01.110 - Technical product documentation
ICS 01.110 Details
Technical product documentation
Technische Produktdokumentation
Documentation technique des produits
Tehnična dokumentacija za izdelke
General Information
Frequently Asked Questions
ICS 01.110 is a classification code in the International Classification for Standards (ICS) system. It covers "Technical product documentation". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 440 standards classified under ICS 01.110 (Technical product documentation). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 01.110 - Technical product documentation
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document provides an overview description for the recommended processes for archiving of model-based product data, (e.g. 3D CAD and PDM data). The detailed processes are described in additional process parts of the EN 9300 series.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies the fundamentals and concepts for the long-term preservation of digital product and technical data. The EN 9300 series specifies various regulatory and business requirements, applicable domain specific methodologies and are extensible for future long-term archiving formats and data management practices.
- Standard27 pagesEnglish languagee-Library read for1 day
This part of the EN IEC 61360 specifies the new data dictionary (domain) “IEC 61360-7 - General items” including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements e.g. classes, properties) intended for cross-domain use.
- Standard14 pagesEnglish languagee-Library read for1 day
IEC 81346-14:2026, published jointly by IEC and ISO, provides, in combination with IEC 81346‑1 and IEC 81346‑2, rules and recommendations on the structuring of systems and the information on systems of manufacturing systems. It also provides additional classification schemes to those of IEC 81346‑2 for use in reference designations within manufacturing systems. It is published as a double logo standard.
The structuring principles and the classes of objects are intended to provide a clear identification and localization of the objects, and for use in their labelling in the manufacturing plant, for their designation in technical documents and for the designation of the technical documents as well.
The requirements in this document apply for processing, transportation and storage of products, as well as for systems to support the manufacturing process such as electrical systems, management systems and waste disposal systems.
This document applies to different areas within the manufacturing industry such as light industry, electrical and optical industry, chemical industry, material industry and heavy industry.
This document is not applicable for designations related to product individuals (e.g. inventory number, serial number) nor to the products manufactured.
This document is also a horizontal publication intended for use by technical committees in preparation of publications related to reference designations in accordance with the principles laid down in IEC Guide 108.
- Standard32 pagesEnglish languagee-Library read for1 day
This document provides an overview description for the recommended processes for archiving of model-based product data, (e.g. 3D CAD and PDM data). The detailed processes are described in additional process parts of the EN 9300 series.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies the fundamentals and concepts for the long-term preservation of digital product and technical data. The EN 9300 series specifies various regulatory and business requirements, applicable domain specific methodologies and are extensible for future long-term archiving formats and data management practices.
- Standard27 pagesEnglish languagee-Library read for1 day
This document defines, if needed, how to represent the situation features of an integral surface, or of a collection of integral surfaces, and how to identify them uniquely by an alphanumerical label in a technical product documentation (TPD). It also defines how to indicate the type of each situation feature or the type of each minimum set of situation features, and how to represent the positive direction of a situation feature. Annex A defines the cases where the representation of situation features is not required. Annex B defines how to represent the intrinsic mobilities inside a minimum set of situation features. Annex C defines the proportions and dimensions of the graphical symbols to be used.
- Standard38 pagesEnglish languagesale 15% off
- Standard40 pagesFrench languagesale 15% off
IEC 81346-14:2026, published jointly by IEC and ISO, provides, in combination with IEC 81346‑1 and IEC 81346‑2, rules and recommendations on the structuring of systems and the information on systems of manufacturing systems. It also provides additional classification schemes to those of IEC 81346‑2 for use in reference designations within manufacturing systems. It is published as a double logo standard. The structuring principles and the classes of objects are intended to provide a clear identification and localization of the objects, and for use in their labelling in the manufacturing plant, for their designation in technical documents and for the designation of the technical documents as well. The requirements in this document apply for processing, transportation and storage of products, as well as for systems to support the manufacturing process such as electrical systems, management systems and waste disposal systems. This document applies to different areas within the manufacturing industry such as light industry, electrical and optical industry, chemical industry, material industry and heavy industry. This document is not applicable for designations related to product individuals (e.g. inventory number, serial number) nor to the products manufactured. This document is also a horizontal publication intended for use by technical committees in preparation of publications related to reference designations in accordance with the principles laid down in IEC Guide 108.
- Standard32 pagesEnglish languagee-Library read for1 day
This document, within the context of methods and tools that support adoption, construction, operation, and management of product line maturity framework, specifies: processes for managing, operationalizing, and supporting product line maturity framework adoption (those processes are described in terms of purpose, inputs, tasks, and outcomes); method capabilities to support the defined tasks of each process; tool capabilities that automate or semi-automate tasks and methods. This document does not concern the processes and capabilities of methods and tools for a single system but rather deals with those for a family of products.
- Standard34 pagesEnglish languagesale 15% off
This part of the EN IEC 61360 specifies the new data dictionary (domain) “IEC 61360-7 - General items” including its generic concepts. The IEC 61360-7 data dictionary provides concepts (dictionary elements e.g. classes, properties) intended for cross-domain use.
- Standard14 pagesEnglish languagee-Library read for1 day
This document, within the context of methods’ and tools’ capability for supporting product line texture, defines: processes for product line texture management, operationalization, and support; those processes are described in terms of purpose, inputs, tasks, and outcomes; method capabilities to support the defined tasks of each process; tool capabilities that automate or semi-automate tasks and methods. This document does not concern the processes and capabilities of tools and methods for a single system but rather deals with those for a family of products.
- Standard32 pagesEnglish languagesale 15% off
This document, published jointly by IEC and ISO, provides, in combination with IEC 81346‑1 and IEC 81346‑2, rules and recommendations on the structuring of systems and the information on systems of manufacturing systems. It also provides additional classification schemes to those of IEC 81346‑2 for use in reference designations within manufacturing systems. It is published as a double logo standard. The structuring principles and the classes of objects are intended to provide a clear identification and localization of the objects, and for use in their labelling in the manufacturing plant, for their designation in technical documents and for the designation of the technical documents as well. The requirements in this document apply for processing, transportation and storage of products, as well as for systems to support the manufacturing process such as electrical systems, management systems and waste disposal systems. This document applies to different areas within the manufacturing industry such as light industry, electrical and optical industry, chemical industry, material industry and heavy industry. This document is not applicable for designations related to product individuals (e.g. inventory number, serial number) nor to the products manufactured. This document is also a horizontal publication intended for use by technical committees in preparation of publications related to reference designations in accordance with the principles laid down in IEC Guide 108.
- Standard28 pagesEnglish languagesale 15% off
- Standard31 pagesFrench languagesale 15% off
IEC 81346-14:2026, published jointly by IEC and ISO, provides, in combination with IEC 81346‑1 and IEC 81346‑2, rules and recommendations on the structuring of systems and the information on systems of manufacturing systems. It also provides additional classification schemes to those of IEC 81346‑2 for use in reference designations within manufacturing systems. It is published as a double logo standard.
The structuring principles and the classes of objects are intended to provide a clear identification and localization of the objects, and for use in their labelling in the manufacturing plant, for their designation in technical documents and for the designation of the technical documents as well.
The requirements in this document apply for processing, transportation and storage of products, as well as for systems to support the manufacturing process such as electrical systems, management systems and waste disposal systems.
This document applies to different areas within the manufacturing industry such as light industry, electrical and optical industry, chemical industry, material industry and heavy industry.
This document is not applicable for designations related to product individuals (e.g. inventory number, serial number) nor to the products manufactured.
This document is also a horizontal publication intended for use by technical committees in preparation of publications related to reference designations in accordance with the principles laid down in IEC Guide 108.
- Standard59 pagesEnglish and French languagesale 15% off
- Standard59 pagesEnglish and French languagesale 15% off
NOTE 1 There is guidance or rationale for this Clause in A.2.1.
This document specifies the requirements for information supplied by the manufacturer for a medical device or an accessory, as defined in 3.1. This document includes the generally applicable requirements for identification and labels on a medical device or accessory, the packaging, marking of a medical device or accessory, and accompanying information. This document does not specify the means by which the information is to be supplied.
NOTE 2 Some authorities having jurisdiction impose different requirements for the identification, marking and documentation of a medical device or accessory.
Specific requirements of medical device product standards or group standards take precedence over requirements of this document.
- Standard60 pagesEnglish languagee-Library read for1 day
This document specifies common fundamental concepts for long term archiving and retrieval of mechanical CAD information for elementary parts and assemblies. It details the “fundamentals and concepts” of EN 9300-003:2012 in the specific context of long-term archiving of CAD mechanical models.
Mechanical CAD information is divided into assembly structure and geometrical information, both including explicit and implicit geometrical representation, geometric dimensioning and tolerancing with form features.
The EN 9300-1XX series is organized as a sequence of parts, each building on the previous ones in a consistent way, each adding a level of complexity in the CAD data model. This includes the detailing of relationships between the essential information for the different types of CAD information covered by the EN 9300-1XX series.
As technology matures, additional parts will be released in order to support new requirements within the aerospace community.
1.2 In Scope
This document specifies:
- the fundamentals and concepts for long-term archiving and retrieval of 3D mechanical CAD information;
- the document structure of the EN 9300-1XX series, and the links between all these parts;
- the qualification methods for long-term preservation of archived mechanical CAD information; more specially, principles for the CAD validation properties and for verification of the quality of the CAD archived file;
- specifications for the preservation planning of archived CAD information;
- specific functions for administration and monitoring of CAD archived mechanical models;
- the definition of archive information packages for CAD data.
1.3 Out of scope
The following are out of scope for this part:
- long-term archiving of CAD 2D drawings;
- other CAD specialization disciplines, such as electrical harnesses, composite.
- Standard53 pagesEnglish languagee-Library read for1 day
1.1 In Scope
From Clause 8 to Clause 15, the scope includes:
- Management Information;
- Product Design;
- Change Management;
- Documents;
- Application of PDM-specific metadata (see EN 9300-21);
- Definition of PDM-specific metadata for Archive Information Packages (AIP).
Common Meta Data archive package requirements defined in EN 9300-21.
A visual representation of the scope of this document can be seen in Figure 1. An overview of the various parts in the EN 9300-200 series is provided in Table 1.
[Figure 1 - Scope of EN 9300-210 As Designed]
[Table 1 - EN 9300 Part 200 series]
This document does not attempt to specify how to create an OAIS/LOTAR information package. Nor does it address common issues in the archive domain, such as: snapshot vs. incremental archival methods (which are determined as part of the implementation of an archive system), or package-to-package linkages (Meta Data WG) or how to identify metadata for an archival package (Meta Data WG). Integration of PDM metadata with other domain and common metadata will be in EN 9300-021.
The scope of EN 9300-210 is same as the EN 9300-001.
1.2 Out of scope
This document does not attempt to describe how to create an OAIS/LOTAR information package. Nor does it address common issues in the archive domain, such as: snapshot vs. incremental archival methods (which are determined as part of the implementation of an archive system), or package-to-package linkages (Meta Data WG) or how to identify metadata for an archival package (Meta Data WG). For integration of PDM metadata with other domain and common metadata, see EN 9300-21.
- Standard38 pagesEnglish languagee-Library read for1 day
This document specifies common fundamental concepts for long term archiving and retrieval of mechanical CAD information for elementary parts and assemblies. It details the “fundamentals and concepts” of EN 9300-003:2012 in the specific context of long-term archiving of CAD mechanical models.
Mechanical CAD information is divided into assembly structure and geometrical information, both including explicit and implicit geometrical representation, geometric dimensioning and tolerancing with form features.
The EN 9300-1XX series is organized as a sequence of parts, each building on the previous ones in a consistent way, each adding a level of complexity in the CAD data model. This includes the detailing of relationships between the essential information for the different types of CAD information covered by the EN 9300-1XX series.
As technology matures, additional parts will be released in order to support new requirements within the aerospace community.
1.2 In Scope
This document specifies:
- the fundamentals and concepts for long-term archiving and retrieval of 3D mechanical CAD information;
- the document structure of the EN 9300-1XX series, and the links between all these parts;
- the qualification methods for long-term preservation of archived mechanical CAD information; more specially, principles for the CAD validation properties and for verification of the quality of the CAD archived file;
- specifications for the preservation planning of archived CAD information;
- specific functions for administration and monitoring of CAD archived mechanical models;
- the definition of archive information packages for CAD data.
1.3 Out of scope
The following are out of scope for this part:
- long-term archiving of CAD 2D drawings;
- other CAD specialization disciplines, such as electrical harnesses, composite.
- Standard53 pagesEnglish languagee-Library read for1 day
1.1 In Scope
From Clause 8 to Clause 15, the scope includes:
- Management Information;
- Product Design;
- Change Management;
- Documents;
- Application of PDM-specific metadata (see EN 9300-21);
- Definition of PDM-specific metadata for Archive Information Packages (AIP).
Common Meta Data archive package requirements defined in EN 9300-21.
A visual representation of the scope of this document can be seen in Figure 1. An overview of the various parts in the EN 9300-200 series is provided in Table 1.
[Figure 1 - Scope of EN 9300-210 As Designed]
[Table 1 - EN 9300 Part 200 series]
This document does not attempt to specify how to create an OAIS/LOTAR information package. Nor does it address common issues in the archive domain, such as: snapshot vs. incremental archival methods (which are determined as part of the implementation of an archive system), or package-to-package linkages (Meta Data WG) or how to identify metadata for an archival package (Meta Data WG). Integration of PDM metadata with other domain and common metadata will be in EN 9300-021.
The scope of EN 9300-210 is same as the EN 9300-001.
1.2 Out of scope
This document does not attempt to describe how to create an OAIS/LOTAR information package. Nor does it address common issues in the archive domain, such as: snapshot vs. incremental archival methods (which are determined as part of the implementation of an archive system), or package-to-package linkages (Meta Data WG) or how to identify metadata for an archival package (Meta Data WG). For integration of PDM metadata with other domain and common metadata, see EN 9300-21.
- Standard38 pagesEnglish languagee-Library read for1 day
This document specifies the preparation and reproduction of design parts. This document defines the basic principles and structure of design parts lists. This document is applicable to all design parts lists for railway applications.
- Standard26 pagesEnglish languagee-Library read for1 day
IEC 63489:2025 specifies the definition of cross-domain product data concepts (classes and properties) in the context of smart manufacturing.
This document will be published as a set of concepts within cross-domain data dictionary "General Items (IEC 61360-7)” in the IEC CDD.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies the method for declaring the technical classification relating to acoustics for a Product Standard including DoP, or European assessment document (EAD) including European Technical Approval (ETA) for a specific building product or equipment, or a family of building products or equipment. In particular, it gives advice on how to write technical specifications in response to the mandated characteristics on acoustics under the Construction Products Regulation.
NOTE 1 In the remainder of this document, the terms used relate to CEN and product standards. The concepts are, however, equally applicable to the European Organisation for Technical Approvals (EOTA).
The purpose of this document is to assist the Technical Committees in preparing acoustic clauses to ensure that such product standards:
- are as homogeneous as possible, with each individual product standard having the same basic structure;
- are in full accordance with the standards for the measurement and declaration of acoustic properties;
- reflect the latest technical knowledge of methods of determining the acoustical properties from the specific family of building products or equipment under consideration.
NOTE 2 Annex A lists the European and International Standards to be used in the drafting of acoustic provisions standards. Annex B contains guidance on choosing appropriate properties. Annex C describes the relevant measured acoustic properties for common products.
- Technical report41 pagesEnglish languagee-Library read for1 day
IEC 60068-3-14:2025 describes a generic process for developing a climatic sequential test programme by sequencing test methods selected from the IEC 60068-2 series.
This generic process comprises a systematic approach to the development of a sequential environmental test programme.
A climatic sequential test is applicable to electrical, electromechanical or electronic equipment and devices, as well as their subassemblies, constituent parts and components. It can be customized according to specific product requirements and applications.
The process is designed for use by product designers, manufacturers and users.
The process is particularly relevant to electrical products which include components or materials that have the potential to degrade, as a consequence of environmental exposures.
- Standard23 pagesEnglish languagee-Library read for1 day
IEC 63489:2025 specifies the definition of cross-domain product data concepts (classes and properties) in the context of smart manufacturing. This document will be published as a set of concepts within cross-domain data dictionary "General Items (IEC 61360-7)” in the IEC CDD.
- Standard13 pagesEnglish languagee-Library read for1 day
IEC 82474-1:2025 specifies the requirements and guidance for the content, format and exchange relating to material declarations for products.
The main intended use of this document is to provide data up and down the supply chain that:
- allows organizations to assess products against material and substance requirements,
- allows organizations to assess process chemical substances used in manufacturing and other stages of the product life,
- allows organizations to use this information in their activities related to environmentally conscious design process and across all product life cycle stages,
- allows organisations to obtain information about material efficiency and circularity of their products.
This document specifies mandatory declaration requirements and also provides optional declaration requirements.
This document does not suggest any specific software solution to capture material declaration data in the supply chain. However, it provides a data format used to transfer information within the supply chain. Organizations can determine the most appropriate method to capture material declaration data without compromising data utility and quality. This document is intended to allow declaration based on engineering judgement, responder (supplier) material declarations, and/or sampling and testing.
This document has the status of a horizontal publication in accordance with IEC Guide 123.
This edition includes the following technical changes with respect to IEC 62474:2018 (edition 2):
a) Definitions were sharpened to fulfil needs from sectors other than electrical and electronic products and systems and new terms have been added that support new topics introduced such as webservice methods, material efficiency and circularity, and new reference list types.
b) A new subclause (4.6) covering process chemical declaration was included. This subclause covers requirements related to the information required about process chemical substances, the applicable processes where they are used, and the respective product life cycle phase(s).
c) A new clause (8) covering web services on material declaration was included. This clause covers requirements related to topics such as machine-machine communication, authentication service, and data representation.
d) Requirements and guidance for the development of reference lists such as query list (QL), and application/exemption lists (AL/EL) were included.
This document has been given the status of a horizontal document in accordance with ISO/IEC Directives, Part 1. It is published as a double logo standard,
- Standard62 pagesEnglish languagee-Library read for1 day
IEC 63489:2025 specifies the definition of cross-domain product data concepts (classes and properties) in the context of smart manufacturing.
This document will be published as a set of concepts within cross-domain data dictionary "General Items (IEC 61360-7)” in the IEC CDD.
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard19 pagesEnglish and French languagesale 15% off
IEC 82474-1:2025 specifies the requirements and guidance for the content, format and exchange relating to material declarations for products. The main intended use of this document is to provide data up and down the supply chain that: - allows organizations to assess products against material and substance requirements, - allows organizations to assess process chemical substances used in manufacturing and other stages of the product life, - allows organizations to use this information in their activities related to environmentally conscious design process and across all product life cycle stages, - allows organisations to obtain information about material efficiency and circularity of their products. This document specifies mandatory declaration requirements and also provides optional declaration requirements. This document does not suggest any specific software solution to capture material declaration data in the supply chain. However, it provides a data format used to transfer information within the supply chain. Organizations can determine the most appropriate method to capture material declaration data without compromising data utility and quality. This document is intended to allow declaration based on engineering judgement, responder (supplier) material declarations, and/or sampling and testing. This document has the status of a horizontal publication in accordance with IEC Guide 123. This edition includes the following technical changes with respect to IEC 62474:2018 (edition 2): a) Definitions were sharpened to fulfil needs from sectors other than electrical and electronic products and systems and new terms have been added that support new topics introduced such as webservice methods, material efficiency and circularity, and new reference list types. b) A new subclause (4.6) covering process chemical declaration was included. This subclause covers requirements related to the information required about process chemical substances, the applicable processes where they are used, and the respective product life cycle phase(s). c) A new clause (8) covering web services on material declaration was included. This clause covers requirements related to topics such as machine-machine communication, authentication service, and data representation. d) Requirements and guidance for the development of reference lists such as query list (QL), and application/exemption lists (AL/EL) were included. This document has been given the status of a horizontal document in accordance with ISO/IEC Directives, Part 1. It is published as a double logo standard,
- Standard62 pagesEnglish languagee-Library read for1 day
This document defines the common terms, abbreviations and references used throughout the EN 9300 series of standard parts.
- Standard41 pagesEnglish languagee-Library read for1 day
IEC/ISO dual logo IEC 82474-1:2025 specifies the requirements and guidance for the content, format and exchange relating to material declarations for products. The main intended use of this document is to provide data up and down the supply chain that: - allows organizations to assess products against material and substance requirements, - allows organizations to assess process chemical substances used in manufacturing and other stages of the product life, - allows organizations to use this information in their activities related to environmentally conscious design process and across all product life cycle stages, - allows organisations to obtain information about material efficiency and circularity of their products. This document specifies mandatory declaration requirements and also provides optional declaration requirements. This document does not suggest any specific software solution to capture material declaration data in the supply chain. However, it provides a data format used to transfer information within the supply chain. Organizations can determine the most appropriate method to capture material declaration data without compromising data utility and quality. This document is intended to allow declaration based on engineering judgement, responder (supplier) material declarations, and/or sampling and testing. This document has the status of a horizontal publication in accordance with IEC Guide 123. This edition includes the following technical changes with respect to IEC 62474:2018 (edition 2): a) Definitions were sharpened to fulfil needs from sectors other than electrical and electronic products and systems and new terms have been added that support new topics introduced such as webservice methods, material efficiency and circularity, and new reference list types. b) A new subclause (4.6) covering process chemical declaration was included. This subclause covers requirements related to the information required about process chemical substances, the applicable processes where they are used, and the respective product life cycle phase(s). c) A new clause (8) covering web services on material declaration was included. This clause covers requirements related to topics such as machine-machine communication, authentication service, and data representation. d) Requirements and guidance for the development of reference lists such as query list (QL), and application/exemption lists (AL/EL) were included. This document has been given the status of a horizontal document in accordance with ISO/IEC Directives, Part 1. It is published as a double logo standard.
- Standard118 pagesEnglish languagesale 15% off
IEC 82474-1:2025 specifies the requirements and guidance for the content, format and exchange relating to material declarations for products.
The main intended use of this document is to provide data up and down the supply chain that:
- allows organizations to assess products against material and substance requirements,
- allows organizations to assess process chemical substances used in manufacturing and other stages of the product life,
- allows organizations to use this information in their activities related to environmentally conscious design process and across all product life cycle stages,
- allows organisations to obtain information about material efficiency and circularity of their products.
This document specifies mandatory declaration requirements and also provides optional declaration requirements.
This document does not suggest any specific software solution to capture material declaration data in the supply chain. However, it provides a data format used to transfer information within the supply chain. Organizations can determine the most appropriate method to capture material declaration data without compromising data utility and quality. This document is intended to allow declaration based on engineering judgement, responder (supplier) material declarations, and/or sampling and testing.
This document has the status of a horizontal publication in accordance with IEC Guide 123.
This edition includes the following technical changes with respect to IEC 62474:2018 (edition 2):
a) Definitions were sharpened to fulfil needs from sectors other than electrical and electronic products and systems and new terms have been added that support new topics introduced such as webservice methods, material efficiency and circularity, and new reference list types.
b) A new subclause (4.6) covering process chemical declaration was included. This subclause covers requirements related to the information required about process chemical substances, the applicable processes where they are used, and the respective product life cycle phase(s).
c) A new clause (8) covering web services on material declaration was included. This clause covers requirements related to topics such as machine-machine communication, authentication service, and data representation.
d) Requirements and guidance for the development of reference lists such as query list (QL), and application/exemption lists (AL/EL) were included.
This document has been given the status of a horizontal document in accordance with ISO/IEC Directives, Part 1. It is published as a double logo standard,
- Standard126 pagesEnglish and French languagesale 15% off
This document defines the common terms, abbreviations and references used throughout the EN 9300 series of standard parts.
- Standard41 pagesEnglish languagee-Library read for1 day
IEC 62321-12:2023 specifies a reference test method for the simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers, and four phthalates: di-isobutyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) in polymers of electrotechnical products.
The extraction technique described in this document is the ultrasonic-assisted extraction used for simultaneous extraction for sample preparation.
Gas chromatography-mass spectrometry (GC-MS) is considered as the reference technique for the measurement of the simultaneous determination of analytes in the range of 25 mg/kg to 2 000 mg/kg.
The test method using ultrasonic-assisted extraction followed by GC-MS detection has been evaluated by the tests of polypropylene (PP), polyvinylchloride (PVC), acrylonitrile butadiene styrene (ABS), acrylate rubber (ACM), polystyrene (PS), polyurethane (PU) and polyethylene (PE) materials.
This document has the status of a horizontal publication in accordance with IEC Guide 108.
- Standard40 pagesEnglish languagee-Library read for1 day
This document gives guidelines to support the application of the ISO 81346 and IEC 81346 series to power supply systems. It also specifies best practice for its use and implementation depending on the user and situation. The application of this document supports harmonization within and between the power supply technical domains and industries. Introductory examples of the use of reference designation systems (RDS) can be found in Annex A and Annex B. Annex C provides an example of a conversion table between an example structuring system and the classes specified in this document and other parts of the ISO 81346 and IEC 81346 series.
- Technical specification137 pagesEnglish languagesale 15% off
ISO TS 81346-101:2025, which is a Technical Specification, provides guidelines for the understanding and application of the ISO 81346 and IEC 81346 reference designation system (RDS) for power supply systems (PS). It also specifies best practice for its use and implementation depending on the user and situation. The application of this document supports harmonization within and between the power supply technical domains and industries. It was developed in response to demands by the power supply sector for guidelines to the application of the ISO 81346 and IEC 81346 series, in particular ISO 81346-10.
The very basics of the RDS are not explained in this document. It is assumed that the user of this document already is familiar with the major concepts detailed in IEC 81346-1 and IEC 81346-2. These concepts include the four RDS aspects, the basic RDS semantics and basic RDS classification rules.
Introductory examples of the use of the RDS can be found in Annex A and Annex B. Annex C provides an example of a conversion table between an example structuring system and the classes specified in this document and other parts of the ISO 81346 and IEC 81346 series.
The target industries of this document, include but are not limited to: wind, photovoltaic, thermal, nuclear and hydropower production.
- Technical specification137 pagesEnglish languagesale 15% off
This document specifies rules to identify specifications in the technical product documentation (TPD). It is applicable, if needed, to facilitate communication.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies how to uniquely identify the integral features of a part by an integral feature indicator with a unique alpha-numerical label and how indication in technical product documentation (TPD) is done, where needed to improve human readability.
The proportions and dimensions of graphical symbols for a simplified indication of repeated features are also specified.
- Standard27 pagesEnglish languagee-Library read for1 day
This document provides rules and guidelines for the classification and designation of information containers based on their inherent content. This document is applicable for information used in the life cycle of a system, e.g., industrial plants, construction entities and equipment. This document defines classes of information and their information kind classification code (ICC). The defined classes and codes provided are used as values associated with metadata, e.g., in information management systems (see IEC 82045-1 and IEC 82045-2). The rules, guidelines and classes are general and are applicable to all technical areas, for example, mechanical engineering, electrical engineering, construction engineering and process engineering. They can be used for systems based on different technologies or for systems combining several technologies. This document also has the status of a horizontal publication in accordance with IEC Guide 108. It is intended for use by technical committees in preparation of publications related to classification and designation of information. IEC 81355-1:2024 cancels and replaces the second edition of IEC 61355-1 published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61355-1:2008: a) focusing on classification of information rather that classification of document kinds; b) introduced a classification scheme based on inherent content of information; c) introduced a distinction between an information container and a document, the latter being for human perception; d) introduction of information kind classification code (ICC), replacing document kind classification code (DCC); e) introduced structuring of information containers; f) introduced an information model of the concepts dealt with; g) introduced a conversion table for merging from the use of DCC to the use of ICC.
- Draft34 pagesEnglish languagesale 15% off
This document specifies rules to identify specifications in the technical product documentation (TPD). It is applicable, if needed, to facilitate communication.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies how to uniquely identify the integral features of a part by an integral feature indicator with a unique alpha-numerical label and how indication in technical product documentation (TPD) is done, where needed to improve human readability.
The proportions and dimensions of graphical symbols for a simplified indication of repeated features are also specified.
- Standard27 pagesEnglish languagee-Library read for1 day
This document specifies how to uniquely identify the integral features of a part by an integral feature indicator with a unique alpha-numerical label and how indication in technical product documentation (TPD) is done, where needed to improve human readability. The proportions and dimensions of graphical symbols for a simplified indication of repeated features are also specified.
- Standard19 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
This document specifies rules to identify specifications in the technical product documentation (TPD). It is applicable, if needed, to facilitate communication.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
IEC 61987-32:2024 This part of IEC 61987 provides an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for I/O modules and a device list of properties (DLOP) for the description of a range of I/O module types.
The structures of the OLOP and the DLOPs correspond to the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.
Aspects other than the OLOP, needed in different electronic data exchange processes and described in IEC 61987-10 and IEC 61987-11, are published in IEC 61987-92.
The locations of the libraries of properties and of blocks used in the LOPs concerned are listed in Annex C and Annex D.
- Standard18 pagesEnglish languagee-Library read for1 day
This document defines the structure and content for the long-term preservation of digital product and technical data. EN 9300 is broken into a series of separate standard parts to make the standard applicable for different business requirements and extensible for further long-term archiving formats.
The following outlines the total scope of this document:
- for the purpose of this document, structure, and content of EN 9300 standard parts are detailed.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies a framework for building systems for the classification of requirements. Such systems can be used to indicate requirements of special importance, and communicate them for production set-up, verification, audit, etc.
This document:
— gives background information why such systems are useful in many areas of manufacturing;
— can be referred to for the concept of classification of requirements;
— functions as a framework for applying such systems in technical product documentation (TPD);
— indicates the needed elements for a classification system;
— supports with aspects in the choice of symbols for a classification system.
As a framework, this document does not give the details of a specific classification system. Instead, it functions as a basis for an organization-specific system which contains details such as notations and symbols, classification levels, assessment procedures, etc., including usage and interpretation in the TPD.
This document does not specify the contractual consequences of a classification (e.g. needed actions such as choice of tools, reliability index or process capability for a classification level) nor other references to standards or documents for handling classifications and nonconformity to requirements.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies a method for the classification of requirements based on severity and susceptibility. The classification method requires a system in line with the framework described in ISO 24096-1 to form a complete system.
This document:
— gives guidance on the needed elements for a consistent evaluation of the severity over time, and supports a company business model and its brand image;
— gives background to why additional parameters alongside severity are useful as a base for classification;
— adds susceptibility as a viable parameter along with severity;
— gives guidance on the methodology for classification requirements using severity and susceptibility.
- Standard31 pagesEnglish languagee-Library read for1 day
This document defines terms for the theory and application of technical communication. It prepares the terminological background for all other standards in the field of technical communication by providing precise definitions and standardized terms for basic concepts in this domain.
This document is applicable to persons creating information products in the field of technical communication or using these information products professionally.
- Standard31 pagesEnglish languagee-Library read for1 day
- Standard26 pagesEnglish languagesale 15% off
This document defines the structure and content for the long-term preservation of digital product and technical data. EN 9300 is broken into a series of separate standard parts to make the standard applicable for different business requirements and extensible for further long-term archiving formats.
The following outlines the total scope of this document:
- for the purpose of this document, structure, and content of EN 9300 standard parts are detailed.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies general requirements for the preparation of construction drawings intended for the field assembly of prefabricated structures for building and civil engineering works.
- Standard25 pagesEnglish languagee-Library read for1 day
IEC 60068-3-4:2023 is available as IEC 60068-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the requirements for distilled and deionized water have been revised;
b) recommendations for the cleaning procedure of test chambers have been included;
c) humidification systems (ultrasonic humidifiers and atomizers) have been added;
d) the description of water penetration mechanisms has been refined.
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 60068-3-1:2023 is available as IEC 60068-3-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-1:2023 provides guidance regarding the performance of cold and dry heat tests. This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) information relating to specimen temperatures has been revised;
b) information relating to tests of multiple specimens has been revised;
c) the effect of air density has been added;
d) a recommendation for corrective actions regarding IR radiation has been added;
e) the requirements for the mounting and supports of the specimen have been revised.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies methods for the indication of limit deviations on construction documents.
- Standard19 pagesEnglish languagee-Library read for1 day