oSIST prEN IEC 60335-2-111:2026
(Main)Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
This European Standard deals with the safety of electric ondol-mattresses for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to control units supplied with the appliance
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-111: Besondere Anforderungen für elektrische Ondol-Matratzen mit einem nicht flexiblen beheizten Teil
Appareils électrodomestiques et analogues - Sécurité - Part 2-111: Exigences particulières pour les matelas électriques ondol avec une partie chauffée non-flexible
L'IEC 60335-2-111:2024 traite de la sécurité des matelas ondol électriques pour usages domestiques et analogues, dont la tension assignée est inférieure ou égale à 250 V, y compris les appareils alimentés en courant continu et les appareils alimentés par batteries. La présente norme s'applique également aux unités de commande fournies avec l'appareil. Les appareils non destinés à un usage domestique normal, mais qui peuvent néanmoins constituer une source de danger pour le public, tels que les appareils destinés à être utilisés dans les stations thermales ou par des personnes à des températures ambiantes froides, sont compris dans le domaine d'application de la présente norme.
Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils, encourus par tous les individus à l'intérieur et autour de l'habitation. Cependant, elle ne tient en général pas compte:
- des personnes (y compris des enfants) dont les capacités physiques, sensorielles ou mentales; ou le manque d'expérience et de connaissance les empêchent d'utiliser l'appareil en toute sécurité sans surveillance ou instruction;
- des enfants qui jouent avec l'appareil.
La présente norme ne s'applique pas
- aux appareils prévus exclusivement pour des usages industriels;
- aux appareils destinés à être utilisés dans des locaux qui présentent des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz);
- aux couvertures, coussins, vêtements et appareils chauffants souples analogues (IEC 60335-2-17);
- aux appareils de chauffage des locaux (IEC 60335-2-30);
- aux dispositifs de chauffage pour matelas à eau (IEC 60335-2-66);
- aux appareils de chauffage destinés à la reproduction et à l'élevage des animaux (IEC 60335-2-71);
- aux chancelières et carpettes chauffantes (IEC 60335-2-81);
- aux films souples chauffants pour le chauffage des locaux (IEC 60335-2-96);
- aux tapis chauffants et aux unités chauffantes pour le chauffage des locaux, installés sous des revêtements de sol amovibles (IEC 60335 2 106);
- aux appareils spécifiquement destinés à être utilisés sous surveillance médicale (IEC 80601-2-35).
Cette deuxième édition annule et remplace la première édition parue en 2015. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le texte a été aligné sur l'IEC 60335-1:2020;
b) certaines notes ont été converties en texte normatif (Article 1);
c) l'application du calibre d'essai 19 a été introduite (8.1.1, 20.2, B.22.3, B.22.4).
La présente partie 2 doit être utilisée conjointement avec la dernière édition de l'IEC 60335-1 et ses amendements sauf si cette édition l'exclut. Dans ce cas, la dernière édition qui n'exclut pas la présente partie 2 est utilisée. Elle a été établie sur la base de la sixième édition (2020) de cette norme.
Gospodinjski in podobni električni aparati - Varnost - 2-111. del: Posebne zahteve za grelne vzmetnice s togimi grelnimi elementi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2026
Gospodinjski in podobni električni aparati - Varnost - 2-111. del: Posebne zahteve
za grelne vzmetnice s togimi grelnimi elementi
Household and similar electrical appliances - Safety - Part 2-111: Particular requirements
for electric ondol mattress with a non-flexible heated part
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-111:
Besondere Anforderungen für elektrische Ondol-Matratzen mit einem nicht flexiblen
beheizten Teil
Appareils électrodomestiques et analogues - Sécurité - Part 2-111: Exigences
particulières pour les matelas électriques ondol avec une partie chauffée non-flexible
Ta slovenski standard je istoveten z: prEN IEC 60335-2-111:2025
ICS:
13.120 Varnost na domu Domestic safety
97.030 Električni aparati za dom na Domestic electrical
splošno appliances in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-111
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2025
ICS 13.120; 97.100.10; 97.140 Will supersede EN IEC 60335-2-111:2019
English Version
Household and similar electrical appliances - Safety - Part 2-111:
Particular requirements for electric ondol mattress with a non-
flexible heated part
(IEC 60335-2-111:2024)
Appareils électrodomestiques et analogues - Sécurité - Part Sicherheit elektrischer Geräte für den Hausgebrauch und
2-111: Exigences particulières pour les matelas électriques ähnliche Zwecke - Teil 2-111: Besondere Anforderungen für
ondol avec une partie chauffée non-flexible elektrische Ondol-Matratzen mit einem nicht flexiblen
(IEC 60335-2-111:2024) beheizten Teil
(IEC 60335-2-111:2024)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2026-02-13.
The text of this draft consists of the text of IEC 60335-2-111:2024.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81630 Ref. No. prEN IEC 60335-2-111:2025 E
European foreword
This document (prEN IEC 60335-2-111:2025) consists of the text of document IEC 60335-2-111:2024,
prepared by IEC/TC 61 "Safety of household and similar electrical appliances".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
This document will supersede EN IEC 60335-2-111:2019 and all of its amendments and corrigenda (if
any).
This document is read in conjunction with prEN IEC 60335-2-111:2025/prAA:2025.
IEC 60335-2-111 ®
Edition 2.0 2024-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-111: Particular requirements for electric ondol mattress with a non-
flexible heated part
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-111: Exigences particulières pour les matelas électriques ondol avec
une partie chauffée non flexible
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120, 97.100.10, 97.140 ISBN 978-2-8322-9752-0
– 2 – IEC 60335-2-111:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 9
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Charging of metal-ion batteries . 12
13 Leakage current and electric strength at operating temperature . 12
14 Transient overvoltages . 12
15 Moisture resistance . 13
16 Leakage current and electric strength . 13
17 Overload protection of transformers and associated circuits . 13
18 Endurance . 13
19 Abnormal operation . 13
20 Stability and mechanical hazards . 14
21 Mechanical strength . 14
22 Construction . 15
23 Internal wiring . 15
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 16
28 Screws and connections . 16
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 17
31 Resistance to rusting . 17
32 Radiation, toxicity and similar hazards . 17
Annexes . 19
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 20
Annex AA (normative) Specification for thermal insulation . 21
Bibliography . 22
IEC 60335-2-111:2024 © IEC 2024 – 3 –
Figure 101 – Arrangement for measuring leakage current and electric strength of the
ondol-mattress . 18
Figure 102 – Positioning of the thermal insulation on an ondol-mattress incorporating
thermostats . 18
– 4 – IEC 60335-2-111:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-111: Particular requirements for electric ondol-mattress
with a non-flexible heated part
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.