kSIST FprEN 16055:2026
(Main)Leather - Raw bovine hides and skins - Description, presentation and preservation
Leather - Raw bovine hides and skins - Description, presentation and preservation
This document specifies the following for raw bovine hides and skins intended for use throughout the leather manufacturing supply chain:
- Terms and definitions;
- Requirements for the presentation of raw hides and skins.
It is applicable to fresh and salted bovine hides and skins.
It outlines the opening cut and trim of hides and skins and the types of defects typically associated with this raw material.
NOTE 1 Opening cut and trim vary from country to country.
It shows which parts of hides and skins can be used for leather production and which factors influence the quality of hides and skins.
Furthermore, it gives recommendations on precautions to be taken for transport, preservation, loading and unloading.
NOTE 2 For commercial agreements between the buyer and the supplier of hides and skins, operators use the INTERNATIONAL CONTRACT No. 6 – HIDES and SKINS as drawn up by the International Council of Hides, Skins and Leather Traders Associations (ICHSLTA) and the International Council of Tanners (ICT) [1].
Leder - Rohe Rinderhäute und Kalbfelle - Beschreibung, Darstellung, Konservierung
Dieses Dokument legt Folgendes für rohe Rinderhäute und Kalbfelle fest, die für die Verwendung in der gesamten Lieferkette der Lederherstellung vorgesehen sind:
- Begriffe;
- Anforderungen an die Darstellung von Rohhäuten und Fellen.
Dieses Dokument ist anwendbar für frische und salzkonservierte Rinderhäute und Kalbfelle.
Es beschreibt den Öffnungsschnitt und den Trimm von Häuten und Fellen sowie die Arten von Schäden, die typischerweise mit diesem Rohmaterial verbunden sind.
ANMERKUNG 1 Der Öffnungsschnitt und der Trimm unterscheiden sich von Land zu Land.
Es legt dar, welche Teile von Häuten und Fellen für die Herstellung von Leder verwendet werden können und welche Faktoren die Qualität von Häuten und Fellen beeinflussen.
Darüber hinaus enthält es Empfehlungen zu Vorsichtsmaßnahmen für den Transport, die Konservierung und das Be- und Entladen.
ANMERKUNG 2 Für kommerzielle Vereinbarungen zwischen dem Käufer und dem Lieferanten von Häuten und Fellen verwenden die Marktteilnehmer den INTERNATIONAL CONTRACT Nr. 6 – HIDES and SKINS, wie er vom International Council of Hides, Skins and Leather Traders Associations (ICHSLTA) und vom International Council of Tanners (ICT) ausgearbeitet wurde [1].
Cuir - Peaux brutes de bovins - Description, présentation et conservation
Le présent document spécifie les éléments suivants pour les peaux brutes de bovins destinées à être utilisées tout au long de la chaîne d’approvisionnement de la fabrication du cuir :
- termes et définitions ;
- règles de présentation des peaux brutes.
Il s’applique aux peaux de bovins fraîches et salées.
Le présent document n’a pas pour objectif de contrecarrer les accords commerciaux normalement conclus entre les acheteurs et les fournisseurs de peaux ; il convient au contraire qu’il puisse leur venir en appui. Ce document a pour objet d’éviter les désaccords entre les parties. Il est le résultat de discussions avec les représentants de l’agriculture, des abattoirs, des négociants en peaux et des tanneries. Il indique quelles parties des peaux peuvent être utilisées pour la production de cuir et quels facteurs influent sur la qualité des peaux.
Le présent document fournit en outre des recommandations relatives aux précautions à prendre concernant le transport, la conservation, le chargement et le déchargement, la sélection des peaux tannées, la classification des peaux, le poids, les pertes, l’exemption de taxes, l’identification des peaux.
Usnje - Surove goveje kože - Opis, predstavitev in ohranjanje
General Information
- Status
- Not Published
- Public Enquiry End Date
- 23-Apr-2025
- Technical Committee
- IUSN - Leather
- Current Stage
- 5020 - Formal vote (FV) (Adopted Project)
- Start Date
- 03-Apr-2026
- Due Date
- 22-May-2026
- Completion Date
- 03-Apr-2026
Relations
- Effective Date
- 06-Sep-2023
Overview
kSIST FprEN 16055:2026: Leather - Raw Bovine Hides and Skins - Description, Presentation and Preservation is a European standard developed by CEN/TC 289 “Leather”. This document sets out accepted terminology, requirements, and guidelines for the description, presentation, and preservation of fresh and salted raw bovine hides and skins across the leather supply chain. Its aim is to promote harmonized practices and to minimize misunderstandings in commercial transactions relating to raw hides and skins intended for leather production.
The standard provides clarity on terminology, defines quality criteria, and includes practical recommendations for handling, transport, and storage. It also outlines the procedures required to ensure raw hides and skins retain their intended quality through to processing, assisting stakeholders such as agriculture, slaughterhouses, skin traders, and tanneries.
Key Topics
- Terminology and Definitions: Establishes common vocabulary for raw bovine hide and skin types, weights, preservation methods, defects, and more, minimizing confusion in international trade.
- Presentation Requirements: Specifies rules for opening cuts and trimming to optimize skin yield and quality, recognizing that specifics may vary between countries.
- Defect Types and Classification: Identifies common defects in raw hides and skins, including flaying, natural, and preservation defects, with emphasis on prevention and correct categorization.
- Preservation Methods: Details guidelines for cooling, salting (both stacking and brining), and storage, focusing on temperature controls, rapid chilling, and salt use to prevent rot and bacterial damage.
- Transport and Handling: Recommends best practices for transporting hides and skins, such as correct packaging, temperature monitoring, and handler responsibilities during loading and unloading.
- Quality Assurance: Encourages upstream and downstream communication within the supply chain to ensure transparency and continuous improvement in hide and skin quality.
- Commercial Considerations: Notes relevance to international contracts, including the commonly used INTERNATIONAL CONTRACT No. 6 – HIDES and SKINS.
Applications
kSIST FprEN 16055:2026 applies to all stakeholders involved in the production, processing, and trading of raw bovine hides and skins, specifically:
- Slaughterhouses and Skin Processing Facilities: To ensure hides and skins are trimmed, preserved, and presented to standard, improving usability and reducing waste.
- Leather Manufacturers and Tanneries: For sourcing consistent raw material quality, reducing processing issues arising from defects or poor preservation.
- Traders and Exporters: To support seamless transactions by providing a clear reference framework for contracts and product descriptions.
- Logistics and Transport Providers: For correct handling and temperature management to avoid spoilage and preservation defects during transit.
- Regulators and Inspectors: For setting and verifying compliance benchmarks within the leather industry.
The standard directly supports quality management, efficient processing, minimized losses, and smoother commercial agreements across the European and international leather supply chain.
Related Standards
For a comprehensive approach to hide and skin management and leather production, consider consulting these related standards:
- EN 16055:2012: Preceding version of the current standard, offering additional context on prior requirements.
- Commission Regulation (EU) No 142/2011: Sets out health rules regarding animal by-products, including hides and skins.
- INTERNATIONAL CONTRACT No. 6 – HIDES and SKINS (ICHSLTA & ICT): Standard contract framework for international hide and skin trading.
- Relevant ISO/IEC Terminology Databases: For up-to-date international definitions and harmonization.
- Other CEN Leather Standards: Covering further aspects of leather processing, testing, and classification.
By utilizing kSIST FprEN 16055:2026 alongside these references, organizations enhance quality, comply with international expectations, and ensure a reliable supply chain for leather production.
Keywords: leather standard, raw bovine hides, skin preservation, CEN, hide presentation, quality control, leather supply chain, hide trade, skin defects, European Standard.
Get Certified
Connect with accredited certification bodies for this standard

Control Union Certifications
Global certification for agriculture and sustainability.
Hohenstein Institut
Textile testing and certification.

Bureau Veritas Bangladesh
Bureau Veritas certification services in Bangladesh.
Sponsored listings
Frequently Asked Questions
kSIST FprEN 16055:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Leather - Raw bovine hides and skins - Description, presentation and preservation". This standard covers: This document specifies the following for raw bovine hides and skins intended for use throughout the leather manufacturing supply chain: - Terms and definitions; - Requirements for the presentation of raw hides and skins. It is applicable to fresh and salted bovine hides and skins. It outlines the opening cut and trim of hides and skins and the types of defects typically associated with this raw material. NOTE 1 Opening cut and trim vary from country to country. It shows which parts of hides and skins can be used for leather production and which factors influence the quality of hides and skins. Furthermore, it gives recommendations on precautions to be taken for transport, preservation, loading and unloading. NOTE 2 For commercial agreements between the buyer and the supplier of hides and skins, operators use the INTERNATIONAL CONTRACT No. 6 – HIDES and SKINS as drawn up by the International Council of Hides, Skins and Leather Traders Associations (ICHSLTA) and the International Council of Tanners (ICT) [1].
This document specifies the following for raw bovine hides and skins intended for use throughout the leather manufacturing supply chain: - Terms and definitions; - Requirements for the presentation of raw hides and skins. It is applicable to fresh and salted bovine hides and skins. It outlines the opening cut and trim of hides and skins and the types of defects typically associated with this raw material. NOTE 1 Opening cut and trim vary from country to country. It shows which parts of hides and skins can be used for leather production and which factors influence the quality of hides and skins. Furthermore, it gives recommendations on precautions to be taken for transport, preservation, loading and unloading. NOTE 2 For commercial agreements between the buyer and the supplier of hides and skins, operators use the INTERNATIONAL CONTRACT No. 6 – HIDES and SKINS as drawn up by the International Council of Hides, Skins and Leather Traders Associations (ICHSLTA) and the International Council of Tanners (ICT) [1].
kSIST FprEN 16055:2026 is classified under the following ICS (International Classification for Standards) categories: 59.140.20 - Raw skins, hides and pelts. The ICS classification helps identify the subject area and facilitates finding related standards.
kSIST FprEN 16055:2026 has the following relationships with other standards: It is inter standard links to SIST EN 16055:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
kSIST FprEN 16055:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16055:2025
01-april-2025
Usnje - Surove goveje kože - Opis, predstavitev in ohranjanje
Leather - Raw bovine hides and skins - Description, presentation and preservation
Leder - Rohe Rinderhäute und Kalbfelle - Beschreibung, Darstellung, Konservierung
Cuir - Peaux brutes de bovins - Description, présentation et conservation
Ta slovenski standard je istoveten z: prEN 16055
ICS:
59.140.20 Surove kože, kože in kožuhi Raw skins, hides and pelts
oSIST prEN 16055:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 16055:2025
oSIST prEN 16055:2025
DRAFT
EUROPEAN STANDARD
prEN 16055
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2025
ICS 59.140.20 Will supersede EN 16055:2012
English Version
Leather - Raw bovine hides and skins - Description,
presentation and preservation
Cuir - Peaux brutes de bovins - Description, Leder - Rohe Rinderhäute und Kalbfelle -
présentation et conservation Beschreibung, Darstellung, Konservierung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 289.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16055:2025 E
worldwide for CEN national Members.
oSIST prEN 16055:2025
prEN 16055:2025 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Rules for the presentation of raw bovine hides and skins . 11
4.1 General. 11
4.2 Requirements . 11
4.2.1 Hides and skins of cattle (excluding cowhides) . 11
4.2.2 Cowhides . 13
Annex A (normative) Guidelines for the preservation of raw bovine hides or skins . 14
Bibliography . 19
oSIST prEN 16055:2025
prEN 16055:2025 (E)
European foreword
This document (prEN 16055:2025) has been prepared by Technical Committee CEN/TC 289 “Leather”,
the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16055:2012.
EN 16055:2025 includes the following significant technical changes with respect to EN 16055:2012:
— addition of new terms and modifications of existing terms;
— update of existing figures and addition of new figures.
oSIST prEN 16055:2025
prEN 16055:2025 (E)
Introduction
It should be noted that raw hides, bovine hides and calfskins are natural products. As a result,
companies trading in these products do not have control over all their properties. All links in the chain
shall ensure that the best possible quality of the natural product skin is maintained. For this purpose,
controls shall take place in the respective stages, the results of which are then brought to the attention
of the preceding stage, so that they can work on improving the quality there.
oSIST prEN 16055:2025
prEN 16055:2025 (E)
1 Scope
This document specifies the following for raw bovine hides and skins intended for use throughout the
leather manufacturing supply chain:
— Terms and definitions;
— Rules for the presentation of raw hides and skins.
It applies to fresh and salted bovine hides and skins.
It is not the aim of this document to interfere with the normal commercial agreement between the
buyer and the supplier of hides and skins, on the contrary, it should be able to be used as a basis. This
document is intended to avoid disagreements between parties. It is the result of discussions with
representatives of agriculture, slaughterhouses, skin trade and tanneries. It shows which parts of hides
and skins can be used for leather production and which factors influence the quality of hides and skins.
Furthermore, it gives recommendations on precautions to be taken for transport, preservation, loading
and unloading, selection of tanned hides, classification of hides, weight, loss and tax exemption,
identification of hides.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1 Raw bovine hides and skins
3.1.1
calfskin
skin of very young cattle feeding predominantly on milk
Note 1 to entry: Typical ranges of weight (green weight) are: below 5 kg; 5,1 kg - 8 kg; 8,1 kg - 12 kg; 12,1 kg or
above.
Note 2 to entry: In the international trade calfskins are classified under HS code 4101 20: whole hides and skins,
unsplit, of a weight per skin exceeding 8 kg when simply dried; 10 kg when dry-salted or 16 kg when fresh, wet-
salted or otherwise preserved.
3.1.2
salted weight
weight of a skin after salting, which is inferior to the green weight
Note 1 to entry: The loss of weight can vary, depending on the amount of salt used, the time of curing and climate
conditions.
oSIST prEN 16055:2025
prEN 16055:2025 (E)
3.1.3
green weight
weight of fresh hides and skins from the slaughterhouse, after: trimming, appropriate deductions for
moisture in excess of the natural level and dung
Note 1 to entry: Light weight classes are usually traded on a salt weight basis, large cattle on a green weight basis.
3.1.4
kip skins
skin of a very young bovine already eating grass or other animal feed
Note 1 to entry: Typical ranges of weight (green weight) are: below 12 kg (12 minor) or above 12 kg (12 plus).
3.1.5
casualty calf skin
skins from animals that died naturally in the stable or during transport
3.2
cattle hide
skin of adult bovine animals
Note 1 to entry: Typical ranges of weight (green weight) are: from 20 kg - 24,5 kg from 25 kg - 29,5 kg, from 30 kg
- 39,5 kg, from 40 kg – 49,5 kg, from 50 kg – 59,5 kg, from 60 kg and more.
3.2.1
bull hide
skin of a male bovine animal (not castrated)
3.2.2
cowhide
skin of female bovine animals that have given birth to calves
3.2.3
ox hide
hide of a castrated male bovine animal
3.2.4
heifer hide
skin of female bovine animal that have not given birth to calves
3.3
opening the bovine hide and skin
give the skin or hide the shape required for its future use
Note 1 to entry: Ideal opening is a symmetrical opening (see Figure 1.)
3.4
trimming
process in which parts of the hide or skin, that are not suitable for subsequent leather production, are
removed
oSIST prEN 16055:2025
prEN 16055:2025 (E)
Key
1 head
2 mask
3 cheek
4 shoulder
5 foreleg
6 bend or croupon
7 belly
8 middle-belly
9 half-croupon
10 hind-leg
10+8+9 half culatta
5 right and left+4 avancorpo/front
8+10 / half-belly
Figure 1 — Different parts of the hide or skin after trimming
3.5
preservation (EU)
treatment to protect hide and skin from rotting after skinning until further processing in the tannery, by
cooling or by salting
3.5.1
cooling
hides and skins shall always be cooled as soon as possible after skinning, to significantly reduce
bacterial activity and avoid preservation defects
oSIST prEN 16055:2025
prEN 16055:2025 (E)
3.5.2
fresh hides and skins
to avoid salting, hides and skins are chilled to a temperature of less than 7 °C, but not below 0,3 °C
Note 1 to entry: Temperature not below 0,3 °C prevents hides and skins, or parts of them, from freezing during
the chilling process.
3.5.3
salting
salting shall be done promptly and with sufficient new and clean salt and the period between salting
and palletisation for delivery of hides shall be at least 8 days
Note 1 to entry: Used salt is acceptable as long as it is used in small quantities and its bacterial load is controlled.
3.6
defect
flaw
all damage to raw or preserved hides which may affect the quality of the leather produced
3.6.1 Flaying defects
3.6.1.1
cut
cut on the hide or skin by a knife or flaying tool on the flesh side that has cut into the dermis or skin
substance without completely penetrating the skin
Note 1 to entry: See Figure 2 – key 1.
3.6.1.2
hole
flaying damage caused by a knife or flaying tool on the flesh side, completely severing the skin
Note 1 to entry: See Figure 2 - key 2.
3.6.1.3
gouge
loss of substance of the skin on the flesh side caused by a knife or skinning tool without completely
perforating the skin
Note 1 to entry: See Figure 2 – key 3.
3.6.1.4
poorly cut head
head cut along a line not perpendicular to the longitudinal axis
Note 1 to entry: See Figure 4.
3.6.1.5
poorly shaped flanks
poorly-shaped legs
legs cut along a line not perpendicular to the opening cut of the leg or too long
Note 1 to entry: Poorly shaped legs are unusable (see Figure 4).
oSIST prEN 16055:2025
prEN 16055:2025 (E)
3.6.1.6
deformed skin
deformed hide
any deviation from the regular shape of the skin or coat due to unproper carcass opening or unproper
cutting and trimming
Note 1 to entry: See also Figure 4 for a regular shape of a skin.
3.6.1.7
grain break
grain burst
hide/skin puller damage occurring when they are removed from the animals at too high speed by the
hide puller
3.6.1.8
improper bleeding
incomplete and inadequate bleeding of the animal at the time of slaughter, resulting in clotted blood
remaining in the blood vessels and visible on the flesh side of the skin
Key
1 cut
2 hole
3 gouge
4 / wrong opening cut
Figure 2 — Examples of defects
oSIST prEN 16055:2025
prEN 16055:2025 (E)
3.6.2 Natural damage - defects to the skin of the living animal
3.6.2.1
mechanical defects
defects caused by brand marks, various scratches (barbed wire, brambles, transport or drag marks,
cattle fight marks, rope marks, etc.), spines, surgical operations, which may be open or healed (scars)
3.6.2.2
dung or urine damage
manure or urine damage visible on the skin that has affected or corroded the scarred side of the
hide/skin
3.6.2.3
damage caused by parasites
damage caused by sucking and biting parasites, such as mites (e.g., mange), lice, ticks, open and healed
wart holes
3.6.2.4
damage caused by diseases
damage caused by certain forms of micro-organisms such as bacteria, fungi (e.g., ringworm, valley
lichen) or viruses (e.g., warts)
3.6.2.5
wrinkling
shrunken, wrinkled scarred surface and growth marks of hide
3.6.2.6
other scarring damage
presence of wounds or abscesses, after-effects of injections or surgery
3.6.2.7
sun blisters
type of sunburn effect on the skin
Note 1 to entry: The outer layers dry out quickly, the inner layers collect the moisture. Hydrolysis can occur there,
which later leads to blistering (separation of the layers).
3.6.3 Preservation defects
3.6.3.1
poor preservation, heating, hair permeability
premature loosening of hair due to rotting of hides and skins, sometimes associated with ammonia
odour
3.6.3.2
defects caused by metal and salts
stains and damage caused by the deposition of metal compounds, especially iron salts
3.6.3.3
red discolouration
red to purple discolouration, often on the flesh side of salted hides and skins, caused by halophilic
bacteria
oSIST prEN 16055:2025
prEN 16055:2025 (E)
3.6.3.4
purple spots
purple discolouration on the flesh side of salted hides
3.6.3.5
decomposition or putrefaction
small depressions and channels visible on the flesh side where tissue has decomposed due to
putrefaction in the raw hide or skin
3.6.3.6
bacon beetle damage
cavities or perforations caused by the Dermestes beetle and its larvae
...




Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...