13.030.50 - Recycling
ICS 13.030.50 Details
Recycling
Recycling
Recyclage
Recikliranje
General Information
Frequently Asked Questions
ICS 13.030.50 is a classification code in the International Classification for Standards (ICS) system. It covers "Recycling". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 259 standards classified under ICS 13.030.50 (Recycling). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 13.030.50 - Recycling
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document covers the design of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard36 pagesEnglish languagee-Library read for1 day
This document covers the design of any bottle with the main body of the packaging unit predominantly made of PET and the design of separate components predominantly made of PET, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard20 pagesEnglish languagee-Library read for1 day
This document provides testing procedures and requirements on the evaluation processes for the sortability of plastic packaging with regard to compatibility of the design with state-of-the-art collecting and sorting processes for the plastic used.
This document covers any packaging predominantly made of plastic and separate packaging components predominantly made of plastic, both in case they undergo sorting processes.
- Standard34 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with the state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of materials other than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard27 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides a framework and principles for design for recycling documents for assessing the identification of the level of compatibility of plastic-packaging feature with the applicable collection, sorting and recycling processes, describing the level of compatibility.
This document covers any packaging predominantly made of plastic and separate components predominantly made of plastic. It aims to provide a consistent approach for the guidelines and protocols for each polymer and format.
- Standard39 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard23 pagesEnglish languagee-Library read for1 day
This document gives guidance on the labelling and information folder of potentially permanent magnet containing products in the context of information exchange between supply chain actors to improve recyclability of permanent magnets.
This document can be used by any natural or legal person that will place into the EU market products containing permanent magnets. The document is horizontal by nature and can potentially be applied to any type of permanent magnet containing product. Explicitly in scope are the product- and component groups mentioned in the introduction, as soon the total mass of permanent magnets is above the reporting level threshold specified 4.1 of this document.
The document specifies:
1. the graphical format, application, and location of the labels, so they are easily located, legible, and scannable in the end-of-life state of the products in a way that is suitable for products of different sizes and complexity;
2. the specifications of the data carrier, both in its physical format as placed on the product, and the accessibility, security, and verifiability of information;
3. the access rights of relevant stakeholders to information;
4. the information to be supplied regarding the location and composition of the permanent magnets;
5. the information to be supplied regarding adjacent materials like coatings and fixation features, including adhesives;
6. how to create step-by-step instructions for accessing and safely removing the permanent magnets, specifying the tools and technologies required, providing the recyclers a practically useful, unequivocal guide on how the disassembly of the magnets can be done most efficiently, and
7. the format of the data to be supplied as per the previous points 4. – 6.
Labelling is employed for products which encompass at least one component mentioned above or a singular magnet, including segmented magnets, which holds a total mass of magnetic material as described in Table 1. Other magnet-holding components within a product that fall below that threshold are exempt from declaration and labelling. The purpose of these thresholds is to establish a sensible balance between the efforts required by both the responsible entities for labelling, as well as the efforts by the dismantlers and recyclers, and the output of recycled material. By excluding potential scrap sources where the yield would not warrant the effort, the work can be simplified for both sides.
- Draft40 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with the state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of materials other than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard27 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with state-of-the-art collecting, sorting, and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Draft10 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Draft12 pagesEnglish languagee-Library read for1 day
This document provides testing procedures and requirements on the evaluation processes for the sortability of plastic packaging with regard to compatibility of the design with state-of-the-art collecting and sorting processes for the plastic used.
This document covers any packaging predominantly made of plastic and separate packaging components predominantly made of plastic, both in case they undergo sorting processes.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with recycling processes.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Draft13 pagesEnglish languagee-Library read for1 day
This document covers the design of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard36 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard23 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process for bottles predominantly made of PET with respect to compatibility of the design with recycling processes.
Packaging components and ancillary elements made of other materials than PET are also covered by this document as they need to be evaluated for compatibility with the recycling processes.
- Draft24 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and for the evaluation process of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Draft29 pagesEnglish languagee-Library read for1 day
This document covers the design of any bottle with the main body of the packaging unit predominantly made of PET and the design of separate components predominantly made of PET, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard20 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Draft23 pagesEnglish languagee-Library read for1 day
This document provides a framework and principles for design for recycling documents for assessing the identification of the level of compatibility of plastic-packaging feature with the applicable collection, sorting and recycling processes, describing the level of compatibility.
This document covers any packaging predominantly made of plastic and separate components predominantly made of plastic. It aims to provide a consistent approach for the guidelines and protocols for each polymer and format.
- Standard39 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Draft14 pagesEnglish languagee-Library read for1 day
This document establishes the terms, definitions, methodologies and calculations that are necessary for the recovery and recycling of waste from plastic products and materials labelled as industrially compostable through organic recycling. It identifies the different types of organic recycling technologies used in the recovery and subsequent recycling of industrially compostable plastics waste arising from pre-consumer and post-consumer sources. It also establishes the requirements and calculations to be considered in evaluating organic recycling inputs and outputs and determining output classifications for the recycling operation and the downstream integration points. This document also outlines general quality requirements to be applied in all steps of the recovery process, and provides general recommendations for inclusion in material standards, test standards and product specifications. The process stages, requirements, recommendations and terminology presented in this document are intended to be of general applicability. This document does not establish test methods and criteria for the definition of the organic recyclability (e.g. compostability) of plastic materials and products. This document refers to plastic waste deriving from products that have been classified as suitable for recovery through organic recycling by the relevant reference standards (e.g. ISO 17088, ISO 18606), and therefore labelled as industrially compostable. These products are generally called “industrially compostable” (e.g. compostable bag, compostable tableware) meaning “suitable for organic recycling”, independently of the treatment technology used for recycling (whether it is composting, or a combination of anaerobic digestion and composting, or only anaerobic digestion). This document does not address home composting because this gardening practice cannot be classified as recycling.
- Standard13 pagesEnglish languagesale 15% off
This document specifies the general “design for recycling” guidelines for EPS raw materials. It provides guidance on the impact of specific design characteristics on the recyclability of the product in practice and recommended design options to ensure that the product is recyclable, including target values and performance ranges, where applicable. It also provides a definition of recyclable product and of design for recycling.
This document refers to EPS thermal insulation products but may be used for other EPS construction products where appropriate.
This document refers to the recycling processes of EPS insulation products. The sorting and collecting steps are not part of this document.
This document takes into account all currently known recycling processes that are suitable to enable the circular economy for insulation materials. Particular attention is paid to ensuring that the most energy-efficient processes are given preference, especially mechanical recycling.
For some of these processes, practical experience has been gained over many years, so a basic knowledge base for the development of a guideline is already available.
At the same time, it is important to also take into account future-oriented processes, for which at the moment little but increasing experience is available or which have so far only been implemented on a small scale.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies the general “design for recycling” guidelines for EPS raw materials. It provides guidance on the impact of specific design characteristics on the recyclability of the product in practice and recommended design options to ensure that the product is recyclable, including target values and performance ranges, where applicable. It also provides a definition of recyclable product and of design for recycling.
This document refers to EPS thermal insulation products but may be used for other EPS construction products where appropriate.
This document refers to the recycling processes of EPS insulation products. The sorting and collecting steps are not part of this document.
This document takes into account all currently known recycling processes that are suitable to enable the circular economy for insulation materials. Particular attention is paid to ensuring that the most energy-efficient processes are given preference, especially mechanical recycling.
For some of these processes, practical experience has been gained over many years, so a basic knowledge base for the development of a guideline is already available.
At the same time, it is important to also take into account future-oriented processes, for which at the moment little but increasing experience is available or which have so far only been implemented on a small scale.
- Standard13 pagesEnglish languagee-Library read for1 day
This document defines a system for the classification of recycled plastics based on the available data depth (Data Quality Levels, DQL) and provides guidelines for the labelling of the recyclate type and recycled content in compounds.
It is intended to support parties involved in the use and trading of recycled plastics, explicitly including digital trading platforms.
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies the integrated management of agricultural plastic products with agronomic performance.
This document gives guidance and requirements for their installation, use, removal, sorting, collection and preparation for recycling as well as general guidelines for design for recycling.
NOTE 1 EN 13206:2025, EN 13207:2025, EN 13655:2025, EN 14932:2025 and EN 17098-1:2025 include a specific clause dedicated to design for recycling.
NOTE 2 Design for recycling for products not covered by a standard is detailed in this document.
This document first aims professional users and can be used also for domestic purposes.
This document is applicable to:
- covering films that comply with EN 13206:2025 or with specifications laid out by the film manufacturer/supplier, used for covering greenhouses, small tunnels or livestock buildings, as well as to direct crop covers used for semi-forcing plants and seed;
- silage films for horizontal silos that comply with EN 13207:2025 or with specifications laid out by the film manufacturer/supplier;
- sheaths for horizontal silos (forage crop and grain storage) that comply with EN 13207:2025 or with specifications laid out by the sheath manufacturer/supplier;
- stretch films for wrapping bales that comply with EN 14932:2025 or with specifications laid out by the film manufacturer/supplier;
- thermoplastic mulching films that comply with EN 13655:2025 or with specifications laid out by the film manufacturer/supplier;
- barrier films for agricultural and horticultural soil disinfection by fumigation that comply with EN 17098-1:2025;
- nets and twines for catling and horticulture that comply with the specifications laid out by EN ISO 4167 or by the manufacturer/supplier;
- flexible ducts, semi-rigid and rigid pipes and fittings for irrigation that comply with ISO 8779, EN ISO 9261, ISO 13460-1, ISO 16438, EN 14267, EN 12324-2, EN 13635, EN 13997, EN 17176-2:2019+A1:2022 or with specifications laid out by the manufacturer/supplier;
- fabrics and non-woven nets and sheets for catling and horticulture that comply with ISO 9073 series or with specifications laid out by the manufacturer/supplier.
This document does not cover construction, packaging and food-contact products.
NOTE 3 For products non-suitable for recycling in the context of this document, specific procedures apply.
- Standard67 pagesEnglish languagee-Library read for1 day
Plastic waterproofing sheets generate plastic waste at different stages during their life cycle: production, construction process, service life and end-of-life.
This document specifies the source of recyclate made from pre-consumer material and post-consumer material as it is used in new products. These new products can be plastic waterproofing sheets, other sheets, other construction products or other products.
It defines terms and definitions.
It gives guidance for assessing the recyclates intended for use in the production of new products.
This document is applicable for similar products as construction sheets or membranes consisting of polymers or plastic components such as: swimming pool membranes, geosynthetic membranes, garden ponds membranes, protection membranes, accessories based on thermoplastic material such as walkways, prefabricated pieces. The listing is not exhaustive.
NOTE The design for recycling of packaging, including the recycling itself, is defined in the CEN/TC 261 “Packaging”.
- Standard17 pagesEnglish languagee-Library read for1 day
This document is the general part of the series that describes the designation system for plastic recyclates.
This document is dealing with recyclates after the recycling operation and prior to converting and compounding (when applicable). It is dealing with preparation of samples and determination of properties.
NOTE 1 This document supports the underlaying standards of this series that, per polymer type, provide an overview of the relevant characteristics and typical values for recyclates for use in certain application groups (product families) in combination with the relevant converting technologies.
NOTE 2 The overview of the relevant properties is based on and further extends the relevant properties given in EN ISO 10350 1.
- Standard15 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard25 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(ethylene terephthalate) (PET) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard22 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard34 pagesEnglish languagee-Library read for1 day
This document defines a system for the classification of recycled plastics based on the available data depth (Data Quality Levels, DQL) and provides guidelines for the labelling of the recyclate type and recycled content in compounds.
It is intended to support parties involved in the use and trading of recycled plastics, explicitly including digital trading platforms.
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies the integrated management of agricultural plastic products with agronomic performance.
This document gives guidance and requirements for their installation, use, removal, sorting, collection and preparation for recycling as well as general guidelines for design for recycling.
NOTE 1 EN 13206:2025, EN 13207:2025, EN 13655:2025, EN 14932:2025 and EN 17098-1:2025 include a specific clause dedicated to design for recycling.
NOTE 2 Design for recycling for products not covered by a standard is detailed in this document.
This document first aims professional users and can be used also for domestic purposes.
This document is applicable to:
- covering films that comply with EN 13206:2025 or with specifications laid out by the film manufacturer/supplier, used for covering greenhouses, small tunnels or livestock buildings, as well as to direct crop covers used for semi-forcing plants and seed;
- silage films for horizontal silos that comply with EN 13207:2025 or with specifications laid out by the film manufacturer/supplier;
- sheaths for horizontal silos (forage crop and grain storage) that comply with EN 13207:2025 or with specifications laid out by the sheath manufacturer/supplier;
- stretch films for wrapping bales that comply with EN 14932:2025 or with specifications laid out by the film manufacturer/supplier;
- thermoplastic mulching films that comply with EN 13655:2025 or with specifications laid out by the film manufacturer/supplier;
- barrier films for agricultural and horticultural soil disinfection by fumigation that comply with EN 17098-1:2025;
- nets and twines for catling and horticulture that comply with the specifications laid out by EN ISO 4167 or by the manufacturer/supplier;
- flexible ducts, semi-rigid and rigid pipes and fittings for irrigation that comply with ISO 8779, EN ISO 9261, ISO 13460-1, ISO 16438, EN 14267, EN 12324-2, EN 13635, EN 13997, EN 17176-2:2019+A1:2022 or with specifications laid out by the manufacturer/supplier;
- fabrics and non-woven nets and sheets for catling and horticulture that comply with ISO 9073 series or with specifications laid out by the manufacturer/supplier.
This document does not cover construction, packaging and food-contact products.
NOTE 3 For products non-suitable for recycling in the context of this document, specific procedures apply.
- Standard67 pagesEnglish languagee-Library read for1 day
This document specifies recommendations for the design of polymeric products used in road vehicles to facilitate separation and recycling after shredding.
This document is not applicable to dismantling of road vehicles and removal of parts and components.
This document is not applicable to elastomers.
- Technical specification20 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard21 pagesEnglish languagee-Library read for1 day
Plastic waterproofing sheets generate plastic waste at different stages during their life cycle: production, construction process, service life and end-of-life.
This document specifies the source of recyclate made from pre-consumer material and post-consumer material as it is used in new products. These new products can be plastic waterproofing sheets, other sheets, other construction products or other products.
It defines terms and definitions.
It gives guidance for assessing the recyclates intended for use in the production of new products.
This document is applicable for similar products as construction sheets or membranes consisting of polymers or plastic components such as: swimming pool membranes, geosynthetic membranes, garden ponds membranes, protection membranes, accessories based on thermoplastic material such as walkways, prefabricated pieces. The listing is not exhaustive.
NOTE The design for recycling of packaging, including the recycling itself, is defined in the CEN/TC 261 “Packaging”.
- Standard17 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(ethylene terephthalate) (PET) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard22 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard28 pagesEnglish languagee-Library read for1 day
This document specifies recommendations for the design of polymeric products used in road vehicles to facilitate separation and recycling after shredding.
This document is not applicable to dismantling of road vehicles and removal of parts and components.
This document is not applicable to elastomers.
- Technical specification20 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagee-Library read for1 day
This document provides characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard25 pagesEnglish languagee-Library read for1 day
This document is the general part of the series that describes the designation system for plastic recyclates.
This document is dealing with recyclates after the recycling operation and prior to converting and compounding (when applicable). It is dealing with preparation of samples and determination of properties.
NOTE 1 This document supports the underlaying standards of this series that, per polymer type, provide an overview of the relevant characteristics and typical values for recyclates for use in certain application groups (product families) in combination with the relevant converting technologies.
NOTE 2 The overview of the relevant properties is based on and further extends the relevant properties given in EN ISO 10350 1.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polypropylene (PP) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PP recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastic wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard16 pagesEnglish languagee-Library read for1 day