SIST EN 60700-1:2015

SLOVENSKI STANDARD
01-december-2015
1DGRPHãþD
SIST EN 60700-1:2001
SIST EN 60700-1:2001/A1:2004
SIST EN 60700-1:2001/A2:2009
7LULVWRUVNLYHQWLOLHOHNWURQNH]DYLVRNRQDSHWRVWQLHQRVPHUQLSUHQRV+9'&
HOHNWULþQHHQHUJLMHGHO(OHNWULþQRSUHVNXãDQMH
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1:
Electrical testing
Ta slovenski standard je istoveten z: EN 60700-1:2015
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
31.080.20 Tiristorji Thyristors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60700-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2015
ICS 29.200 Supersedes EN 60700-1:1998
English Version
Thyristor valves for high voltage direct current (HVDC) power
transmission - Part 1: Electrical testing
(IEC 60700-1:2015)
Valves à thyristors pour le transport d'énergie en courant Thyristorventile für Hochspannungsgleichstrom-
continu à haute tension (CCHT) - Partie 1: Essais Energieübertragung (HGÜ) - Teil 1: Elektrische Prüfung
électriques (IEC 60700-1:2015)
(IEC 60700-1:2015)
This European Standard was approved by CENELEC on 2015-09-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60700-1:2015 E
European foreword
The text of document 22F/341/CDV, future edition 2 of IEC 60700-1, prepared by SC 22F “Power
electronics for electrical transmission and distribution systems” of IEC/TC 22 “Power electronic
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60700-1:2015.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-06-01
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-09-01
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60700-1:1998.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60700-1:2015 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60060 Series High-voltage test techniques EN 60060 Series
IEC 60060-1 -  High-voltage test techniques - EN 60060-1 -
Part 1: General definitions and test
requirements
IEC 60071-1 -  Insulation co-ordination - EN 60071-1 -
Part 1: Definitions, principles and rules
IEC 60099 Series Surge arresters EN 60099 Series
IEC 60270 -  High-voltage test techniques - Partial EN 60270 -
discharge measurements
IEC 61803 1999 Determination of power losses in high- EN 61803 1999
+A1 2010 voltage direct current (HVDC) converter +A1 2010
stations
1)
ISO/IEC Guide 25 -  General requirements for the competence - -
of calibration and testing laboratories

1)
Withdrawn publication.
IEC 60700-1 ®
Edition 2.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Thyristor valves for high voltage direct current (HVDC) power transmission –

Part 1: Electrical testing
Valves à thyristors pour le transport d'énergie en courant continu à haute

tension (CCHT) –
Partie 1: Essais électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200 ISBN 978-2-8322--2805-0

– 2 – IEC 60700-1:2015 © IEC 2015
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions. 7
3.1 Insulation co-ordination terms . 8
3.2 Valve construction terms . 9
3.3 Terms related to type tests . 10
3.4 Terms related to production tests . 10
4 General requirements . 10
4.1 Guidelines for the performance of type tests . 10
4.1.1 Evidence in lieu . 10
4.1.2 Test object . 10
4.1.3 Sequence of tests . 10
4.1.4 Test procedures . 11
4.1.5 Ambient temperature for testing . 11
4.1.6 Frequency for testing . 11
4.1.7 Test reports . 11
4.2 Atmospheric correction . 11
4.3 Treatment of redundancy . 11
4.3.1 Dielectric tests . 11
4.3.2 Operational tests . 11
4.4 Criteria for successful type testing . 12
4.4.1 General . 12
4.4.2 Criteria applicable to thyristor levels . 12
4.4.3 Criteria applicable to the valve as a whole . 13
5 List of type tests . 13
6 Dielectric tests on valve support . 14
6.1 Purpose of tests . 14
6.2 Test object . 14
6.3 Test requirements . 15
6.3.1 General . 15
6.3.2 Valve support d.c. voltage test . 15
6.3.3 Valve support a.c. voltage test . 15
6.3.4 Valve support switching impulse test . 16
6.3.5 Valve support lightning impulse test . 16
7 Dielectric tests for multiple valve units (MVU) . 16
7.1 Purpose of tests . 16
7.2 Test object . 16
7.3 Test requirements . 17
7.3.1 MVU d.c. voltage test to earth . 17
7.3.2 MVU a.c. voltage test . 18
7.3.3 MVU switching impulse test . 18
7.3.4 MVU lightning impulse test . 19
8 Dielectric tests between valve terminals . 20
8.1 Purpose of tests . 20
8.2 Test object . 20

IEC 60700-1:2015 © IEC 2015 – 3 –
8.3 Test requirements . 20
8.3.1 Valve d.c. voltage test . 20
8.3.2 Valve a.c. voltage test . 21
8.3.3 Valve impulse tests (general) . 22
8.3.4 Valve switching impulse test . 23
8.3.5 Valve lightning impulse test . 23
8.3.6 Valve steep front impulse test . 23
8.4 Valve non-periodic firing test . 24
8.4.1 Purpose of test . 24
8.4.2 Test object . 24
8.4.3 Test requirements . 24
9 Periodic firing and extinction tests . 25
9.1 Purpose of tests . 25
9.2 Test object . 26
9.3 Test requirements . 26
9.3.1 General . 26
9.3.2 Maximum continuous operating duty tests . 27
9.3.3 Maximum temporary operating duty test (α = 90°) . 28
9.3.4 Minimum a.c. voltage tests . 29
9.3.5 Temporary undervoltage test .
...