Abstract

This document recommends and describes a transparent method and range of values for classifying and
comparing forms of graphene-related 2D materials (GR2M) regardless of production method or feedstock materials. This document also provides the basis for material technical data sheets which provide a framework  which can be used equally by producers, users, and regulators. The described technical data sheets contain an  agreed upon minimum set of relevant material characteristics, properties, and identified recommended methods  for testing, that have been deemed most relevant for the commercial application of GR2M. This document also  establishes a syntax to be used for the consistent naming and description for GR2M.

Status
Not Published
Public Enquiry End Date
14-Jan-2027
Technical Committee
I13 - Imaginarni 13
Current Stage
5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
Start Date
17-Nov-2026
Due Date
06-Apr-2027

Buy Documents

Draft

kSIST-TS FprCEN ISO/TS 9651:2027 - BARVE

English language (27 pages)
Preview
Preview
e-Library read for
×1 day

kSIST-TS FprCEN ISO/TS 9651:2027 is SIST’s version of ISO/TS 9651 for nanotechnologies. It gives a classification framework for graphene-related 2D materials (GR2M) so producers, users, and regulators can describe and compare them in a common way. The document covers sheet and particle forms, the characteristic values to report, the measurement methods to use, and a syntax for consistent naming and description.

What does kSIST-TS FprCEN ISO/TS 9651:2027 specify?

kSIST-TS FprCEN ISO/TS 9651:2027 specifies a transparent way to classify GR2M for commercial applications, regardless of production method or feedstock material. It also supports technical data sheets by identifying the minimum material characteristics, recommended test methods, and a consistent description syntax.

Clause 1 sets out the scope and the five elements of the framework: relevant characteristics, measurement methods, value ranges where applicable, naming syntax, and a technical data sheet template. Clause 4 covers sheet-form GR2M, Clause 5 covers particle-form GR2M, Clause 6 gives the syntax for material description, and Clause 7 addresses reporting.

Annex A is normative and shows the classification framework as a single overview of the characteristic values used in the document.

What are the key requirements of kSIST-TS FprCEN ISO/TS 9651:2027?

kSIST-TS FprCEN ISO/TS 9651:2027 organizes GR2M classification around self-reported production information, form, composition, structure, and performance-related measurements. In practice, it helps a supplier or buyer build a data sheet that can be compared across laboratories and suppliers.

Classification basis and reporting

  • Production method and source material - Clauses 4.1 and 5.1 ask the producer to report the production method and source material in general terms without disclosing confidential details. This matters because the same GR2M can be made from different feedstocks or by different routes, and those details affect how the material is described.
  • Material form and substrate - Clauses 4.1.3 and 5.1.3 require the form to be identified by visual observation, with sheet form and particle form treated separately. The substrate, transfer process, or dispersion medium should also be stated where relevant, because downstream handling and testing depend on it.
  • Technical data sheet content - Clause 7 defines the minimum reporting content for sheets and particle forms. The document expects company and product identification, product description, production details, test methods, and measured values, so users can read the data sheet without needing extra context.

Sheet-form GR2M

  • Sheet size and covered area - Clause 4.2.1 covers sheet size, while Clause 4.2.2 covers area coverage by single-layer, multilayer, and defective areas. This is important for films and coatings because surface continuity and layer coverage often determine the material’s function.
  • Surface condition and disorder - Clause 4.2.3 covers surface residue, and Clauses 4.2.5 and 4.2.6 use Raman spectroscopy to report the D/G area ratio and the FWHM of the G and 2D peaks. In practice, these measures help users judge contamination, disorder, and sample quality.
  • Electrical and structural properties - Clauses 4.2.7 to 4.2.10 cover mobility, sheet resistance, structural defects, and rotational layer alignment. These values matter when the GR2M is used in electronic or conductive applications, because they indicate charge transport, defect level, and layer orientation.

Particle-form GR2M

  • Particle structure and size - Clause 5.2.3 covers z-axis dimensions, Clause 5.2.4 covers layers of carbon atoms, and Clauses 5.2.6 and 5.2.7 cover lateral particle size and particle aspect ratio. These measurements help connect thickness and lateral dimensions to the intended use of powders, dispersions, or master batches.
  • Composition and cleanliness - Clauses 5.2.9 to 5.2.12 cover elemental composition, oxygen content, impurities, and functionalization. This matters because the chemistry of the material can change dispersion behavior, reactivity, and end-use performance.
  • Dispersion behavior and bulk properties - Clauses 5.2.8, 5.2.13, 5.2.15, and 5.2.16 cover tap density, zeta potential, specific surface area, and crystallinity. These are practical control values for powders and dispersions, especially when a user needs to compare batch consistency or processing behavior.

Syntax and framework

  • Consistent naming - Clause 6 recommends a fixed syntax for one-phrase material descriptions. This gives producers and users a common way to write short product descriptions that still capture the essential features of the material.
  • Overall classification map - Annex A presents the framework as 19 characterization values. This helps readers see how the document brings production, form, structure, composition, and performance into one scheme.

What terms does kSIST-TS FprCEN ISO/TS 9651:2027 define?

kSIST-TS FprCEN ISO/TS 9651:2027 defines the key vocabulary used to classify GR2M and to keep measurements comparable.

  • Graphene-related 2D material (GR2M) - A carbon-based 2D material with one to 10 layers, including graphene, graphene oxide, reduced graphene oxide, and functionalized variants.
  • Sheet - A 2D material typically placed on a substrate with extended lateral dimensions.
  • Flake - A distinct planar particle with thickness much smaller than its lateral size.
  • Particle - A small piece of matter with defined physical boundaries.
  • Functionalization - An intentional chemical change to the surface of the material.
  • Lateral size - The lateral dimensions of a 2D material flake.
  • Level of disorder - A Raman-based measure linked to the D and G peak ratio, used to indicate the amount and type of defects.

Who uses kSIST-TS FprCEN ISO/TS 9651:2027?

kSIST-TS FprCEN ISO/TS 9651:2027 is aimed at graphene producers, material users, regulators, and anyone preparing or checking technical data sheets for commercial GR2M. It is also relevant to laboratories that perform Raman spectroscopy, microscopy, electrical testing, XPS, TEM, AFM, and related characterization work.

In practice, producers use it to label products consistently, buyers use it to compare materials from different suppliers, and regulators use it to support transparent registration or reporting. Quality teams can use it to check that a data sheet contains the minimum set of material information and the method used for each reported value.

Which standards are used with kSIST-TS FprCEN ISO/TS 9651:2027?

kSIST-TS FprCEN ISO/TS 9651:2027 points to these companion standards for the test methods it names:

  • ISO/TS 21356-1 - structural characterization of graphene from powders and dispersions.
  • ISO/TS 21356-2 - structural characterization of graphene sheets on a substrate.
  • ISO 23359 - chemical characterization for graphene in powders and suspensions.
  • ISO 9277 - BET method for specific surface area.
  • ISO 13099-1 and ISO 13099-2 - zeta-potential measurement methods.
  • ISO/TR 19997 - good practice guidance for zeta-potential measurement.
  • ISO 21363 - particle size and shape distributions by TEM.
  • ISO 80004-13 and ISO 80004-1 - vocabulary used for graphene-related 2D materials and core nanotechnology terms.
  • IEC/TS 62607-6-4, IEC/TS 62607-6-11, IEC/TS 62607-6-17, IEC/TS 62607-6-19, IEC/TS 62607-6-21, and IEC/TS 62607-6-35 - graphene measurement methods for surface conductance, defect density, spatial order, elemental composition, C/O ratio, and density-related testing.
  • ASTM E1131-20, ASTM D5187-21, and ASTM D7481-18 - thermogravimetric compositional analysis, crystallinity by XRD, and loose/tapped bulk density methods.
  • EN 13925-1:2003 and JIS K 0131:1996 - X-ray diffraction guidance used as supporting methods in the document.

What does the kSIST-TS FprCEN ISO/TS 9651:2027 document contain?

kSIST-TS FprCEN ISO/TS 9651:2027 contains the classification framework, the term definitions, the sheet-form and particle-form measurement guidance, the naming syntax, and reporting templates. It also includes a normative annex that summarizes the classification structure in one figure.

The document gives test-oriented content rather than production instructions. It describes which characteristics to measure, which methods are recommended or acceptable, and what to report for comparisons across suppliers and laboratories.

Figures 1 and 2 show the syntax schematics for sheet-form and particle-form GR2M. Tables 1 to 3 provide a technical data sheet template for sheet materials, and Tables 4 to 6 provide the corresponding template for particle-form materials, including spaces for graphs and images.

Buy Documents

Draft

kSIST-TS FprCEN ISO/TS 9651:2027 - BARVE

English language (27 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

kSIST-TS FprCEN ISO/TS 9651:2027 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Nanotechnologies - Classification framework for graphene‐related 2D materials (ISO/TS 9651:2025)". This standard covers: This document recommends and describes a transparent method and range of values for classifying and comparing forms of graphene-related 2D materials (GR2M) regardless of production method or feedstock materials. This document also provides the basis for material technical data sheets which provide a framework which can be used equally by producers, users, and regulators. The described technical data sheets contain an agreed upon minimum set of relevant material characteristics, properties, and identified recommended methods for testing, that have been deemed most relevant for the commercial application of GR2M. This document also establishes a syntax to be used for the consistent naming and description for GR2M.

This document recommends and describes a transparent method and range of values for classifying and comparing forms of graphene-related 2D materials (GR2M) regardless of production method or feedstock materials. This document also provides the basis for material technical data sheets which provide a framework which can be used equally by producers, users, and regulators. The described technical data sheets contain an agreed upon minimum set of relevant material characteristics, properties, and identified recommended methods for testing, that have been deemed most relevant for the commercial application of GR2M. This document also establishes a syntax to be used for the consistent naming and description for GR2M.

kSIST-TS FprCEN ISO/TS 9651:2027 is classified under the following ICS (International Classification for Standards) categories: 07.120 - Nanotechnologies. The ICS classification helps identify the subject area and facilitates finding related standards.

kSIST-TS FprCEN ISO/TS 9651:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2027
Nanotehnologije - Okvir za razvrščanje 2D-materialov, povezanih z grafenom
(ISO/TS 9651:2025)
Nanotechnologies - Classification framework for graphene‐related 2D materials (ISO/TS
9651:2025)
Nanotechnologien - Klassifizierungsrahmen für Graphen-bezogene 2D-Materialien
(ISO/TS 9651:2025)
Nanotechnologies - Cadre de classification pour les matériaux bidimensionnels similaires
au graphène (ISO/TS 9651:2025)
Ta slovenski standard je istoveten z: FprCEN ISO/TS 9651
ICS:
07.120 Nanotehnologije Nanotechnologies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical
Specification
ISO/TS 9651
First edition
Nanotechnologies — Classification
2025-07
framework for graphene‐related 2D
materials
Nanotechnologies — Cadre de classification pour les matériaux
bidimensionnels similaires au graphène
Reference number
ISO/TS 9651:2025(en) © ISO 2025

ISO/TS 9651:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 9651:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3  Terms and definitions . 1
4 Sheet‐form graphene‐related 2D materials . 3
4.1 General .3
4.1.1 Production method .3
4.1.2 Source material .3
4.1.3 Material form and substrate .3
4.2 Characteristics and measurement methods .4
4.2.1 Sheet size .4
4.2.2 Covered area .4
4.2.3 Surface residue.4
4.2.4 Flake grain size .5
4.2.5 A /A peak ratio .5
D G
4.2.6 Full width at half maximum (FWHM) of the G and 2D peaks .6
4.2.7 Mobility .6
4.2.8 Sheet resistance .6
4.2.9 Structural defects .7
4.2.10 Rotational layer alignment .7
5 Particle‐form graphene‐related 2D materials . 7
5.1 General .7
5.1.1 Production method .7
5.1.2 Source material .8
5.1.3 Material form and substrate .8
5.2 Characteristics and measurement methods .9
5.2.1 sp bonded carbon .9
5.2.2 Structural defects .9
5.2.3 Z-Axis dimensions .9
5.2.4 Layers of carbon atoms .10
5.2.5 Particle shape .10
5.2.6 Lateral particle size .11
5.2.7 Particle aspect ratio .11
5.2.8 Tap density .11
5.2.9 Elemental composition . 12
5.2.10 Oxygen content . 12
5.2.11 Impurities . 12
5.2.12 Functionalization . 12
5.2.13 Zeta potential . 13
5.2.14 Rotational layer alignment . 13
5.2.15 Specific surface area . 13
5.2.16 Crystallinity .14
6 Syntax for material description. 14
7 Reporting .15
Annex A (normative)  Graphene-related 2D material classification framework . 19
Bibliography .21

iii
ISO/TS 9651:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 229 Nanotechnologies.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
ISO/TS 9651:2025(en)
Introduction
This document aims to provide commercial graphene producers and users with a standardized approach
to classifying graphene-related 2D materials. It outlines a transparent methodology for categorizing these
materials in any form, regardless of production methods or source materials. This approach facilitates
accurate and straightforward comparisons between materials from different suppliers. Additionally, the
document serves as a foundation for material specification data sheets, proposing a minimum set of relevant
data that can be consistently used by producers, users, and regulators. Material characteristics deemed
most critical for commercial applications—such as layer count, thickness, lateral flake size, disorder level,
and specific surface area—can be identified using standard testing methods and documented in material
data sheets.
The framework is primarily intended to support the creation and use of technical data sheets for specific
forms of graphene-related 2D materials. It is not designed to prescribe production procedures or quality
control testing processes, although some of the described test methods can serve as supporting techniques
for those purposes.
Establishing a systematic classification framework for graphene-related 2D materials is essential for
several key reasons. First, it ensures consistent and reliable regulation and registration processes,
fostering transparency and trust in the market for both producers and users. Second, it enables a thorough
understanding and quantification of material properties, forms, and contaminants. Finally, the adoption
of universal standardized testing methods is critical for enabling easy, quantitative comparisons of data
generated by different laboratories and users globally. This systematic approach will significantly advance
the responsible development and use of graphene-related 2D materials.
It is also important to note that certain test methods are possibly not suitable for all forms of graphene-
related 2D materials. When employing standardized testing methods, it is beneficial to provide multiple
measurement techniques for evaluating different properties. However, these methods can yield varying
results for the same sample due to differences in how each technique assesses specific aspects of the
material.
NOTE This document is derived from Reference [25] use of which has been licensed to ISO by the Graphene
Council (https://www.thegraphenecouncil.org).

v
Technical Specification ISO/TS 9651:2025(en)
Nanotechnologies — Classification framework for graphene-
related 2D materials
1 Scope
This document specifies the characteristics and their respective measurement methods of graphene-related
2D materials in sheet and particle forms for commercial applications with the aim of classification of the
materials. The classification framework consists of the following elements:
a) relevant material characteristics for commercial use;
b) identification of applicable measurement methods;
c) a range of the characteristic measured values when applicable;
d) syntax to guide consistent naming and descriptions;
e) an applicable technical data sheet template.
2 Normative references
There are no normative references in this document.
3  Terms and definitions
For the purposes of this document, the following terms and definitions apply:
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
graphene‐related 2D material
GR2M
DEPRECATED: graphene-based material, graphene-material
carbon-based two-dimensional material consisting of one to 10 layers, including graphene, graphene oxide,
reduced graphene oxide, and functionalized variations thereof
Note 1 to entry: This includes bilayer graphene, trilayer graphene and few-layer graphene.
Note 2 to entry: The terms graphene-based material and graphene-material are deprecated here. They have been used
to describe materials other than graphene, such as graphene oxide.
Note 3 to entry: "Graphene-related 2D material" is defined in contrast with graphene-based and GR2M-based.
[SOURCE: ISO/TS 80004-13, 3.1.1.2]
3.2
sheet
2D material typically situated upon a substrate, with extended lateral dimensions at the micro to macroscale
[SOURCE: ISO/TS 80004-13, 3.1.1.4]

ISO/TS 9651:2025(en)
3.3
flake
distinct particle of planar morphology, consisting of 1 or more layers, with a nanoscale thickness that is
significantly less than its lateral dimensions.
[SOURCE: ISO/TS 80004-13, 3.1.1.3]
3.4
particle
minute piece of matter with defined physical boundaries
Note 1 to entry: A physical boundary can also be described as an interface.
Note 2 to entry: This general particle definition applies to nano-objects.
[SOURCE: ISO 80004-1, 3.1.1]
3.5
coating
adherent surface layer
Note 1 to entry: A coating can consist of multiple layers.
Note 2 to entry: A coating is always attached to a substrate
[SOURCE: ISO 4618:2023, 2.244]
3.6
film
supported or unsupported thin material that is laterally continuously connected
Note 1 to entry: The attribute “thin” is used to emphasize that the thickness of the film is much smaller than the other
two dimensions.
Note 2 to entry: A film can be freestanding.
Note 3 to entry: A film can be made of solids or liquids (e.g. liquid film).
Note 4 to entry: A film can be composed of a monomolecular layer (e.g. Langmuir-Blodgett film).
[SOURCE: ISO/TS 80004-1, 3.1.1]
3.7
functionalization
process that intentionally alters the surface chemical properties through a distinct chemical
Note 1 to entry: functionalized material should then be referred to as "functionalized X", where X refers to the material
such as graphene, graphene nanoplatelet, etc.
[SOURCE: ISO/TS 80004-13, 3.1.1.17]
3.8
lateral size
<2D material> lateral dimensions of a 2D material flake
Note 1 to entry: If the flake is approximately circular, then this is typically measured using an equivalent circular
diameter or if not via x, y measurements along and perpendicular to the longest side.
[SOURCE: ISO/TS 80004-13:2024, 3.4.1.15]

ISO/TS 9651:2025(en)
3.9
orientation
direction of crystal which is represented by crystal index
Note 1 to entry: During TEM imaging, it is often useful to have a crystalline specimen aligned such that a specific (low
index) zone axis is parallel, or nearly parallel, to the beam direction optical axis.
[SOURCE: ISO 29301:2023, 3.5]
3.10
level of disorder
quantification of the disorder present in a GR2M given by the ratio of the
Raman D peak and G peak intensities as measured by Raman spectroscopy, representing a combination of
the amount, size and type of defects
Note 1 to entry: This can be method dependent where different instrument configurations can give different results.
Note 2 to entry: The peak intensities can be measured using area or height depending on which is most relevant.
[SOURCE: ISO 80004-13, 3.4.1.10]
4 Sheet‐form graphene‐related 2D materials
4.1 General
4.1.1 Production method
The GR2M producer should report the production method in general terms without disclosing confidential
information. This is a "self-reported and labelled” item for which there is no independent testing. Examples
include chemical vapor deposition (CVD), spin coating, spin on layer, etc.
4.1.2 Source material
The GR2M producer should report the source material used in production, without disclosing confidential
information. Examples include, from methane, acetylene, etc. Therefore, the test method is "self-reported
and labelled”.
4.1.3 Material form and substrate
The form of GR2M should be assessed by visual observation. The form of material defined in this section is
categorized as sheets. The producer may specify whether the material provided is on a substrate.
The transfer process used, if any, from the production substrate to the substrate delivered to the customer
should be categorized. Examples include chemical etching, oxidative decoupling, electrochemical
delamination, direct growth, etc.
This is a self-reported value from the producer.
This section should also describe the substrate material (copper, silicon, nickel, PET, etc.) Example:
monolayer graphene film on a silicon wafer.

ISO/TS 9651:2025(en)
4.2 Characteristics and measurement methods
4.2.1 Sheet size
4.2.1.1  Definition
The dimensions of the sheet are measured from edge to edge along the x and y axes to determine the length
and width. Materials are typically reported as a quadrangle but can be circular or irregular in shape. The
[10]
applicable standard is ISO/TS 21356-2.
4.2.1.2 Measurement methods
Measurement methods include optical microscopy, scanning electron microscopy (SEM), atomic force
microscopy (AFM) and Raman spectroscopy; however optical microscopy is the recommended method,
when measuring GR2M.
4.2.1.3 Measurement results
The measurement results shall be expressed as the average or distribution of sheet sizes, as required. The
units of the results shall be cm, mm, μm, or nm. If the flake is approximately circular then this is typically
measured using an equivalent circular diameter or if not via x, y measurements along and perpendicular to
the longest side. The thickness of the oxide layer on the substrate is crucial for optical contrast.
4.2.2 Covered area
4.2.2.1  Definition
The substrate's coverage in lateral dimensions is expressed as the percent of the area covered by a single
layer, the percent of the area covered by a multi-layer (including the number of layers), and the percent of the
area comprised of defects.
4.2.2.2 Measurement methods
The determination of the sample containing graphene or graphitic material, that is bilayer graphene, flake
like graphene, graphene nanoparticles or graphite, is done using Raman spectroscopy. Other measurement
methods include optical microscopy, SEM, and AFM. For powder samples, disperse them in a solvent
concentration of approximately 0,1 mg/ml. If the sample is already in dispersion, dilute it to approximately
0,1 mg/ml using the same solvent or mixture. To decide which methods to use, refer to the applicable
[9] [10]
standards ISO/TS 21356-1 and ISO/TS 21356-2 .
4.2.2.3 Measurement results
The measurements results shall be expressed as the required average or distribution of sheet sizes, and the
size of the sample used for testing must also be reported. The measurement results shall be expressed as a
−1
percentage. To confirm the presence of graphene or graphite, a sharp [< 30 cm full width at half maximum
−1 −1
(FWHM)] G-peak at ~1 580 cm and a 2D-peak at ~2 700 cm should be consistently observed in the
Raman spectra.
NOTE Expected values for commercial-grade material are usually more than 95 % monolayer coverage (i.e., 5 %
or less defective or multilayer material). Similar values are usually expected for materials intentionally produced as
bilayer or trilayer films.
4.2.3 Surface residue
4.2.3.1  Definition
Surface residue is defined as any particles or substances that are observed on the surface of the graphene
that are not intentionally placed or desired and are possibly the result of a transfer or other processing step.

ISO/TS 9651:2025(en)
It can also be considered as a contaminant. The amount of surface residue present on the material should be
expressed as a percent of the total area that is covered by residue.
4.2.3.2 Measurement methods
Measurement methods are optical microscopy and Raman spectroscopy. For powder samples, disperse them
in a solvent concentration of approximately 0,1 mg/ml. If the sample is already in dispersion, dilute it to
approximately 0,1 mg/ml using the same solvent or mixture. A thin layer of powder is required for this rapid
Raman spectroscopy analysis step. If a powder has been provided, this should be analyzed with a significant
amount of the sample secured on adhesive tape such that only the flakes rather than the substrate are
[9] [10]
analyzed. The applicable standards are ISO/TS 21356-1 and ISO/TS 21356-2 .
4.2.3.3 Measurement results
The values expected are <5 % of the area covered with residue. The percentage of the area covered by
residue should be reported.
4.2.4 Flake grain size
4.2.4.1  Definition
The flake grain size refers to the size of domains with the same crystallographic orientation. This
measurement is typically determined through microscopic analysis.
4.2.4.2 Measurement methods
Measurement methods are AFM, scanning tunnelling microscopy (STM), optical microscopy, SEM, and
[9]
transmission electron microscopy (TEM). The applicable standard is ISO/TS 21356-1 .
4.2.4.3 Measurement results
Values should be reported with values at the nm or μm scale.
NOTE Expected values range widely (from 100 nm to 100 µm) and are highly dependent on the intended
application. Values of >50 micron are expected.
4.2.5 A /A peak ratio
D G
4.2.5.1  Definition
The ratio of the integrated area of the D peak to the integrated area of the G peak in Raman spectroscopy can
be a metric to assess the degree of disorder or defects in carbon-based materials. A larger A /A peak ratio
D G
can indicate a higher degree of disorder. In comparison, a lower ratio suggests a more ordered structure.
4.2.5.2 Measurement methods
The measurement method is Raman spectroscopy.
4.2.5.3 Measurement results
The values of a Raman spectroscopy measurement of the material should be reported as the ratio of the
integrated area of the D to G peaks. Substrates and laser conditions can affect these values and therefore
should be listed.
ISO/TS 9651:2025(en)
4.2.6 Full width at half maximum (FWHM) of the G and 2D peaks
4.2.6.1  Definition
The FWHM of the G and 2D peaks in Raman spectroscopy is a measure of sample quality or crystallinity. It is
calculated by fitting the observed peaks to extract the FWHM.
4.2.6.2 Measurement methods
−1
The measurement method is Raman spectroscopy. The G peak (~1 580 cm spectral position) and the
−1
2D-peak (~2 700 cm ) should be extracted for separate analysis. Determine and subtract a baseline for
each area of interest, then fit Lorentzian peak shapes to the G- and 2D-peaks. A Voight fit (which contains
both Lorentzian and Gaussian functions), can be necessary in some samples. The applicable standards are
[9]
ISO/TS 21356-1 .
4.2.6.3 Measurement results
The values of a Raman spectroscopy measurement of the material should be reported as the FWHM of the G
and 2D peaks. Values can vary depending on substrate, multilayer coverage, strain, doping, laser excitation
wavelength and post processing.
4.2.7 Mobility
4.2.7.1  Definition
The ability of charge carriers (electrons and
...