SIST EN 60835-3-11:2002

SLOVENSKI STANDARD
01-oktober-2002
Methods of measurement for equipment used in digital microwave radio
transmission systems - Part 3: Measurements on satellite earth stations - Section
11: Service channel equipment for SCPC-PSK transmission (IEC 60835-3-11:1995)
Methods of measurement for equipment used in digital microwave radio transmission
systems -- Part 3: Measurements on satellite earth stations -- Section 11: Service
channel equipment for SCPC-PSK transmission
Meßverfahren für Geräte in digitalen Mikrowellen-Funkübertragungssystemen -- Teil 3:
Messungen an Satelliten-Erdfunkstellen -- Hauptabschnitt 11: Dienstkanaleinrichtungen
für SCPC-PSK-Übertragung
Méthodes de mesure applicables au matériel utilisé pour les systèmes de transmission
numérique en hyperfréquence -- Partie 3: Mesures applicables aux stations terriennes de
télécommunications par satellite -- Section 11: Equipement de voie de service pour
transmission SCPC-MDP
Ta slovenski standard je istoveten z: EN 60835-3-11:1995
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60835-3-11
Première
édition
STAN DARD
First edition
1995-02
Méthodes de mesure applicables au matériel
utilisé pour les systèmes de transmission
numérique en hyperfréquence
Partie 3:
Mesures applicables aux
stations terriennes
de télécommunications
par satellite
Section 11: Equipement de
voie de service
pour transmission SCPC-MDP
Methods of measurement for equipment used in
digital microwave radio transmission systems
Part 3:
Measurements on satellite earth stations
Section 11: Service channel equipment
for SCPC-PSK transmission
© IEC 1995 Droits
de reproduction réservés — Copyright - all rights reserved
Aucune partie de cette publication
ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit
et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris
la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de
l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC
Me1HayHapoimai 3nelcTpoTexHH4ecKaR KOMHCCHA
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue

835-3-11 ©IEC:1995 — 3 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
METHODS OF MEASUREMENT FOR EQUIPMENT USED
IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS –
Part 3: Measurements on satellite earth stations –
Section 11: Service channel equipment
for SCPC-PSK transmission
FOREWORD
1)
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
3) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
4)
In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 835-3-11 has been prepared by sub-committee 12E: Radio-
relay and fixed satellite communication systems of IEC technical committee 12: Radio-
commu nications.
The text of this standard is based on the following documents:
DIS Report on voting
12E(CO)170
12E/245/RVD
Full information on the voting for the approval of this standard can be found in the report
on voting indicated in the above table.
IEC 835 consists of the following parts, under the general title: Methods of measurement
for equipment used in digital microwave radio transmission systems and satellite earth
stations.
— Part 1: Measurements common to terrestrial radio-relay systems and satellite earth
stations
—
Part 2: Measurements on terrestrial radio-relay systems
— Part 3: Measurements on satellite earth stations.

835-3-11 © IEC:1995 - 5 -
METHODS OF MEASUREMENT FOR EQUIPMENT USED
IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS –
Part 3: Measurements on satellite earth stations –
Section 11: Service channel equipment
for SCPC-PSK transmission
1 Scope
This section of IEC 835-3 deals with measurements carried out on service channel
equipment utilizing SCPC-PSK (single-channel-per-carrier, phase-shift-keying) terminals.
The measurements described are applicable to se
rvice channel equipment with voice inter-
face. Measurements on se
rvice channel frequency control systems are not included.
2 Normative references
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this section of IEC 835-3. At the time of publication, the edi-
tions indicated were valid. All normative documents are subject to revision, and parties to
agreements based on this section of I
...