EN 13496:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje mehanskih lastnosti mrežice iz steklenih vlakenWärmedämmstoffe für das Bauwesen - Bestimmung der mechanischen Eigenschaften von GlasfasergewebeProduits isolants thermiques pour le bâtiment - Détermination des caractéristiques mécaniques des treillis de fibres de verreThermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13496:2013SIST EN 13496:2013en,fr,de01-december-2013SIST EN 13496:2013SLOVENSKI
STANDARDSIST EN 13496:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13496
October 2013 ICS 91.100.60 Supersedes EN 13496:2002English Version
Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
Produits isolants thermiques pour le bâtiment - Détermination des caractéristiques mécaniques des treillis de fibres de verre servant à renforcer les systèmes composites d'isolation thermique par l'extérieur (ETICS) avec des enduits
Wärmedämmstoffe für das Bauwesen - Bestimmung der mechanischen Eigenschaften von Glasfasergewebe als Armierung für außenseitige Wärmedämm-Verbundsysteme mit Putz (WDVS) This European Standard was approved by CEN on 31 August 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13496:2013: ESIST EN 13496:2013

EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN ISO 9229:2007, Thermal insulation — Vocabulary (ISO 9229:2007) ISO 1887, Textile glass — Determination of combustible-matter content 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 9229:2007 and the following apply. 3.1 tensile strength of glass fibre mesh strength of the test specimen at failure relative to the width of the test specimen 4 Principle The tensile strength of glass fibre meshes is determined at failure using a tensile testing machine. 5 Apparatus 5.1 Tensile testing machine, appropriate for the range of force and displacement involved, capable of having a constant crosshead speed adjusted to (50 ± 5) mm/min.
It shall be capable of measuring the force with an accuracy of 1 % in accordance with EN 1607. 5.2 Clamps of the tensile testing machine, which shall be coated with a material to ensure at
...