kSIST-TS FprCEN ISO/TS 5341:2027
(Main)Nanotechnologies - Nomenclature - General (ISO/TS 5341:2026)
- Abstract
This document gives guidance and a uniform system for the use of the prefix “nano” and core terms as descriptive modifiers for the field of nanotechnologies, to reduce the need for new term definitions
- Status
- Not Published
- Public Enquiry End Date
- 14-Jan-2027
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
- Start Date
- 17-Nov-2026
- Due Date
- 06-Apr-2027
kSIST-TS FprCEN ISO/TS 5341:2027 is a SIST technical specification that adopts ISO/TS 5341:2026 for nanotechnologies nomenclature. It gives a uniform way to use the prefix “nano” and related core terms as descriptive qualifiers, so people writing, reading, or standardizing nanotechnology terminology can name concepts consistently without inventing new definitions every time.
What does kSIST-TS FprCEN ISO/TS 5341:2027 specify?
kSIST-TS FprCEN ISO/TS 5341:2027 specifies principles and rules for naming general terms in nanotechnologies. Its focus is the use of identified qualifiers to describe concepts, materials, objects, items, and phenomena in a consistent way.
| Clause | What it covers |
|---|---|
| 1 Scope | Principles and rules for naming general nanotechnology terms |
| 2 Normative references | No normative references |
| 3 Terms and definitions | General terms, naming-convention terms, and qualifier terms |
| 4 General concepts and naming principles | How qualifiers combine with target terms, with syntax and examples |
| Bibliography | Source and related references |
| Alphabetical index | Term index for quick lookup |
Clause 1 also points readers to ISO 80004-1:2023 for additional nanotechnology terms and definitions. Clause 4 is the practical heart of the document: it shows how to build compound names from a qualifier and a target term.
What are the key requirements of kSIST-TS FprCEN ISO/TS 5341:2027?
kSIST-TS FprCEN ISO/TS 5341:2027 is a terminology and naming document, so its main requirements are about how to form names and how to interpret them. The document is built around a target term that is modified by a qualifier.
How the naming system works
- Clause 4 says the naming method uses a qualifier plus a target term. In practice, that means the document is not just defining words - it is defining how to construct them.
- Clause 4 distinguishes qualifiers that precede the target term and qualifiers that succeed it. This matters because the word order changes the form of the resulting term.
- For precedent qualifiers, Clause 4 gives two syntactic patterns: a uninomial form and a multinomial form. The practical effect is that some names become single compound words, while others stay as separate words.
- Clause 4 says the hyphen is used in uninomial naming only when the adjacent letters create a vowel collision. In practice, this is a spelling rule for building readable compound terms.
How qualifier meaning depends on the domain
- Clause 3.3.1 defines several uses of the qualifier nano for different domains such as material, object geometry, discipline, and multiphase system. This matters because the same qualifier does not mean the same thing in every context.
- Clause 3.3.2 defines nanoscale qualifier terms for material, characteristic, activity, and phenomena domains. In practice, users need to match the qualifier form to what they are describing - a material, a feature, an action, or an event.
- Clause 3.3.3 defines nanotechnology qualifier terms for industry, material, science area, and item domains. This helps writers distinguish between a technology field, a material technology area, and an item that involves nanotechnology.
- Clause 4.1 says that the definitions should be read through the domain of the target term, shown in angled brackets when needed. That means the same term can be valid in one subject area and not in another.
Which core terms the document standardizes
- Clause 3.1 gives the underlying vocabulary for nanotechnology naming, including nanomaterial, nano-object, nanostructure, nanostructured material, and nanophase. These terms matter because they anchor the rest of the naming system.
- Clause 3.3.4 applies the convention to common nanotechnology terms such as nanocoating, nanodispersion, nano-emulsion, nanosuspension, nanopore, nanoporous membrane, and nanofilm. In practice, these are the kinds of terms users are expected to form and interpret consistently.
- Clause 3.3.4 also separates closely related shapes and structures such as nanoparticle, nanoplate, nanofibre, nanotube, nanorod, nanowire, and nanocone. That helps users choose the most accurate term instead of using a broad label for every nanoscale object.
- Clause 3.3.4 distinguishes nano-enabled from nano-enhanced. The first is for something only possible with nanotechnology, while the second is for something improved or intensified by nanotechnology. In practice, this distinction affects technical descriptions, product literature, and terminology control.
What terms does kSIST-TS FprCEN ISO/TS 5341:2027 define?
- Nanoscale - the size range used throughout the document for nanoscale concepts and qualifiers.
- Nanomaterial - a material with nanoscale external dimensions or with nanoscale internal or surface structure.
- Nano-object - a discrete piece of material with external dimensions in the nanoscale.
- Nanostructure - a surface or internal feature with one or more nanoscale dimensions.
- Nanotechnology - the application of scientific knowledge to manipulate and control matter predominantly in the nanoscale.
- Qualifier - a descriptive term or prefix used to narrow the meaning of a target term.
- Target term - the term that is modified by a qualifier.
- NOAA - nano-objects and their aggregates and agglomerates, used for material made up of nano-objects and their clustered forms.
Who uses kSIST-TS FprCEN ISO/TS 5341:2027?
kSIST-TS FprCEN ISO/TS 5341:2027 is used by people who need controlled nanotechnology vocabulary in standards work, technical writing, research, and product documentation. It is especially relevant where names must stay consistent across reports, specifications, catalogs, and terminology databases.
Typical users include standards developers, terminology specialists, researchers, laboratory staff, product developers, and technical communicators working in nanotechnologies. It is also useful for teams describing nanomaterials, nano-objects, coatings, dispersions, membranes, and related phenomena, because the document shows how to name those items consistently.
Which standards are used with kSIST-TS FprCEN ISO/TS 5341:2027?
Clause 2 states that there are no normative references in this document. Even so, the text relies heavily on ISO 80004-1:2023, which provides consolidated core vocabulary for nanotechnologies and supplies many of the source definitions used here.
The introduction also points to the ISO 80004 series as the background for the terminology approach. ISO 4618:2023 is cited in a note linked to the definition of coating and substrate terminology, so users working on surface-related terms may need it as context.
What does the kSIST-TS FprCEN ISO/TS 5341:2027 document contain?
This document contains Clause 4’s naming principles, including the distinction between precedent and succeeding qualifiers and the syntax for uninomial and multinomial naming. It also includes a figure that labels the parts of a qualifier terminological entry, so readers can see how the definition is built.
Clause 4 gives worked examples of compound term creation, including how a target term and a qualifier are combined and then simplified into a usable definition. Clause 3 contains the defined terminology set, and the alphabetical index helps users find terms quickly by name. The bibliography lists related vocabulary and style sources that support the terminology approach.
Frequently Asked Questions
kSIST-TS FprCEN ISO/TS 5341:2027 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Nanotechnologies - Nomenclature - General (ISO/TS 5341:2026)". This standard covers: This document gives guidance and a uniform system for the use of the prefix “nano” and core terms as descriptive modifiers for the field of nanotechnologies, to reduce the need for new term definitions
This document gives guidance and a uniform system for the use of the prefix “nano” and core terms as descriptive modifiers for the field of nanotechnologies, to reduce the need for new term definitions
kSIST-TS FprCEN ISO/TS 5341:2027 is classified under the following ICS (International Classification for Standards) categories: 07.120 - Nanotechnologies. The ICS classification helps identify the subject area and facilitates finding related standards.
kSIST-TS FprCEN ISO/TS 5341:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2027
Nanotehnologije - Nomenklatura - Splošno (ISO/TS 5341:2026)
Nanotechnologies - Nomenclature - General (ISO/TS 5341:2026)
Nanotechnologien - Begriffe - Allgemeine Begriffe (ISO/TS 5341:2026)
Nanotechnologies - Nomenclature - Généralités (ISO/TS 5341:2026)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 5341
ICS:
07.120 Nanotehnologije Nanotechnologies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
Technical
Specification
ISO/TS 5341
First edition
Nanotechnologies — Nomenclature
2026-04
— General
Nanotechnologies — Nomenclature — Généralités
Reference number
ISO/TS 5341:2026(en) © ISO 2026
ISO/TS 5341:2026(en)
© ISO 2026
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 5341:2026(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms .1
3.2 Terms used to describe the naming convention .6
3.3 Qualifier terms .7
4 General concepts and naming principles .11
4.1 General .11
4.2 Qualifiers that precede the target term . 13
4.2.1 General . 13
4.2.2 Precedent qualifier uninomial naming convention . 13
4.2.3 Precedent qualifier multinomial naming convention . 13
4.3 Qualifiers that succeed the target term . 13
Bibliography .15
Alphabetical index .16
iii
ISO/TS 5341:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 229, Nanotechnologies.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/TS 5341:2026(en)
Introduction
The main purpose of this document is to provide a general terminology naming system for the use in the
field of nanotechnologies for commonly used descriptors such as “nano”, “nanostructured”, “nanomaterial”
and “nanotechnology”. The system of principles and rules described within gives rise to a nomenclature
convention for naming nanomaterials and nanotechnology-related items to promote communication and
consistency in vocabularies. This nomenclature convention has been derived from the ISO/TS 80004 series
that has been developed over the last 15 years and is intended to reduce the need for new term creation,
while providing guidance intended to improve communication of social and technically relevant terms.
Much of the terminology in nanotechnologies includes the use of a common group of descriptors. Many of
these descriptors have been reduced and defined as qualifiers with identified usage conventions in this
document to be consistent with essence of the original vocabulary in the ISO/TS 80004 series. The naming
conventions provided in this document allow for the reduction of required defined terms in the ISO/TS 80004
series documents while maintaining consistency in communication. A list of all parts of the ISO 80004 series
can be found on the ISO website.
In 2023, ISO/TS 80004-1:2015, ISO/TS 80004-2:2015, ISO/TS 80004-4:2011, and ISO/TS 80004-11:2017
were combined into ISO 80004-1:2023Nanotechnologies – Vocabulary – Part 1: Core Vocabulary. Unless
terms are specifically defined as otherwise within relevant International Standards, the naming convention
provided in this document apply for the field of nanotechnologies.
This document is deliberately intended to capture the essence of the naming convention that has implicitly
emerged through the development of terminology in standardization and in the broader nanotechnology
community. ISO 80004-1:2023 complements this document by providing consolidated terms and definitions
for the nanotechnologies field. Naming convention details for more complex particles, systems and
structures are planned for future nomenclature documents.
The naming convention is constructed through the inclusion of defined qualifier terms that are used to
modify a target term. Instructions for and examples of the naming convention used are provided in Clause 4,
while definitions of the qualifier terms are provided in Clause 3 of this document.
v
Technical Specification ISO/TS 5341:2026(en)
Nanotechnologies — Nomenclature — General
1 Scope
This document provides the principles and rules for the naming of general terms in the field of
nanotechnologies. This document gives guidance for the naming of a range of concepts, materials, objects,
items and phenomena using a series of identified qualifiers, following the convention described within this
document.
NOTE Additional terms and definitions that relate to nanotechnologies are provided in ISO 80004-1:2023.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1 General terms
3.1.1
nanoscale
length range approximately from 1 nm to 100 nm
[SOURCE: ISO 80004-1:2023, 3.1.1]
3.1.2
nanomaterial
material with any external dimension in the nanoscale (3.1.1) or having internal structure or surface
structure in the nanoscale
Note 1 to entry: This generic term is inclusive of nano‐object (3.1.3) and nanostructured material (3.1.5).
3.1.3
nano-object
discrete piece of material with one, two or three external dimensions in the nanoscale (3.1.1)
[SOURCE: ISO 80004-1:2023, 3.1.5]
3.1.4
nanostructure
surface or internal feature with one or more dimensions in the nanoscale (3.1.1)
Note 1 to entry: A feature includes but is not limited to nano‐objects (3.1.3), structures, morphologies or other
identifiable areas of nanoscale dimensions. For example, the nanostructure can be a nanopore (3.1.22) or a solid
feature on an object.
[SOURCE: ISO 80004-1:2023, 3.1.6]
ISO/TS 5341:2026(en)
3.1.5
nanostructured material
material having internal nanostructure (3.1.4) or surface nanostructure
Note 1 to entry: This definition does not exclude the possibility for a nano‐object (3.1.3) to have internal structure or
surface structure. If external dimension(s) are in the nanoscale (3.1.1), the term nano-object is recommended.
[SOURCE: ISO 80004-1:2023, 3.1.7]
3.1.6
nanoparticle
nano‐object (3.1.3) with all external dimensions in the nanoscale (3.1.1)
Note 1 to entry: If the dimensions differ significantly (typically by more than 3 times), terms such as nanofibre (3.1.8)
or nanoplate (3.1.7) are preferable to the term nanoparticle.
[SOURCE: ISO 80004-1:2023, 3.3.4]
3.1.7
nanoplate
nano‐object (3.1.3) with one external dimension in the nanoscale (3.1.1) and the other two external
dimensions significantly larger
Note 1 to entry: The larger external dimensions are not necessarily in the nanoscale.
[SOURCE: ISO 80004-1:2023, 3.3.6]
3.1.7.1
nanoflake
nanoplate (3.1.7) with limited lateral dimensions
[SOURCE: ISO 80004-1:2023, 3.3.6.1]
3.1.7.2
nanofoil
nanosheet
nanoplate (3.1.7) with extended lateral dimensions
Note 1 to entry: Nanofoil and nanosheet are used synonymously in specific industries.
Note 2 to entry: Nanofoil and nanosheet extend further with respect to their length and width compared to nanoplate
(3.1.7) or nanoflake (3.1.7.1).
[SOURCE: ISO 80004-1:2023, 3.3.6.2]
3.1.7.3
nanoribbon
nanotape
nanoplate (3.1.7) with the two larger dimensions significantly different from each other
[SOURCE: ISO 80004-1:2023, 3.3.10]
3.1.8
nanofibre
nano‐object (3.1.3) with two external dimensions in the nanoscale (3.1.1) and the third dimension
significantly larger
Note 1 to entry: The largest external dimension is not necessarily in the nanoscale.
[SOURCE: ISO 80004-1:2023, 3.3.5]
ISO/TS 5341:2026(en)
3.1.8.1
nanotube
hollow nanofibre (3.1.8)
[SOURCE: ISO 80004-1:2023, 3.3.8]
3.1.8.2
nanorod
solid nanofibre (3.1.8)
[SOURCE: ISO 80004-1:2023, 3.3.7]
3.1.8.3
nanowire
electrically conducting or semi-conducting nanofibre (3.1.8)
[SOURCE: ISO 80004-1:2023, 3.3.9]
3.1.9
nanocone
cone-shaped nanofibre (3.1.8) or nanoparticle (3.1.6)
[SOURCE: ISO 80004-1:2023, 3.3.14]
3.1.10
nanophase
physically or chemically distinct region or collective term for physically distinct regions of the same kind in
a material with the discrete regions having one, two or three dimensions in the nanoscale (3.1.1)
Note 1 to entry: Nano‐objects (3.1.3) embedded in another phase constitute a nanophase.
[SOURCE: ISO 80004-1:2023, 3.4.2]
3.1.11
nanotechnology
application of scientific knowledge to manipulate and control matter predominantly in the nanoscale (3.1.1)
to make use of size- and structure-dependent properties and phenomena distinct from those associated
with individual atoms or molecules, or extrapolation from larger sizes of the same material
Note 1 to entry: Manipulation and control include, for example, material synthesis and processing.
[SOURCE: ISO 80004-1:2023, 3.1.3]
3.1.12
nano-enabled
exhibiting function or performance only possible with nanotechnology (3.1.11)
[SOURCE: ISO 80004-1:2023, 3.1.14]
3.1.13
nano-enhanced
exhibiting function or performance intensified or improved by nanotechnology (3.1.11)
[SOURCE: ISO 80004-1:2023, 3.1.15]
3.1.14
coating
adherent surface layer (3.1.19)
Note 1 to entry: A coating can consist of multiple layers.
Note 2 to entry: A coating is always attached to a substrate (see ISO 4618:2023, 3.245).
[SOURCE: ISO 80004-1:2023, 3.6.6]
ISO/TS 5341:2026(en)
3.1.15
nanocoating
coating (3.1.14) with thickness in the nanoscale (3.1.1)
[SOURCE: ISO 80004-1:2023, 3.1.16]
3.1.16
nanodispersion
material in which nano‐objects (3.1.3) or a nanophase (3.1.10) are dispersed in a continuous phase of a
different composition
[SOURCE: ISO 80004-1:2023, 3.1.18]
3.1.16.1
fluid nanodispersion
heterogeneous material in which nano‐objects (3.1.3) or a nanophase (3.1.10) are dispersed in a continuous
fluid phase of a different composition
[SOURCE: ISO 80004-1:2023, 3.8.2]
3.1.16.2
nano-emulsion
fluid nanodispersion (3.1.16.1) with at least one liquid phase
[SOURCE: ISO 80004-1:2023, 3.1.18.1]
3.1.16.3
nanosuspension
fluid nanodispersion (3.1.16.1) where the dispersed phase is a solid
[SOURCE: ISO 80004-1:2023, 3.1.18.2, modified — Note 1 to entry is deleted.]
3.1.17
nanosphere
spherical nano‐object (3.1.3)
[SOURCE: ISO 80004-1:2023, 3.3.11]
3.1.18
nanocrystal
nano‐object (3.1.3) with a crystalline structure
[SOURCE: ISO 80004-1:2023, 3.3.15]
3.1.19
layer
monolayer
discrete material restricted in one dimension, within or at the surface of a condensed phase
[SOURCE: ISO 80004-1:2023, 3.6.2]
3.1.20
nanolayer
layer (3.1.19) of material with thickness in the nanoscale (3.1.1)
[SOURCE: ISO 80004-1:2023, 3.7.2]
3.1.21
membrane
structure, having lateral dimensions much greater than its thickness, through which transfer can occur
under a variety of driving forces
[SOURCE: ISO 80004-1:2023, 3.6.5]
ISO/TS 5341:2026(en)
3.1.22
nanopore
cavity with at least one dimension in the nanoscale (3.1.1), which can contain gas or liquid
[SOURCE: ISO 80004-1:2023, 3.4.3]
3.1.23
nanoporous material
solid material with nanopores (3.1.22)
[SOURCE: ISO 80004-1:2023, 3.5.1]
3.1.23.1
nanoporous membrane
membrane (3.1.21) having nanopores (3.1.22)
[SOURCE: ISO 80004-1:2023, 3.7.6]
3.1.24
nanocomposite
solid comprising a mixture of two or more phase-separated materials, one or more being nanophase (3.1.10)
Note 1 to entry: Gaseous nanophases are excluded [they are covered by nanoporous material (3.1.23)] from
nanocomposites.
Note 2 to entry: Materials with nanoscale (3.1.1) phases formed by precipitation alone are not considered to be
nanocomposite materials.
[SOURCE: ISO 80004-1:2023, 3.1.17]
3.1.25
particle
minute piece of matter with defined physical boundaries
Note 1 to entry: A physical boundary can also be described as an interface.
Note 2 to entry: This general particle definition applies to nano‐objects (3.1.3).
[SOURCE: ISO 80004-1:2023, 3.2.1]
3.1.26
agglomerate
collection of weakly or medium strongly bound particles (3.1.25) where the resulting external surface area
is similar to the sum of the surface areas of the individual components
Note 1 to entry: The forces holding an agglomerate together are weak forces, for example, van der Waals forces or
simple physical entanglement.
Note 2 to entry: Agglomerates are also termed secondary particles and the original source particles are termed
primary particles.
[SOURCE: ISO 80004-1:2023, 3.2.4]
3.1.27
aggregate
particle (3.1.25) comprising strongly bonded or fused particles where the resulting external surface area is
significantly smaller than the sum of surface areas of the individual components
Note 1 to entry: The forces holding an aggregate together are strong forces, for example, covalent or ionic bonds, or
those resulting from sintering or complex physical entanglement.
Note 2 to entry: Aggregates are also termed secondary particles and the original source particles are termed primary
particles.
ISO/TS 5341:2026(en)
[SOURCE: ISO 80004-1:2023, 3.2.5]
3.1.28
NOAA
nano-objects and their aggregates and agglomerates
material comprising nano‐objects (3.1.3), and their aggregates (3.1.27) and agglomerates (3.1.26)
Note 1 to entry: NOAA include structures with one, two or three external dimensions in the nanoscale (3.1.1), which
can be spheres, fibres, tubes and others as primary structures. NOAA can consist of individual primary structures in
the nanoscale and aggregated or agglomerated structures, including those with sizes larger than 100 nm.
[SOURCE: ISO 80004-1:2023, 3.2.6]
3.1.29
nanofoam
liquid or solid matrix, filled with a second, gaseous phase having nanoscale (3.1.1) struts and walls, or a
gaseous nanophase (3.1.10) consisting of nanoscale bubbles, or both
[SOURCE: ISO 80004-1:2023, 3.5.2]
3.1.30
film
supported or unsupported thin material that is laterally continuously connected
Note 1 to entry: The attribute “thin” is used to emphasize that the thickness of the film is much smaller than the other
two dimensions.
Note 2 to entry: A film can be freestanding.
Note 3 to entry: A film can be made of solids or liquids (e.g. liquid film).
Note 4 to entry: A film can be composed of a monomolecular layer (3.1.19) (e.g. Langmuir-Blodgett film).
[SOURCE: ISO 80004-1:2023, 3.6.1]
3.1.31
nanofilm
film (3.1.30) with thickness in the nanoscale (3.1.1)
Note 1 to entry: A nanofilm is a nanolayer (3.1.20) which can be freestanding.
Note 2 to entry: A nanofilm can be made of solids or liquids (e.g. liquid film).
Note 3 to entry: A nanofilm can be composed of a monomolecular layer (3.1.19) (e.g. Langmuir-Blodgett film).
[SOURCE: ISO 80004-1:2023, 3.7.1]
3.2 Terms used to describe the naming convention
3.2.1
target term
term that is modified using a qualifier (3.2.2)
Note 1 to entry: When the resulting definition of the target term depends its domain (subject area or delimitation), a
domain is provided in angled brackets.
3.2.2
qualifier
descriptive term or prefix applied to narrow the definition of a target term (3.2.1).
Note 1 to entry: The qualifier may result in different definition modification depending on the domain (subject area or
delimitation) of the target term. The domain of the target term is provided in angled brackets.
ISO/TS 5341:202
...



