EN 12814-2:2000
(Main)Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
This standard specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short term tensile welding factor. A tensile test may be used in conjunction with other tests (e.g. bend, tensile creep, macro...) to assess the performance of welded assemblies, made from thermoplastics materials. The test is applicable to co-axial or co-planar welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced, irrespective of the welding process used.
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 2: Zugversuch
Diese Norm legt Maße, Probenahmeverfahren und Vorbereitung der Proben sowie dieDurchführungsbedingungen für den Zugversuch fest, um den Kurzzeitzug- Schweißfaktor zu bestimmen. Ein Zugversuch darf in Verbindung mit anderen Prüfungen (z.B. Biegeversuch, Zeitstandversuch, makroskopische Prüfung usw.) angewendet werden, um das Betriebsverhalten von geschweißten Baugruppen aus thermoplastischen Werkstoffen zu beurteilen.
Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2: Essai de traction
La présente norme spécifie les dimensions, la méthode d'échantillonnage et la préparation des éprouvettes, ainsi que les conditions pour effectuer l'essai de traction afin de déterminer le facteur de soudage pour courtes durées en traction. Un essai de traction peut être utilisé en combinaison avec d'autres essais (par exemple : essai de pliage, essai de fluage, examen macrographique, etc.) pour évaluer les performances des assemblages soudés en matières thermoplastiques.
Preskus zvarjenih spojev plastomernih polizdelkov - 2. del: Trgalni preskus
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jan-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249/SC 5/WG 2 - Testing of welded joints
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 27-Jan-2021
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 03-Feb-2021
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12814-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test". This standard covers: This standard specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short term tensile welding factor. A tensile test may be used in conjunction with other tests (e.g. bend, tensile creep, macro...) to assess the performance of welded assemblies, made from thermoplastics materials. The test is applicable to co-axial or co-planar welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced, irrespective of the welding process used.
This standard specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short term tensile welding factor. A tensile test may be used in conjunction with other tests (e.g. bend, tensile creep, macro...) to assess the performance of welded assemblies, made from thermoplastics materials. The test is applicable to co-axial or co-planar welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced, irrespective of the welding process used.
EN 12814-2:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160.40 - Welded joints and welds. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12814-2:2000 has the following relationships with other standards: It is inter standard links to EN 12814-2:2021, EN 13067:2012; is excused to EN 12814-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12814-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskus zvarjenih spojev plastomernih polizdelkov - 2. del: Trgalni preskusPrüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 2: ZugversuchEssais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2: Essai de tractionTesting of welded joints of thermoplastics semi-finished products - Part 2: Tensile test25.160.40Varj
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...