Status
Not Published
Publication Date
17-Nov-2026
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
15-Nov-2026
Completion Date
15-Nov-2026

Buy Documents

Draft

EN ISO 11117:2020/oprA1:2026

English language (6 pages)
Preview
Preview
e-Library read for
×1 day

EN ISO 11117:2019/A1:2026 is Amendment 1 to EN ISO 11117:2019 for gas cylinders. It updates the design, construction and test provisions for valve protection caps and guards, with changes to North American thread dimensions, the way valve guard dimensions are described, and the conditions for further evaluation after valve design changes.

What does EN ISO 11117:2019/A1:2026 specify?

EN ISO 11117:2019/A1:2026 is a targeted amendment to EN ISO 11117:2019. Its content is organized as replacements to Figure 5, Tables 3 and 4, and selected paragraphs in Clauses 7.1, 7.2, 7.7.8, 7.7.9 and Clause 9.

In practice, the amendment is for readers who already use the base standard and need the updated technical text. It mainly affects thread compatibility data and the rules for judging whether a changed valve or valve guard needs more evaluation.

What are the key requirements of EN ISO 11117:2019/A1:2026?

EN ISO 11117:2019/A1:2026 changes several technical details in the base standard. The most important points are the updated thread dimensions, the clearer definition of valve guard size information, and the revised decision rules for when changes to the valve require repeat testing.

Thread dimensions and tolerances

  • Clause 4.3 replaces Figure 5, Table 3 and Table 4 with revised data for typical North American threads.
    This matters because designers and manufacturers need matching dimensions and tolerances if the valve protection cap or valve guard is to fit the cylinder neck ring correctly.

How valve guard dimensions are described

  • Clause 7.1 now distinguishes between maximum dimensions and a maximum dimensional envelope.
    In practice, this gives users a clearer way to define the overall size limit for a valve guard.

  • Clause 7.2 e) 2) requires the external dimensions of valve guards, including at least L and R, plus the arrangement of physical features that define the dimensional envelope, for example by a schematic drawing.
    This helps testing and approval teams describe the protected valve arrangement in a consistent way.

When further evaluation is needed

  • Clause 7.7.8 says that changes to the valve design, such as material, connections or handwheel, do not require further evaluation for valve protection caps and valve guards.
    For valve guards, adding or changing the position, arrangement or orientation of physical features, such as an additional pressure gauge or a different valve filling connection location, can require further evaluation to decide whether the drop test has to be repeated.

  • Clause 7.7.9 extends that rule for additional changes to the valve design, including material, connections, handwheel, and physical features.
    The practical point is that the test decision follows the actual protected valve configuration, not just the general product family.

Document structure

  • Clause 9 updates the list of indents so the clause structure matches the revised text.
    This is mainly editorial, but it keeps the clause layout consistent for users who work through the requirements clause by clause.

What terms does EN ISO 11117:2019/A1:2026 define?

EN ISO 11117:2019/A1:2026 uses terms tied to valve protection and test evaluation.

  • Valve protection cap - a protective cap used to cover and protect the valve on a gas cylinder.
  • Valve guard - a protective arrangement for the valve, with external features that define its dimensional envelope.
  • Dimensional envelope - the external space occupied by a valve guard, defined by its dimensions and physical features.
  • Physical features - elements such as a pressure gauge or valve filling connection whose position or orientation can affect evaluation.
  • Drop test - the test used to check whether a valve or protected valve arrangement still meets the required protection performance after changes.
  • Further evaluation - the review needed to decide whether a change is significant enough to repeat the drop test.

Who uses EN ISO 11117:2019/A1:2026?

EN ISO 11117:2019/A1:2026 is used by designers and manufacturers of gas cylinders, valve protection caps and valve guards. They use it to set compatible thread dimensions and to decide whether a product change triggers more testing.

Testing laboratories use it to apply the revised dimensional information and the updated drop-test decision rules. Quality managers, conformity assessment teams and buyers use it to compare products against the same technical basis.

What changed in EN ISO 11117:2019/A1:2026 from the previous edition?

EN ISO 11117:2019/A1:2026 is Amendment 1 to EN ISO 11117:2019. The amendment replaces the North American thread figure and tables, revises the wording on maximum dimensions and dimensional envelopes, and clarifies when valve design changes require further evaluation or a repeat drop test.

It also updates the list of indents in Clause 9.

Which standards are used with EN ISO 11117:2019/A1:2026?

EN ISO 11117:2019 is the base standard that EN ISO 11117:2019/A1:2026 amends. Users need the amendment together with the base document because the amendment only changes selected figures, tables and paragraphs.

What does the EN ISO 11117:2019/A1:2026 document contain?

EN ISO 11117:2019/A1:2026 contains replacement dimensional data for typical North American threads in Figure 5, Table 3 and Table 4. It also revises Clause 7 so users can describe valve guards by a dimensional envelope, including external dimensions and the arrangement of physical features.

The amendment adds clearer rules for deciding when changes to valve design or valve guard features need further evaluation. Those rules are used for design review, testing and decisions on whether the drop test must be repeated. Clause 9 is updated to match the revised clause structure.

Relations

Effective Date
12-Feb-2026
Effective Date
23-Oct-2024

Buy Documents

Draft

EN ISO 11117:2020/oprA1:2026

English language (6 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

BSI Group

BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

UKAS United Kingdom Verified

TÜV Rheinland

TÜV Rheinland is a leading international provider of technical services.

DAKKS Germany Verified

TÜV SÜD

TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.

DAKKS Germany Verified

Sponsored listings

Frequently Asked Questions

EN ISO 11117:2019/A1:2026 is a draft published by the European Committee for Standardization (CEN). Its full title is "Gas cylinders - Valve protection caps and guards - Design, construction and tests - Amendment 1 (ISO 11117:2019/Amd 1:2026)". This standard covers: Gas cylinders - Valve protection caps and guards - Design, construction and tests - Amendment 1 (ISO 11117:2019/Amd 1:2026)

Gas cylinders - Valve protection caps and guards - Design, construction and tests - Amendment 1 (ISO 11117:2019/Amd 1:2026)

EN ISO 11117:2019/A1:2026 is classified under the following ICS (International Classification for Standards) categories: 11.040.10 - Anaesthetic, respiratory and reanimation equipment; 23.020.35 - Gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 11117:2019/A1:2026 has the following relationships with other standards: It is inter standard links to ISO 11117:2019/Amd 1:2026, EN ISO 11117:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 11117:2019/A1:2026 is associated with the following European legislation: EU Directives/Regulations: 2008/68/EC; Standardization Mandates: M/TDG. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN ISO 11117:2019/A1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN ISO 11117:2020/oprA1:2026
01-marec-2026
Plinske jeklenke - Zaščitne kape in varovala ventilov plinskih jeklenk -
Konstruiranje, izdelava in preskusi - Dopolnilo A1 (ISO 11117:2019/DAM 1:2026)
Gas cylinders - Valve protection caps and guards - Design, construction and tests -
Amendment 1 (ISO 11117:2019/DAM 1:2026)
Gasflaschen - Ventilschutzkappen und Schutzkörbe - Auslegung, Bau und Prüfungen -
Änderung 1 (ISO 11117:2019/DAM 1:2026)
Bouteilles à gaz - Chapeaux fermés et chapeaux ouverts de protection des robinets -
Conception, construction et essais - Amendement 1 (ISO 11117:2019/DAM 1:2026)
Ta slovenski standard je istoveten z: EN ISO 11117:2019/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.99 Drugi ventili Other valves
SIST EN ISO 11117:2020/oprA1:2026 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 11117:2020/oprA1:2026

SIST EN ISO 11117:2020/oprA1:2026
DRAFT
Amendment
ISO 11117:2019/
DAM 1
ISO/TC 58/SC 2
Gas cylinders — Valve protection
Secretariat: AFNOR
caps and guards — Design,
construction and tests
Voting begins on:
2026-01-15
AMENDMENT 1
Voting terminates on:
2026-04-09
Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de
protection des robinets — Conception, construction et essais
AMENDEMENT 1
ICS: 23.020.35; 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 11117:2019/DAM 1:2026(en)
SIST EN ISO 11117:2020/oprA1:2026
DRAFT
ISO 11117:2019/DAM 1:2026(en)
Amendment
ISO 11117:2019/
DAM 1
ISO/TC 58/SC 2
Gas cylinders — Valve protection
Secretariat: AFNOR
caps and guards — Design,
construction and tests
Voting begins on:
AMENDMENT 1
Voting terminates on:
Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de
protection des robinets — Conception, construction et essais
AMENDEMENT 1
ICS: 23.020.35; 11.040.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO 11117:2019/DAM 1:2026(en)
ii
SIST EN ISO 11117:2020/oprA1:2026
ISO 11117:2019/DAM 1:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters
...