EN 60745-2-8:2003/A11:2007

SLOVENSKI STANDARD
01-oktober-2007
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DãNDUMHLQVHNDOQLNH
SORþHYLQH
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for
shears and nibblers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-8: Besondere
Anforderungen für Blechscheren und Nibbler
Outils électroportatifs a moteur - Sécurité - Partie 2-8: Regles particulieres pour les
cisailles a métaux et les grignoteuses
Ta slovenski standard je istoveten z: EN 60745-2-8:2003/A11:2007
ICS:
25.120.10 Kovaški stroji. Stiskalnice. Forging equipment. Presses.
Škarje Shears
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60745-2-8/A11
NORME EUROPÉENNE
April 2007
EUROPÄISCHE NORM
ICS 25.140.20; 25.140.30; 25.120.10

English version
Hand-held motor-operated electric tools -
Safety -
Part 2-8: Particular requirements for shears and nibblers

Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-8: Règles particulières Sicherheit -
Teil 2-8: Besondere Anforderungen
pour les cisailles à métaux
et les grignoteuses für Blechscheren und Nibbler

This amendment A11 modifies the European Standard EN 60745-2-8:2003; it was approved by CENELEC on
2006-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-8:2003/A11:2007 E

Foreword
This amendment to the European Standard EN 60745-2-8:2003 was prepared by the Technical Committee
CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
amendment A11 to EN 60745-2-8:2003 on 2006-12-01.
This amendment was prepared to align the Subclause 6.2 with the new Subclause 6.2 in EN 60745-1:2006.
Moreover, vibration values determined with the new 6.2 are complying with the requirements of the Physical
Agents Directive Vibration 2002/44/EC.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-12-01
– latest date by which the national standards conflicting
with
...