SIST EN 4652-001:2015
(Main)Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification
Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification
This European Standard specifies the required characteristics, test methods, qualification and acceptance conditions of coaxial, radio frequency connectors used with flexible radio frequency cables in accordance with EN 4604 001 and semi-rigid coaxial cables.
This family of connectors is derived from MIL-PRF-39012. Front face dimensions are identical and products are fully intermateable.
Cables usable with present specification are listed in TR 6058.
Luft- und Raumfahrt - Hochfrequenz Steckverbinder, koaxial - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 001 : Spécification technique
Aeronavtika - Konektorji, koaksialni, radiofrekvenčni - 001. del: Tehnična specifikacija
Ta evropski standard določa zahtevane lastnosti, preskusne metode ter pogoje kvalifikacije in sprejemljivosti koaksialnih radiofrekvenčnih konektorjev, ki se uporabljajo z gibkimi radiofrekvenčnimi kabli v skladu s standardom EN 4604 001 in poltogimi koaksialnimi kabli.
Ta skupina konektorjev izhaja iz MIL-PRF-39012. Dimenzije sprednje strani so enake in izdelke je mogoče spojiti med sabo. Kabli, ki se uporabljajo s to specifikacijo, so navedeni v standardu TR 6058
General Information
- Status
- Published
- Publication Date
- 09-Jul-2015
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 22-Jun-2015
- Due Date
- 27-Aug-2015
- Completion Date
- 10-Jul-2015
Overview
EN 4652-001:2015 - Aerospace series: Connectors, coaxial, radio frequency - Part 001: Technical specification - is a European standard published by CEN/ASD-STAN that sets the technical requirements, test methods, qualification and acceptance criteria for coaxial RF connectors used with flexible (EN 4604-001) and semi‑rigid coaxial cables. The standard covers connector families derived from MIL‑PRF‑39012 and specifies front‑face interface dimensions so products are fully intermateable. Permissible cable codes are listed in TR 6058.
Key topics and technical requirements
- Scope and interfaces: Defines connector types and interfaces commonly used in aerospace RF systems (examples in the document include BNC, TNC, N, C, HN, SMA), with detailed front‑face and interface dimensions to ensure interchangeability.
- Models and assembly technologies: Standardizes models (straight plug, right‑angle plug, square‑flange and bulkhead receptacles, adaptors) and assembly technologies - solder, clamp, and crimp.
- Materials and finishes: References product standards for acceptable materials and surface treatments (see product standard for details).
- Test methods and qualification: Lists applicable electrical, mechanical and environmental tests (visual, dimensional, contact resistance, VSWR, insertion loss, RF leakage, voltage proof, corona, shock, vibration, climatic sequences, fluid resistance, salt mist, sand/dust, etc.). Tests reference EN 2591 series and other aerospace test protocols.
- Quality assurance and marking: Specifies qualification and acceptance conditions, designation, marking and storage/packaging requirements suitable for aerospace procurement and lifecycle management.
Applications and who uses it
- Aerospace manufacturers and OEMs: Use EN 4652-001 to specify and procure qualified RF connectors for aircraft, satellites and airborne systems.
- Connector and cable assembly suppliers: Apply the standard to design, produce and test connector assemblies that must be intermateable with MIL‑PRF‑39012‑derived interfaces.
- Test laboratories and QA teams: Use the test matrix and acceptance criteria for qualification, incoming inspection and lot acceptance.
- Systems engineers and procurement: Reference the standard when defining component requirements, ensuring electrical performance (VSWR, insertion loss), mechanical durability, and environmental resistance for avionics RF links.
- Maintenance, repair & overhaul (MRO): Ensure replacement parts meet original qualification and intermateability requirements.
Related standards
- EN 4604-001 (cable technical specification)
- TR 6058 (cable code identification list)
- EN 2591 (elements of electrical/optical connection - test methods)
- MIL‑PRF‑39012 (U.S. connector performance reference)
- EN 2424, EN 3909, EN 9133 (marking, test fluids, quality management)
EN 4652-001 is essential for ensuring reliable, interchangeable coaxial RF connectors in aerospace applications and for aligning supplier production and test practices with recognized European and industry norms.
Frequently Asked Questions
SIST EN 4652-001:2015 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification". This standard covers: This European Standard specifies the required characteristics, test methods, qualification and acceptance conditions of coaxial, radio frequency connectors used with flexible radio frequency cables in accordance with EN 4604 001 and semi-rigid coaxial cables. This family of connectors is derived from MIL-PRF-39012. Front face dimensions are identical and products are fully intermateable. Cables usable with present specification are listed in TR 6058.
This European Standard specifies the required characteristics, test methods, qualification and acceptance conditions of coaxial, radio frequency connectors used with flexible radio frequency cables in accordance with EN 4604 001 and semi-rigid coaxial cables. This family of connectors is derived from MIL-PRF-39012. Front face dimensions are identical and products are fully intermateable. Cables usable with present specification are listed in TR 6058.
SIST EN 4652-001:2015 is classified under the following ICS (International Classification for Standards) categories: 31.220.10 - Plug-and-socket devices. Connectors; 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 4652-001:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Hochfrequenz Steckverbinder, koaxial - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 001 : Spécification techniqueAerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4652-001:2015SIST EN 4652-001:2015en,fr,de01-september-2015SIST EN 4652-001:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4652-001
May 2015 ICS 49.060 English Version
Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification
Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 001: Spécification technique
Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 14 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4652-001:2015 ESIST EN 4652-001:2015
1) All parts quoted in this European Standard. 2) Published by: DoD National (US) Mil. Department of Defense. http://www.defenselink.mil/ 3) Published as ASD-STAN Technical Report at the date of publication of this European Standard. http://www.asd-stan.org/ SIST EN 4652-001:2015
— -on coupling. — -on coupling. —
— -on coupling — -on coupling 4.2 Models of connectors Models of connectors are defined in this European Standard. — Model code 0: straight plug. — Model code 1: right angle plug. — Model code 2: square flange receptacle. — Model code 3: bulkhead receptacle. — Model code 4: adaptor. 4.3 Technologies of assembly Cable and connector assemblies are defined in this European Standard. — Code 0: solder type. — Code 1: clamp type. — Code 2: crimp type. 4.3.1 Solder technology The core and the braid of the cable are soldered to the connector. 4.3.2 Clamp technology The core of the cable is plugged into the centre contact. A clamp nut fixes the braid of the cable onto the body of the connector (see product standard). SIST EN 4652-001:2015
See Figure 1 and Table 1. SIST EN 4652-001:2015
Key 1 REF. Plane Figure 1 — BNC plug interface Table 1 — BNC plug dimensions Dimensions in millimetres
Ø A Ø B Ø C Ø D E F H K L M Ø N P Q S T Ø U V min. 9,78 − 4,83 1,32 5,33 0,15 11,76 2,31 0,08 179° − 5,28 1,98 0,46 4,57 3,15 14,5° max. 9,91 8,31 − 1,37 5,84 − 12,01 2,46 − 181° 0,64 5,79 − 0,56 4,67 − 15,5° NOTE Slotted and flared to meet electrical and mechanical performance. 5.2.1.2
See Figure 2 and Table 2. SIST EN 4652-001:2015
Key 1 REF. Plane Figure 2 — BNC receptacle interface Table 2 — BNC receptacle dimensions Dimensions in millimetres
Ø A Ø B Ø C Ø D Ø E F G Ø H J L Ø M Ø N P Ø Q R S T U min. 10,97 9,60 8,31 8,10 − 5,18 8,31 1,91 4,72 4,95 2,06 8,79 − − 0,38 10,52 4,78 179° max. 11,07 9,70 8,46 8,15 4,72 5,28 8,51 2,06 5,23 − 2,21 9,04 0,15 6,5 0,76 − 5,28 181° NOTE 1 Q dimension applies to that portion (if applicable) of the dielectric which protrudes beyond the metal shoulder (or reference plane) by dimension P. NOTE 2 Clearance for mating connector coupling nut. SIST EN 4652-001:2015
Key 1 REF. Plane Figure 3a — TNC plug style A interface Table 3a — TNC plug style A dimensions Dimensions in millimetres
Ø A Ø B Ø C Ø D F G H J K L M P Ø Q Ø R min. 1,32 4,83 − 11,18 3,96 5,28 − 0,15 0,08 5,33 1,60 1,98 − − max. 1,37 − 8,31 − − 5,79 1,98 − 1,02 5,84 − − 8,18 0,64 NOTE Flared to meet electrical and mechanical performance. SIST EN 4652-001:2015
See Figure 3b and Table 3b. Dimensions in millimetres
Key 1 REF. Plane Figure 3b — TNC plug style B interface Table 3b — TNC plug style B dimensions Dimensions in millimetres
Ø A Ø B Ø C Ø D F G H K L M P Ø R min. 1,32 6,05 − 11,18 3,96 5,28 − 0,08 5,33 1,60 1,98 − max. 1,37 6,15 8,09 − − 5,79 1,98 1,02 5,84 − − 0,64 SIST EN 4652-001:2015
See Figure 3c and Table 3c. Dimensions in millimetres
Key 1 REF. Plane Figure 3c — TNC plug style C interface Table 3c — TNC plug style C dimensions Dimensions in millimetres
Ø A Ø B Ø C Ø D F G H J K L M P Ø Q Ø R min. 1,32 4,83 − 11,18 3,96 5,28 − 0,15 0,08 5,33 1,60 1,98 − − max. 1,37 − 8,09 − − 5,79 1,98 − 1,02 5,84 − − 8,18 0,64 SIST EN 4652-001:2015
See Figure 4 and Table 4. Dimensions in millimetres
Key 1 REF. Plane Figure 4 — TNC receptacle interface Table 4 — TNC receptacle dimensions Dimensions in millimetres
Ø A Ø B Ø C Ø D Ø E Ø F G H J K L M N P Ø Q R min. − 8,10 8,31 8,79 9,60 2,06 8,31 1,73 − 4,72 4,78 4,75 0,38 10,52 − 4,95 max. 4,72 8,15 8,46 9,04 9,68 2,21 8,51 2,24 0,15 5,23 5,28 − 0,76 − 6,50 − NOTE 1 Q dimension applies to that portion (if applicable) of the dielectric which protrudes beyond the metal shoulder (or reference plane) by dimension J. NOTE 2 Clearance for mating connector coupling nut. SIST EN 4652-001:2015
See Figure 5 and Table 5. Dimensions in millimetres
Key 1 REF. Plane Figure 5 — N plug interface Table 5 — N plug dimensions Dimensions in millimetres
A B C D E F G Ø H Ø J Ø K Ø M Ø N min. 0,08 2,79 5,33 0,41 4,50 4,01 10,11 7,98 16,0 20,90 1,60 − max. 1,03 3,56 5,84 1,52 − 4,27 10,46 8,38 − 21,7 1,68 0,25 NOTE 1 Slots optional (flared to meet electrical and mechanical performance). NOTE 2 Compensating ring optional. NOTE 3 Radius or chamfer, shape of tip optional. SIST EN 4652-001:2015
See Figure 6 and Table 6. Dimensions in millimetres
Key 1 REF. Plane Figure 6 — N receptacle interface Table 6 — N receptacle dimensions Dimensions in millimetres
A B C D E F Ø G Ø H Ø J Ø K Ø L M min. 9,04 4,75 1,19 4,37 6,76 10,72 − 8,03 8,53 − 3,02 5,33 max. 9,19 5,26 1,96 5,13 − − 7,06 8,13 8,74 15,93 3,15 − NOTE Clearance for mating connector coupling nut. SIST EN 4652-001:2015
See Figure 7 and Table 7. Dimensions in millimetres
Key 1 REF. Plane Figure 7 — C plug interface SIST EN 4652-001:2015
Ø A Ø B Ø C Ø E Ø F G H J K N min. 13,79 7,01 4,93 2,29 − 0,18 7,80 7,85 4,85 7,54 max. 13,94 − − 2,34 1,27 − 8,56 − 6,38 7,72
Ø P Ø Q R S Ø T U V W X Ø Y min. − − 44,5° 179,5° 3,33 14,5° 2,62 0,25 2,64 15,54 max. 19,84 11,18 45,5° 180,5° 3,58 15,5° 2,87 0,41 2,90 − 5.2.4.2
See Figure 8 and Table 8. Dimensions in millimetres
Key 1 REF. Plane Figure 8 — C receptacle interface SIST EN 4652-001:2015
Ø A Ø B Ø C Ø D Ø E Ø F Ø G Ø H Ø J min. 14,99 13,46 12,32 11,18 10,44 − − − 3,02 max. 15,24 13,72 12,57 11,43 10,54 9,50 6,91 4,83 3,15
K L Ø M N P Q R S T min. 8,43 7,80 2,24 − 7,62 179° 6,93 − 12,57 max. 8,59 7,95 2,49 0,18 − 181° 7,70 7,85 − NOTE Clearance for mating connector coupling nut. 5.2.5 Type 5 connectors HN interface 5.2.5.1
See Figure 9 and Table 9. Dimensions in millimetres
Key 1 REF. Plane Figure 9 — HN plug interface SIST EN 4652-001:2015
Ø A Ø AA Ø B Ø D E F G H J Ø L Ø M P Ø R T Ø V W min. 19,30 − − 1,60 9,10 9,33 0,13 3,50 3,05 − − − 7,34 2,54 6,69 10,24 max. − 23,50 14,50 1,68 9,85 − − − − 0,38 3,35 1,48 − − − − NOTE Flared to meet electrical and mechanical performance. 5.2.5.2
See Figure 10 and Table 10. Dimensions in millimetres
Key 1 REF. Plane Figure 10 — HN receptacle interface SIST EN 4652-001:2015
Ø A AB AK Ø B Ø C E F G K Ø M Ø R T U Ø V W min. 16,80 9,02 − 13,92 14,50 8,33 − − 14,99 − − 1,96 13,11 − 9,12 max. 17,35 − 19,18 14,05 14,68 9,09 9,35 0,13 − 3,35 7,47 2,21 13,26 6,81 − 5.2.6 Type 6 connectors SMA interface 5.2.6.1
See Figure 11 and Table 11. Dimensions in millimetres
Key 1 REF. Plane Figure 11 — SMA plug interface Table 11 — SMA plug dimensions Dimensions in millimetres
Ø A Hex AA Ø B Ø D E F J Ø L P Ø Q T W min. 6,35 7,85 − 0,90 0,00 0,00 − − − − 0,38 2,16 max. − 8,00 4,59 0,94 0,25 0,25 2,54 0,38 3,43 4,18 1,14 − SIST EN 4652-001:2015
See Figure 12 and Table 12. Dimensions in millimetres
Key 1 REF. Plane Figure 12 — SMA receptacle Interface Table 12 — SMA receptacle dimensions Dimensions in millimetres
Ø A AB Ø B E F K Ø M Ø Q T U W min. 5,28 2,67 4,60 0,00 0,00 5,54 1,24 − 0,38 1,88 4,32 max. 5,49 − − 0,25 0,25 − 1,29 4,18 1,14 1,98 − NOTE Clearance for mating connector coupling nut. SIST EN 4652-001:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...