SIST EN 13301:2010
(Main)Bitumen and bituminous binders - Determination of staining tendency of bitumen
General Information
- Abstract
This document specifies a method for the determination of the staining tendency of bitumen.
This method is applicable to bitumen having a Ring-and-Ball softening point greater than or equal to 80 °C. For softer bitumen, the test conditions may be modified by agreement between the involved parties.
The procedure described in this document may be used to compare results against a material for which the staining tendency is known.
NOTE Staining properties are related to the colloidal stability of the bitumen with higher values indicating lower stability.
WARNING The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
- Status
- Published
- Public Enquiry End Date
- 09-Sep-2008
- Publication Date
- 06-May-2010
- Technical Committee
- VLA - Water proofing
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 03-May-2010
- Due Date
- 08-Jul-2010
- Completion Date
- 07-May-2010
Overview
SIST EN 13301:2010 establishes a standardized method for determining the staining tendency of bitumen and bituminous binders. This standard is essential in the construction and materials industries for evaluating bitumen products, especially where risk of staining or material compatibility is a concern. It is specifically applicable to bitumen with a Ring-and-Ball softening point of 80°C or higher, though the procedure can be modified for softer bitumen by mutual agreement. Staining properties are closely related to the colloidal stability of bitumen, and higher staining values typically indicate lower stability.
Key Topics
- Staining Tendency Definition: Refers to the inclination of bitumen’s oil components to separate and potentially cause staining of adjacent materials. This can impact bitumen-based roofing, sealing, and construction applications.
- Scope of Applicability: Primarily covers bitumen and bituminous binders suitable for applications where high temperature softening points are required. The method outlined is comparative, allowing results to be benchmarked against reference materials.
- Test Method:
- Preparation and sampling procedures to ensure consistency and reliability.
- Use of specified apparatus, including rings, filter papers, and ovens.
- Detailed step-by-step instructions for sample conditioning, measurement, and calculation of stained ring width.
- Safety Considerations: Handling bitumen and related equipment involves potential hazards. Users are responsible for implementing safety practices and ensuring regulatory compliance.
Applications
- Roofing Materials: Assessing the staining tendency of bitumen used in roofing membranes, sheets, or coatings to minimize the risk of unwanted staining during service life or storage.
- Pavement and Road Construction: Specification of bituminous binders for highways and infrastructure to ensure performance standards and material compatibility.
- Material Comparison and Quality Control: Enables manufacturers, laboratories, and quality control departments to compare different batches or formulations, ensuring that bitumen products meet project requirements and industry standards.
- Research and Development: Provides a reliable method to evaluate and improve the colloidal stability and overall quality of new bituminous formulations or additives.
Related Standards
- EN 58: Procedures for the sampling of bitumen and bituminous binders, essential for ensuring representative and reliable test results.
- EN 1427: Details the determination of the softening point of bitumen (Ring and Ball method), referenced for apparatus and procedure alignment with SIST EN 13301:2010.
- EN 12594: Guidelines for the preparation of bituminous test samples, crucial for consistency across laboratory testing.
Practical Value
Compliance with SIST EN 13301:2010 ensures that bitumen products are evaluated for staining properties in a consistent, reproducible manner. This supports quality assurance, enhances material performance, and strengthens trust between suppliers and users. Adhering to this standard helps prevent material incompatibility issues and potential damage to structures, driving better outcomes in civil engineering and construction projects. Employing standardized test methods also aligns with regulatory and industry requirements, supporting both domestic and international acceptance of bitumen products.
Relations
- Replaces
SIST EN 13301:2003 - Bitumen and bituminous binders - Determination of staining tendency of bitumen - Effective Date
- 01-Jun-2010
- Effective Date
- 27-May-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
SIST EN 13301:2010 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Bitumen and bituminous binders - Determination of staining tendency of bitumen". This standard covers: This document specifies a method for the determination of the staining tendency of bitumen. This method is applicable to bitumen having a Ring-and-Ball softening point greater than or equal to 80 °C. For softer bitumen, the test conditions may be modified by agreement between the involved parties. The procedure described in this document may be used to compare results against a material for which the staining tendency is known. NOTE Staining properties are related to the colloidal stability of the bitumen with higher values indicating lower stability. WARNING The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
This document specifies a method for the determination of the staining tendency of bitumen. This method is applicable to bitumen having a Ring-and-Ball softening point greater than or equal to 80 °C. For softer bitumen, the test conditions may be modified by agreement between the involved parties. The procedure described in this document may be used to compare results against a material for which the staining tendency is known. NOTE Staining properties are related to the colloidal stability of the bitumen with higher values indicating lower stability. WARNING The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
SIST EN 13301:2010 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13301:2010 has the following relationships with other standards: It is inter standard links to SIST EN 13301:2003, SIST EN 1427:2026, SIST EN 1427:2015, SIST EN 58:2012, SIST EN 12594:2025, SIST EN 13304:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13301:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 13301:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHQWHBitumen und bitumenhaltige Bindemittel - Bestimmung der Ausölneigung von BitumenBitumes et liants bitumineux - Determination de la tendance à l'exsudation des bitumesBitumen and bituminous binders - Determination of staining tendency of bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13301:2010SIST EN 13301:2010en,fr,de01-junij-2010SIST EN 13301:2010SLOVENSKI
STANDARDSIST EN 13301:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13301
March 2010 ICS 75.140; 91.100.50 Supersedes EN 13301:2003English Version
Bitumen and bituminous binders - Determination of staining tendency of bitumen
Bitumes et liants bitumineux -Determination de la tendance à l'exsudation des bitumes
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausölneigung von Bitumen This European Standard was approved by CEN on 23 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13301:2010: ESIST EN 13301:2010
...