oSIST prEN 16904:2024
(Main)Plastics piping systems inside the building structure - Environmental product declarations - Product category rules complementary to EN 15804
Plastics piping systems inside the building structure - Environmental product declarations - Product category rules complementary to EN 15804
This document specifies product category rules (PCR) for Environmental Product Declarations (EPDs), as described in EN ISO 14025 and EN 15942.
This document is applicable to:
- functional unit as plastics piping systems inside the building structure;
- declared unit as one or more main structural components which are represented by pipes and fittings, as specified by the list of product standards provided in Annex CC.
This document gives guidelines for:
- both pressure and non-pressure applications;
- metal fittings (including manifolds) which are used in a plastic piping system.
The intended function of the system considered is to convey liquids according to EN 806 (for potable water supply), EN 1264 (for heating and cooling systems), EN 12828 (for radiators), EN 12056 (for soil and waste discharge and for water traps).
This document specifies product category rules of construction products as defined in and is intended to be used in conjunction with EN 15804+A2.
This document provides in Annex DD a non-exhaustive list of application fields. In addition, the insulated pipes are not in the scope of this document.
In addition to EN 15804+A2, this document specifies:
- the functional unit (consisting of pipes, fittings and ancillary components) and declared unit (consisting of pipes and/or fittings);
- the system boundaries and additional mandatory modules to be declared;
- the processes to be included in the installation phase;
- scenarios for module A4, A5;
- reference service life (RSL);
- end of life scenarios.
Kunststoff-Rohrleitungssysteme innerhalb der Gebäudestruktur - Umweltproduktdeklarationen - Produktkategorieregeln entsprechend EN 15804
Dieses Dokument legt Produktkategorieregeln (PCR, en: product category rules) für Umweltproduktdeklarationen (EPD, en: environmental product declarations) fest, wie in EN ISO 14025 und EN 15942 beschrieben.
Dieses Dokument ist anwendbar für:
- die funktionale Einheit wie Kunststoff-Rohrleitungssysteme innerhalb der Gebäudestruktur;
- die deklarierte Einheit als ein oder mehrere wesentliche strukturelle Bauteile, die durch Rohre und Formstücke repräsentiert werden, wie in der Liste der Produktnormen in Anhang C festgelegt.
Dieses Dokument enthält Leitlinien für:
- sowohl Druck- als auch drucklose Anwendungen;
- Metall-Formstücke (einschließlich Verteiler), die im Kunststoff-Rohrleitungssystem verwendet werden.
Die vorgesehene Funktion des betrachteten Systems ist der Transport von Flüssigkeiten nach EN 806 (für die Trinkwasserversorgung), EN 1264 (für Heiz- und Kühlsysteme), EN 12828 (für Heizkörper/Heizflächen), EN 12056 (für Abwasser und Geruchverschlüsse).
Dieses Dokument legt die Produktkategorieregeln für Bauprodukte fest, wie in EN 15804+A2 festgelegt, und ist für die Anwendung in Verbindung mit EN 15804+A2 vorgesehen.
Dieses Dokument enthält in Anhang D eine unvollständige Liste von Anwendungsbereichen. Darüber hinaus liegen isolierte Rohre nicht im Anwendungsbereich dieses Dokuments.
Wie auch EN 15804+A2 legt dieses Dokument Folgendes fest:
- die funktionale Einheit (bestehend aus Rohren, Formstücken sowie zusätzlichen Bauteilen) und die deklarierte Einheit (bestehend aus Rohren und/oder Formstücken);
- die Systemgrenzen und die zusätzlich zu deklarierenden Pflichtmodule;
- die in die Verlegungsphase einzubeziehenden Prozesse;
- Szenarien für Module A4, A5;
- Referenz-Nutzungsdauer (RSL);
- Szenarien für die Entsorgung.
Systèmes de canalisations en plastique à l’intérieur de la structure du bâtiment - Déclarations environnementales des produits - Règles régissant les catégories de produits complémentaires de l’EN 15804
Le présent document spécifie les règles régissant les Déclarations environnementales de produits (DEP), telles que décrites dans l’EN ISO 14025 et l’EN 15942.
Le présent document s’applique à :
- l’unité fonctionnelle correspondant aux systèmes de canalisations en plastique enterrés à l’extérieur de la structure du bâtiment ;
- l’unité déclarée correspondant à un ou plusieurs composants structurels principaux, tels que spécifiés dans la liste des normes de produits fournie dans l’Annexe CC.
Le présent document donne des lignes directrices pour :
- les applications avec pression et sans pression ;
- les raccords métalliques (y compris les manifolds) utilisés dans un système de canalisations en plastique.
La fonction prévue du système considéré est de transporter des fluides conformément à l’EN 806 (pour l’alimentation en eau potable), à l’EN 1264 (pour les systèmes de chauffage et de refroidissement), à l’EN 12828 (pour les radiateurs), l’EN 12056 (pour l’évacuation des eaux vannes et des eaux usées et pour les siphons à eau).
Le présent document spécifie les règles régissant les catégories de produits des produits de construction définies dans l’EN 15804+A2 et est destinée à être utilisée en association avec cette norme.
Le présent document fournit à l'Annexe DD une liste non exhaustive de domaines d'application. En outre, les tubes isolés sont en dehors du domaine d’application du présent document.
En plus de l’EN 15804+A2, le présent document spécifie :
- l’unité fonctionnelle (constituée de tubes, raccords et composants auxiliaires) et l’unité déclarée (constituée de tubes et/ou raccords) ;
- les frontières du système et les modules obligatoires additionnels à déclarer ;
- les processus à inclure dans la phase d’installation ;
- les scénarios pour les modules A4, A5 ;
- la durée de vie de référence (DVR) ;
- les scénarios de fin de vie.
Cevni sistemi iz polimernih materialov znotraj stavbne strukture - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov, ki dopolnjujejo EN 15804
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2024
Cevni sistemi iz polimernih materialov znotraj stavbne strukture - Okoljske
deklaracije za proizvode - Pravila za kategorije proizvodov, ki dopolnjujejo EN
Plastics piping systems inside the building structure - Environmental product declarations
- Product category rules complementary to EN 15804
Kunststoff-Rohrleitungssysteme innerhalb der Gebäudestruktur -
Umweltproduktdeklarationen - Produktkategorieregeln entsprechend EN 15804
Systèmes de canalisations en plastique à l’intérieur de la structure du bâtiment -
Déclarations environnementales des produits - Règles régissant les catégories de
produits complémentaires de l’EN 15804
Ta slovenski standard je istoveten z: prEN 16904
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
23.040.20 Cevi iz polimernih materialov Plastics pipes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 16904
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2024
ICS 23.040.20; 23.040.45; 91.010.99
English Version
Plastics piping systems inside the building structure -
Product category rules complementary to EN 15804
Kunststoff-Rohrleitungssysteme -
Umweltproduktdeklarationen -
Produktkategorieregeln ergänzend zu EN 15804 für
Kunststoff-Rohrleitungssysteme innerhalb von
Gebäuden
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 155.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16904:2024 E
worldwide for CEN national Members.
prEN 16904:2024 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Abbreviations . 8
5 General aspects . 8
5.1 Objective of the PCR for plastics piping systems inside buildings . 8
5.2 Types of EPD with respect to life cycle stages covered . 8
5.3 Comparability of EPD for construction products . 9
5.4 Additional information . 9
5.5 Ownership, responsibility and liability for the EPD . 9
5.6 Communication formats . 9
6 Product Category Rules for LCA . 10
6.1 Product category . 10
6.2 Life cycle stages and their information modules to be included . 10
6.2.1 General . 10
6.2.2 A1-A3, Product stage, information modules . 10
6.2.3 A4-A5, Construction process stage, information modules . 10
6.2.4 B1-B5, Use stage, information modules related to the plastics piping systems . 10
6.2.5 B6-B7, use stage, information modules related to the operation of the plastics piping
systems . 10
6.2.6 C1-C4 End-of-life stage, information modules . 10
6.2.7 D, Benefits and loads beyond the system boundary, information module . 10
6.3 Calculation rules for the LCA . 10
6.3.1 Functional or declared unit . 10
6.3.2 Functional unit . 10
6.3.3 Declared unit . 11
6.3.4 Reference service life (RSL). 12
6.3.5 System boundaries . 12
6.3.6 Criteria for the exclusion of inputs and outputs . 15
6.3.7 Selection of data . 16
6.3.8 Data quality requirements. 17
6.3.9 Developing product level scenarios . 18
6.3.10 Units . 18
6.4 Inventory analysis . 19
6.4.1 Collecting data . 19
6.4.2 Calculation procedures . 19
6.4.3 Allocation of input flows and output emissions . 19
6.4.4 Information on biogenic carbon content . 19
6.5 Impact assessment . 19
7 Content of the EPD . 19
7.1 Declaration of general information . 19
7.2 Declaration of environmental indicators derived from LCA . 20
prEN 16904:2024 (E)
7.3 Scenarios and additional technical information . 20
7.3.1 General . 20
7.3.2 Construction process stage . 20
7.3.3 B1-B7 use stage . 20
7.3.4 End-of-life . 20
7.4 Additional information on release of dangerous substances to, soil and ground
water during the use stage . 20
7.4.1 Indoor air . 20
7.4.2 Soil and ground water . 20
7.5 Aggregation of information modules . 20
8 Project report . 21
8.1 General . 21
8.2 LCA-related elements of the project report . 21
8.3 Documentation on additional information . 21
8.4 Data availability for verification . 21
9 Verification and validity of an EPD . 21
Annex AA (informative) Waste. 22
AA.1 End-of-waste . 22
AA.2 Properties of hazardous wastes for of EN 15804:2012+A2:2019 . 22
Annex BB (informative) Examples for functional and declared units . 23
BB.1 Example 1: Functional unit- Life cycle assessment of a PE-X hot and cold drinking
water system inside the building structure . 23
BB.2 Example 2: Functional unit - Life cycle assessment of a PVC-U Soil and Waste system
inside building structure . 25
BB.3 Example 3: Declared unit -Life Cycle Assessment of a Hot and Cold PE-X pipe . 27
Annex CC (normative) List of product and application standards . 29
Bibliography . 32
prEN 16904:2024 (E)
European foreword
This document (prEN 16904:2024) has been prepared by Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems”, the secretariat of which is held by NEN.
This document is currently submitted to the CEN Enquiry.
prEN 16904:2024 (E)
Introduction
The European standard EN 15804+A2 provides core product category rules for all construction
products and services. It provides a structure to ensure that all Environmental Product Declarations
(EPD) of construction products, construction services and construction processes are derived, verified
and presented in a harm
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.