97.190 - Equipment for children
ICS 97.190 Details
Equipment for children
Gerate fur Kinder
Équipements pour les enfants
Otroška oprema
General Information
Frequently Asked Questions
ICS 97.190 is a classification code in the International Classification for Standards (ICS) system. It covers "Equipment for children". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 783 standards classified under ICS 97.190 (Equipment for children). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 97.190 - Equipment for children
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies requirements for the safety of children's sleep bags which are used in the children's sleeping environment (i.e. not under supervision) and designed to provide sufficient warmth so as to remove the need for additional bedding when sleeping in a cot or similar product (e.g. crib/cradle) in which a child is contained. It is applicable to products for use by children up to the age of 24 months.
NOTE Requirements of this document are not relevant when sleep bags are used for children over the age of 24 months or when they have the ability to climb out of a cot or sleep in a bed.
This document does not apply to products
- designed for use during the care of premature children, or
- designed for children of low birthweight (i.e. lower than 2,5 kg - see B.1), or
- designed for medical settings or for children with special medical needs (see B.1), or
- for outdoor use or to products designed to keep a child warm in a pushchair (e.g. foot muff) (see B.1), or
- for use in a car restraint system for children (see B.1).
If a part of the children's sleep bag is designed to offer additional function (e.g. play function, swaddling functions), this part will, in addition to the following requirements, be subjected to safety requirements related to relevant standards (see B.1).
- Standard56 pagesEnglish languagee-Library read for1 day
This document establishes good practices for drafting product information requirements in standards related to child care articles. Annex A provides rationales for these requirements.
- Technical specification7 pagesEnglish languagesale 15% off
This document specifies safety requirements and test methods for learning towers for domestic use that are intended to raise children to allow them to carry out tasks on kitchen worktops, bathroom sinks, etc. in a standing position.
If the learning tower has additional functions or can be converted into other products, the relevant European Standards may apply.
- Draft34 pagesEnglish languagee-Library read for1 day
This document specifies requirements for the safety of children's sleep bags which are used in the children's sleeping environment (i.e. not under supervision) and designed to provide sufficient warmth so as to remove the need for additional bedding when sleeping in a cot or similar product (e.g. crib/cradle) in which a child is contained. It is applicable to products for use by children up to the age of 24 months.
NOTE Requirements of this document are not relevant when sleep bags are used for children over the age of 24 months or when they have the ability to climb out of a cot or sleep in a bed.
This document does not apply to products
- designed for use during the care of premature children, or
- designed for children of low birthweight (i.e. lower than 2,5 kg - see B.1), or
- designed for medical settings or for children with special medical needs (see B.1), or
- for outdoor use or to products designed to keep a child warm in a pushchair (e.g. foot muff) (see B.1), or
- for use in a car restraint system for children (see B.1).
If a part of the children's sleep bag is designed to offer additional function (e.g. play function, swaddling functions), this part will, in addition to the following requirements, be subjected to safety requirements related to relevant standards (see B.1).
- Standard56 pagesEnglish languagee-Library read for1 day
This document establishes principles for the classification of child care articles based on chemical hazards, behavioural habits, physiological characteristics, exposure routes and chemical risk assessment methods related to classification. It specifies general and fundamental chemical requirements applicable to all child care articles. It also describes the relationship between this document and specific product standards. NOTE 1 Chemical hazards that are unique to specific product categories of child care articles are addressed in corresponding product standards. NOTE 2 There are many child care articles, and many materials and chemical substances are used. This document cannot cover all child care articles and all chemical hazardous substances, which is why this document also gives principles for dealing with unknown products and chemical substances.
- Technical specification35 pagesEnglish languagesale 15% off
This document specifies safety requirements and test methods for changing units, changing pads and changing unit accessories for domestic use.
This document only covers the function of the item as a changing unit. If the item can be converted or used for another function (e.g. cots, storage furniture, bath tubs and stands, etc.), other relevant European Standards apply.
The changing unit can be foldable and can be fitted with a child bathtub or other additional items.
- Standard47 pagesEnglish languagee-Library read for1 day
- Standard47 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements and test methods for changing units, changing pads and changing unit accessories for domestic use.
This document only covers the function of the item as a changing unit. If the item can be converted or used for another function (e.g. cots, storage furniture, bath tubs and stands, etc.), other relevant European Standards apply.
The changing unit can be foldable and can be fitted with a child bathtub or other additional items.
- Standard47 pagesEnglish languagee-Library read for1 day
- Standard47 pagesEnglish languagee-Library read for1 day
This document specifies chemical product safety requirements and reference test methods for the following child care articles:
— Safety barriers
— Bedguards
— Baby carriers and child carriers
— Pushchairs and prams
— Carry cots, baby nests and carry cot stands
— Bath tubs and bathing aids
— Reclined cradles and infant swings
— Chair mounted seats
— Table mounted chairs
— Childs seats for bicycle
— Baby bouncers
— Children's harnesses and reins
— Baby walking frames
— Changing units
See also Clause A.1.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies requirements and gives guidance on thermal hazards for developing safety standards for child care articles.
- Technical specification5 pagesEnglish languagesale 15% off
This document contains the general safety philosophy and a guideline on safety assessment that experts are recommended to use when drafting standards.
It also contains an Annex A with a collection of available anthropometric data and details of the abilities of children from birth to 48 months of age.
The general safety philosophy given in this part is based on the principle that child care articles should be designed to be safe.
Children with special needs have not been taken into account while drafting these guidelines. ISO/IEC Guide 71 can be consulted to ascertain any further requirements to address the hazards and risks associated with children with special needs.
These guidelines do not cover all types of hazards and risks, such as inappropriate use of products, inadequate supervision of children and products used in a non-domestic situation.
Attention is drawn to the importance of ensuring that all other potential hazards relevant to the product are fully addressed, e.g. hygiene, the effects of electrical power etc., where other safety standards can apply.
- Technical specification37 pagesEnglish languagee-Library read for1 day
This document is meant to introduce good practices for drafting product information requirements in standards related to childcare products.
This document provides guidance information on common hazards that is taken into consideration when developing safety standards for childcare articles.
This new edition of this document is a hazard based Technical Specification.
NOTE See A.1.
- Technical specification13 pagesEnglish languagee-Library read for1 day
This document provides guidance information on chemical hazards that are taken into consideration when developing safety standards for child care articles. In addition, these guidelines can assist those with a general professional interest in child safety.
- Technical specification44 pagesEnglish languagee-Library read for1 day
This document provides guidance information on thermal hazards that are taken into consideration when developing safety standards for child care articles. In addition, these guidelines can assist those with a general professional interest in child safety.
- Technical specification8 pagesEnglish languagee-Library read for1 day
This document provides guidance information on mechanical hazards that are taken into consideration when developing safety standards for child care articles. In addition, these guidelines can assist those with a general professional interest in child safety.
This new edition of this document is a hazard based Technical Specification.
- Technical specification66 pagesEnglish languagee-Library read for1 day
This document specifies chemical product safety requirements and reference test methods for the following child care articles:
— Safety barriers
— Bedguards
— Baby carriers and child carriers
— Pushchairs and prams
— Carry cots, baby nests and carry cot stands
— Bath tubs and bathing aids
— Reclined cradles and infant swings
— Chair mounted seats
— Table mounted chairs
— Childs seats for bicycle
— Baby bouncers
— Children's harnesses and reins
— Baby walking frames
— Changing units
See also Clause A.1.
- Standard17 pagesEnglish languagee-Library read for1 day
This document provides guidance information on chemical hazards that are taken into consideration when developing safety standards for child care articles. In addition, these guidelines can assist those with a general professional interest in child safety.
- Technical specification44 pagesEnglish languagee-Library read for1 day
This document provides guidance information on mechanical hazards that are taken into consideration when developing safety standards for child care articles. In addition, these guidelines can assist those with a general professional interest in child safety.
This new edition of this document is a hazard based Technical Specification.
- Technical specification66 pagesEnglish languagee-Library read for1 day
This document provides guidance information on thermal hazards that are taken into consideration when developing safety standards for child care articles. In addition, these guidelines can assist those with a general professional interest in child safety.
- Technical specification8 pagesEnglish languagee-Library read for1 day
This document contains the general safety philosophy and a guideline on safety assessment that experts are recommended to use when drafting standards.
It also contains an Annex A with a collection of available anthropometric data and details of the abilities of children from birth to 48 months of age.
The general safety philosophy given in this part is based on the principle that child care articles should be designed to be safe.
Children with special needs have not been taken into account while drafting these guidelines. ISO/IEC Guide 71 can be consulted to ascertain any further requirements to address the hazards and risks associated with children with special needs.
These guidelines do not cover all types of hazards and risks, such as inappropriate use of products, inadequate supervision of children and products used in a non-domestic situation.
Attention is drawn to the importance of ensuring that all other potential hazards relevant to the product are fully addressed, e.g. hygiene, the effects of electrical power etc., where other safety standards can apply.
- Technical specification37 pagesEnglish languagee-Library read for1 day
This document is meant to introduce good practices for drafting product information requirements in standards related to childcare products.
This document provides guidance information on common hazards that is taken into consideration when developing safety standards for childcare articles.
This new edition of this document is a hazard based Technical Specification.
NOTE See A.1.
- Technical specification13 pagesEnglish languagee-Library read for1 day
This document specifies requirements and gives guidance on mechanical hazards for developing safety standards for child care articles which are intended for children from birth to 48 months.
- Technical specification53 pagesEnglish languagesale 15% off
This document specifies safety requirements and test methods for baby walking frames into which a child is placed, and which are intended to be used from when the child is able to sit up unaided (around six months), until the child is able to walk independently or weighs more than 12 kg. This document does not apply to: — baby walking frames: — for therapeutic and curative purposes; — that rely on inflatable parts to support the child; — toys (e.g. ride on toys and push-along toys usually intended for children able to walk unaided). If a baby walking frame has several functions or can be converted into another function, then the relevant International Standards apply to it. For example, if a baby walking frame is equipped with toys, the requirements of the ISO 8124 series apply to the toys.
- Standard39 pagesEnglish languagesale 15% off
This document specifies requirements and a test method for migration of bisphenol A from toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements for formamide in foam toy materials and a test method for determining the content of formamide in foam toy materials. This document is applicable to toys intended for use by children under 36 month or other toys intended to be placed in the mouth.
NOTE 1 The document provides a test method to determine if the total content of formamide in foam toy materials is below the 200 mg/kg cut-off limit. Foam toy materials exceeding this limit are subject to the emission limit specified in Appendix C to Annex II to Directive 2009/48/EC.
NOTE 2 The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for determining the concentration of phenol in aqueous toy materials and for migration of phenol from polymeric toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [4] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies requirements (content limit) and a test method for certain flame retardants in toy materials.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements (content limit) and a test method for isothiazolinones in aqueous toy materials.
- Standard16 pagesEnglish languagee-Library read for1 day
This Technical Report specifiesthe safety requirements and test methods applicable for tricyclelike vehicles providing a transportation function.
When a product includes some combination of the belowpushchairfeatures this leads to consider a tricycle offers a transportationfunction
-A minimum height of the backrest of 340 mm -(a high backrest for the child)
-A harness for the child, bumper bar
-Possibility to disengage child steering
-Possibility to semi-recline or recline the child’s seat
-Padded seat
-Reversible child’s seat
-Possibility is provided to affix bags, backpacks and other accessories,
-Footrest
NOTE: A learner tricycle, unlike a convertible tricycle stroller, has basic features such as a —
(a)handle for parental control and assistance;
(b)handlebar for use by the child tolearn to steer with the pedals disengaged; and
(c)waist and crotch harness on a seathaving a low back support;
- Technical specification49 pagesEnglish languagee-Library read for1 day
This document specifies the safety requirements of pushchairs when used for running/jogging or skating (excluding ice skating), intended for the transport of one or two children up to 15 or 22 kg each.
Pushchairs intended to transport the carer while pushing (e.g. the combination of longboard and stroller) are excluded from the scope of this document.
This document applies in conjunction with and in addition to the European standards EN 1888 1:2018+A1:2022 or EN 1888-2:2018+A1:2022 and it cannot be used separately.
If the product has several functions or can be converted into another function, the relevant European standards apply to it.
- Standard28 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements relating to materials, construction, performance, packaging and labelling of soother holders.
NOTE 1 See B.1.
It includes test methods for the mechanical and chemical requirements specified.
This document covers products for children from birth to 36 months of age, alike the soothers to which these items are connected to.
This document is intended to provide safety requirements for soother holders. All products that allow the attachment of a soother intended for babies and young children to any other object are included in the scope. The soother holder has a holding device at one end for the soother, a garment fastener that attaches to any other product, e.g. the child’s garment and a connecting device linking these parts. The safety requirements of products that a soother holder attaches to are not considered in this standard.
Where a soother holder is considered to have significant play value, the soother holder is expected to meet the safety requirements for toys as stated in the Toy Directive 2009/48/EC [6] in addition to those in this document.
NOTE 2 See B.2.
- Standard60 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements for inflatable bungee runs in addition to the requirements of EN 14960-1.
This document is applicable to inflatable bungee runs intended for use by persons of 1 200 mm minimum height and 120 kg maximum weight/mass.
This document specifies safety requirements for an inflatable game on which the activity is pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of the inflatable game.
This document specifies the requirements that will protect the user from hazards that they are unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not pulling horizontally against a secured bungee shock cord.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements relating to materials, construction, performance, packaging and labelling of soother holders.
NOTE 1 See B.1.
It includes test methods for the mechanical and chemical requirements specified.
This document covers products for children from birth to 36 months of age, alike the soothers to which these items are connected to.
This document is intended to provide safety requirements for soother holders. All products that allow the attachment of a soother intended for babies and young children to any other object are included in the scope. The soother holder has a holding device at one end for the soother, a garment fastener that attaches to any other product, e.g. the child’s garment and a connecting device linking these parts. The safety requirements of products that a soother holder attaches to are not considered in this standard.
Where a soother holder is considered to have significant play value, the soother holder is expected to meet the safety requirements for toys as stated in the Toy Directive 2009/48/EC [6] in addition to those in this document.
NOTE 2 See B.2.
- Standard60 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements for inflatable bungee runs in addition to the requirements of EN 14960-1.
This document is applicable to inflatable bungee runs intended for use by persons of 1 200 mm minimum height and 120 kg maximum weight/mass.
This document specifies safety requirements for an inflatable game on which the activity is pulling horizontally against a secured bungee shock cord. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of the inflatable game.
This document specifies the requirements that will protect the user from hazards that they are unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
This document is not applicable to inflatable water- borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not pulling horizontally against a secured bungee shock cord.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies requirements (content limit) and a test method for isothiazolinones in aqueous toy materials.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements (content limit) and a test method for certain flame retardants in toy materials.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements for formamide in foam toy materials and a test method for determining the content of formamide in foam toy materials. This document is applicable to toys intended for use by children under 36 month or other toys intended to be placed in the mouth.
NOTE 1 The document provides a test method to determine if the total content of formamide in foam toy materials is below the 200 mg/kg cut-off limit. Foam toy materials exceeding this limit are subject to the emission limit specified in Appendix C to Annex II to Directive 2009/48/EC.
NOTE 2 The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies requirements and a test method for migration of bisphenol A from toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard16 pagesEnglish languagee-Library read for1 day
Gathering the responses to the various interpretation requests received over the years into a single document to be referred to.
- Technical report16 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for determining the concentration of phenol in aqueous toy materials and for migration of phenol from polymeric toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [4] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.
- Standard19 pagesEnglish languagee-Library read for1 day
Gathering the responses to the various interpretation requests received over the years into a single document to be referred to.
- Technical report16 pagesEnglish languagee-Library read for1 day
This European Standard specifies safety requirements for free standing children's high chairs that elevate children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided.
With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use.
NOTE If a children's high chair has to or can be converted into other functions, additional European Standards may apply.
- Standard50 pagesEnglish languagee-Library read for1 day
This Technical Report specifiesthe safety requirements and test methods applicable for tricyclelike vehicles providing a transportation function.
When a product includes some combination of the belowpushchairfeatures this leads to consider a tricycle offers a transportationfunction
-A minimum height of the backrest of 340 mm -(a high backrest for the child)
-A harness for the child, bumper bar
-Possibility to disengage child steering
-Possibility to semi-recline or recline the child’s seat
-Padded seat
-Reversible child’s seat
-Possibility is provided to affix bags, backpacks and other accessories,
-Footrest
NOTE: A learner tricycle, unlike a convertible tricycle stroller, has basic features such as a —
(a)handle for parental control and assistance;
(b)handlebar for use by the child tolearn to steer with the pedals disengaged; and
(c)waist and crotch harness on a seathaving a low back support;
- Technical specification49 pagesEnglish languagee-Library read for1 day
This document specifies the safety requirements of pushchairs when used for running/jogging or skating (excluding ice skating), intended for the transport of one or two children up to 15 or 22 kg each.
Pushchairs intended to transport the carer while pushing (e.g. the combination of longboard and stroller) are excluded from the scope of this document.
This document applies in conjunction with and in addition to the European standards EN 1888 1:2018+A1:2022 or EN 1888-2:2018+A1:2022 and it cannot be used separately.
If the product has several functions or can be converted into another function, the relevant European standards apply to it.
- Standard28 pagesEnglish languagee-Library read for1 day
This European Standard specifies the safety requirements and test methods for pushchairs and prams, designed for the carriage of one or more children, up to 15 kg each and up to 20 kg for any integrated platform on which a child can stand.
This European Standard does not cover toys, baby carriers fitted with wheels; pushchairs and prams propelled by a motor and pushchairs and prams designed for children with special needs.
Where a pushchair or pram or any part of the pushchair or pram has several functions or can be converted into another function it is due to comply with relevant standard(s).
- Standard + National Annex and/or Foreword115 pagesForeword and/or annex in Slovenian language, body of the standard in English languagee-Library read for1 day
This document specifies requirements for child seats intended to be mounted on cycles and electrical power assisted cycles with a cut off speed of up to 25 km/h (i.e. according to EN 15194), their attachment system and accessories intended to be attached to the seat in order to transport children with a weight from 9 kg up to 22 kg and who are capable of sitting unaided.
NOTE 1 Some European countries have special legislation for child seats for cycles. Compliance with this document might not meet this legislation.
NOTE 2 Where a child seat or any part of the child seat has several functions or can be converted into another function, other relevant standards might be applicable.
NOTE 3 Additional rationales are presented in Annex E for inclusion of some of the requirements given in this document.
- Standard + National Annex and/or Foreword83 pagesForeword and/or annex in Slovenian language, body of the standard in English languagee-Library read for1 day
- Draft74 pagesEnglish languagee-Library read for1 day
This European Standard specifies safety requirements and the corresponding test methods for infant swings intended for children up
to a weight of 9 kg or unable to sit up unaided.
If an infant swing has several functions or can be converted into another function, the relevant European Standards apply to it.
Swings falling under the scope of EN 71-8 are excluded from the scope of this European Standard.
- Standard + National Annex and/or Foreword69 pagesForeword and/or annex in Slovenian language, body of the standard in English languagee-Library read for1 day
This document specifies the safety requirements and test methods for child back carriers with framed support to carry a child in a seated position. Framed back carriers are intended for children from 6 months of age up to a maximum weight of 18 kg and are designed to carry the child on the carer’s back and be attached to a carer’s torso allowing a hands-free operation, e.g. standing, walking.
NOTE The rationales for the inclusion of some of the requirements given in this document are given in Annex B.
This document does not cover framed back carriers designed for children with special needs.
If the framed back carrier has other functions not covered in this document, reference should be made to the relevant European Standard.
- Standard + National Annex and/or Foreword30 pagesForeword and/or annex in Slovenian language, body of the standard in English languagee-Library read for1 day
This document specifies safety requirements and test methods for baby walking frames into which a child is placed, and intended to be used from when the child is able to sit up by itself until the child is able to walk by itself.
This document does not apply to baby walking frames for therapeutic and curative purposes and to those baby walking frames relying on inflatable parts to support the child.
Toys (e.g. ride on toys, push-along toys, usually intended for children able to walk unaided) are not covered by this document.
If a baby walking frame has several functions or can be converted into another function the relevant European standards apply to it.
- Standard + National Annex and/or Foreword66 pagesForeword and/or annex in Slovenian language, body of the standard in English languagee-Library read for1 day
This European Standard specifies the additional safety requirements and test methods for pushchairs, designed for the carriage of one or more children, above15 kg and up to 22 kg each.
This European Standard applies in conjunction with and in addition to the European standard EN 1888-1 and it cannot be used separately.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements and test methods for products which provide a sleeping accommodation and are intended for the purpose of carrying a child in a lying position by means of handle(s) by using one hand and for stands which could be used in conjunction with these products (see B.2), intended for domestic use.
These products are intended for a child who cannot sit unaided, roll over or push up on its hands and knees, with a maximum weight of 9 kg. Hereafter, in this document these products are called "carry cots" and include all types of carry cot with rigid or non-rigid sides.
The following child products do not fall within the scope of this document: products for children with special needs; child products which are medical devices and child products that accommodate particular issues with child development such as prematurity or macrosomia.
NOTE If a product has or can be converted into other functions, additional European Standards can apply.
- Standard54 pagesEnglish languagee-Library read for1 day