SIST EN IEC 60512-99-002:2022/A1:2025

SLOVENSKI STANDARD
01-julij-2025
Konektorji za električno in elektronsko opremo - Preskusi in meritve - 99-002. del:
Časovni načrt preskušanja vzdržljivosti - Preskus 99b: Načrt preskušanja za
nenamerni izklop pri električni obremenitvi - Dopolnilo A1 (IEC 60512-99-
002:2022/AMD1:2025)
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-
002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical
load (IEC 60512-99-002:2022/AMD1:2025)
Steckverbinder für elektrische und elektronische Einrichtungen - Mess- und
Prüfverfahren - Teil 99-002: Prüfpläne für die Lebensdauer - Prüfung 99b: Prüfplan zum
unbeabsichtigten Trennen unter elektrischer Last (IEC 60512-99-002:2022/AMD1:2025)
Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie
99-002: Programmes d’essais d’endurance - Essai 99b: Programme d’essai pour le
désaccouplement sous charge électrique (IEC 60512-99-002:2022/AMD1:2025)
Ta slovenski standard je istoveten z: EN IEC 60512-99-002:2022/A1:2025
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60512-99-
002:2022/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2025
ICS 31.220.10
English Version
Connectors for electrical and electronic equipment - Tests and
measurements - Part 99-002: Endurance test schedules - Test
99b: Test schedule for unmating under electrical load
(IEC 60512-99-002:2022/AMD1:2025)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Essais et mesures - Partie 99-002: Programmes d'essais Einrichtungen - Mess- und Prüfverfahren - Teil 99-002:
d'endurance - Essai 99b: Programme d'essai pour le Prüfpläne für die Lebensdauer - Prüfung 99b: Prüfplan zum
désaccouplement sous charge électrique unbeabsichtigten Trennen unter elektrischer Last
(IEC 60512-99-002:2022/AMD1:2025) (IEC 60512-99-002:2022/AMD1:2025)
This amendment A1 modifies the European Standard EN IEC 60512-99-002:2022; it was approved by CENELEC on 2025-05-14.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60512-99-002:2022/A1:2025 E

European foreword
The text of document 48B/3106/CDV, future edition 2 of IEC 60512-99-002/AMD1, prepared by
SC 48B "Electrical connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for
electrical and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 60512-99-002:2022/A1:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-05-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-05-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60512-99-002:2022/AMD1:2025 was approved by
CENELEC as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Delete the following:
Publication Year Title EN/HD Year
IEE Std 802.3 2018 IEE Standard for Ethernet - -
IEE Std 802.3bt 2018 IEE Standard for Ethernet. Amendment - -
2: Physical Layer and Management
Parameters for Power over Ethernet
over 4 pairs
IEC 60512-99-002 ®
Edition 2.0 2025-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Connectors for electrical and electronic equipment – Tests and measurements –

Part 99-002: Endurance test schedules – Test 99b: Test schedule for unmating

under el
...