SIST EN 300 718-2 V1.1.1:2001

SLOVENSKI STANDARD
01-december-2001
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) -
Lavinske žolne - Oddajno-sprejemni sistemi - 2. del: Harmonizirani evropski
standard (EN), ki zajema bistvene zahteve člena 3.2 direktive o radijski in
telekomunikacijski terminalski opremi (R&TTE)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons;
Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of
article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: ETSI EN 300 718-2 V1.1.1 (2001-05)
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Avalanche Beacons;
Transmitter-receiver systems;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive

2 ETSI EN 300 718-2 V1.1.1 (2001-05)
Reference
REN/ERM-RP08-0409-2
Keywords
Radio, regulation, safety, SAR, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 94 4200 Fax: +33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI
3 ETSI EN 300 718-2 V1.1.1 (2001-05)
Contents
Intellectual Property Rights .4
Foreword.4
Introduction.5
1 Scope.7
2 References.7
3 Definitions, abbreviations and symbols .7
3.1 Definitions . 7
3.2 Abbreviations. 8
3.3 Symbols . 8
4 Technical conformance requirements specifications .8
4.1 Environmental profile. 8
4.2 Operating frequency. 8
4.3 Modulation and carrier keying. 8
4.3.1 Definition . 8
4.3.2 Limits. 8
4.3.3 Conformance . 8
4.4 Frequency error. 8
4.4.1 Definition . 8
4.4.2 Limits. 9
4.4.3 Conformance . 9
4.5 Maximum output field strength (H-field) . 9
4.5.1 Definition . 9
4.5.2 Limits. 9
4.5.3 Conformance . 9
4.6 Transmitter spurious emissions. 9
4.6.1 Definition . 9
4.6.2 Radiated H-field. 9
4.6.2.1 Limits. 9
4.6.2.2 Conformance. 9
4.6.3 Effective radiated power . 9
4.6.3.1 Limits. 9
4.6.3.2 Conformance. 9
4.7 Receiver spurious emissions . 10
4.7.1 Definition . 10
4.7.2 Radiated H-field. 10
4.7.2.1 Limits. 10
4.7.2.2 Conformance. 10
4.7.3 Effective radiated power . 10
4.7.3.1 Limits. 10
4.7.3.2 Conformance. 10
5 Conditions for compliance with the requirements.10
5.1 General . 10
5.1.1 Environment. 10
5.1.2 Accessories. 10
6 Measurement uncertainties.11
Annex A (normative): The EN Requirements Table (EN-RT).12
History .13
ETSI
4 ETSI EN 300 718-2 V1.1.1 (2001-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering the Avalanche Beacons; Transmitter-receiver
systems, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC laying down a procedure for the provision of information in the field of technical
standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
National transposition dates
Date of adoption of this EN: 18 May 2001
Date of latest announcement of this EN (doa): 31 August 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2002
Date of withdrawal of any conflicting National Standard (dow): 28 February 2003
ETSI
5 ETSI EN 300 718-2 V1.1.1 (2001-05)
Introduction
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure.
The modular structure is shown in figure 1.
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Interworking via the network*
equipment
3.3a class or type
Interworking with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipement type
Radio Product EMC
New single multi-part standard
3.1b
EMC
Generic and base standards also notified under EMC Directive
New standard for Health for radio
(if needed)
3.1a
Safety
Standards also notified under LVD Directive
(incl acoustic safety if needed)
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive
The left hand edge of the figure shows the different clauses of article 3 of the Directive.
For article 3.3 various horizontal boxes are shown. Their dotted lines indicate that essential requirements in these areas
have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are
applicable, they will justify individual standards whose scope is likely to be specified by function or interface type.
ETSI
...