ISO 1998-1:1998
(Main)Petroleum industry — Terminology — Part 1: Raw materials and products
Petroleum industry — Terminology — Part 1: Raw materials and products
Industrie pétrolière — Terminologie — Partie 1: Matières premières et produits
La présente partie de l'ISO 1998 comporte une liste de termes équivalents anglais et français en usage dans l'industrie pétrolière pour désigner les matières premières et les produits pétroliers, accompagnés des définitions correspondantes dans les deux langues.L'ISO 1998 est destinée aux besoins de l'industrie pétrolière dans les domaines correspondants aux pétroles bruts et aux produits pétroliers, c'est-à-dire à toutes les opérations prenant place entre la production sur champ et l'utilisation finale. Elle n'entend pas couvrir le domaine des équipements pétroliers ni celui des opérations sur champ. Cependant, certains équipements ou certaines opérations d'exploration et de production sont définis. Ces termes n'ont été introduits que lorsqu'ils apparaissaient dans la définition d'un produit ou d'un procédé et quand leur définition semblait nécessaire à la compréhension ou afin d'éviter toute ambiguïté. La terminologie en matière d'équipement pétrolier relève de la compétence de l'ISO/TC 67, Matériel, équipement, structures en mer, pour les industries du pétrole et du gaz naturel.
Naftna industrija - Terminologija - 1. del: Surovine in proizvodi (vključuje tehnični popravek 1)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 1998-1:200
01-MXOLM
1DGRPHãþD
SIST ISO 1998-1:1996
1DIWQDLQGXVWULMD7HUPLQRORJLMDGHO6XURYLQHLQSURL]YRGLYNOMXþXMHWHKQLþQL
SRSUDYHN
Petroleum industry -- Terminology -- Part 1: Raw materials and products
Industrie pétrolière -- Terminologie -- Partie 1: Matières premières et produits
Ta slovenski standard je istoveten z: ISO 1998-1:1998
ICS:
01.040.75 Naftna in sorodna tehnologija Petroleum and related
(Slovarji) technologies (Vocabularies)
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST ISO 1998-1:200HQIU
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL ISO
STANDARD 1998-1
NORME
Second edition
Deuxième édition
INTERNATIONALE
1998-11-01
Petroleum industry — Terminology —
Part 1:
Raw materials and products
Industrie pétrolière — Terminologie —
Partie 1:
Matières premières et produits
Reference number
A
Numéro de référence
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 1998-1 was prepared by Technical Committee ISO/TC 28, Petroleum products and
lubricants, Subcommittee SC 1, Terminology.
This second edition, together with the other seven parts of ISO 1998, cancels and replaces all of the first edition,
which was composed of two parts (ISO 1998-1:1974 and ISO 1998-2:1976).
This new edition constitutes a full recast of the standard, with a new classification system for all terms of the two
parts of the first edition, which are now distributed in all parts of the new edition, and the addition of many new
terms.
ISO 1998 consists of the following parts, under the general title Petroleum industry — Terminology:
— Part 1: Raw materials and products
— Part 2: Properties and tests
— Part 3: Exploration and production
— Part 4: Refining
— Part 5: Transport, storage, distribution
— Part 6: Measurement
— Part 7: Miscellaneous terms
— Part 99: General and index
© ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher. / Droits de reproduction réservés. Sauf
prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun
procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland/Imprimé en Suisse
ii
© ISO ISO 1998-1:1998(E/F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités
membres votants.
La Norme internationale ISO 1998-1 a été élaborée par le comité technique ISO/TC 28, Produits pétroliers et
lubrifiants, sous-comité SC 1, Terminologie.
Cette deuxième édition, conjointement avec les sept autres parties de l'ISO 1998, annule et remplace la totalité de
la première édition qui comprenait deux parties (ISO 1998-1:1974 et ISO 1998-2:1976).
Cette nouvelle édition constitue une refonte complète de la norme, avec un nouveau système de classification des
termes des deux parties de la première édition, qui se trouvent maintenant répartis sur l'ensemble des parties de la
nouvelle édition, et l'ajout de nombreux nouveaux termes.
L’ISO 1998 comprend les parties suivantes, présentées sous le titre général Industrie pétrolière — Terminologie:
— Partie 1: Matières premières et produits
— Partie 2: Propriétés et essais
— Partie 3: Exploration et production
— Partie 4: Raffinage
— Partie 5: Transport, stockage, distribution
— Partie 6: Mesurage
— Partie 7: Termes divers
— Partie 99: Généralités et index
iii
INTERNATIONAL STANDARD
©
ISO ISO 1998-1:1998(E/F)
NORME INTERNATIONALE
Petroleum industry — Industrie pétrolière —
Terminology — Terminologie —
Part 1: Partie 1:
Matières premières et produits
Raw materials and products
1 Scope 1 Domaine d'application
This part of ISO 1998 consists of a list of equivalent La présente partie de l'ISO 1998 comporte une liste de
English and French terms, in use in the petroleum termes équivalents anglais et français en usage dans
industry to indicate raw materials or petroleum l'industrie pétrolière pour désigner les matières
products, together with the corresponding definitions in premières et les produits pétroliers, accompagnés des
the two languages. définitions correspondantes dans les deux langues.
ISO 1998 is intended to cover the purposes of the part L’ISO 1998 est destinée aux besoins de l’industrie
of the petroleum industry dealing with crude oils and pétrolière dans les domaines correspondants aux
petroleum products, that means all related operations pétroles bruts et aux produits pétroliers, c’est-à-dire à
arising from the production field to the final user. It is toutes les opérations prenant place entre la production
not intended to cover either petroleum equipment, or sur champ et l’utilisation finale. Elle n’entend pas
any operation in the field. However, some pieces of couvrir le domaine des équipements pétroliers ni celui
equipment or some operations of exploration and des opérations sur champ. Cependant, certains
production are defined. The corresponding terms were équipements ou certaines opérations d’exploration et
introduced only when they appear in a definition of a de production sont définis. Ces termes n’ont été
product or process and when their definition was introduits que lorsqu’ils apparaissaient dans la
found necessary for understanding or for avoiding any définition d’un produit ou d’un procédé et quand leur
ambiguity. Where a terminology of petroleum définition semblait nécessaire à la compréhension ou
equipment is needed, it corresponds to the scope of afin d’éviter toute ambiguïté. La terminologie en
ISO/TC 67, Materials, equipment and offshore matière d’équipement pétrolier relève de la
structures for petroleum and natural gas industries. compétence de l’ISO/TC 67, Matériel, équipement,
structures en mer, pour les industries du pétrole et du
gaz naturel.
2 Normative reference
2 Référence normative
The following standard contains provisions which,
La norme suivante contient des dispositions qui, par
through reference in this text, constitute provisions of
suite de la référence qui en est faite, constituent des
this International Standard. At the time of publication,
dispositions valables pour la présente Norme
the edition indicated was valid. All standards are
internationale. Au moment de la publication, l'édition
subject to revision, and parties to agreements based
indiquée était en vigueur. Toute norme est sujette à
on this International Standard are encouraged to
révision et les parties prenantes des accords fondés
investigate the possibility of applying the most recent
sur la présente Norme internationale sont invitées à
edition of the standard indicated below. Members of
rechercher la possibilité d'appliquer l'édition la plus
IEC and ISO maintain registers of currently valid
récente de la norme indiquée ci-après. Les membres
de la CEI et de l'ISO possèdent le registre des
© ISO
International Standards. Normes internationales en vigueur à un moment
donné.
1)
ISO 1998-99:— , Petroleum industry —
1)
Terminology — Part 99: General and index. ISO 1998-99:— , Industrie pétrolière —
Terminologie — Partie 99: Généralités et index.
3 Term numbering
3 Numérotation des termes
The general classification and numbering system used
Le système général de classification et de
in ISO 1998 employs digits grouped in three
numérotation, défini dans l'ISO 1998, est de la forme:
categories:
x.yy.zzz
x.yy.zzz
où
where
x est le numéro de partie de l'ISO 1998, ici
x is the part number of ISO 1998, in this case
Partie 1;
Part 1;
yy désigne la sous-catégorie dans laquelle le
yy is the subcategory in which the term appears.
terme apparaît. La Partie 1 a 12 sous-
Part 1 has 12 subcategories:
catégories:
05 crude petroleum and feedstocks for
05 pétroles bruts et charges d'alimentation
refineries
de raffinerie
15 gaseous products
15 produits gazeux
20 light distillates and intermediary products
20 distillats légers et produits intermédiaires
30 marine fuels
30 combustibles marine
40 bitumen and related products
40 bitumes et produits connexes
60 middle viscosity products, lubricants and
60produits de viscosité moyenne,
related products
lubrifiants et produits associés
70 heavy distillates and residues
70 distillats lourds et résidus
75 paraffins and related products
75 paraffines et produits associés
80 solid and semi-solid products
80 produits solides et pâteux
90 additives
90 additifs
95 miscellaneous
95 divers
99 acronyms
99 acronymes
zzz is the serial number of the individual term.
zzz est le numéro d'ordre de chaque terme.
4 Index
4 Index
See ISO 1998-99.
Se reporter à l'ISO 1998-99.
___________ ___________
1) To be published. 1) À publier.
© ISO
5 Order of listing
5 Présentation des termes
Terms are listed in serial number order.
La liste suivante est classée selon l'ordre numérique.
1.05 Crude petroleum and feedstocks 1.05 Pétrole brut et charges
for refineries d'alimentation de raffineries
1.05.000 1.05.000
petroleum pétrole
material consisting of, or derived from, a mixture of produit composé ou issu d'un mélange de
liquid or semi-solid organic compounds, principally constituants organiques liquides ou pâteux,
hydrocarbons principalement des hydrocarbures
1.05.005 1.05.005
crude oil pétrole brut
naturally occurring form of petroleum, mainly occuring pétrole naturel se trouvant principalement dans des
in a porous underground formation such as sandstone couches souterraines poreuses telles que les grès
1.05.010 1.05.010
paraffinic crude pétrole brut paraffinique
crude oil consisting essentially of paraffinic pétrole brut constitué essentiellement
hydrocarbons and aromatic and naphthenic ring d'hydrocarbures paraffiniques et de composés
compounds with paraffinic side chains comportant des cycles aromatiques ou naphténiques
avec des chaînes latérales paraffiniques
NOTE Such crudes may contain a high proportion of NOTE Ce type de bruts peut contenir une proportion
solid, waxy material at ambient temperature. élevée de produits qui sont solides ou pâteux à
température ambiante.
1.05.020 1.05.020
asphaltic crude pétrole brut asphaltique
heavy crude oil containing a high proportion of pétrole brut lourd contenant une proportion élevée
asphaltenes, aromatics and naphthenes, and which d'asphaltènes, d'aromatiques et de naphtènes, et qui
yields a residue suitable for the manufacture of permet d'obtenir un résidu adapté à la fabrication des
bitumens bitumes
1.05.030 1.05.030
naphthenic base crude pétrole brut naphténique
crude oil containing a substantial proportion of pétrole brut contenant une très forte proportion de
naphthenes (cycloparaffins) in some or all of the naphtènes (cycloparaffines) dans tout ou partie des
distillation fractions and residues fractions et résidus de distillation
1.05.040 1.05.040
aromatic crude pétrole brut aromatique
crude oil with a higher content of aromatic pétrole brut contenant des hydrocarbures de type
hydrocarbons than is generally found aromatique en quantité relativement plus importante
que dans les autres huiles minérales naturelles
1.05.050 1.05.050
mixed crude pétrole brut mixte
intermediate crude brut intermédiaire
crude oil whose atmospheric distillates contain a pétrole brut dont les distillats atmosphériques
higher than normal proportion of aromatic compounds contiennent une proportion supérieure à la normale de
composés aromatiques
© ISO
1.05.060 1.05.060
sour crude pétrole brut corrosif
crude oil containing a significant amount of corrosive pétrole brut contenant une quantité importante de
sulfur compounds composés soufrés corrosifs
1.05.070 1.05.070
non-corrosive crude pétrole brut non corrosif
sweet crude pétrole brut à faible teneur en composés soufrés
crude oil having a low content of volatile sulfur volatils, tels que le sulfure d'hydrogène et les
compounds such as hydrogen sulfide and mercaptans mercaptans
1.05.080 1.05.080
reduced crude pétrole brut réduit
product obtained after removal, by atmospheric produit obtenu après enlèvement, par distillation
distillation, of the light components of crude oil atmosphérique, des
...
INTERNATIONAL ISO
STANDARD 1998-1
NORME
Second edition
Deuxième édition
INTERNATIONALE
1998-11-01
Petroleum industry — Terminology —
Part 1:
Raw materials and products
Industrie pétrolière — Terminologie —
Partie 1:
Matières premières et produits
Reference number
A
Numéro de référence
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 1998-1 was prepared by Technical Committee ISO/TC 28, Petroleum products and
lubricants, Subcommittee SC 1, Terminology.
This second edition, together with the other seven parts of ISO 1998, cancels and replaces all of the first edition,
which was composed of two parts (ISO 1998-1:1974 and ISO 1998-2:1976).
This new edition constitutes a full recast of the standard, with a new classification system for all terms of the two
parts of the first edition, which are now distributed in all parts of the new edition, and the addition of many new
terms.
ISO 1998 consists of the following parts, under the general title Petroleum industry — Terminology:
— Part 1: Raw materials and products
— Part 2: Properties and tests
— Part 3: Exploration and production
— Part 4: Refining
— Part 5: Transport, storage, distribution
— Part 6: Measurement
— Part 7: Miscellaneous terms
— Part 99: General and index
© ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher. / Droits de reproduction réservés. Sauf
prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun
procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland/Imprimé en Suisse
ii
© ISO ISO 1998-1:1998(E/F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité
technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en
liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission
électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités
membres votants.
La Norme internationale ISO 1998-1 a été élaborée par le comité technique ISO/TC 28, Produits pétroliers et
lubrifiants, sous-comité SC 1, Terminologie.
Cette deuxième édition, conjointement avec les sept autres parties de l'ISO 1998, annule et remplace la totalité de
la première édition qui comprenait deux parties (ISO 1998-1:1974 et ISO 1998-2:1976).
Cette nouvelle édition constitue une refonte complète de la norme, avec un nouveau système de classification des
termes des deux parties de la première édition, qui se trouvent maintenant répartis sur l'ensemble des parties de la
nouvelle édition, et l'ajout de nombreux nouveaux termes.
L’ISO 1998 comprend les parties suivantes, présentées sous le titre général Industrie pétrolière — Terminologie:
— Partie 1: Matières premières et produits
— Partie 2: Propriétés et essais
— Partie 3: Exploration et production
— Partie 4: Raffinage
— Partie 5: Transport, stockage, distribution
— Partie 6: Mesurage
— Partie 7: Termes divers
— Partie 99: Généralités et index
iii
INTERNATIONAL STANDARD
©
ISO ISO 1998-1:1998(E/F)
NORME INTERNATIONALE
Petroleum industry — Industrie pétrolière —
Terminology — Terminologie —
Part 1: Partie 1:
Matières premières et produits
Raw materials and products
1 Scope 1 Domaine d'application
This part of ISO 1998 consists of a list of equivalent La présente partie de l'ISO 1998 comporte une liste de
English and French terms, in use in the petroleum termes équivalents anglais et français en usage dans
industry to indicate raw materials or petroleum l'industrie pétrolière pour désigner les matières
products, together with the corresponding definitions in premières et les produits pétroliers, accompagnés des
the two languages. définitions correspondantes dans les deux langues.
ISO 1998 is intended to cover the purposes of the part L’ISO 1998 est destinée aux besoins de l’industrie
of the petroleum industry dealing with crude oils and pétrolière dans les domaines correspondants aux
petroleum products, that means all related operations pétroles bruts et aux produits pétroliers, c’est-à-dire à
arising from the production field to the final user. It is toutes les opérations prenant place entre la production
not intended to cover either petroleum equipment, or sur champ et l’utilisation finale. Elle n’entend pas
any operation in the field. However, some pieces of couvrir le domaine des équipements pétroliers ni celui
equipment or some operations of exploration and des opérations sur champ. Cependant, certains
production are defined. The corresponding terms were équipements ou certaines opérations d’exploration et
introduced only when they appear in a definition of a de production sont définis. Ces termes n’ont été
product or process and when their definition was introduits que lorsqu’ils apparaissaient dans la
found necessary for understanding or for avoiding any définition d’un produit ou d’un procédé et quand leur
ambiguity. Where a terminology of petroleum définition semblait nécessaire à la compréhension ou
equipment is needed, it corresponds to the scope of afin d’éviter toute ambiguïté. La terminologie en
ISO/TC 67, Materials, equipment and offshore matière d’équipement pétrolier relève de la
structures for petroleum and natural gas industries. compétence de l’ISO/TC 67, Matériel, équipement,
structures en mer, pour les industries du pétrole et du
gaz naturel.
2 Normative reference
2 Référence normative
The following standard contains provisions which,
La norme suivante contient des dispositions qui, par
through reference in this text, constitute provisions of
suite de la référence qui en est faite, constituent des
this International Standard. At the time of publication,
dispositions valables pour la présente Norme
the edition indicated was valid. All standards are
internationale. Au moment de la publication, l'édition
subject to revision, and parties to agreements based
indiquée était en vigueur. Toute norme est sujette à
on this International Standard are encouraged to
révision et les parties prenantes des accords fondés
investigate the possibility of applying the most recent
sur la présente Norme internationale sont invitées à
edition of the standard indicated below. Members of
rechercher la possibilité d'appliquer l'édition la plus
IEC and ISO maintain registers of currently valid
récente de la norme indiquée ci-après. Les membres
de la CEI et de l'ISO possèdent le registre des
© ISO
International Standards. Normes internationales en vigueur à un moment
donné.
1)
ISO 1998-99:— , Petroleum industry —
1)
Terminology — Part 99: General and index. ISO 1998-99:— , Industrie pétrolière —
Terminologie — Partie 99: Généralités et index.
3 Term numbering
3 Numérotation des termes
The general classification and numbering system used
Le système général de classification et de
in ISO 1998 employs digits grouped in three
numérotation, défini dans l'ISO 1998, est de la forme:
categories:
x.yy.zzz
x.yy.zzz
où
where
x est le numéro de partie de l'ISO 1998, ici
x is the part number of ISO 1998, in this case
Partie 1;
Part 1;
yy désigne la sous-catégorie dans laquelle le
yy is the subcategory in which the term appears.
terme apparaît. La Partie 1 a 12 sous-
Part 1 has 12 subcategories:
catégories:
05 crude petroleum and feedstocks for
05 pétroles bruts et charges d'alimentation
refineries
de raffinerie
15 gaseous products
15 produits gazeux
20 light distillates and intermediary products
20 distillats légers et produits intermédiaires
30 marine fuels
30 combustibles marine
40 bitumen and related products
40 bitumes et produits connexes
60 middle viscosity products, lubricants and
60produits de viscosité moyenne,
related products
lubrifiants et produits associés
70 heavy distillates and residues
70 distillats lourds et résidus
75 paraffins and related products
75 paraffines et produits associés
80 solid and semi-solid products
80 produits solides et pâteux
90 additives
90 additifs
95 miscellaneous
95 divers
99 acronyms
99 acronymes
zzz is the serial number of the individual term.
zzz est le numéro d'ordre de chaque terme.
4 Index
4 Index
See ISO 1998-99.
Se reporter à l'ISO 1998-99.
___________ ___________
1) To be published. 1) À publier.
© ISO
5 Order of listing
5 Présentation des termes
Terms are listed in serial number order.
La liste suivante est classée selon l'ordre numérique.
1.05 Crude petroleum and feedstocks 1.05 Pétrole brut et charges
for refineries d'alimentation de raffineries
1.05.000 1.05.000
petroleum pétrole
material consisting of, or derived from, a mixture of produit composé ou issu d'un mélange de
liquid or semi-solid organic compounds, principally constituants organiques liquides ou pâteux,
hydrocarbons principalement des hydrocarbures
1.05.005 1.05.005
crude oil pétrole brut
naturally occurring form of petroleum, mainly occuring pétrole naturel se trouvant principalement dans des
in a porous underground formation such as sandstone couches souterraines poreuses telles que les grès
1.05.010 1.05.010
paraffinic crude pétrole brut paraffinique
crude oil consisting essentially of paraffinic pétrole brut constitué essentiellement
hydrocarbons and aromatic and naphthenic ring d'hydrocarbures paraffiniques et de composés
compounds with paraffinic side chains comportant des cycles aromatiques ou naphténiques
avec des chaînes latérales paraffiniques
NOTE Such crudes may contain a high proportion of NOTE Ce type de bruts peut contenir une proportion
solid, waxy material at ambient temperature. élevée de produits qui sont solides ou pâteux à
température ambiante.
1.05.020 1.05.020
asphaltic crude pétrole brut asphaltique
heavy crude oil containing a high proportion of pétrole brut lourd contenant une proportion élevée
asphaltenes, aromatics and naphthenes, and which d'asphaltènes, d'aromatiques et de naphtènes, et qui
yields a residue suitable for the manufacture of permet d'obtenir un résidu adapté à la fabrication des
bitumens bitumes
1.05.030 1.05.030
naphthenic base crude pétrole brut naphténique
crude oil containing a substantial proportion of pétrole brut contenant une très forte proportion de
naphthenes (cycloparaffins) in some or all of the naphtènes (cycloparaffines) dans tout ou partie des
distillation fractions and residues fractions et résidus de distillation
1.05.040 1.05.040
aromatic crude pétrole brut aromatique
crude oil with a higher content of aromatic pétrole brut contenant des hydrocarbures de type
hydrocarbons than is generally found aromatique en quantité relativement plus importante
que dans les autres huiles minérales naturelles
1.05.050 1.05.050
mixed crude pétrole brut mixte
intermediate crude brut intermédiaire
crude oil whose atmospheric distillates contain a pétrole brut dont les distillats atmosphériques
higher than normal proportion of aromatic compounds contiennent une proportion supérieure à la normale de
composés aromatiques
© ISO
1.05.060 1.05.060
sour crude pétrole brut corrosif
crude oil containing a significant amount of corrosive pétrole brut contenant une quantité importante de
sulfur compounds composés soufrés corrosifs
1.05.070 1.05.070
non-corrosive crude pétrole brut non corrosif
sweet crude pétrole brut à faible teneur en composés soufrés
crude oil having a low content of volatile sulfur volatils, tels que le sulfure d'hydrogène et les
compounds such as hydrogen sulfide and mercaptans mercaptans
1.05.080 1.05.080
reduced crude pétrole brut réduit
product obtained after removal, by atmospheric produit obtenu après enlèvement, par distillation
distillation, of the light components of crude oil atmosphérique, des constituants légers du pétrole
brut
1.05.90 1.05.90
topped crude pétrole brut étêté
long residue résidu long
crude oil which has been freed of gases, gasoline, pétrole brut qui a été débarrassé du gaz, de l'essence,
kerosine and gas oil du kérosène et du gasoil par élimination des fractions
de tête
1.05.100 1.05.100
feedstock charge d'alimentation
primary material introduced into a plant for processing produit de base introduit dans une installation en vue
de son traitement
1.05.110 1.05.110
natural gas condensate condensat de gaz naturel
liquid fractions produced during cooling and pressure fractions liquides qui se forment au cours des
operations in the production of marketed natural gas opérations de refroidissement et de pressurisation
lors de la production du gaz naturel commercial
1.05.120 1.05.120
shale oil huile de schiste
mineral oil obtained by the pyrolysis of oil-shale huile minérale obtenue par pyrolyse de schistes
bitumineux
1.05.122 1.05.122
asphaltic sands sables bitumineux
bituminous sands sables imprégnés de bitume, qui peuvent être extraits
oil sands par un solvant
tar sands
sands impregnated with bitumen which can be
extracted by a solvent
1.05.130 1.05.130
synthetic crude pétrole brut synthé
...
SLOVENSKI SIST ISO 1998-1
druga izdaja
STANDARD
november 2002
Naftna industrija – Terminologija - 1. del: Surovine in proizvodi
(enakovreden ISO 1998-1:1998 in popravku ISO 1998-1:1999)
Petroleum industry – Terminology - Part 1: Raw materials and products
Industrie pétrolière – Terminologie - Partie 1: Matières premières et produits
Deskriptorji:
Referenčna številka
ICS 01.040.75; 75.080 SIST ISO 1998-1:2002 (sl,en)
Nadaljevanje na straneh od 2 do 27
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.
SIST ISO 1998-1 : 2002
NACIONALNI UVOD
Standard SIST ISO 1998-1 (sl,en), Naftna industrija - Terminologija - 1. del: Surovine in proizvodi,
druga izdaja, 2002, ima status slovenskega standarda in je enakovreden mednarodnemu standardu
ISO 1998-1 (en), Petroleum industry – Terminology - Part 1: Raw materials and products, Second
edition, 1998-11-01, in popravku ISO 1998-1:1999.
NACIONALNI PREDGOVOR
Mednarodni standard ISO 1998-1:1998 je pripravil tehnični odbor Mednarodne organizacije za
standardizacijo ISO/TC 28 Naftni proizvodi in maziva.
Slovenski standard SIST ISO 1998-1:2002 je prevod mednarodnega standarda ISO 1998-1:1998. V
primeru spora glede besedila slovenskega prevoda v tem standardu je odločilen izvirni mednarodni
standard v angleškem jeziku. Slovensko-angleško izdajo standarda je pripravil tehnični odbor TC NAD
Naftni derivati.
Ta slovenski standard je dne 2002-10-02 odobrila direktorica SIST.
PREDHODNA IZDAJA
SIST ISO 1998-1:1996 (sl) Naftna industrija – Slovar – 1. del
SIST ISO 1998-2:1996 (sl) Naftna industrija – Slovar – 2. del
OPOMBI
– Povsod, kjer se v besedilu standarda uporablja izraz “mednarodni standard”, v
– Uvod in nacionalni predgovor nista sestavni del standarda.
SIST ISO 1998-1 : 2002
VSEBINA Stran
Predgovor …….4
1 Namen in področje uporabe ………………………………………….5
2 Zveza s standardi …………………………………………………….5
3 Oštevilčenje izrazov ………………… .5
4 Seznam ……………. .6
5 Zaporedje izrazov …………….6
SIST ISO 1998-1 : 2002
PREDGOVOR
ISO (Mednarodna organizacija za standardizacijo) je svetovna zveza nacionalnih organov za
standardizacijo (članov ISO). Priprava mednarodnih standardov navadno poteka v tehničnih odborih
ISO. Vsaka članica, ki želi delovati na področju, za katero je ustanovljen tehnični odbor, ima pravico
biti zastopana v tem odboru. Pri delu sodelujejo tudi vladne in nevladne mednarodne organizacije,
povezane z ISO. Pri vseh zadevah, ki so povezane s standardizacijo na področju elektrotehnike, ISO
tesno sodeluje z Mednarodno elektrotehniško komisijo (IEC).
Osnutki mednarodnih standardov, ki jih sprejemajo tehnični odbori, se pošiljajo članom v glasovanje.
Za izdajo mednarodnega standarda je potrebno soglasje najmanj 75 odstotkov članov, ki glasujejo.
Mednarodni standard ISO 1998-2 je pripravil tehnični odbor ISO/TC 28 Naftni proizvodi in maziva,
pododbor SC 1 Terminologija.
Ta druga izdaja, skupaj z ostalimi sedmimi deli standarda ISO 1998, razveljavlja in nadomešča prvo
izdajo, ki je bila sestavljena iz dveh delov (ISO 1998-1:1974 in ISO 1998-2:1976).
Ta nova izdaja popolnoma preoblikuje standard z novim sistemom klasifikacije za vse izraze v obeh
delih prve izdaje, ki so sedaj razporejeni v vseh delih nove izdaje, ter z mnogimi dodanimi novimi
izrazi.
ISO 1998 je sestavljen iz naslednjih delov pod skupnim naslovom Naftna industrija – Terminologija:
– 1. del: Surovine in proizvodi
– 2. del: Lastnosti in preskusi
– 3. del: Raziskovanje in pridobivanje
– 4. del: Rafiniranje
– 5. del: Transport, skladiščenje, distribucija
– 6. del: Meritve
– 7. del: Različni izrazi
– 99. del: Splošno in seznam
SIST ISO 1998-1 : 2002
Naftna industrija – Terminologija – Petroleum industry – Terminology –
1. del: Surovine in proizvodi Part 1: Raw materials and products
1 Namen in področje uporabe 1 Scope
Ta del standarda ISO 1998 vsebuje seznam This part of ISO 1998 consists of a list of
enakovrednih slovenskih in angleških izrazov, equivalent English and French terms, in use in
ki se uporabljajo v naftni industriji za the petroleum industry to indicate raw materials
označevanje surovin ali naftnih proizvodov, or petroleum products, together with the
vključno z ustreznimi definicijami v obeh jezikih. corresponding definitions in the two languages.
Standard ISO 1998 je namenjen potrebam ISO 1998 is intended to cover the purposes of
tistega dela naftne industrije, ki se ukvarja s the part of the petroleum industry dealing with
surovo nafto in naftnimi proizvodi, to pomeni z crude oils and petroleum products, that means all
vsemi s tem povezanimi postopki od področja related operations arising from the production
proizvodnje do končnega uporabnika. Standard field to the final user. It is not intended to cover
ni namenjen za področje opreme v naftni either petroleum equipment, or any operation in
industriji niti za katerikoli postopek na tem the field. However, some pieces of equipment or
področju. Vendar pa so nekateri deli opreme ali some operations of exploration and production
nekateri postopki raziskovanja in pridobivanja are defined. The corresponding terms were
razloženi. Ustrezni izrazi so bili vstavljeni samo v introduced only when they appear in the
primerih, ko se pojavljajo v definiciji proizvoda ali definition of a product or process and when their
procesa in ko je bila njihova definicija potrebna definition was found necessary for understanding
za razumevanje ali da bi se izognili dvoumnosti. or for avoiding any ambiguity. Where a
Terminologija opreme za naftno industrijo spada terminology of petroleum equipment is needed, it
v področje ISO/TC 67 Materiali, oprema in corresponds to the scope of ISO/ TC 67,
morske konstrukcije za industrijo nafte in Materials, eqipment and offshore structures for
zemeljskega plina. petroleum and natural gas industries.
2 Zveza s standardi 2 Normative references
Naslednji standard vsebuje določila, ki s The following standard contains provisions
sklicevanjem v tem besedilu sestavljajo določila which, through references in this text,
constitute provisions of this International
tega mednarodnega standarda. Ob objavi je
bila veljavna označena izdaja. Vsi standardi se Standard. At the time of publication, the edition
indicated was valid. All standards are subject to
revidirajo in strankam, ki sklenejo pogodbo,
zasnovano na tem mednarodnem standardu, revision, and parties to agreements based on
the International Standard are encouraged to
se priporoča, naj preučijo možnost uporabe
najnovejše izdaje spodaj navedenega investigate the possibility of applying the most
recent edition of the standard indicated below.
standarda. Člani IEC in ISO vzdržujejo register
veljavnih mednarodnih standardov. Members of IEC and ISO maintain registers of
currently valid International Standards.
ISO 1998-99: - 2000, Petroleum industry –
ISO 1998-99:2000, Naftna industrija –
Terminologija – 99. del: Splošno in seznam. Terminology – Part 99: General and index.
3 Term numbering
3 Oštevilčenje izrazov
Splošna klasifikacija in sistem oštevilčenja, ki Their general classification and numbering
se uporablja v standardu ISO 1998, je sistem system used in ISO 1998 employs digits
številk, razvrščenih v tri skupine: grouped in three categories:
x.yy.zzz x.yy.zzz
kjer je: where
x številka dela standarda ISO 1998, v x is the part number of ISO 1998, in the
tem primeru 1. del, case Part 1;
yy številka podskupine, v kateri se izraz yy is the subcategory in which the term
pojavlja. appears.
SIST ISO 1998-1 : 2002
1. del ima 12 podskupin: Part 1 has 12 subcategories:
05 surova nafta in surovine za rafinerije 05 crude petroleum and feedstocks for
refineries
15 plinasti proizvodi 15 gaseous products
20 lahki destilati in vmesni proizvodi 20 light distillates and intermediary
products
30 ladijska goriva 30 marine fuels
40 bitumen in sorodni proizvodi 40 bitumen and related products
60 proizvodi srednje viskoznosti, 60 middle viscosity products, lubricants
maziva in sorodni proizvodi and related products
70 težki destilati in ostanki 70 heavy distillates and residues
75 parafini in sorodni proizvodi 75 paraffins and related products
80 trdni in poltrdni proizvodi 80 solid and semi-solid products
90 dodatki (aditivi) 90 additives
95 razno 95 miscellaneous
99 kratice 99 acronyms
zzz serijska številka posameznega izraza zzz is the serial number of the individual
term.
4 Seznam 4 Index
Glej ISO 1998-99. See ISO 1998-99.
5 Zaporedje izrazov 5 Order of listing
Izrazi so navedeni po številčnem zaporedju. Terms are listed in serial number order.
1.05 Surova nafta in surovine za 1.05 Crude petroleum feedstocks for
rafinerije refineries
1.05.000 1.05.000
nafta petroleum
snov, sestavljena ali proizvedena iz mešanice material consisting of, or derived from, a
tekočih ali poltekočih organskih spojin, v mixture of liquid or semi-solid organic
glavnem ogljikovodikov compounds, principally hydrocarbons
1.05.005 1.05.005
surova nafta crude oil
nafta naravnega izvora, ki se nahaja pretežno v naturally occurring form of petroleum, mainly
poroznih podzemnih plasteh, kot so npr. occuring in a porous underground formation
peščenjaki such as sandstone
1.05.010 1.05.010
parafinska surova nafta paraffinic crude
surova nafta, sestavljena pretežno iz parafinskih Crude oil consisting essentially of paraffinic
ogljikovodikov in spojin z aromatskimi in hydrocarbons and aromatic and naphthenic
naftenskimi obroči s stranskimi parafinskimi ring compounds with paraffinic side chains
verigami
OPOMBA: Te vrste nafte lahko pri sobni temperaturi NOTE Such crudes may contain a high
vsebujejo večjo količino trdne, voskaste proportion of solid, waxy material at
snovi. ambient temperature.
SIST ISO 1998-1 : 2002
1.05.020 1.05.020
asfaltna surova nafta asphaltic crude
težka surova nafta, sestavljena pretežno iz heavy crude oil containing a high proportion of
asfaltenov, aromatov in naftenov, katere asphaltenes, aromatics and naphthenes, and
ostanek je primeren za proizvodnjo bitumnov which yields a residue suitable for the
manufacture of bitumens
1.05.030 1.05.030
naftenska surova nafta naphthenic base crude
surova nafta z znatnim deležem naftenov crude oil containing a substantial proportion of
(cikloparafinov) v nekaterih ali vseh naphthenes (cycloparaffins) in some or all of
destilacijskih frakcijah in ostankih the distillation fractions and residues
1.05.040 1.05.040
aromatska surova nafta aromatic crude
surova nafta z večjim deležem aromatskih crude oil with a higher content of aromatic
ogljikovodikov kot običajno hydrocarbons than is generally found
1.05.050 1.05.050
mešana surova nafta, mixed crude
vmesna surova nafta intermediate crude
surova nafta, katere atmosferski destilati crude oil whose atmospheric distillates contain
vsebujejo večji delež aromatskih spojin kot a higher than normal proportion of aromatic
običajno compounds
1.05.060 1.05.060
kisla surova nafta sour crude
surova nafta z znatnim deležem korozivnih crude oil containing a significant amount of
žveplenih spojin corrosive sulfur compounds
1.05.070 1.05.070
nekorozivna surova nafta, non-corrosive crude
sladka surova nafta sweet crude
surova nafta z nizkim deležem hitro hlapljivih crude oil having a low content of volatile sulfur
žveplovih spojin, kot so npr. vodikov sulfid in compounds such as hydrogen sulfide and
merkaptani. mercaptans
1.05.080 1.05.080
reducirana surova nafta reduced crude
proizvod, ki je pridobljen po odstranitvi lahkih product oblained after removal, by atmospheric
komponent surove nafte po atmosferski destilaciji distillation, of the light components of crude oil
1.05.090 1.05.90
atmosferski ostanek surove nafte topped crude
long residue
surova nafta, iz katere so bili z atmosfersko
crude oil which has been freed of gases,
destilacijo odstranjeni plin, bencin, kerozin in gasoline, kerosine and gas oil
plinsko olje
1.05.100 1.05.100
surovina
feedstock
primarna snov, namenjena za predelavo primary material introduced into a plant for
processing
1.05.110 1.05.110
kondenzat zemeljskega plina
natural gas condensate
tekoče frakcije, proizvedene med hladilnimi in liquid fractions produced during cooling and
tlačnimi procesi pri proizvodnji tržnega
pressure operations in the production of
zemeljskega plina marketed natural gas
SIST ISO 1998-1 : 2002
1.05.120 1.05.120
olje iz skrilavca shale oil
mineralno olje, dobljeno s pirolizo oljnega skrilavca mineral oil obtained by the pyrolysis of oil-shale
1.05.122
1.05.122
asfaltni peski, asphaltic sands
bitumenski peski, bituminous sands
oljni peski, oil sands
katranski peski tar sands
peski, impregnirani z bitumnom, ki ga lahko sands impregnated with bitumen which can be
ekstrahiramo s topilom extracted by a solvent
1.05.130 1.05.130
synthetic crude
sintetična surova nafta
tekoči ogljikovodiki, primerni kot surovina liquid hydrocarbons suitable for use as a
feedstock to primary refinery processing units
primarnih rafinacijskih predelovalnih enot, kot
nadomestek za surovo nafto. Lahko vključuje as a substitute for crude oil, which may include,
or be totally compased of, liquids from non-
oziroma je v celoti sestavljena iz tekočin, ki
niso naftnega izvora petroleum origin
1.05.150 1.05.150
onesnažen naftni proizvod (slop) slops
slop
slop oil
naftni proizvodi, ki so onesnaženi al
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.