kSIST FprEN IEC 61753-022-02:2026

SLOVENSKI STANDARD
oSIST prEN IEC 61753-022-02:2025
01-maj-2025
Optični spojni elementi in pasivne komponente - Tehnični standard - 022-02. del:
Konektorji za mnogorodovna optična vlakna, kot repki ali povezovalne vrvice za
kategorijo C - Nadzorovana okolja
Fibre optic interconnecting devices and passive components - Performance standard -
Part 022-02: Multimode fibre optic connectors terminated as pigtails and patchcords for
category C - Controlled environment
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 022-02: Connecteurs à fibres optiques multimodales raccordés à des fibres
amorces et des cordons de brassage pour la catégorie C - Environnement contrôlé
Ta slovenski standard je istoveten z: prEN IEC 61753-022-02:2025
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-022-02:2025 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 61753-022-02:2025

oSIST prEN IEC 61753-022-02:2025
86B/5007/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 61753-022-02 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-03-21 2025-06-13
SUPERSEDES DOCUMENTS:
86B/4947/CD, 86B/4959A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Ryo Koyama
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Fibre optic interconnecting devices and passive components - Performance standard - Part
022-02: Multimode fibre optic connectors terminated as pigtails and patchcords for category C
– Controlled environment
PROPOSED STABILITY DATE: 2033
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 2 86B/5007/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 6
6 4 Tests . 8
7 5 Test report . 8
8 6 Reference components . 8
9 7 Performance requirements. 8
10 7.1 General . 8
11 7.2 Dimensions . 8
12 7.3 Sample size and test sequencing . 8
13 7.4 Endface geometry . 8
14 7.5 Visual examination . 9
15 7.6 Performance criteria . 9
16 7.7 Performance details . 12
17 Annex A (normative) Sample size . 18
18 Annex B (normative) Visual examination of outer cable sheath movement . 19
19 B.1 Scope . 19
20 B.2 Preparation of the sample and initial visual examination . 19
21 B.3 Final visual examination of outer cable sheath movement . 19
22 Bibliography . 21
24 Figure 1 – Pigtail test sample . 7
25 Figure 2 – Patchcord test samples . 7
26 Figure B.1 – Example of initial marking of the cable sheath . 19
27 Figure B.2 – Example of final visual examination . 19
29 Table 1 – Pass/Fail criteria . 10
30 Table 2 – Performance test details . 12
31 Table A.1 – Sample size . 18
oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 3 86B/5007/CDV
33 INTERNATIONAL ELECTROTECHNICAL COMMISSION
34 ____________
36 FIBRE OPTIC INTERCONNECTING DEVICES
37 AND PASSIVE COMPONENTS – PERFORMANCE STANDARD –
39 Part 022-02: Multimode fibre optic connectors terminated as pigtails and
40 patchcords for category C – Controlled environment
42 FOREWORD
43 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
44 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
45 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
46 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
47 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
48 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
49 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
50 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
51 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
52 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
53 consensus of opinion on the relevant subjects since each technical committee has representation from all
54 interested IEC National Committees.
55 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
56 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
57 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
58 misinterpretation by any end user.
59 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
60 transparently to the maximum extent possible in their national and regional publications. Any divergence between
61 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
62 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
63 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
64 services carried out by independent certification bodies.
65 6) All users should ensure that they have the latest edition of this publication.
66 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
67 members of its technical committees and IEC National Committees for any personal injury, property damage or
68 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
69 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
70 Publications.
71 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
72 indispensable for the correct application of this publication.
73 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
74 rights. IEC shall not be held responsible for identifying any or all such patent rights.
75 IEC 61753-022-02 has been prepared by subcommittee 86B: Fibre optic interconnecting
76 devices and passive components, of IEC technical committee 86: Fibre optics. It is an
77 International Standard.
78 This first edition cancels and replaces the second edition of IEC 61753-022-2 published in 2012.
79 This edition constitutes a technical revision.
80 This edition includes the following significant technical changes with respect to the previous
81 edition:
82 a) included provisions for rectangular ferrule connectors;
83 b) added terms and definitions;
84 c) updated fibre naming conventions according to IEC 60793-2-10;
85 d) test severities updated according to IEC 61753-1;
86 e) added the torsion test;
oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 4 86B/5007/CDV
87 f) reduced the duration of the fibre/cable retention test on reinforced cables from 120 s to 60 s
88 minimum;
89 g) removed the static side load test;
90 h) reduced the number of mating durability cycles for cylindrical ferrule connectors from 500
91 cycles to 200 cycles;
92 i) added mating durability for rectangular ferrule connectors with 50 cycles;
93 j) added Annex B for visual examination of the outer cable sheath movement of reinforced
94 cables as an additional requirement for change of temperature, cable retention and flexing
95 of the strain relief tests.
96 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
98 Full information on the voting for its approval can be found in the report on voting indicated in
99 the above table.
100 The language used for the development of this International Standard is English.
101 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
102 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
103 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
104 described in greater detail at www.iec.ch/publications.
105 The committee has decided that the contents of this document will remain unchanged until the
106 stability date indicated on the IEC website under webstore.iec.ch in the data related to the
107 specific document. At this date, the document will be
108 • reconfirmed,
109 • withdrawn,
110 • replaced by a revised edition, or
111 • amended.
oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 5 86B/5007/CDV
113 FIBRE OPTIC INTERCONNECTING DEVICES AND
114 PASSIVE COMPONENTS – PERFORMANCE STANDARD –
116 Part 022-02: Multimode fibre optic connectors terminated as pigtails and
117 patchcords for category C – Controlled environment
119 1 Scope
120 This part of IEC 61753 defines the minimum initial test and measurement requirements and
121 severities which multimode fibre optic connectors terminated as a pigtail or patchcord satisfy in
122 order to be categorized as meeting the IEC standard category C (controlled environment), as
123 defined in IEC 61753-1.
124 2 Normative references
125 The following documents, in whole or in part, are normatively referenced in this document and
126 are indispensable for its application. For dated references, only the edition cited applies. For
127 undated references, the latest edition of the referenced document (including any amendments)
128 applies.
129 IEC 60793-2-10, Optical fibres – Part 2-10: Product specifications – Sectional specification for
130 category A1 multimode fibres
131 IEC 60794-2-23 Optical fibre cables – Part 2-23: Indoor cables – Detailed specification for multi-
132 fibre cables for use in MPO connector terminated cable assemblies
133 IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for
134 simplex and duplex cables for use in terminated cable assemblies
135 IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and
136 measurement procedures – Part 1 General and guidance
137 IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
138 measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
139 IEC 61300-2-2, Fibre optic interconnecting devices and passive components – Basic test and
140 measurement procedures – Part 2-2: Tests – Mating durability
141 IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
142 measurement procedures – Part 2-4: Tests – Fibre or cable retention
143 IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
144 measurement procedures – Part 2-5: Tests - Torsion
145 IEC 61300-2-6, Fibre optic interconnecting devices and passive components – Basic test and
146 measurement procedures – Part 2-6: Tests – Tensile strength of coupling mechanism
147 IEC 61300-2-12, Fibre optic interconnecting devices and passive components – Basic test and
148 measurement procedures – Part 2-12: Tests – Impact
149 IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and
150 measurement procedures – Part 2-17: Tests – Cold

oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 6 86B/5007/CDV
151 IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and
152 measurement procedures – Part 2-18: Tests – Dry heat
153 IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and
154 measurement procedures – Part 2-19: Tests – Damp heat (steady state)
155 IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
156 measurement procedures – Part 2-22: Tests – Change of temperature
157 IEC 61300-2-44, Fibre optic interconnecting devices and passive components – Basic test and
158 measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices
159 IEC 61300-3-1, Fibre optic interconnecting devices and passive components – Basic test and
160 measurement procedures – Part 3-1: Examinations and measurements – Visual examination
161 IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
162 measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
163 changes in attenuation and in return loss
164 IEC 61300-3-4, Fibre optic interconnecting devices and passive components – Basic test and
165 measurement procedures – Part 3-4: Examinations and measurements – Attenuation
166 IEC 61300-3-6, Fibre optic interconnecting devices and passive components – Basic test and
167 measurement procedures – Part 3-6: Examinations and measurements – Return loss
168 IEC 61300-3-28, Fibre optic interconnecting devices and passive components – Basic test and
169 measurement procedures – Part 3-28: Examinations and measurements – Transient loss
170 IEC 61300-3-34, Fibre optic interconnecting devices and passive components – Basic test and
171 measurement procedures – Part 3-34: Examinations and measurements – Attenuation of
172 random mated connectors
173 IEC 61300-3-45, Fibre optic interconnecting devices and passive components – Basic test and
174 measurement procedures – Part 3-45: Examinations and measurements – Attenuation of
175 random mated multi-fibre connectors
176 IEC 61753-1, Fibre optic interconnecting devices and passive components – Performance
177 standard – Part 1: General and guidance
178 IEC 61754 (all parts), Fibre optic interconnecting devices and passive components – Fibre optic
179 connector interfaces
180 IEC 63267 (all parts), Fibre optic interconnecting devices and passive components – Connector
181 optical interfaces for enhanced macro bend loss multimode fibres
182 IEC 63267-2 (all parts), Fibre optic interconnecting devices and passive components –
183 Connector optical interfaces for enhanced macro bend loss multimode fibres – Part 2:
184 Connection of 50 μm core diameter multimode physically contacting fibres
185 IEC 63267-3 (all parts), Fibre optic interconnecting devices and passive components –
186 Connector optical interfaces for enhanced macro bend multimode fibres – Part 3: Connector
187 parameters of physically contacting 50 µm core diameter fibres
188 3 Terms and definitions
189 For the purposes of this document, the following terms and definitions apply.

oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 7 86B/5007/CDV
190 ISO and IEC maintain terminology databases for use in standardization at the following
191 addresses:
192 • IEC Electropedia: available at https://www.electropedia.org/
193 • ISO Online browsing platform: available at https://www.iso.org/obp
194 3.1
195 change in attenuation
196 δ
197 ± deviation from the original value of the transmitted power at the start of the test
198 Note 1 to entry: The deviation is expressed as a unit of dB.
199 3.2
200 sample
201 complete set of connector components required to provide demountable coupling between one
202 or more pairs of optical fibres
203 3.3
204 pigtail test sample
205 sample comprised of two pigtails mated with an adaptor
206 Note 1 to entry: See Figure 1
Adaptor
Pigtail
Pigtail
208 Figure 1 – Pigtail test sample
209 3.4
210 patchcord test sample
211 sample comprised of patchcord mated to two pigtails using adaptors
212 Note 1 to entry: See Figure 2
Adaptor Adaptor
Patchcord
Pigtail
Pigtail
214 Figure 2 – Patchcord test samples

oSIST prEN IEC 61753-022-02:2025
IEC CDV 61753-022-02 ED1 © IEC 2025 8 86B/5007/CDV
215 4 Tests
216 All test and measurement methods were selected from the IEC 61300 series and the test
217 parameters and requirements from IEC 61753-1 as defined in 7.6 and 7.7. Additional
218 requirements to certain tests are given in Annex B.
219 The connector plugs under test shall be terminated onto multimode fibre as per type A1 of
220 IEC 60793-2-10 fibre type A1-OM2, A1-OM3, A1-OM4 or A1-OM5 in either primary coated,
221 buffered or reinforced cable format. The full set of tests shall be carried out for at least one fibre
222 type. Other fibre types are qualified by similarity. The reinforced cable used for the pigtails or
223 patchcords shall conform to the requirements of IEC 60794-2-23 or IEC 60794-2-50. Care shall
224 be taken to respect the minimum bend radius of the cable. The connector interface standard
225 shall meet the dimensions of the relevant part of
...