SIST EN 14287:2004
(Main)Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
General Information
- Abstract
This European Standard specifies additional requirements on the chemical composition of aluminium and aluminium alloys intended for the manufacture of packaging and packaging components, as well as related specific technical conditions of inspection and delivery. The scope of this standard is fully defined by the final application.
NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right.
CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard.
- Status
- Published
- Publication Date
- 31-Oct-2004
- Technical Committee
- INEK - Nonferrous metals
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-2004
- Due Date
- 01-Nov-2004
- Completion Date
- 01-Nov-2004
Overview
SIST EN 14287:2004 is a European Standard developed by CEN that establishes specific chemical composition requirements for aluminium and aluminium alloys used in the manufacture of packaging and packaging components. This standard is essential for ensuring the safety, quality, and regulatory compliance of aluminium packaging materials across Europe. By defining stringent limits on heavy metals such as lead, mercury, cadmium, and hexavalent chromium, SIST EN 14287:2004 helps minimize harmful substances in packaging products, aligning with European Parliament and Council Directive 94/62/EC.
The scope of SIST EN 14287:2004 covers all aluminium-based products intended as packaging materials - including primary, secondary, and tertiary packaging components - with clear provisions for inspection and delivery conditions. Compliance with this standard supports manufacturers in maintaining product safety, quality assurance, and environmental protection.
Key Topics
Chemical Composition Requirements
SIST EN 14287:2004 mandates that aluminium and its alloys used for packaging must not intentionally introduce lead, mercury, cadmium, or hexavalent chromium.- Incidental presence of these metals combined must not exceed 100 µg/g.
- Hexavalent chromium is not normally measured in aluminium alloys because it does not naturally occur.
Product Definition and Scope
Clarifies what constitutes packaging, packaging components, and packaging constituents based on EU directives, covering sales packaging, grouped packaging, and transport packaging (excluding transport containers such as road or air containers).Inspection and Quality Assurance
The standard sets out specific inspection documents requirements, including issuing EN 10204 "3.1" inspection certificates to verify compliance.- Manufacturers must implement a quality management system equivalent to EN ISO 9001 to control product chemical composition.
- Supplier qualification, raw material traceability, and statistical process control are key quality assurance measures.
Delivery and Ordering Conditions
Orders referring to SIST EN 14287:2004 must specify the standard to ensure all deliveries conform to the chemical composition requirements.- Manufacturers may guarantee compliance over a specified period, supported by inspection certificates issued after delivery batches.
Applications
SIST EN 14287:2004 is highly relevant for:
Manufacturers of Aluminium Packaging Products
Ensures that aluminium materials used for beverage cans, food containers, foil wraps, and other packaging components comply with safety and environmental standards.Quality Control and Compliance Teams
Provides the framework to develop and maintain quality assurance programs focused on chemical composition control, supplier approvals, and certification processes.Regulatory Bodies and Test Laboratories
Supports product testing and certification aligned with European packaging directives aimed at minimizing heavy metal contamination in packaging materials.Environmental and Health Safety Advocates
Reinforces efforts to reduce hazardous substances in consumer packaging, promoting safer food contact materials and reducing environmental impact.
Related Standards
EN 10204: Metallic Products - Types of Inspection Documents
Defines the inspection certificates (e.g., 3.1 certificate) required for verifying material properties and compliance during delivery.EN ISO 9001: Quality Management Systems - Requirements
Specifies quality management principles underpinning manufacturer responsibility for process control and product conformity.CR 13695-1: Packaging - Requirements for Measuring and Verifying Heavy Metals in Packaging
Provides additional guidelines for testing and verifying the presence of regulated heavy metals in packaging materials.European Parliament and Council Directive 94/62/EC
The overarching legislative framework governing packaging and packaging waste in the European Union, including restrictions on hazardous substances.
Adhering to SIST EN 14287:2004 enables aluminium packaging producers to deliver products that meet strict European chemical safety requirements, facilitating market access and supporting sustainable packaging initiatives. This standard is a critical reference for ensuring quality and environmental compliance in the aluminium packaging industry.
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
BRCGS (Brand Reputation Compliance Global Standards)
Global food safety and quality standards owner.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
SIST EN 14287:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components". This standard covers: This European Standard specifies additional requirements on the chemical composition of aluminium and aluminium alloys intended for the manufacture of packaging and packaging components, as well as related specific technical conditions of inspection and delivery. The scope of this standard is fully defined by the final application. NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right. CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard.
This European Standard specifies additional requirements on the chemical composition of aluminium and aluminium alloys intended for the manufacture of packaging and packaging components, as well as related specific technical conditions of inspection and delivery. The scope of this standard is fully defined by the final application. NOTE Some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way imply the granting of a licence under such patent right. CEN/TC 132 affirms it is policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding standard.
SIST EN 14287:2004 is classified under the following ICS (International Classification for Standards) categories: 55.040 - Packaging materials and accessories; 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14287:2004 has the following relationships with other standards: It is inter standard links to SIST EN 10204:2004, SIST EN 485-1:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14287:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Besondere Anforderungen an die chemische Zusammensetzung von Erzeugnissen für die Herstellung von Verpackungen und VerpackungskomponentenAluminium et alliages d'aluminium - Exigences spécifiques pour la composition chimique de produits destinés a la fabrication d'emballages et de composants d'emballageAluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components77.150.10Aluminijski izdelkiAluminium products55.040SDNLUDQMHPackaging materials and accessoriesICS:Ta slovenski standard je istoveten z:EN 14287:2004SIST EN 14287:2004en01-november-2004SIST EN 14287:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14287June 2004ICS 77.150.10English versionAluminium and aluminium alloys - Specific requirements on thechemical composition of products intended to be used for themanufacture of packaging and packaging componentsAluminium et alliages d'aluminium - Exigences spécifiquespour la composition chimique de produits destinés à lafabrication d'emballages et de composants d'emballageAluminium und Aluminiumlegierungen - BesondereAnforderungen an die chemische Zusammensetzung vonErzeugnissen für die Herstellung von Verpackungen undVerpackungskomponentenThis European Standard was approved by CEN on 16 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14287:2004: ESIST EN 14287:2004
...