustaches, wigs, etc. made from hair, pile or material with similar features; masks; hoods, head-dresses, etc.; flowing elements of toys to be worn on the head, but excluding paper novelty hats of the type usually supplied in party crackers;
- toy disguise costumes and toys intended to be worn by a child in play;
- toys intended to be entered by a child;
- soft-filled toys.
NOTE Additional requirements for flammability of electric toys are specified in EN IEC 62115.
- Standard40 pagesEnglish languagee-Library read for1 day
This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].
- Standard31 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1 See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
- Category I: Dry, brittle, powder like or pliable materials;
- Category II: Liquid or sticky materials;
- Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2 For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
- All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
- All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).
- Standard62 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for activity toys for indoor and outdoor domestic family use intended for children under 14 years to play on or in. Products covered by this document include swings, slides, see-saws, carousels, rocking toys, climbing frames, toddler swing seats and other products often intended to bear the mass of one or more children. Products not included within the scope of this document are: a) fitness and sporting equipment unless attached to the activity toy; b) equipment intended for use in schools, daycare centres, kindergartens, public playgrounds, restaurants, shopping centres and similar public places; c) juvenile care products such as, but not limited to, infant swings, playpens/enclosures, beds or furniture including picnic tables, cradle rockers and products specifically designed for therapeutic use; d) pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool. Inflatable activity toys are included in the scope of this document. However, a powered blower used to continuously inflate the toy is not covered by this document. Such equipment is considered to be a household appliance and is covered by requirements given in IEC 60335-2-80.[ REF Reference_ref_8 \r \h 5 08D0C9EA79F9BACE118C8200AA004BA90B0200000008000000100000005200650066006500720065006E00630065005F007200650066005F0038000000 ]
- Standard77 pagesEnglish languagesale 15% off
This European Standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are: amusement machines; tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pinball machines; video games; personal service machines; card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons
- Amendment4 pagesEnglish languagee-Library read for1 day
This European Standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Examples of appliances that are within the scope of this standard are: amusement machines; tables; bowling machines; dartboards; driving simulators; gaming machines; kiddie rides; laser shooting appliances; pinball machines; video games; personal service machines; card re-value machines; currency dispensers; luggage lockers; weighing machines; shoe shining appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons
- Amendment4 pagesEnglish languagee-Library read for1 day
IEC 61558-2-7:2023 is available as IEC 61558-2-7:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61558-2-7:2023 deals with the safety of transformers for toys and power supply units incorporating transformers for toys. Transformers for toys incorporating electronic circuits are also covered by this document. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) adjustment of structure and references in accordance with IEC 61558-1:2017;
b) new symbol for power supply unit with linearly regulated output voltage.
It has the status of a group safety publication in accordance with IEC Guide 104.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements for inflatable bungee runs in addition to the requirements of EN 14960-1.
This document is applicable to inflatable bungee runs intended for use by persons of 1 200 mm minimum height and 120 kg maximum weight/mass.
This document specifies safety requirements for an inflatable game on which the activity is pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of the inflatable game.
This document specifies the requirements that will protect the user from hazards that they are unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not pulling horizontally against a secured bungee shock cord.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.
- Standard35 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements for inflatable bungee runs in addition to the requirements of EN 14960-1.
This document is applicable to inflatable bungee runs intended for use by persons of 1 200 mm minimum height and 120 kg maximum weight/mass.
This document specifies safety requirements for an inflatable game on which the activity is pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of the inflatable game.
This document specifies the requirements that will protect the user from hazards that they are unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not pulling horizontally against a secured bungee shock cord.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1 See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
- Category I: Dry, brittle, powder like or pliable materials;
- Category II: Liquid or sticky materials;
- Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2 For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
- All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
- All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).
- Standard62 pagesEnglish languagee-Library read for1 day
This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
- those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
- substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
- any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].
- Standard31 pagesEnglish languagee-Library read for1 day
The purpose of this document is to publish replies to requests for interpretations to all parts of EN 1176 which have been drafted by the interpretation panel and confirmed by CEN/TC 136/SC 1.
- Technical report34 pagesEnglish languagee-Library read for1 day
This document provides an indication of the lowest age at which children start playing with toys in specific toy sub-categories. It is primarily directed to manufacturers and agencies that evaluate the compliance of toys with safety standards.
This document can be used as a reference to determine the appropriateness of toys by earliest age, for use by distributors, institutions and organizations involved with child play, as well as by paediatric institutions, teachers, other professionals that use toys in their routine activities, and consumers.
The age at which children develop different abilities is unique for each individual child. This document illustrates the age ranges during which a typical child has developed certain abilities.
Although age grading has safety implications, this document is not intended to address specific safety requirements. Specific safety requirements for toys (e.g. restriction of the presence of small parts and small balls in toys intended for certain age groups, due to the choking hazard) can be found in the ISO 8124 series and in other regional toy safety standards and regulations.
- Technical report38 pagesEnglish languagee-Library read for1 day
IEC 60335-2-82:2024 deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances.
Examples of appliances that are within the scope of this standard are
– amusement machines: billiard tables, bowling machines, dartboards, driving simulators, gaming machines, kiddie rides, laser shooting appliances, pinball machines, video games
– personal service machines: card re-value machines, currency dispensers, luggage lockers, weighing machines, shoe shining appliances.
As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;
– in many countries, additional requirements are specified by the national authorities responsible for health, for the protection of labour and similar authorities.
This standard does not apply to
– appliances intended exclusively for household use;
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
– appliances for washing cars;
– dispensing appliances and vending machines (IEC 60335-2-75);
– appliances within the scope of IEC 62368-1, such as jukeboxes, household video games copying machines, ticket machines and automatic teller machines;
– appliances intended to be used when a trained attendant is present, such as virtual reality systems;
– equipment intended exclusively for fairgrounds, such as carousels;
– self-balancing personal transport devices (IEC 60335-2-114).
This fourth edition cancels and replaces the third edition published in 2017 and Amendment 1:2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with IEC 60335-1:2020;
b) conversion of some notes to normative text (Clause 1, 19.2, 19.101, 22.104);
c) introduction of test probe 18 (22.101);
d) introduction of test probe 19 (8.1.1, 20.2);
e) addition of surface temperature rise limits (11.3, 11.8, Table 101).
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
- Standard85 pagesEnglish languagesale 15% off
- Standard273 pagesEnglish languagesale 15% off
- Standard55 pagesEnglish and French languagesale 15% off
This document provides an indication of the lowest age at which children start playing with toys in specific toy sub-categories. It is primarily directed to manufacturers and agencies that evaluate the compliance of toys with safety standards. This document can be used as a reference to determine the appropriateness of toys by earliest age, for use by distributors, institutions and organizations involved with child play, as well as by paediatric institutions, teachers, other professionals that use toys in their routine activities, and consumers. The age at which children develop different abilities is unique for each individual child. This document illustrates the age ranges during which a typical child has developed certain abilities. Although age grading has safety implications, this document is not intended to address specific safety requirements. Specific safety requirements for toys (e.g. restriction of the presence of small parts and small balls in toys intended for certain age groups, due to the choking hazard) can be found in the ISO 8124 series and in other regional toy safety standards and regulations.
- Technical report30 pagesEnglish languagesale 15% off
The purpose of this document is to publish replies to requests for interpretations to all parts of EN 1176 which have been drafted by the interpretation panel and confirmed by CEN/TC 136/SC 1.
- Technical report34 pagesEnglish languagee-Library read for1 day
This part of EN 13814 defines requirements for the necessary independent inspections of amusement devices designed, manufactured, operated and used according to EN 13814 1:2019 and EN 13814 2:2019.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
For all the equipment not covered by the requirements of EN 13814 1, the relevant standards apply.
Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein.
In terms of workers’ health and safety, national regulations apply.
This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.
- Standard178 pagesEnglish languagee-Library read for1 day
This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations.
Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
In terms of workers’ health and safety, national regulations apply.
- Standard37 pagesEnglish languagee-Library read for1 day