SIST ISO 28560-2:2014

INTERNATIONAL ISO
STANDARD 28560-2
Second edition
2014-08-15
Information and documentation —
RFID in libraries —
Part 2:
Encoding of RFID data elements based
on rules from ISO/IEC 15962
Information et documentation — RFID dans les bibliothèques —
Partie 2: Encodage des éléments de données RFID fondé sur les règles
de l’ISO/CEI 15962
Reference number
©
ISO 2014
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Applicability and relationship with other systems . 3
5 Requirements . 5
5.1 Data elements . 5
5.2 RFID air interface . 5
5.3 Data protocol . 5
5.4 RFID readers . 5
6 Data elements . 5
6.1 General . 5
6.2 Primary item identifier . 7
6.3 Content parameter . 8
6.4 Owner institution (ISIL) . 8
6.5 Set information . 9
6.6 Type of usage . 9
6.7 Shelf location . 9
6.8 ONIX media format . 9
6.9 MARC media format . 9
6.10 Supplier identifier . 9
6.11 Order number . 9
6.12 ILL borrowing institution . 9
6.13 ILL transaction number .10
6.14 GS1 product identifier .10
6.15 Alternative unique item identifier .10
6.16 Local data .10
6.17 Title .10
6.18 Product identifier (local) .11
6.19 Media format (other) .11
6.20 Supply chain stage.11
6.21 Supplier invoice number .12
6.22 Alternative item identifier .12
6.23 Alternative owner institution .12
6.24 Subsidiary of an owner institution .12
6.25 Alternative ILL borrowing institution.12
6.26 Other reserved data elements.12
7 Data encoding .12
7.1 Data protocol overview .12
7.2 Data constructs .13
7.3 ISO/IEC 15961-1 commands and responses .14
7.4 ISO/IEC 15962 encoding rules .15
8 RFID tag requirements .20
8.1 Air interface protocol .20
8.2 Bit and byte sequence .21
8.3 Air interface conformance.23
8.4 Performance .23
9 Data integrity, security, and privacy issues .23
9.1 Data integrity .23
9.2 Item security .23
10 Implementation and migration .24
Annex A (informative) Information about ISO 28560 RFID in libraries .25
Annex B (normative) Relevant ISO/IEC 15961-1 application commands .26
Annex C (normative) Pre-encoding the ISIL .29
Annex D (informative) Encoding examples.34
Annex E (informative) Implementation and migration .39
Bibliography .42
iv © ISO 2014 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 46, Information and documentation, Subcommittee
SC 4, Technical interoperability.
This second edition cancels and replaces the first edition (ISO 28560-2:2011), which has been technically
revised.
ISO 28560 consists of the following parts,
...