CEN/TS 16819:2026
(Main)Postal services - Parcel boxes for end use - Technical features
- Abstract
This document describes the technical features of parcel boxes for end use. This covers technical features such as size of parcels, ergonomics and safety, corrosion and water penetration resistance and security of delivery.
- Status
- Published
- Publication Date
- 27-Oct-2026
- Technical Committee
- CEN/TC 320 - Transport - Logistics and services
- Drafting Committee
- CEN/TC 331/WG 5 - Apertures in letter boxes
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 28-Oct-2026
- Due Date
- 03-Feb-2026
- Completion Date
- 28-Oct-2026
CEN/TS 16819:2026 is a CEN Technical Specification for postal services that sets technical features for parcel boxes for end use. It defines how parcel boxes are classified, what sizes they should accept, and what they should meet for ergonomics, safety, corrosion resistance, water penetration resistance, and delivery security. It is written for manufacturers, testers, installers, and buyers who need a common technical basis for specifying and checking parcel boxes.
What does CEN/TS 16819:2026 specify?
CEN/TS 16819:2026 specifies the technical features of parcel boxes for end use. In practice, that means the standard gives a common way to describe parcel box type, size, corrosion resistance, security level, and the tests used to check those features.
The document is organized into a short set of clauses that move from classification to requirements and test methods. Clause 4 covers classification, designation and coding; Clause 5 sets the requirements; Clause 6 gives the test methods. The annexes provide the detailed dimensions, installation guidance, security examples, and an optional ventilation test.
| Annex | What it covers |
|---|---|
| Annex A | Normative parcel dimensions for the identified parcel sizes |
| Annex B | Informative guidance on installation height of the access door |
| Annex C | Informative examples for security force application |
| Annex D | Informative ventilation test |
What are the key requirements of CEN/TS 16819:2026?
CEN/TS 16819:2026 combines classification, construction requirements, and test methods. The practical effect is that a parcel box is not only described by size and type, but also checked for safe use, weather resistance, and resistance to theft.
Classification and identification
Clause 4 identifies four parcel box types, eight parcel sizes, three corrosion resistance grades, and six security grades. The manufacturer shall also state which parcel sizes fit inside the box. This matters because the product marking and user information must match the actual box capacity and resistance level.
Dimensions and parcel fit
Clause 5.3 requires the parcel box to accept the maximum parcel sizes given in Annex A. It also requires the box to allow gauge parcels to pass through the opening door and to be removed without damage. For a buyer or installer, this means the box has to work in real use, not only on paper.
Installation, ergonomics, and safety
Clause 5.4 requires installation instructions to state the installation height of the box and lock, and the box must be installed according to the manufacturer’s fixing instructions. The clause also limits sharp edges in reachable areas and sets child-protection requirements for larger parcel boxes. In practice, this affects where the box can be mounted, how the door is accessed, and whether the design needs emergency opening, ventilation openings, and warning labels.
Corrosion and water penetration
Clause 5.5 requires corrosion resistance in accordance with EN 1670. It also allows water penetration resistance to be checked either by the postal-box test in EN 13724:2013 or by IPX3 in EN 60529. This gives manufacturers a choice of test route, while still giving users a clear weather-resistance target.
Security against theft
Clause 5.6 sets the security requirements for the door, locks, fixings, casing, and other door systems. The standard defines six security grades with increasing force levels, and it requires the construction to resist those forces without creating an opening large enough for the gauge to be pushed in. This is the core anti-theft part of the document and is important for both product design and compliance testing.
Electrical safety, cybersecurity, and electromagnetic compatibility
Clauses 5.7 to 5.9 cover parcel boxes that include information and communication technology equipment. Electrical safety is linked to EN IEC 62368-1, and the document also draws attention to applicable rules for cybersecurity and electromagnetic compatibility. This matters when the parcel box has powered or connected features such as electronic locking or communication functions.
Test methods and marking
Clause 6 gives the test methods that correspond to the requirements in Clause 5, including dimensional checks, corrosion and water penetration tests, and security force tests. It also requires product marking to show the technical specification reference, type, size, corrosion resistance, and security grade. For procurement and quality control, this makes the product easier to identify and compare.
What terms does CEN/TS 16819:2026 define?
CEN/TS 16819:2026 defines the terms needed to describe the box, its parts, and the test logic.
- Parcel box - a receptacle intended to receive parcels delivered by postal and/or parcel operators.
- Parcel box component - a part supplied by the manufacturer of the parcel box.
- Access door - the opening through which a parcel is delivered.
- Casing - the enclosure that receives delivered parcels, excluding the box door.
- Gauge parcel - a parcel used to test whether parcels can be delivered through the opening.
- Lock mechanism - a locking device operated mechanically, electronically, or by other means.
- Delivery floor level - the floor level on the delivery side of the parcel box.
- Receiving floor level - the floor level on the receiving side of the parcel box.
Who uses CEN/TS 16819:2026?
CEN/TS 16819:2026 is used by manufacturers of parcel boxes, because it defines the product classes, marking, and the technical requirements to design against. It is also used by test laboratories and quality teams, because Clause 6 gives the methods for checking dimensions, water resistance, corrosion resistance, and security.
Postal operators, parcel service providers, specifiers, and buyers use it when selecting parcel boxes for installation or procurement. Installers use it because the document requires the box to be mounted according to the manufacturer’s fixing instructions and gives installation-height guidance in Annex B.
What changed in CEN/TS 16819:2026 from the previous edition?
CEN/TS 16819:2026 supersedes CEN/TS 16819:2015. The European foreword states three significant technical changes compared with the previous edition:
- Clause 5.7, Electrical safety, was added.
- Clause 5.8, Cybersecurity, was added.
- Clause 5.9, Electromagnetic compatibility, was added.
Which standards are used with CEN/TS 16819:2026?
CEN/TS 16819:2026 refers to several standards that support its requirements and tests.
- EN 1670 - provides the corrosion resistance requirements and test methods used for parcel box components.
- EN 13724:2013 - supplies the aperture-related requirements and test methods, and is also used for the gauge parcel and water penetration test options.
- EN 60529 - provides the IPX3 water penetration classification used as an alternative test route.
- EN IEC 62368-1 - provides the electrical safety requirements for parcel boxes that include information and communication technology equipment.
What does the CEN/TS 16819:2026 document contain?
CEN/TS 16819:2026 contains classification rules, detailed technical requirements, and test methods for parcel boxes for end use. It includes a normative annex with parcel dimensions, and informative annexes for installation height, security force application, and an optional ventilation test.
The document also includes product-marking content, including an example marking format, so a box can be identified by type, size, corrosion resistance, and security grade. The security clauses are supported by Figure 2 and Annex C, which show how force is applied during testing.
Annex D gives a ventilation test process for the child-protection case where the box is used as a contained space. The bibliography also points to accessibility, graphical symbols, and ventilation-related safety references that may be useful when designing or assessing a parcel box.
Relations
- Effective Date
- 26-Jun-2024
Get Certified
Connect with accredited certification bodies for this standard

Great Wall Tianjin Quality Assurance Center
Established 1993, first batch to receive national accreditation with IAF recognition.
Hong Kong Quality Assurance Agency (HKQAA)
Hong Kong's leading certification body.

Innovative Quality Certifications Pvt. Ltd. (IQCPL)
Known for integrity, providing ethical & impartial Assessment & Certification. CMMI Institute Partner.
Sponsored listings
Frequently Asked Questions
CEN/TS 16819:2026 is a technical specification published by the European Committee for Standardization (CEN). Its full title is "Postal services - Parcel boxes for end use - Technical features". This standard covers: This document describes the technical features of parcel boxes for end use. This covers technical features such as size of parcels, ergonomics and safety, corrosion and water penetration resistance and security of delivery.
This document describes the technical features of parcel boxes for end use. This covers technical features such as size of parcels, ergonomics and safety, corrosion and water penetration resistance and security of delivery.
CEN/TS 16819:2026 is classified under the following ICS (International Classification for Standards) categories: 03.240 - Postal services. The ICS classification helps identify the subject area and facilitates finding related standards.
CEN/TS 16819:2026 has the following relationships with other standards: It is inter standard links to CEN/TS 16819:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
CEN/TS 16819:2026 is associated with the following European legislation: Standardization Mandates: M/428. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
CEN/TS 16819:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2027
Poštne storitve - Škatle za pakete za končno uporabo - Tehnične značilnosti
Postal services - Parcel boxes for end use - Technical features
Postalische Dienstleistungen - Paketboxen für den Endverbrauch - Technische
Merkmale
Services postaux - Boîtes à colis pour utilisation finale - Caractéristiques techniques
Ta slovenski standard je istoveten z: CEN/TS 16819:2026
ICS:
03.240 Poštne storitve Postal services
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN/TS 16819
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
October 2026
TECHNISCHE SPEZIFIKATION
ICS 03.240 Supersedes CEN/TS 16819:2015
English Version
Postal services - Parcel boxes for end use - Technical
features
Services postaux - Boîtes à colis pour utilisation finale - Postalische Dienstleistungen - Paketboxen für den
Caractéristiques techniques Endverbrauch - Technische Merkmale
This Technical Specification (CEN/TS) was approved by CEN on 6 September 2026 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16819:2026 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Classification, designation and coding . 6
4.1 Parcel box types . 6
4.2 Parcel sizes . 6
4.3 Corrosion resistance . 6
4.4 Security . 7
5 Requirements . 7
5.1 General requirements . 7
5.2 Components . 7
5.3 Dimensions. 7
5.3.1 Parcel box dimensions . 7
5.3.2 Gauge parcel . 7
5.4 Ergonomics and safety . 7
5.4.1 Installation height of the box and lock . 7
5.4.2 Safety . 8
5.4.3 Fire protection . 9
5.5 Corrosion and water penetration . 9
5.5.1 General. 9
5.5.2 Water penetration . 9
5.6 Security . 9
5.6.1 Security requirements . 9
5.6.2 Security door and locks . 9
5.6.3 Fixings . 10
5.6.4 Casing strength . 10
5.6.5 Other door systems . 10
5.7 Electrical safety . 10
5.8 Cybersecurity . 10
5.9 Electromagnetic compatibility . 10
6 Test methods . 11
6.1 General test requirements . 11
6.2 Components . 11
6.3 Dimensions. 11
6.4 Ergonomics and safety . 11
6.4.1 Installation height of the parcel box and lock . 11
6.4.2 Safety . 11
6.5 Corrosion and water penetration . 11
6.5.1 Corrosion . 11
6.5.2 Water penetration . 11
6.6 Security . 11
6.6.1 Security of door and locks . 11
6.6.2 Fixings . 13
6.6.3 Casing strength . 13
6.6.4 Other door systems . 13
6.6.5 Marking, labelling and packaging . 13
Annex A (normative) Dimensions . 15
Annex B (informative) Installation height of access door . 16
Annex C (informative) Security . 17
Annex D (informative) Ventilation test. 19
Bibliography . 20
European foreword
This document (CEN/TS 16819:2026) has been prepared by Technical Committee CEN/TC 331 “Postal
services”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 16819:2015.
This document includes the following significant technical changes with respect to CEN/TS 16819:2015:
— 5.7 “Electrical safety” has been added;
— 5.8 “Cybersecurity” has been added;
— 5.9 “Electromagnetic compatibility” has been added.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document describes the technical features of parcel boxes for end use. This covers technical features
such as size of parcels, ergonomics and safety, corrosion and water penetration resistance and security
of delivery.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1670, Building hardware — Corrosion resistance — Requirements and test methods
EN 13724:2013, Postal services — Apertures of private letter boxes and letter plates — Requirements and
test methods
EN 60529, Degrees of protection provided by enclosures (IP Code)
EN IEC 62368-1, Audio/video, information and communication technology equipment — Part 1: Safety
requirements (IEC 62368-1)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 13724:2013 and the following
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
parcel box
receptacle intended to receive parcel delivered by postal and/or parcel operators
3.2
parcel box component
part supplied by the manufacturer of the parcel boxes
3.3
access door
opening through which a parcel is delivered
3.4
casing
enclosure receiving the parcels delivered excluding the box door
3.5
door
generally flat device, whose purpose is to cover and/or seal an opening
Note 1 to entry: Doors can open inwards or outwards.
3.6
parcel
packed item with name and address of the recipient to be delivered by a postal and/or parcel operator
3.7
parcel reception area
complete area inside a parcel box where a parcel of the size XS can be placed
3.8
gauge parcel
parcel used to test the clear delivery of parcels
3.9
lock mechanism
locking device which is operated mechanically, electronically or by other means
3.10
delivery floor level
floor level on the delivery side of the parcel box
3.11
receiving floor level
floor level on the receiving side of the parcel box
3.12
theft prevention
protection against the theft of parcels
4 Classification, designation and coding
4.1 Parcel box types
— Parcel box, dedicated to one receiver – limited to one delivery at the same time.
— Parcel box, dedicated to one receiver –not limited to one delivery at the same time.
— Parcel box, shared by several receivers – limited to one delivery at the same time.
— Parcel box, shared by several receivers – not limited to one delivery at the same time.
4.2 Parcel sizes
Eight parcel sizes are identified. The dimensions correspond to the maximum parcel sizes. Dimensions
are given in Annex A.
The manufacturer shall supply information with the box which parcel sizes fit inside the box.
4.3 Corrosion resistance
Three grades of corrosion are identified according to EN 1670:
— Corrosion grade 0;
— Corrosion grade 3;
— Corrosion grade 4.
4.4 Security
Six grades of security are identified (see 5.6.2):
— Security grade 1;
— Security grade 2;
— Security grade 3;
— Security grade 4;
— Security grade 5;
— Security grade 6.
5 Requirements
5.1 General requirements
The test methods that shall be used to meet these requirements are described in Clause 6.
All items shall be installed in accordance with the manufacturer's fixing instructions as supplied with the
product.
5.2 Components
Fixing instructions shall be supplied with each individual product enabling the correct installation in
accordance with this document.
5.3 Dimensions
5.3.1 Parcel box dimensions
The parcel box shall allow parcels of the maximum sizes described in Annex A to fit inside the box.
Eight parcel sizes are identified. Maximum dimensions of each parcel are given in Annex A.
5.3.2 Gauge parcel
It shall be possible to push gauge parcels through the opening door without damaging it. It shall be
possibl
...



