SIST EN 300 718-2 V2.1.1:2018
(Main)Avalanche Beacons operating at 457 kHz - Transmitter-receiver systems - Part 2: Harmonised Standard for features for emergency services
General Information
- Abstract
The present document specifies technical characteristics and methods of measurements for avalanche beacons operating
at 457 kHz transmitter-receiver systems.
NOTE: The relationship between the present document and essential requirements of article 3.3g of
Directive 2014/53/EU [i.1] is given in annex A.
- Status
- Published
- Public Enquiry End Date
- 17-Dec-2017
- Publication Date
- 16-Jan-2018
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 15-Jan-2018
- Due Date
- 22-Mar-2018
- Completion Date
- 17-Jan-2018
Buy Documents
ETSI EN 300 718-2 V2.1.0 (2017-09) - Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
ETSI EN 300 718-2 V2.1.1 (2018-01) - Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
Overview
SIST EN 300 718-2 V2.1.1:2018 specifies the technical requirements and methods for measuring avalanche beacons operating at 457 kHz, commonly used by emergency services for search and rescue operations in avalanche incidents. This harmonised standard supports the essential safety and performance requirements outlined in Article 3.3g of Directive 2014/53/EU, facilitating consistent quality and interoperability across Europe. The standard covers critical features for transmitter-receiver systems to ensure reliable operation under challenging environmental conditions.
Key Topics
- Technical Characteristics: Outlines the necessary transmitter and receiver configurations, including battery, antenna, and control unit requirements to guarantee emergency performance.
- Environmental Tests: Specifies robust testing methods for drop resistance, temperature extremes, immersion, and solar radiation exposure to assure operational integrity in harsh alpine environments.
- Mechanical and Electrical Design: Engages best engineering practices for portability and attachment to the user, focusing on minimizing harmful interference and ensuring operational efficiency during rescue efforts.
- Battery and Power Management: Mandates a built-in battery check feature to indicate operational runtime under standard and extreme cold conditions, essential for search and rescue missions.
- Usability Requirements: Enforces clear operating instructions, including short-form guidance printed directly on the device casing, ensuring quick and reliable use in emergencies.
- Radio Performance: Prescribes minimum output field strength and receiver sensitivity to support effective beacon-to-beacon communication, vital for location tracking and victim recovery.
Applications
Avalanche beacons compliant with SIST EN 300 718-2 are essential tools for:
- Emergency Services: Widely adopted by professional rescuers and mountain rescue teams for fast and safe retrieval of individuals buried in avalanches.
- Outdoor and Winter Sports: Used by ski patrols, guides, and backcountry adventurers to enhance safety and support efficient self-rescue and companion-rescue scenarios.
- Disaster Preparedness: Integrated into broader accident and disaster control strategies where rapid location and rescue under snow are required.
- Compliance and Certification: Provides manufacturers and importers with a clear pathway to demonstrate conformity to European Union regulations, supporting legal market access and user trust.
Related Standards
- ETSI EN 300 718-1: Harmonised standard focusing on access to radio spectrum for avalanche beacons operating at 457 kHz.
- Directive 2014/53/EU (RED): European Radio Equipment Directive establishing essential requirements for safety, electromagnetic compatibility, and effective spectrum use.
- ETSI EG 202 730: Guidance on testing procedures, measurement uncertainties, and environmental test methods relevant to avalanche beacon performance.
- ISO 9001: Quality management systems referenced for best practice in the design and manufacture of safety equipment.
Practical Value
Adherence to SIST EN 300 718-2 V2.1.1:2018 ensures avalanche beacons for emergency services are reliable, durable, and interoperable within standardized European frameworks. Compliance strengthens rescue operation outcomes, maximizes user safety, and supports legal conformity with the Radio Equipment Directive. For manufacturers, meeting this standard is key for efficient market entry, risk management, and cultivating confidence among both professional rescuers and recreational users.
Buy Documents
ETSI EN 300 718-2 V2.1.0 (2017-09) - Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
ETSI EN 300 718-2 V2.1.1 (2018-01) - Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
Get Certified
Connect with accredited certification bodies for this standard

ANCE
Mexican certification and testing association.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
Sponsored listings
Frequently Asked Questions
SIST EN 300 718-2 V2.1.1:2018 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Avalanche Beacons operating at 457 kHz - Transmitter-receiver systems - Part 2: Harmonised Standard for features for emergency services". This standard covers: The present document specifies technical characteristics and methods of measurements for avalanche beacons operating at 457 kHz transmitter-receiver systems. NOTE: The relationship between the present document and essential requirements of article 3.3g of Directive 2014/53/EU [i.1] is given in annex A.
The present document specifies technical characteristics and methods of measurements for avalanche beacons operating at 457 kHz transmitter-receiver systems. NOTE: The relationship between the present document and essential requirements of article 3.3g of Directive 2014/53/EU [i.1] is given in annex A.
SIST EN 300 718-2 V2.1.1:2018 is classified under the following ICS (International Classification for Standards) categories: 13.200 - Accident and disaster control; 33.060.20 - Receiving and transmitting equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 718-2 V2.1.1:2018 is associated with the following European legislation: EU Directives/Regulations: 2014/53/EU, TRRTP124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 718-2 V2.1.1:2018 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
HARMONISED EUROPEAN STANDARD
Avalanche Beacons operating at 457 kHz;
Transmitter-receiver systems;
Part 2: Harmonised Standard for features
for emergency services
2 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Reference
REN/ERM-TG28-512-2
Keywords
harmonised standard, radio, safety, SAR, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
3 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Environmental conformance requirements . 8
4.2.1 General requirements . 8
4.2.2 Drop test on hard surface . 8
4.2.2.1 Description . 8
4.2.2.2 Method of measurement . 8
4.2.2.3 Requirements . 8
4.2.3 Temperature tests . 9
4.2.3.1 General . 9
4.2.3.2 Dry heat cycle . 9
4.2.3.3 Low temperature cycle . 9
4.2.3.4 Requirements . 9
4.2.4 Immersion test . 9
4.2.4.1 Method of measurement . 9
4.2.4.2 Requirements . 9
4.2.5 Solar radiation . 10
4.2.5.1 Method of measurement . 10
4.2.5.2 Requirements . 10
4.2.6 Tensile test . 10
4.2.6.1 Method of measurement . 10
4.2.6.2 Requirements . 10
4.3 Mechanical and electrical design conformance requirements . 10
4.3.1 Operational Requirements . 10
4.3.3 Maintaining the transmit mode . 10
4.3.4 Operating time . 11
4.3.5 Battery check . 11
4.3.6 Carrying system . 11
4.3.7 Operating instructions . 11
4.3.8 Short form operating instructions . 11
4.3.9 Operating and storage temperatures . 11
4.4 Radio performance requirements . 12
4.4.1 Transmitter requirements . 12
4.4.1.1 Minimum output field strength (H-field) . 12
4.4.2 Receiver requirements . 12
4.4.2.1 Changes in the received signal . 12
4.4.2.1.1 Definition. 12
4.4.2.1.2 Requirement . 12
5 Test conditions, power sources and ambient temperatures . 12
5.1 Normal and extreme test conditions . 12
5.2 External test power source. 12
5.3 Normal test conditions . 12
5.3.1 Normal temperature and humidity . 12
5.3.2 Normal test voltage . 13
5.4 Extreme test conditions . 13
5.4.1 Extreme temperatures . 13
ETSI
4 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
5.4.2 Extreme test voltages . 13
5.4.2.1 General requirement . 13
5.4.2.2 Procedure for tests at extreme temperatures . 13
5.5 Measurement uncertainty . 13
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 15
Annex B (normative): Simulated solar radiation source . 16
Annex C (informative): Change History . 17
History . 18
ETSI
5 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM) and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document implements requirements laid down in Commission Decision 2001/148/EC [i.3].
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
6 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
7 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
1 Scope
The present document specifies technical characteristics and methods of measurements for avalanche beacons operating
at 457 kHz transmitter-receiver systems.
NOTE: The relationship between the present document and essential requirements of article 3.3g of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 718-1 (V2.1.0) (09-2017): "Avalanche Beacons operating at 457 kHz; Transmitter-
receiver systems; Part 1: Harmonised standard for access to radio spectrum".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.3] Commission Decision 2001/148/EC of 21 February 2001 on the application of Article 3(3)(e) of
Directive 1999/5/EC to avalanche beacons.
[i.4] EN 60068-2-5-2011: "Environmental testing. Tests. Test Sa. Simulated solar radiation at ground
level and guidance for solar radiation testing".
[i.5] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
ETSI
8 Draft ETSI EN 300 718-2 V2.1.0 (2017-09)
3 Definitions, symbols and abbreviations
For the purposes of the present document, the terms and definitions, symbols and abbreviations given in ETSI
EN 300 718-1 [1], clause 3, apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical
requirements of the present document which are identified as applicable in annex A at all times when operating within
the boundary limits of the declared operational environmental profile.
4.2 Environmental conformance requirements
4.2.1 General requirements
E
...
HARMONISED EUROPEAN STANDARD
Avalanche Beacons operating at 457 kHz;
Transmitter-receiver systems;
Part 2: Harmonised Standard for features
for emergency services
2 ETSI EN 300 718-2 V2.1.1 (2018-01)
Reference
REN/ERM-TG28-512-2
Keywords
harmonised standard, radio, safety, SAR, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
3 ETSI EN 300 718-2 V2.1.1 (2018-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions, symbols and abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Environmental conformance requirements . 8
4.2.1 General requirements . 8
4.2.2 Drop test on hard surface . 8
4.2.2.1 Description . 8
4.2.2.2 Method of measurement . 8
4.2.2.3 Requirements . 8
4.2.3 Temperature tests . 9
4.2.3.1 General . 9
4.2.3.2 Dry heat cycle . 9
4.2.3.3 Low temperature cycle . 9
4.2.3.4 Requirements . 9
4.2.4 Immersion test . 9
4.2.4.1 Method of measurement . 9
4.2.4.2 Requirements . 9
4.2.5 Solar radiation . 10
4.2.5.1 Method of measurement . 10
4.2.5.2 Requirements . 10
4.2.6 Tensile test . 10
4.2.6.1 Method of measurement . 10
4.2.6.2 Requirements . 10
4.3 Mechanical and electrical design conformance requirements . 10
4.3.1 Operational Requirements . 10
4.3.2 Maintaining the transmit mode . 10
4.3.3 Operating time . 11
4.3.4 Battery check . 11
4.3.5 Carrying system . 11
4.3.6 Operating instructions . 11
4.3.7 Short form operating instructions . 11
4.3.8 Operating and storage temperatures . 11
4.4 Radio performance requirements . 12
4.4.1 Transmitter requirements . 12
4.4.1.1 Minimum output field strength (H-field) . 12
4.4.2 Receiver requirements . 12
4.4.2.1 Changes in the received signal . 12
4.4.2.1.1 Definition. 12
4.4.2.1.2 Requirement . 12
5 Test conditions, power sources and ambient temperatures . 12
5.1 Normal and extreme test conditions . 12
5.2 External test power source. 12
5.3 Normal test conditions . 12
5.3.1 Normal temperature and humidity . 12
5.3.2 Normal test voltage . 13
5.4 Extreme test conditions . 13
5.4.1 Extreme temperatures . 13
ETSI
4 ETSI EN 300 718-2 V2.1.1 (2018-01)
5.4.2 Extreme test voltages . 13
5.4.2.1 General requirement . 13
5.4.2.2 Procedure for tests at extreme temperatures . 13
5.5 Measurement uncertainty . 13
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 15
Annex B (normative): Simulated solar radiation source . 16
Annex C (informative): Change history . 17
History . 18
ETSI
5 ETSI EN 300 718-2 V2.1.1 (2018-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document implements requirements laid down in Commission Decision 2001/148/EC [i.3].
The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates
Date of adoption of this EN: 18 December 2017
Date of latest announcement of this EN (doa): 31 March 2018
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2018
Date of withdrawal of any conflicting National Standard (dow): 30 September 2019
ETSI
6 ETSI EN 300 718-2 V2.1.1 (2018-01)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
7 ETSI EN 300 718-2 V2.1.1 (2018-01)
1 Scope
The present document specifies technical characteristics and methods of measurements for avalanche beacons operating
at 457 kHz transmitter-receiver systems.
NOTE: The relationship between the present document and essential requirements of article 3.3g of
Directive 2014/53/EU [i.1] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 718-1 (V2.1.1) (01-2018): "Avalanche Beacons operating at 457 kHz; Transmitter-
receiver systems; Part 1: Harmonised standard for access to radio spectrum".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.3] Commission Decision 2001/148/EC of 21 February 2001 on the application of Article 3(3)(e) of
Directive 1999/5/EC to avalanche beacons.
[i.4] EN 60068-2-5-2011: "Environmental testing. Tests. Test Sa. Simulated solar radiation at ground
level and guidance for solar radiation testing".
[i.5] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
ETSI
8 ETSI EN 300 718-2 V2.1.1 (2018-01)
3 Definitions, symbols and abbreviations
For the purposes of the present document, the terms and definitions, symbols and abbreviations given in ETSI
EN 300 718-1 [1], clause 3, apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical
requirements of the present document which are identified as applicable in annex A at all times when operating within
the boundary limits of the declared operational environmental profile.
4.2 Environmental conformance requirements
4.2.1 General requirements
Environmental tests shall be carried out before tests of the same equipment in respect to the other requirements of the
present document are performed. The following tests shall be carried out in
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Avalanche Beacons operating at 457 kHz - Transmitter-receiver systems - Part 2: Harmonised Standard for features for emergency services33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipment13.200NDWDVWURIAccident and disaster controlICS:Ta slovenski standard je istoveten z:ETSI EN 300 718-2 V2.1.1 (2018-01)SIST EN 300 718-2 V2.1.1:2018en01-marec-2018SIST EN 300 718-2 V2.1.1:2018SLOVENSKI
STANDARD
=====ETSI EN 300 718-2 V2.1.1 (2018-01) Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services
HARMONISED EUROPEAN STANDARD SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 2 ===oeference=REN/ERM-TG28-512-2 heywords=harmonised standard, radio, safety, SAR, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE= Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 3 Contents fntellectual=mroperty=oights=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=o coreword=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=o jodal=verbs=terminology=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=p k=pcope=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q l=oeferences=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q lhk=kormative=references=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q lhl=fnformative=references=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=q m=aefinitionsf=symbols=and=abbreviations=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4=qechnical=requirements=specifications=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hk=bnvironmental=profile=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hl=bnvironmental=conformance=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhk=deneral=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhl=arop=test=on=hard=surface=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhlhk=aescription=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhlhl=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhlhm=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=r 4hlhm=qemperature=tests=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmhk=deneral=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmhl=ary=heat=cycle=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmhm=iow=temperature=cycle=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlhmh4=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlh4=fmmersion=test=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlh4hk=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlh4hl=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=s 4hlho=polar=radiation=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhohk=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhohl=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhp=qensile=test=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhphk=jethod=of=measurement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hlhphl=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hm=jechanical=and=electrical=design=conformance=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hmhk=lperational=oequirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hmhl=jaintaining=the=transmit=mode=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kj 4hmhm=lperating=time=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmh4=Battery=check=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmho=Carrying=system=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmhp=lperating=instructions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmhq=phort=form=operating=instructions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4hmhr=lperating=and=storage=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kk 4h4=oadio=performance=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hk=qransmitter=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hkhk=jinimum=output=field=strength=begfieldc=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hl=oeceiver=requirements=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hlhk=Changes=in=the=received=signal=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hlhkhk=aefinitionhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl 4h4hlhkhl=oequirement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl o=qest=conditionsf=power=sources=and=ambient=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohk=kormal=and=extreme=test=conditions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohl=bxternal=test=power=sourcehhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohm=kormal=test=conditions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohmhk=kormal=temperature=and=humidity=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kl ohmhl=kormal=test=voltage=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4=bxtreme=test=conditions=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4hk=bxtreme=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 4 oh4hl=bxtreme=test=voltages=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4hlhk=deneral=requirement=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oh4hlhl=mrocedure=for=tests=at=extreme=temperatures=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km oho=jeasurement=uncertainty=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=km Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 15 Annex B (normative): Simulated solar radiation source . 16 Annex C (informative): Change history . 17 eistory=hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh=kr == SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 5 Intellectual Property Rights Essential patents fmos=essential=or=potentially=essential=to=the=present=document=may=have=been=declared=to=bqpfh=qhe=information=pertaining=to=these=essential=fmosf=if=anyf=is=publicly=available=for=ETSI members and non-membersf=and=can=be=found=in=bqpf=po=jjj=mk4t="Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards"f=which=is=available=from=the=bqpf=pecretariath=iatest=updates=are=available=on=the=bqpf=teb=server=bhttpstiiiprhetsihorgich=mursuant=to=the=bqpf=fmo=molicyf=no=investigationf=including=fmo=searchesf=has=been=carried=out=by=bqpfh=ko=guarantee=can=be=given=as=to=the=existence=of=other=fmos=not=referenced=in=bqpf=po=jjj=mk4=bor=the=updates=on=the=bqpf=teb=serverc=which=aref=or=may=bef=or=may=becomef=essential=to=the=present=documenth=Trademarks qhe=present=document=may=include=trademarks=andior=tradenames=which=are=asserted=andior=registered=by=their=ownersh=bqpf=claims=no=ownership=of=these=except=for=any=which=are=indicated=as=being=the=property=of=bqpff=and=conveys=no=right=to=use=or=reproduce=any=trademark=andior=tradenameh=jention=of=those=trademarks=in=the=present=document=does=not=constitute=an=endorsement=by=bqpf=of=productsf=services=or=organizations=associated=with=those=trademarksh=Foreword qhis=earmonised=buropean=ptandard=bbkc=has=been=produced=by=bqpf=qechnical=Committee=blectromagnetic=compatibility=and=oadio=spectrum=jatters=bbojch=qhe=present=document=has=been=prepared=under=the=Commissionas=standardisation=request=Cbljkoc=omqp=final=xihlz=to=provide=one=voluntary=means=of=conforming=to=the=essential=requirements=of=airective=ljk4iomibr=on=the=harmonisation=of=the=laws=of=the=jember=ptates=relating=to=the=making=available=on=the=market=of=radio=equipment=and=repealing=airective=ksssioibC=xihkzh=lnce=the=present=document=is=cited=in=the=lfficial=gournal=of=the=buropean=rnion=under=that=airectivef=compliance=with=the=normative=clauses=of=the=present=document=given=in=table=Ahk=confersf=within=the=limits=of=the=scope=of=the=present=documentf=a=presumption=of=conformity=with=the=corresponding=essential=requirements=of=that=airective=and=associated=bcqA=regulationsh=qhe=present=document=implements=requirements=laid=down=in=Commission=aecision=ljjkik4ribC=xihmzh=qhe=present=document=is=part=l=of=a=multigpart=deliverableh=cull=details=of=the=entire=series=can=be=found=in=part=k=xkzh==National transposition dates aate=of=adoption=of=this=bkt=kr=aecember=ljkq=aate=of=latest=announcement=of=this=bk=bdoact=mk=jarch=ljkr=aate=of=latest=publication=of=new=kational=ptandard=or=endorsement=of=this=bk=bdopiect==mj=peptember=ljkr=aate=of=withdrawal=of=any=conflicting=kational=ptandard=bdowct=mj=peptember=ljks==SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 6 Modal verbs terminology fn=the=present=document="shall"f="shall not"f="should"f="should not"f="may"f="need not"f="will"f="will not"f="can"=and="cannot"=are=to=be=interpreted=as=described=in=clause=mhl=of=the=bqpf=arafting=oules=bserbal=forms=for=the=expression=of=provisionsch="must"=and="must not"=are=NOT=allowed=in=bqpf=deliverables=except=when=used=in=direct=citationh== SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 7 1 Scope qhe=present=document=specifies=technical=characteristics=and=methods=of=measurements=for=avalanche=beacons=operating=at=4oq=kez=transmittergreceiver=systemsh=klqbt=qhe=relationship=between=the=present=document=and=essential=requirements=of=article=mhmg=of=airective=ljk4iomibr=xihkz=is=given=in=annex=Ah=2 References
2.1 Normative references oeferences=are=specificf=identified=by=date=of=publication=andior=edition=number=or=version=numberh=lnly=the=cited=version=appliesh=oeferenced=documents=which=are=not=found=to=be=publicly=available=in=the=expected=location=might=be=found=at=httpstiidocboxhetsihorgioeferenceih=klqbt=thile=any=hyperlinks=included=in=this=clause=were=valid=at=the=time=of=publicationf=bqpf=cannot=guarantee=their=long=term=validityh=qhe=following=referenced=documents=are=necessary=for=the=application=of=the=present=documenth=xkz=bqpf=bk=mjj=qkrgk=bslhkhkc=bjkgljkrct="Avalanche=Beacons=operating=at=4oq=kez;=qransmittergreceiver=systems;=mart=kt=earmonised=standard=for=access=to=radio=spectrum"h=2.2 Informative references oeferences=are=either=specific=bidentified=by=date=of=publication=andior=edition=number=or=version=numberc=or=nongspecifich=cor=specific=referencesf=only=the=cited=version=appliesh=cor=nongspecific=referencesf=the=latest=version=of=the=referenced=document=bincluding=any=amendmentsc=appliesh=klqbt=thile=any=hyperlinks=included=in=this=clause=were=valid=at=the=time=of=publicationf=bqpf=cannot=guarantee=their=long=term=validityh=qhe=following=referenced=documents=are=not=necessary=for=the=application=of=the=present=document=but=they=assist=the=user=with=regard=to=a=particular=subject=areah=xihkz=airective=ljk4iomibr=of=the=buropean=marliament=and=of=the=Council=of=kp=April=ljk4=on=the=harmonisation=of=the=laws=of=the=jember=ptates=relating=to=the=making=available=on=the=market=of=radio=equipment=and=repealing=airective=ksssioibCh=xihlz=Commission=fmplementing=aecision=Cbljkoc=omqp=final=of=4hrhljko=on=a=standardisation=request=to=the=buropean=Committee=for=blectrotechnical=ptandardisation=and=to=the=buropean=qelecommunications=ptandards=fnstitute=as=regards=radio=equipment=in=support=of=airective=ljk4iomibr=of=the=buropean=marliament=and=of=the=Councilh=xihmz=Commission=aecision=ljjkik4ribC=of=lk=cebruary=ljjk=on=the=application=of=Article=mbmcbec=of=airective=ksssioibC=to=avalanche=beaconsh=xih4z=bk=pjjprglgogljkkt="bnvironmental=testingh=qestsh=qest=pah=pimulated=solar=radiation=at=ground=level=and=guidance=for=solar=radiation=testing"h=xihoz=bqpf=qo=kjj=jlr=ball=partsct="blectromagnetic=compatibility=and=oadio=spectrum=jatters=bbojc;=rncertainties=in=the=measurement=of=mobile=radio=equipment=characteristics"h=SIST EN 300 718-2 V2.1.1:2018
ETSI ETSI EN 300 718-2 V2.1.1 (2018-01) 8 3 Definitions, symbols and abbreviations cor=the=purposes=of=the=present=documentf=the=terms=and=definitionsf=symbols=and=abbreviations=given=in=bqpf=bk=mjj=qkrgk=xkzf=clause=mf=applyh=4 Technical requirements specifications 4.1 Environmental profile qhe=technical=requirements=of=the=present=document=apply=under=the=environmental=profile=for=operation=of=the=equipmentf=which=shall=be=declared=by=the=manufacturerh=qhe=equipment=shall=comply=with=all=the=technical=requirements=of=the=present=document=which=are=identified=as=applicable=in
...











