83.080.20 - Thermoplastic materials
ICS 83.080.20 Details
Thermoplastic materials
Thermoplaste
Matériaux thermoplastiques
Plastomeri
General Information
Frequently Asked Questions
ICS 83.080.20 is a classification code in the International Classification for Standards (ICS) system. It covers "Thermoplastic materials". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 2032 standards classified under ICS 83.080.20 (Thermoplastic materials). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 83.080.20 - Thermoplastic materials
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document provides a framework and principles for design for recycling documents for assessing the identification of the level of compatibility of plastic-packaging feature with the applicable collection, sorting and recycling processes, describing the level of compatibility.
This document covers any packaging predominantly made of plastic and separate components predominantly made of plastic. It aims to provide a consistent approach for the guidelines and protocols for each polymer and format.
- Standard39 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with the state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of materials other than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard27 pagesEnglish languagee-Library read for1 day
This document covers the design of any bottle with the main body of the packaging unit predominantly made of PET and the design of separate components predominantly made of PET, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard20 pagesEnglish languagee-Library read for1 day
This document provides testing procedures and requirements on the evaluation processes for the sortability of plastic packaging with regard to compatibility of the design with state-of-the-art collecting and sorting processes for the plastic used.
This document covers any packaging predominantly made of plastic and separate packaging components predominantly made of plastic, both in case they undergo sorting processes.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard23 pagesEnglish languagee-Library read for1 day
This document covers the design of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard36 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard28 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with state-of-the-art collecting, sorting, and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Draft10 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process for bottles predominantly made of PET with respect to compatibility of the design with recycling processes.
Packaging components and ancillary elements made of other materials than PET are also covered by this document as they need to be evaluated for compatibility with the recycling processes.
- Draft24 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and for the evaluation process of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Draft29 pagesEnglish languagee-Library read for1 day
This document provides testing procedures and requirements on the evaluation processes for the sortability of plastic packaging with regard to compatibility of the design with state-of-the-art collecting and sorting processes for the plastic used.
This document covers any packaging predominantly made of plastic and separate packaging components predominantly made of plastic, both in case they undergo sorting processes.
- Standard34 pagesEnglish languagee-Library read for1 day
This document covers the design of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard36 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides a framework and principles for design for recycling documents for assessing the identification of the level of compatibility of plastic-packaging feature with the applicable collection, sorting and recycling processes, describing the level of compatibility.
This document covers any packaging predominantly made of plastic and separate components predominantly made of plastic. It aims to provide a consistent approach for the guidelines and protocols for each polymer and format.
- Standard39 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Draft12 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with recycling processes.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Draft13 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with the state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of materials other than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard27 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Draft23 pagesEnglish languagee-Library read for1 day
This document covers the design of any bottle with the main body of the packaging unit predominantly made of PET and the design of separate components predominantly made of PET, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard20 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Draft14 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard23 pagesEnglish languagee-Library read for1 day
This document specifies two methods for the determination of the chlorine content of homopolymers and copolymers of vinyl chloride, free from plasticizers or additives, namely:
method A (combustion in a bomb);
method B (combustion in a flask).
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies two methods for the determination of the chlorine content of homopolymers and copolymers of vinyl chloride, free from plasticizers or additives, namely:
method A (combustion in a bomb);
method B (combustion in a flask).
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies two methods for the determination of the chlorine content of homopolymers and copolymers of vinyl chloride, free from plasticizers or additives, namely: method A (combustion in a bomb); method B (combustion in a flask).
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies a mould (designated the type F ISO mould) for the injection moulding of plates with a preferred size of 80 mm × 120 mm, and a preferred thickness of 2 mm for single-point and multi-point data acquisition. Suitable test specimens according to ISO 20753 type A22 or B3 are then machined or stamped from the plates and used to obtain information on the anisotropy. For the design of plastic parts, this will provide upper and lower bounds for the tensile properties.
Investigation of the anisotropy of materials is a special procedure intended to provide guidance in the design of mouldings for end-use applications and is not intended as a quality control tool.
In the injection moulding of thermoplastic materials, the flow of molten polymer can influence the orientation of fillers such as fibreglass or the orientation of polymer chains, resulting in anisotropic behaviour.
For the purposes of this document, the flow direction is defined as the direction from the gate to the far end of the mould cavity and the cross direction as the direction perpendicular to the flow direction.
The type F mould is not intended to replace the type D mould used to determine the moulding shrinkage of thermoplastics.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies a mould (designated the type F ISO mould) for the injection moulding of plates with a preferred size of 80 mm × 120 mm, and a preferred thickness of 2 mm for single-point and multi-point data acquisition. Suitable test specimens according to ISO 20753 type A22 or B3 are then machined or stamped from the plates and used to obtain information on the anisotropy. For the design of plastic parts, this will provide upper and lower bounds for the tensile properties.
Investigation of the anisotropy of materials is a special procedure intended to provide guidance in the design of mouldings for end-use applications and is not intended as a quality control tool.
In the injection moulding of thermoplastic materials, the flow of molten polymer can influence the orientation of fillers such as fibreglass or the orientation of polymer chains, resulting in anisotropic behaviour.
For the purposes of this document, the flow direction is defined as the direction from the gate to the far end of the mould cavity and the cross direction as the direction perpendicular to the flow direction.
The type F mould is not intended to replace the type D mould used to determine the moulding shrinkage of thermoplastics.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies a mould (designated the type F ISO mould) for the injection moulding of plates with a preferred size of 80 mm × 120 mm, and a preferred thickness of 2 mm for single-point and multi-point data acquisition. Suitable test specimens according to ISO 20753 type A22 or B3 are then machined or stamped from the plates and used to obtain information on the anisotropy. For the design of plastic parts, this will provide upper and lower bounds for the tensile properties. Investigation of the anisotropy of materials is a special procedure intended to provide guidance in the design of mouldings for end-use applications and is not intended as a quality control tool. In the injection moulding of thermoplastic materials, the flow of molten polymer can influence the orientation of fillers such as fibreglass or the orientation of polymer chains, resulting in anisotropic behaviour. For the purposes of this document, the flow direction is defined as the direction from the gate to the far end of the mould cavity and the cross direction as the direction perpendicular to the flow direction. The type F mould is not intended to replace the type D mould used to determine the moulding shrinkage of thermoplastics.
- Standard6 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies the dimensions and the method for sampling and preparing test specimens, together with the conditions for carrying out the bend test.
The result of the test is also influenced by the deformation behaviour of the tested material, the kind of welding process and the geometry of the sample.
The test is applicable to plate and tube butt jointed assemblies made from thermoplastic materials filled or unfilled, but not reinforced, irrespective of the welding process used. It is not applicable to assemblies with a wall thickness < 3 mm.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies the dimensions and the method for sampling and preparing test specimens, together with the conditions for carrying out the bend test.
The result of the test is also influenced by the deformation behaviour of the tested material, the kind of welding process and the geometry of the sample.
The test is applicable to plate and tube butt jointed assemblies made from thermoplastic materials filled or unfilled, but not reinforced, irrespective of the welding process used. It is not applicable to assemblies with a wall thickness < 3 mm.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride).
This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems.
It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory.
This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties.
This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous.
This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it.
NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution.
This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.
- Standard25 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride).
This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems.
It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory.
This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties.
This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous.
This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it.
NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution.
This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.
- Standard25 pagesEnglish languagee-Library read for1 day
This document specifies the general “design for recycling” guidelines for EPS raw materials. It provides guidance on the impact of specific design characteristics on the recyclability of the product in practice and recommended design options to ensure that the product is recyclable, including target values and performance ranges, where applicable. It also provides a definition of recyclable product and of design for recycling.
This document refers to EPS thermal insulation products but may be used for other EPS construction products where appropriate.
This document refers to the recycling processes of EPS insulation products. The sorting and collecting steps are not part of this document.
This document takes into account all currently known recycling processes that are suitable to enable the circular economy for insulation materials. Particular attention is paid to ensuring that the most energy-efficient processes are given preference, especially mechanical recycling.
For some of these processes, practical experience has been gained over many years, so a basic knowledge base for the development of a guideline is already available.
At the same time, it is important to also take into account future-oriented processes, for which at the moment little but increasing experience is available or which have so far only been implemented on a small scale.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride). This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems. It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory. This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties. This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous. This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it. NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution. This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.
- Standard18 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
This document specifies the general “design for recycling” guidelines for EPS raw materials. It provides guidance on the impact of specific design characteristics on the recyclability of the product in practice and recommended design options to ensure that the product is recyclable, including target values and performance ranges, where applicable. It also provides a definition of recyclable product and of design for recycling.
This document refers to EPS thermal insulation products but may be used for other EPS construction products where appropriate.
This document refers to the recycling processes of EPS insulation products. The sorting and collecting steps are not part of this document.
This document takes into account all currently known recycling processes that are suitable to enable the circular economy for insulation materials. Particular attention is paid to ensuring that the most energy-efficient processes are given preference, especially mechanical recycling.
For some of these processes, practical experience has been gained over many years, so a basic knowledge base for the development of a guideline is already available.
At the same time, it is important to also take into account future-oriented processes, for which at the moment little but increasing experience is available or which have so far only been implemented on a small scale.
- Standard13 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(ethylene terephthalate) (PET) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard22 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard25 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard21 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard25 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(ethylene terephthalate) (PET) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polystyrene (PS) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PS recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polypropylene (PP) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PP recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastic wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard16 pagesEnglish languagee-Library read for1 day