SIST EN 50632-2-1:2015
(Main)Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for drills and impact drills
Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for drills and impact drills
This clause of Part 1 is applicable except as follows:
Addition:
This part of EN 50632 applies to diamond core drills.
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-1: Besondere Anforderungen für Diamantkernbohrmaschinen
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-1: Exigences particulières pour les perceuses et les perceuses à percussion
Elektromotorna orodja - Postopek meritve prahu - 2-1. del: Posebne zahteve za svedre in udarne svedre
Ta evropski standard določa splošne zahteve za meritve prahu elektromotornih orodij, ki se napajajo iz omrežja ali baterij. Ta evropski standard velja za tista orodja, pri katerih se pričakuje nabiranje prahu (na primer mineralnega prahu, ki vsebuje kremenico, ali lesnega prahu), ne glede na to, ali so opremljeni z enoto za izločevanje prahu ali ne.
General Information
- Status
- Published
- Public Enquiry End Date
- 31-Oct-2014
- Publication Date
- 09-Nov-2015
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2015
- Due Date
- 06-Nov-2015
- Completion Date
- 10-Nov-2015
Overview
SIST EN 50632-2-1:2015 is a European Standard developed by CENELEC (CLC) that specifies the dust measurement procedures for electric motor-operated tools, focusing particularly on diamond core drills. This document supplements EN 50632-1 by addressing the unique requirements of dust emission testing for drills intended to be fitted with diamond core bits. The standard establishes clear guidelines for the measurement of both inhalable and respirable dust levels generated during the use of diamond core drills, supporting occupational health and safety objectives.
Key Topics
- Scope: Applies specifically to electric diamond core drills, including drills designed for use with or without water supply, and with or without percussion function.
- Dust measurement procedures: Outlines detailed steps for conducting dust emission tests, including testing conditions, instrumentation, and data reporting.
- Test setup and operating conditions: Specifies the materials (such as calcium silicate blocks), tool settings, hole dimensions, and distribution during testing to ensure reliable and consistent measurement results.
- Reporting requirements: Details the data and observations that must be included in reports, such as mean respirable dust concentration and any deviations in the test cycle duration.
- Reference to Part 1: Requires EN 50632-1:2015 to be used in conjunction for general requirements, with Part 2-1 modifying or supplementing clauses where relevant to diamond core drills.
Applications
SIST EN 50632-2-1:2015 is essential for:
- Manufacturers of diamond core drills: Enables compliance with European dust emission regulations to ensure declared tool performance meets safety standards.
- Testing laboratories: Provides standardized procedures and reporting formats for consistent, comparable dust emission measurements across different products and brands.
- Occupational health and safety professionals: Assists in evaluating tool safety, selecting appropriate equipment for reducing worker exposure to hazardous dust on construction sites and during industrial activities.
- Market surveillance and regulatory bodies: Offers a benchmark for enforcing dust emission limits and monitoring product compliance in the EU and EEA.
Following this standard ensures that diamond core drills are tested under realistic, reproducible conditions, thereby supporting workplace safety, product development, and regulatory compliance.
Related Standards
Organizations implementing or referencing SIST EN 50632-2-1:2015 should also be aware of:
- EN 50632-1:2015 - General requirements for dust measurement procedures for electric motor-operated tools.
- EN 50632-2-3:2015 - Particular requirements for dust measurement procedures for additional tool types.
- ISO/CEN standards related to dust control - For broader occupational exposure limits and dust suppression techniques.
- EN 60335 series - Safety requirements for household and similar electrical appliances, including power tools.
SIST EN 50632-2-1:2015 plays a critical role in harmonizing safety and performance testing across the electric tool industry, promoting healthy work environments, and supporting compliance with European safety directives. By adhering to its procedures, stakeholders ensure accurate dust emissions data that supports both regulatory and practical needs.
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
SIST EN 50632-2-1:2015 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for drills and impact drills". This standard covers: This clause of Part 1 is applicable except as follows: Addition: This part of EN 50632 applies to diamond core drills.
This clause of Part 1 is applicable except as follows: Addition: This part of EN 50632 applies to diamond core drills.
SIST EN 50632-2-1:2015 is classified under the following ICS (International Classification for Standards) categories: 25.100.30 - Drills, countersinks, reamers; 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 50632-2-1:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2015
Elektromotorna orodja - Postopek meritve prahu - 2-1. del: Posebne zahteve za
svedre in udarne svedre
Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular
requirements for drills and impact drills
Ta slovenski standard je istoveten z: EN 50632-2-1:2015
ICS:
25.100.30 Svedri, greznila, posnemalna Drills, countersinks, reamers
orodja
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50632-2-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2015
ICS 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-1: Particular requirements for diamond core drills
Outils électriques à moteur - Mode opératoire pour la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
mesure de la poussière - Partie 2-1: Exigences particulières Teil 2-1: Besondere Anforderungen für Diamant-
pour les perceuses et les perceuses à percussion Kernbohrmaschinen
This European Standard was approved by CENELEC on 2015-08-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50632-2-1:2015 E
Contents
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Test procedure . 4
5 Instrumentation . 5
6 Information to be reported . 5
Figures
Figure 101 – A-support . 6
Figure 102 – Test set-up . 7
Tables
Table 101 — Operating conditions for diamond core drills . 5
European foreword
This document (EN 50632-2-1:2015) has been prepared by CLC/TC 116 “Safety of motor-operated
electric tools”.
The following dates are fixed:
(dop) 2016-08-03
• latest date by which this document has to be
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2017-08-03
conflicting with this document have to
be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held respon
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...