EN 13614:2011
(Main)Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water.
The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion.
The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Haftung eines Bindemittelüberzuges aus Bitumenemulsion an Gesteinskörnung bei Wasserlagerung fest.
Das Verfahren berücksichtigt zwei verschiedene Aspekte des Haftverhaltens, d. h. das unmittelbare Haft¬ver-halten und die Wirkung von Wasser auf die Haftung des Bindemittels.
Das Verfahren kann mit einer Referenz-Gesteinskörnung angewendet werden. In diesem Falle misst es das eigentliche Haftungsverhalten einer Bitumenemulsion. Das Verfahren kann ebenso mit einer spezifischen Gesteinskörnung angewendet werden, wie sie auch auf einer Baustelle verwendet wird.
WARNUNG — Die Anwendung dieser Norm kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. In dieser Europäischen Norm werden nicht alle Sicherheitsprobleme angesprochen, die mit ihrer Anwendung verbunden sind. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und vorher zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eau
La présente Norme européenne décrit une méthode permettant de déterminer les propriétés d’adhésion d’une
émulsion de bitume vis-à-vis de granulats en immersion dans l’eau.
La méthode prend en compte deux aspects distincts de l'adhésivité, à savoir l'adhésivité immédiate et l'effet de l'eau sur l'adhésion du liant.
La méthode peut être mise en œuvre avec un granulat de référence. Dans ce cas, elle mesure l’aptitude à l’adhésivité intrinsèque de l’émulsion de bitume. La méthode peut également être mise en œuvre avec un granulat spécifique utilisé sur chantier.
AVERTISSEMENT — L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje obstojnosti bitumenskega filma pod vodo
Ta evropski standard določa metodo za določanje obstojnosti bitumenskega filma na agregatu pod vodo.
Metoda obravnava dva različna vidika obstojnosti, tj. takojšnjo obstojnost in učinek vode na obstojnost veziva.
Metoda se lahko uporablja z referenčnim agregatom. V tem primeru meri intrinzično obstojnost bitumenske emulzije. Metoda se lahko uporablja tudi s specifičnim agregatom pri uporabi na gradbišču.
Skladnost z zahtevami »obstojnosti«, določenimi v EN 13808, je treba ocenjevati z merjenjem učinka vode na obstojnost veziva na referenčnem agregatu.
OPOZORILO: Uporaba tega evropskega standarda lahko vključuje nevarne materiale, delovne postopke in opremo. Ta evropski standard nima namena obravnavati vseh varnostnih problemov, povezanih z njegovo uporabo. Odgovornost uporabnika tega evropskega standarda je, da vzpostavi primerne varnostne in zdravstvene prakse in pred uporabo določi veljavnost regulativnih omejitev.
General Information
- Status
- Withdrawn
- Publication Date
- 15-Mar-2011
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 31-Mar-2021
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 19-Mar-2011
- Effective Date
- 07-Apr-2021
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Kiwa BDA Testing
Building and construction product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13614:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test". This standard covers: This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water. The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion. The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water. The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion. The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 13614:2011 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13614:2011 has the following relationships with other standards: It is inter standard links to EN 13614:2004, EN 13614:2021, EN 13808:2013, EN 58:2012, EN ISO 3696:1995, EN 12594:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13614:2011 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13614:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRGRBitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei WasserlagerungBitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eauBitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13614:2011SIST EN 13614:2011en,fr,de01-junij-2011SIST EN 13614:2011SLOVENSKI
STANDARDSIST EN 13614:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13614
March 2011 ICS 75.140 Supersedes EN 13614:2004English Version
Bitumen and bituminous binders -Determination of adhesivity of bituminous emulsions by water immersion test
Bitumes et liants bitumineux -Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eau Bitumen und bitumenhaltige Bindemittel -Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung This European Standard was approved by CEN on 12 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13614:2011: ESIST EN 13614:2011
Page Foreword . 31Scope . 42Normative references . 43Terms and definitions . 44Principle . 55Reagents and materials . 56Apparatus . 57Sampling . 58Procedure . 69Expression of results . 710Precision . 711Test report . 7Annex A (informative)
Guidance for the marking of coated surface area . 8Bibliography . 9 SIST EN 13614:2011
EN 13808, Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions EN ISO 3696, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987) 3 Terms and definitions For the purposes of this document, the fol
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...