EN 12814-3:2000
(Main)Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test
This standard specifies the dimensions, the method of sampling and the preparation of the test specimens, and the conditions for performing the tensile creep t est perpendicular to the weld in order to determine the long term tensile welding factor. A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination...)to assess the performance of welded assemblies, made from thermoplastics materials.
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 3: Zeitstand-Zugversuch
Diese Norm legt Maße, Probenahmeverfahren, Probenvorbereitung sowie Durchführungsbedingungen für einen Zeitstand-Zugversuch rechtwinklig zur Schweißnaht fest, bei dem der Langzeitschweißfaktor bestimmt wird. Ein Zeistand-Zugversuch kann zusammen mit anderen Prüfungen (z.B. Biegeversuch, Zugversuch, makrographische Untersuchung,...) angewendet werden, um das Betriebsverhalten von Schweißverbindungen aus thermoplastischen Kunststoffen zu beurteilen.
Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3: Essai de fluage
La présente norme européenne spécifie les dimensions, la méthode d'échantillonnage et la préparation des éprouvettes, ainsi que les conditions d'exécution de l'essai de fluage perpendiculaire à la soudure afin de déterminer le facteur de soudage pour longues durées en traction. Un essai de fluage peut être utilisé en combinaison avec d'autres essais (par exemple : essai de pliage, essai de traction, examen macrographique, etc.) pour évaluer les performances des assemblages soudés en thermoplastiques.
Preskus zvarjenih spojev plastomernih polizdelkov - 3. del: Preskus lezenja pri natezni obremenitvi
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jan-2000
- Withdrawal Date
- 25-Feb-2014
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249/SC 5/WG 2 - Testing of welded joints
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Feb-2014
- Completion Date
- 26-Feb-2014
Relations
- Effective Date
- 04-Apr-2012
- Effective Date
- 08-Jun-2022
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12814-3:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test". This standard covers: This standard specifies the dimensions, the method of sampling and the preparation of the test specimens, and the conditions for performing the tensile creep t est perpendicular to the weld in order to determine the long term tensile welding factor. A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination...)to assess the performance of welded assemblies, made from thermoplastics materials.
This standard specifies the dimensions, the method of sampling and the preparation of the test specimens, and the conditions for performing the tensile creep t est perpendicular to the weld in order to determine the long term tensile welding factor. A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination...)to assess the performance of welded assemblies, made from thermoplastics materials.
EN 12814-3:2000 is classified under the following ICS (International Classification for Standards) categories: 25.160.40 - Welded joints and welds. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12814-3:2000 has the following relationships with other standards: It is inter standard links to EN 12814-3:2014, EN 12814-3:2000/A1:2005; is excused to EN 12814-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12814-3:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskus zvarjenih spojev plastomernih polizdelkov - 3. del: Preskus lezenja pri natezni obremenitviPrüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 3: Zeitstand-ZugversuchEssais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3: Essai de fluageTesting of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...