SIST ISO 7752-5:1997
(Main)Lifting appliances -- Controls -- Layout and characteristics -- Part 5: Overhead travelling cranes and portal bridge cranes
General Information
- Abstract
Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab driving, lifting, hoisting and lowering operations for these cranes as defined in ISO 4306-1.
- Status
- Published
- Publication Date
- 31-Oct-1997
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-1997
- Due Date
- 01-Nov-1997
- Completion Date
- 01-Nov-1997
Buy Documents
ISO 7752-5:1985 - Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead travelling cranes and portal bridge cranes Released:12/19/1985
ISO 7752-5:1985 - Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 5: Ponts roulants et ponts portiques Released:12/19/1985
ISO 7752-5:1985 - Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 5: Ponts roulants et ponts portiques Released:12/19/1985
Overview
SIST ISO 7752-5:1997 specifies the layout, arrangement, and operational characteristics of controls used in overhead travelling cranes and portal bridge cranes. Developed by the International Organization for Standardization (ISO) and adopted by SIST, this standard ensures that crane controls follow unified principles to reduce operator confusion, particularly in emergency situations. Its scope focuses on the direction of movement and configuration of primary controls for crane functions such as travelling, traversing, slewing, cab driving, hoisting, and lowering.
Effective implementation of this standard promotes operator safety and operational efficiency by providing clear guidance on control positioning and movement directions, aligning with ISO 4306-1's definitions for lifting appliances.
Key Topics
- Control Arrangement: Requirements for the location and orientation of crane controls, ensuring a consistent and ergonomic layout around the crane operator.
- Direction of Movement: Guidelines stipulate that controls should move in the same direction as the corresponding crane movement (e.g., joystick movements align with the direction of travel or hoisting).
- Types of Controls: Specification covers basic controls such as:
- Travelling and traversing
- Slewing
- Cab driving
- Main and auxiliary hoisting (raising/lowering)
- Load handling (grab open/close or other specialized functions)
- Operation Forces: Recommendations for lever and pedal actuation forces to match the operational demands, supporting consistent and reliable control by the operator.
- Operator Safety: Reduction of confusion and misoperation during both routine tasks and emergencies by unifying control principles across equipment types.
Applications
SIST ISO 7752-5:1997 applies to all manufacturers, designers, operators, and maintenance professionals involved with overhead travelling cranes and portal bridge cranes. Key practical applications include:
- Crane Manufacturing & Design: Ensures that newly built cranes offer a predictable and intuitive control arrangement, improving ease of training and reducing user errors.
- Operator Training: Provides a standardized reference for training crane operators, enabling them to quickly adapt between different cranes compliant with ISO 7752-5.
- Workplace Safety: Facilitates safer crane operations by decreasing the risk of incorrect control usage, particularly in emergency situations.
- Maintenance & Inspection: Aids inspectors in verifying that control layouts comply with international safety and functional standards.
Organizations adopting this standard can expect improved operator confidence, enhanced equipment interoperability, and better compliance with global lifting appliance regulations.
Related Standards
To ensure complete compliance and integration with broader safety and operational guidelines, organizations should consider these related standards:
- ISO 4306-1: Establishes the vocabulary and definitions for lifting appliances, providing the foundational terms referenced by ISO 7752-5.
- ISO 7752-1: Covers the general principles for layout and characteristics of lifting appliance controls, applicable across all types of cranes and hoists.
- Other Parts of ISO 7752 series: Specialized guidance for controls in different types of cranes and hoisting machinery.
Adoption of SIST ISO 7752-5:1997 alongside these related standards ensures a harmonized approach to crane safety, usability, and interoperability in industrial environments.
Relations
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
Buy Documents
ISO 7752-5:1985 - Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead travelling cranes and portal bridge cranes Released:12/19/1985
ISO 7752-5:1985 - Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 5: Ponts roulants et ponts portiques Released:12/19/1985
ISO 7752-5:1985 - Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 5: Ponts roulants et ponts portiques Released:12/19/1985
Frequently Asked Questions
SIST ISO 7752-5:1997 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Lifting appliances -- Controls -- Layout and characteristics -- Part 5: Overhead travelling cranes and portal bridge cranes". This standard covers: Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab driving, lifting, hoisting and lowering operations for these cranes as defined in ISO 4306-1.
Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab driving, lifting, hoisting and lowering operations for these cranes as defined in ISO 4306-1.
SIST ISO 7752-5:1997 is classified under the following ICS (International Classification for Standards) categories: 53.020.20 - Cranes. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ISO 7752-5:1997 has the following relationships with other standards: It is inter standard links to SIST EN 15011:2021, SIST EN 15011:2011+A1:2014, SIST EN 15011:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST ISO 7752-5:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-1997
'YLJDOQDRSUHPD8SUDYOMDQMH1DPHVWLWHYLQNDUDNWHULVWLNHGHO 0RVWQDLQ
NR]LþDVWDGYLJDOD
Lifting appliances -- Controls -- Layout and characteristics -- Part 5: Overhead travelling
cranes and portal bridge cranes
Appareils de levage -- Organes de service -- Disposition et caractéristiques -- Partie 5:
Ponts roulants et ponts portiques
Ta slovenski standard je istoveten z: ISO 7752-5:1985
ICS:
53.020.20 Dvigala Cranes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.MEJKAYHAPOAHAR OPrAHM3A~klR I-IO CTAHAAPTM3AIJMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Lifting appliances - Controls - Layout and
characteristics -
Part 5: Overhead travelling cranes and portal bridge
cranes
Apparels de levage - Organes de service
- Disposition et carat thristiques - Partie 5: Ponts roulants et ponts portiques
First edition - 1985-12-15
UDC 621.874 : 62-51 Ref. No. IS0 7752/5-1985 (E)
Descriptors : handling equipment, lifting equipment, cranes (hoists), control devices, layout.
Price based on 3 pages
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 7752/5 was prepared by Technical Committee ISO/TC 96,
Cranes, lifting appliances and related equipment.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organization f
...
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.MEJKAYHAPOAHAR OPrAHM3A~klR I-IO CTAHAAPTM3AIJMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Lifting appliances - Controls - Layout and
characteristics -
Part 5: Overhead travelling cranes and portal bridge
cranes
Apparels de levage - Organes de service
- Disposition et carat thristiques - Partie 5: Ponts roulants et ponts portiques
First edition - 1985-12-15
UDC 621.874 : 62-51 Ref. No. IS0 7752/5-1985 (E)
Descriptors : handling equipment, lifting equipment, cranes (hoists), control devices, layout.
Price based on 3 pages
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 7752/5 was prepared by Technical Committee ISO/TC 96,
Cranes, lifting appliances and related equipment.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless otherwise stated.
0 International Organization for Standardization, 1985
Printed in Switzerland
IS0 7752/5-1985 (E)
INTERNATIONAL STANDARD
Lifting appliances - Controls - Layout and
characteristics -
Part 5: Overhead travelling cranes and portal bridge
cranes
3 General requirements
0 Introduction
To reduce driver confusion or incorrect control in an emergen-
3.1 The basic controls for the crane shall comply with the re-
cy, this part of IS0 7752 unifies controls for certain types of
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIKAYHAPO~HAR OPTAHM3Al#lR f-l0 CTAH~APTbl3Al&lbl.ORGANISAilON INTERNATIONALE DE NORMALISATION
Appareils de levage - Organes de service - Disposition
et caractéristiques -
Partie 5: Ponts roulants et ponts portiques
lifting appliances - Controls - Layout and characteristics - Part 5: Overhead travelling cranes and porta/ bridge cranes
Première édition - 1985-12-15
CDU 621.874 : 62-51 Réf. no : ISO 7752/5-1985 (F)
Descripteurs : matériel de manutention, appareil de levage, grue, dispositif de commande, disposition.
Prix basé sur 3 pages
Avant-propos
LIS0 (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 7752/5 a été élaborée par le comité technique ISO/TC 96,
Grues, appareils de levage et équipements correspondants.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
0 Organisation internationale de normalisation, 1985
Imprimé en Suisse
ISO 7752/5-1985 (F)
NORME INTERNATIONALE
Appareils de levage - Organes de service - Disposition
et caractéristiques -
Partie 5: Ponts roulants et ponts portiques
3 Exigences générales
0 Introduction
Afin de réduire la confusion ou la possibilité d’une commande
3.1 Les organes de service de base des ponts roulants et
incorrecte du conducteur en cas d’urgence, la présente partie
des ponts portiques doivent satisfaire aux exigences de
de I
...
Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIKAYHAPO~HAR OPTAHM3Al#lR f-l0 CTAH~APTbl3Al&lbl.ORGANISAilON INTERNATIONALE DE NORMALISATION
Appareils de levage - Organes de service - Disposition
et caractéristiques -
Partie 5: Ponts roulants et ponts portiques
lifting appliances - Controls - Layout and characteristics - Part 5: Overhead travelling cranes and porta/ bridge cranes
Première édition - 1985-12-15
CDU 621.874 : 62-51 Réf. no : ISO 7752/5-1985 (F)
Descripteurs : matériel de manutention, appareil de levage, grue, dispositif de commande, disposition.
Prix basé sur 3 pages
Avant-propos
LIS0 (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
créé à cet effet. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO. Les Normes internationales sont approuvées confor-
mément aux procédures de I’ISO qui requièrent l’approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 7752/5 a été élaborée par le comité technique ISO/TC 96,
Grues, appareils de levage et équipements correspondants.
L’attention des utilisateurs est attirée sur le fait que toutes les Normes internationales
sont de temps en temps soumises à révision et que toute référence faite à une autre
Norme internationale dans le présent document implique qu’il s’agit, sauf indication
contraire, de la dernière édition.
0 Organisation internationale de normalisation, 1985
Imprimé en Suisse
ISO 7752/5-1985 (F)
NORME INTERNATIONALE
Appareils de levage - Organes de service - Disposition
et caractéristiques -
Partie 5: Ponts roulants et ponts portiques
3 Exigences générales
0 Introduction
Afin de réduire la confusion ou la possibilité d’une commande
3.1 Les organes de service de base des ponts roulants et
incorrecte du conducteur en cas d’urgence, la présente partie
des ponts portiques doivent satisfaire aux exigences de
de I
...