EN 13614:2004
(Main)Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method
Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method
This European Standard specifies a method for determining the adhesion of a cationic bitumen emulsion coated onto aggregate when immersed in water.
WARNING. The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung - Verfahren mit Gesteinskörnung
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Haftung eines Bindemittelüberzuges aus kationischer Bitumenemulsion an Gesteinskörnung bei Wasserlagerung fest.
WARNUNG - Die Anwendung dieser Europäischen Norm kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. Diese Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eau - Méthode utilisant des agrégats
La présente Norme européenne décrit une méthode permettant de déterminer les propriétés d'adhésion d'une émulsion cationique de bitume vis-à-vis de granulats en immersion dans l'eau.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje obstojnosti bitumenskega filma pod vodo – Metoda z agregatom
General Information
- Status
- Withdrawn
- Publication Date
- 24-Feb-2004
- Withdrawal Date
- 15-Mar-2011
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Mar-2011
- Completion Date
- 16-Mar-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 19-Mar-2011
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Kiwa BDA Testing
Building and construction product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13614:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method". This standard covers: This European Standard specifies a method for determining the adhesion of a cationic bitumen emulsion coated onto aggregate when immersed in water. WARNING. The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for determining the adhesion of a cationic bitumen emulsion coated onto aggregate when immersed in water. WARNING. The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 13614:2004 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13614:2004 has the following relationships with other standards: It is inter standard links to EN 13614:2011, EN 4604-003:2025, EN 13477-2:2010, EN ISO 15118-1:2015, EN 4604-007:2025, EN 4604-006:2025, EN 4604-008:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13614:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13614:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung - Verfahren mit GesteinskörnungBitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eau - Méthode utilisant des agrégatsBitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13614:2004SIST EN 13614:2004en01-september-2004SIST EN 13614:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13614February 2004ICS 75.140; 91.100.50English versionBitumen and bituminous binders - Determination of adhesivity ofbitumen emulsions by water immersion test - Aggregate methodBitumes et liants bitumineux - Détermination de l'adhésivitédes émulsions de bitume par l'essai d'immersion dans l'eau- Méthode utilisant des agrégatsBitumen und bitumenhaltige Bindemittel - Bestimmung desHaftverhaltens von Bitumenemulsionen beiWasserlagerung - Verfahren mit GesteinskörnungThis European Standard was approved by CEN on 9 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13614:2004: ESIST EN 13614:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...