13.030 - Wastes
ICS 13.030 Details
Wastes
Abfall. Mull
Dechets
Odpadki
General Information
Frequently Asked Questions
ICS 13.030 is a classification code in the International Classification for Standards (ICS) system. It covers "Wastes". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1570 standards classified under ICS 13.030 (Wastes). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 13.030 - Wastes
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies requirements and provides guidance for the sustainable management of waste electrical and electronic equipment (e-waste) for all process steps, from collection to returning recovered products, components, materials or energy to the value chain. It includes traceability, monitoring and evaluation of the e-waste flow, recovery rate and recovery quality.
This document is intended for use by an organization involved in e-waste management seeking to manage its responsibilities in a systematic manner.
The requirements set by this document will help an organization to achieve sustainability outcomes within the context of e-waste management, including:
– enhancement of organizations' performance in relation to quality, environment and occupational health and safety;
– fulfilment of compliance obligations.
This document is applicable to any organization, regardless of its size, type and nature.
This document applies to the environmental, health and safety, and quality aspects of e-waste management activities that the organization determines it can either control or influence, from a lifecycle perspective.
NOTE 1 Social aspects – e.g. employment creation, conflict minerals, employment conditions – are not addressed directly but indirectly through the benefits of sustainable management of e-waste.
NOTE 2 Additional local requirements or regulations can apply.
This document is a basic environment horizontal publication focusing on essential requirements and is primarily intended for use by committees in the preparation of publications within the area of environment in accordance with the principles laid down in IEC Guide 123. Wherever applicable, it is the responsibility of committees to make use of environment basic publications in the preparation of their environment group and product publications. Committees can apply this document directly to products when they do not develop a product publication in the area of environment.
- Standard54 pagesEnglish languagee-Library read for1 day
This document provides requirements and recommendations for the ecotoxicological evaluation and classification of sludge for land application, and suitable land application pathways. This document applies to sludge from wastewater treatment plants.
- Standard29 pagesEnglish languagesale 15% off
This document provides guidance for communicating the risks related to the beneficial use of biosolids produced from industrial and municipal sludge and municipal biosolids derived products (e.g. composts, growing medium) and for managing public perception related to their use. This document: defines key concepts related to risk and risk communication; provides context for risk in relation to the beneficial use of biosolids; describes public perceptions and responses to the beneficial use of biosolids at a global scale; outlines risk communication principles, methods, and tools; includes case studies and examples of communication strategies. This document can also be used to support the development of biosolids management plans, particularly in relation to community consultation, engagement, and communication activities. In addition, it can be applied, where appropriate, to risk communication associated with other beneficial uses of biosolids or similar materials. This document does not apply to communication regarding hazardous sludge originating from wastewater that, due to its physical, chemical, or infectious properties, can pose significant risks to human health or the environment during use, handling, storage, or transportation, and requires specialized disposal methods. The definition of “beneficial use of biosolids” is outside the scope of this document.
- Standard25 pagesEnglish languagesale 15% off
This document specifies a method to determine the visible macroscopic impurities > 2 mm and stones > 5 mm in compost and digestate. Macroscopic impurities are contaminants that are not naturally occurring in soil such as pieces of glass, metal, plastic. This method is not able to make a distinction between compostable and non-compostable plastics.
Fragments of wood or bark are acceptable constituents of the sample and not classified as macroscopic impurities.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the general requirements on procedures for the preservation, handling and storage of samples of sewage and waterworks sludge, suspended matter, marine sediments and freshwater sediments for either chemical, physical, radiochemical, hydrobiological or microbiological examination, or all, in the laboratory.
The procedures in this document are not applicable to dried samples of sludge, sediment and suspended matter.
NOTE The storage conditions given do not necessarily apply for derived samples, e.g. sediment eluates or extracts.
This document is not applicable to samples intended for biotesting with ecotoxicological or biological assays (which is specified in ISO 5667-16[5]) nor intended for microplastics (which is specified in ISO 5667-27[7]).
- Standard43 pagesEnglish languagee-Library read for1 day
This document specifies a method to determine the visible macroscopic impurities > 2 mm and stones > 5 mm in compost and digestate. Macroscopic impurities are contaminants that are not naturally occurring in soil such as pieces of glass, metal, plastic. This method is not able to make a distinction between compostable and non-compostable plastics.
Fragments of wood or bark are acceptable constituents of the sample and not classified as macroscopic impurities.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies the standard for the digital exchange of data between the disposition (i.e. registered Office) and the mobile waste and recycling collection units (revolving emptying system according to the EN 840 series and the EN 13071 series and refuse collection vehicles according to the EN 1501 series).
The technique of data transmission is not part of this document.
- Standard50 pagesEnglish languagee-Library read for1 day
This document specifies the standard for the digital exchange of data between the disposition (i.e. registered Office) and the mobile waste and recycling collection units (revolving emptying system according to the EN 840 series and the EN 13071 series and refuse collection vehicles according to the EN 1501 series).
The technique of data transmission is not part of this document.
- Standard50 pagesEnglish languagee-Library read for1 day
This document specifies the general requirements on procedures for the preservation, handling and storage of samples of sewage and waterworks sludge, suspended matter, marine sediments and freshwater sediments for either chemical, physical, radiochemical, hydrobiological or microbiological examination, or all, in the laboratory.
The procedures in this document are not applicable to dried samples of sludge, sediment and suspended matter.
NOTE The storage conditions given do not necessarily apply for derived samples, e.g. sediment eluates or extracts.
This document is not applicable to samples intended for biotesting with ecotoxicological or biological assays (which is specified in ISO 5667-16[5]) nor intended for microplastics (which is specified in ISO 5667-27[7]).
- Standard43 pagesEnglish languagee-Library read for1 day
This document specifies the general requirements on procedures for the preservation, handling and storage of samples of sewage and waterworks sludge, suspended matter, marine sediments and freshwater sediments for either chemical, physical, radiochemical, hydrobiological or microbiological examination, or all, in the laboratory. The procedures in this document are not applicable to dried samples of sludge, sediment and suspended matter. NOTE The storage conditions given do not necessarily apply for derived samples, e.g. sediment eluates or extracts. This document is not applicable to samples intended for biotesting with ecotoxicological or biological assays (which is specified in ISO 5667-16[5]) nor intended for microplastics (which is specified in ISO 5667-27[7]).
- Standard34 pagesEnglish languagesale 15% off
- Standard35 pagesFrench languagesale 15% off
This document gives guidance on the labelling and information folder of potentially permanent magnet containing products in the context of information exchange between supply chain actors to improve recyclability of permanent magnets.
This document can be used by any natural or legal person that will place into the EU market products containing permanent magnets. The document is horizontal by nature and can potentially be applied to any type of permanent magnet containing product. Explicitly in scope are the product- and component groups mentioned in the introduction, as soon the total mass of permanent magnets is above the reporting level threshold specified 4.1 of this document.
The document specifies:
1. the graphical format, application, and location of the labels, so they are easily located, legible, and scannable in the end-of-life state of the products in a way that is suitable for products of different sizes and complexity;
2. the specifications of the data carrier, both in its physical format as placed on the product, and the accessibility, security, and verifiability of information;
3. the access rights of relevant stakeholders to information;
4. the information to be supplied regarding the location and composition of the permanent magnets;
5. the information to be supplied regarding adjacent materials like coatings and fixation features, including adhesives;
6. how to create step-by-step instructions for accessing and safely removing the permanent magnets, specifying the tools and technologies required, providing the recyclers a practically useful, unequivocal guide on how the disassembly of the magnets can be done most efficiently, and
7. the format of the data to be supplied as per the previous points 4. – 6.
Labelling is employed for products which encompass at least one component mentioned above or a singular magnet, including segmented magnets, which holds a total mass of magnetic material as described in Table 1. Other magnet-holding components within a product that fall below that threshold are exempt from declaration and labelling. The purpose of these thresholds is to establish a sensible balance between the efforts required by both the responsible entities for labelling, as well as the efforts by the dismantlers and recyclers, and the output of recycled material. By excluding potential scrap sources where the yield would not warrant the effort, the work can be simplified for both sides.
- Technical specification41 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Standard16 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and for the evaluation process of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard33 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with recycling processes.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Standard14 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard33 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Standard18 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process for bottles predominantly made of PET with respect to compatibility of the design with recycling processes.
Packaging components and ancillary elements made of other materials than PET are also covered by this document as they need to be evaluated for compatibility with the recycling processes.
- Standard24 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with state-of-the-art collecting, sorting, and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Standard11 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with the state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of materials other than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard27 pagesEnglish languagee-Library read for1 day
This document provides a framework and principles for design for recycling documents for assessing the identification of the level of compatibility of plastic-packaging feature with the applicable collection, sorting and recycling processes, describing the level of compatibility.
This document covers any packaging predominantly made of plastic and separate components predominantly made of plastic. It aims to provide a consistent approach for the guidelines and protocols for each polymer and format.
- Standard39 pagesEnglish languagee-Library read for1 day
This document provides testing procedures and requirements on the evaluation processes for the sortability of plastic packaging with regard to compatibility of the design with state-of-the-art collecting and sorting processes for the plastic used.
This document covers any packaging predominantly made of plastic and separate packaging components predominantly made of plastic, both in case they undergo sorting processes.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard23 pagesEnglish languagee-Library read for1 day
This document covers the design of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard36 pagesEnglish languagee-Library read for1 day
This document covers the design of any bottle with the main body of the packaging unit predominantly made of PET and the design of separate components predominantly made of PET, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard20 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard28 pagesEnglish languagee-Library read for1 day
This document gives guidance on the labelling and information folder of potentially permanent magnet containing products in the context of information exchange between supply chain actors to improve recyclability of permanent magnets.
This document can be used by any natural or legal person that will place into the EU market products containing permanent magnets. The document is horizontal by nature and can potentially be applied to any type of permanent magnet containing product. Explicitly in scope are the product- and component groups mentioned in the introduction, as soon the total mass of permanent magnets is above the reporting level threshold specified 4.1 of this document.
The document specifies:
1. the graphical format, application, and location of the labels, so they are easily located, legible, and scannable in the end-of-life state of the products in a way that is suitable for products of different sizes and complexity;
2. the specifications of the data carrier, both in its physical format as placed on the product, and the accessibility, security, and verifiability of information;
3. the access rights of relevant stakeholders to information;
4. the information to be supplied regarding the location and composition of the permanent magnets;
5. the information to be supplied regarding adjacent materials like coatings and fixation features, including adhesives;
6. how to create step-by-step instructions for accessing and safely removing the permanent magnets, specifying the tools and technologies required, providing the recyclers a practically useful, unequivocal guide on how the disassembly of the magnets can be done most efficiently, and
7. the format of the data to be supplied as per the previous points 4. – 6.
Labelling is employed for products which encompass at least one component mentioned above or a singular magnet, including segmented magnets, which holds a total mass of magnetic material as described in Table 1. Other magnet-holding components within a product that fall below that threshold are exempt from declaration and labelling. The purpose of these thresholds is to establish a sensible balance between the efforts required by both the responsible entities for labelling, as well as the efforts by the dismantlers and recyclers, and the output of recycled material. By excluding potential scrap sources where the yield would not warrant the effort, the work can be simplified for both sides.
- Technical specification41 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Standard16 pagesEnglish languagee-Library read for1 day
This document covers the design of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard36 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with state-of-the-art collecting, sorting, and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Standard11 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process for bottles predominantly made of PET with respect to compatibility of the design with recycling processes.
Packaging components and ancillary elements made of other materials than PET are also covered by this document as they need to be evaluated for compatibility with the recycling processes.
- Standard24 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with the state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of materials other than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard27 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard33 pagesEnglish languagee-Library read for1 day
This document provides a framework and principles for design for recycling documents for assessing the identification of the level of compatibility of plastic-packaging feature with the applicable collection, sorting and recycling processes, describing the level of compatibility.
This document covers any packaging predominantly made of plastic and separate components predominantly made of plastic. It aims to provide a consistent approach for the guidelines and protocols for each polymer and format.
- Standard39 pagesEnglish languagee-Library read for1 day
This document covers the design of any bottle with the main body of the packaging unit predominantly made of PET and the design of separate components predominantly made of PET, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard20 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging with the main body of the packaging unit predominantly made of PS or XPS and the design of separate components predominantly made of rigid PS or XPS, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PS and XPS are also covered by this document as they need to be evaluated on compatibility with PS or XPS polymer recycling.
- Standard18 pagesEnglish languagee-Library read for1 day
This document covers the design of any rigid packaging with the main body of the packaging unit predominantly made of PE or PP and the design of separate components predominantly made of rigid PE or rigid PP, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes and useability of the recyclates in an application.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard28 pagesEnglish languagee-Library read for1 day
This document provides testing procedures and requirements on the evaluation processes for the sortability of plastic packaging with regard to compatibility of the design with state-of-the-art collecting and sorting processes for the plastic used.
This document covers any packaging predominantly made of plastic and separate packaging components predominantly made of plastic, both in case they undergo sorting processes.
- Standard34 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any flexible packaging with the main body of the packaging unit predominantly made of PE or PP and for the evaluation process of separate components predominantly made of flexible PE or flexible PP, with respect to compatibility of the design with state-of-the-art collecting, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PE and PP are also covered by this document as they need to be evaluated on compatibility with PE or PP polymer recycling.
- Standard33 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid PET packaging that does not fall within the definition of a PET bottle as outlined in Part 4 of this document, with respect to compatibility of the design with state-of-the-art collection, sorting and recycling processes, and the characterization of the output(s) compared to a reference material.
Packaging constituents and packaging components made of other materials than PET are also covered by this document as they need to be evaluated on compatibility with PET polymer recycling.
- Standard23 pagesEnglish languagee-Library read for1 day
This document provides requirements for the evaluation process of any rigid packaging which has its main component, in weight, predominantly made of EPS, with respect to compatibility of the design with recycling processes.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.
Unless otherwise stated, in the interests of better readability, ‘EPS packaging’ always includes ‘EPS white goods packaging and fish boxes’.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, soil-like material and sludge by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with matrix-matched standards.
This document is applicable for the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Te, I, Cs, Ba, Ta, W, Hg, Tl, Pb, Bi, Th and U. Concentration levels between a mass fraction of approximately 0,000 1 % and 100 % can be determined depending on the element and the instrument used.
An optional XRF screening method for solid and liquid material as waste, sludge and soil is added in Annex A which provides a total element characterization at a semi-quantitative level, where the calibration is based on matrix-independent calibration curves, previously set up by the manufacturer.
- Standard46 pagesEnglish languagee-Library read for1 day
This document provides information on the processes and technologies for inorganic substance and nutrient recovery from sludge.
This document is applicable to sludge and products from urban wastewater collection systems, night soil, wastewater treatment plants for urban and similar industrial waters. It includes all sludge that can have either similar environmental or health impacts, or both.
Hazardous sludge from industry and dredged sludge are excluded from this document.
- Technical report47 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment:
aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhenium (Re), rhodium (Rh), rubidium (Rb), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr).
NOTE 1 Details on validation are given in Annex A.
This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[7]).
NOTE 2 Construction products include e.g. mineral-based products, bituminous products, metals, wood-based products, plastics and rubbers, sealants and adhesives, paints and coatings.
- Standard26 pagesEnglish languagee-Library read for1 day
This document specifies methods for the calculation of the dry matter fraction of sludge, sludge products, treated biowaste, soil and waste for which the results of performed analysis are calculated to the dry matter basis. Depending on the nature and origin of the sample, the calculation is based on a determination of the dry residue (method A) or a determination of the water content (methods A and B). It applies to samples containing more than 1 % (mass fraction) of dry residue or more than 1 % (mass fraction) of water.
Method A applies to sludge, sludge products, treated biowaste, soil and solid waste. Method B applies to liquid waste and to samples which are suspected or known to contain volatiles except for water.
- Standard20 pagesEnglish languagee-Library read for1 day
This document establishes requirements and recommendations for the operation of the anaerobic digestion of sludge in order to support safe and sufficient operation of anaerobic digestion facilities to produce to produce sufficient biogas and control by-products qualities.
In particular, conditions to optimize mixing within the reactor and appropriate control systems management for safe and reliable operation are described in this document. Performance of the processes in terms of biogas and digestate production are presented depending on type of technologies available on the market. Blending sludge with waste (co-substrate) and mixing the sludge with organic wastes to increase digester loading are also considered.
This document is applicable to decision-makers and operators in charge of an anaerobic digestion system.
- Standard47 pagesEnglish languagee-Library read for1 day
This document describes procedures for the determination of non-rare earth impurities in individual rare earth metals and their oxides through the use of inductively coupled plasma atomic emission spectroscopy (ICP-AES). Magnesium (Mg), aluminum (Al), silicon (Si), calcium (Ca) and iron (Fe) are included as non-rare earth impurity elements, and the measurement ranges for each impurity element are specified. The applicable measurement range (mass fraction %) of magnesium, aluminum, silicon and calcium is from 0,001 to 0,2, and that of iron is from 0,001 to 0,5. The verified measurement ranges in the interlaboratory tests are described later in this document.
- Standard19 pagesEnglish languagee-Library read for1 day
This document describes procedures for the determination of non-rare earth impurities in individual rare earth metals and their oxides through the use of inductively coupled plasma atomic emission spectroscopy (ICP-AES). Magnesium (Mg), aluminum (Al), silicon (Si), calcium (Ca) and iron (Fe) are included as non-rare earth impurity elements, and the measurement ranges for each impurity element are specified. The applicable measurement range (mass fraction %) of magnesium, aluminum, silicon and calcium is from 0,001 to 0,2, and that of iron is from 0,001 to 0,5. The verified measurement ranges in the interlaboratory tests are described later in this document.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies a test procedure to identify performance characteristics and trash volume capacity rating of trash compactors used on a commercial aircraft. Furthermore it specifies the calculation procedure to determine an energy consumption index and a performance index.
- Standard10 pagesEnglish languagee-Library read for1 day
This method gives a standardized procedure for the conditioning operation when selecting a conditioning product at laboratory scale and also for the production of flocculated thickened sludge for subsequent dewatering tests. This document provides a method for laboratory chemical conditioning of sludge. The method applies to sludges and suspensions from: — storm water handling; — urban wastewater collecting systems; — urban wastewater treatment plants; — industrial wastewater that has been treated similarly to urban wastewater; — water supply plants. This document is applicable to all sludge that can have similar environmental or health impacts, or both, with exclusion of hazardous sludge from industry and dredged sludge.
- Standard13 pagesEnglish languagesale 15% off
This document establishes the terms, definitions, methodologies and calculations that are necessary for the recovery and recycling of waste from plastic products and materials labelled as industrially compostable through organic recycling. It identifies the different types of organic recycling technologies used in the recovery and subsequent recycling of industrially compostable plastics waste arising from pre-consumer and post-consumer sources. It also establishes the requirements and calculations to be considered in evaluating organic recycling inputs and outputs and determining output classifications for the recycling operation and the downstream integration points. This document also outlines general quality requirements to be applied in all steps of the recovery process, and provides general recommendations for inclusion in material standards, test standards and product specifications. The process stages, requirements, recommendations and terminology presented in this document are intended to be of general applicability. This document does not establish test methods and criteria for the definition of the organic recyclability (e.g. compostability) of plastic materials and products. This document refers to plastic waste deriving from products that have been classified as suitable for recovery through organic recycling by the relevant reference standards (e.g. ISO 17088, ISO 18606), and therefore labelled as industrially compostable. These products are generally called “industrially compostable” (e.g. compostable bag, compostable tableware) meaning “suitable for organic recycling”, independently of the treatment technology used for recycling (whether it is composting, or a combination of anaerobic digestion and composting, or only anaerobic digestion). This document does not address home composting because this gardening practice cannot be classified as recycling.
- Standard13 pagesEnglish languagesale 15% off