EN 13587:2010
(Main)Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
This European Standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of a polymer modified bitumen, by means of a tensile test.
NOTE The tensile properties, more particularly the tensile stress, the elongation and energy, at the yield point and on fracture, are customarily used as a criterion for assessing the quality of these materials.
WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln mit dem Zugprüfverfahren
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln,
besonders solcher von polymermodifiziertem Bitumen, mit einer Zugprüfung fest.
ANMERKUNG Die Streckeigenschaften, insbesondere die Zugspannung, die Dehnung und die Energie an der
Streckgrenze und beim Bruch, werden üblicherweise als ein Kriterium für die Qualität dieser Materialen verwendet.
WARNUNG — Die Anwendung dieser Europäischen Norm kann den Umgang mit gefährlichen Substanzen
und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese
Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme
anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete
Verhaltensregeln zur Sicherheit und Gesundheit festzulegen und vor der Anwendung zu klären,
ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de traction
La présente Norme européenne prescrit une méthode permettant déterminer les caractéristiques de traction
des liants bitumineux, en particulier celles de bitumes modifiés par des polymères, au moyen d’un essai de
traction.
NOTE Les caractéristiques de traction, et plus particulièrement la contrainte de traction, l’allongement et l’énergie, au
seuil d’écoulement et à la rupture, sont habituellement utilisées comme critères pour évaluer la qualité de ces matériaux.
AVERTISSEMENT — L'utilisation de la présente Norme européenne implique l'intervention de produits,
d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas
censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de
l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer
l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje nateznih lastnosti bitumenskih veziv z natezno preskusno metodo
Ta evropski standard določa metodo za določevanje nateznih lastnosti bitumenskih veziv, še posebej bitumena spremenjenega z polimeri, z natezno preskusno metodo.
General Information
- Status
- Withdrawn
- Publication Date
- 25-May-2010
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 1 - Bituminous binders for paving
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-Nov-2016
- Completion Date
- 28-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-May-2010
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 30-Nov-2016
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Kiwa BDA Testing
Building and construction product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13587:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method". This standard covers: This European Standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of a polymer modified bitumen, by means of a tensile test. NOTE The tensile properties, more particularly the tensile stress, the elongation and energy, at the yield point and on fracture, are customarily used as a criterion for assessing the quality of these materials. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of a polymer modified bitumen, by means of a tensile test. NOTE The tensile properties, more particularly the tensile stress, the elongation and energy, at the yield point and on fracture, are customarily used as a criterion for assessing the quality of these materials. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 13587:2010 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13587:2010 has the following relationships with other standards: It is inter standard links to EN 13587:2003, EN 58:2012, EN 1307:2014, EN ISO 527-4:2023, EN 12594:2024, EN ISO 527-5:2021, EN ISO 527-1:2019, EN ISO 527-2:2025, EN ISO 527-3:2018, EN 13589:2018, EN 13587:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13587:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13587:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln mit dem ZugprüfverfahrenBitumes et liants bitumineux
- Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de tractionBitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13587:2010SIST EN 13587:2010en,de01-oktober-2010SIST EN 13587:2010SLOVENSKI
STANDARDSIST EN 13587:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13587
May 2010 ICS 75.140; 91.100.50 Supersedes EN 13587:2003English Version
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de traction
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln mit dem Zugprüfverfahren This European Standard was approved by CEN on 23 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13587:2010: ESIST EN 13587:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...