Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for shears and nibblers. The rated voltage being not more tha 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-8: Besondere Anforderungen für Blechscheren und Nibbler

Outils électroportatifs à moteur - Sécurité - Partie 2-8: Règles particulières pour les cisailles à métaux et les grignoteuses

Traite de la sécurité des outils dont la tension assignée n'est pas supérieure à 250 V en courant monophasé alternatif ou courant continu et 440 V en courant alternatif triphasé. Complète ou modifie les articles correspondants de la CEI 60745-1.

Električna ročna orodja - Varnost - 2-8. del: Posebne zahteve za škarje in sekalnike pločevine (IEC 60745-2-8:2003; spremenjen)

General Information

Status
Withdrawn
Publication Date
24-Jul-2003
Withdrawal Date
31-Jan-2006
ICS
25.120.10 - Forging equipment. Presses. Shears
 
25.140.20 - Electric tools
 
25.140.30 - Hand-operated tools
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Drafting Committee
IEC/TC 116 - Safety of hand-held motor-operated electric tools
Parallel Committee
IEC/SC 61F - IEC_SC_61F --> TC 116
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-May-2012
Completion Date
01-May-2012
Directive
98/37/EC - Machinery
Ref Project
SIST EN 60745-2-8:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers

Relations

Replaces
EN 50144-2-8:1996 - Safety of hand-held electric motor operated tools - Part 2-8: Particular requirements for sheet metal shears and nibblers
Effective Date
29-Jan-2023
Replaced By
EN 60745-2-8:2009 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
Effective Date
07-Jun-2022
Amended By
EN 60745-2-8:2003/A1:2009 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
Effective Date
29-Jan-2023
Amended By
EN 60745-2-8:2003/A11:2007 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
Effective Date
29-Jan-2023
Revised
EN 60745-2-8:2009 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
Effective Date
08-May-2012

Get Certified

Connect with accredited certification bodies for this standard

National Aerospace and Defense Contractors Accreditation Program (NADCAP)

Global cooperative program for special process quality in aerospace.

ANAB United States Verified
Visit Website

CARES (UK Certification Authority for Reinforcing Steels)

UK certification for reinforcing steels and construction.

UKAS United Kingdom Verified
Visit Website

DVS-ZERT GmbH

German welding certification society.

DAKKS Germany Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 60745-2-8:2003 is a standard published by CLC. Its full title is "Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers". This standard covers: Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for shears and nibblers. The rated voltage being not more tha 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for shears and nibblers. The rated voltage being not more tha 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

EN 60745-2-8:2003 is classified under the following ICS (International Classification for Standards) categories: 25.120.10 - Forging equipment. Presses. Shears; 25.140.20 - Electric tools; 25.140.30 - Hand-operated tools. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 60745-2-8:2003 has the following relationships with other standards: It is inter standard links to EN 50144-2-8:1996, EN 60745-2-8:2009, EN 60745-2-8:2003/A1:2009, EN 60745-2-8:2003/A11:2007, EN 60745-2-8:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 60745-2-8:2003 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 60745-2-8:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2003
1DGRPHãþD
SIST EN 50144-2-8:1999
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DãNDUMHLQVHNDOQLNH
SORþHYLQH ,(&VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for
shears and nibblers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-8: Besondere
Anforderungen für Blechscheren und Nibbler
Outils électroportatifs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...