ASTM D8467-22
(Test Method)Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil
Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil
SIGNIFICANCE AND USE
4.1 This test method can be used for quantitative determination of residue in emulsified asphalts.
Note 1: The quality of results produced by this standard is dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guidance provide a means of evaluating and controlling some of those factors.
SCOPE
1.1 This test method covers a quick and quantitative determination of residue in emulsified asphalts giving comparable results to Test Methods D6934, D6997, and D7404.
1.2 Since a precision estimate for this standard has not been developed, the test method is to be used for research and informational purposes only. Therefore, this standard should not be used for acceptance or rejection of a material for purchasing purposes.
1.3 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.
1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
- Status
- Published
- Publication Date
- 14-Jun-2022
- Technical Committee
- D04 - Road and Paving Materials
- Drafting Committee
- D04.42 - Emulsified Asphalt Test
Relations
- Effective Date
- 01-Nov-2019
- Effective Date
- 01-Oct-2016
- Effective Date
- 01-Jan-2016
- Effective Date
- 01-Dec-2013
- Effective Date
- 01-Jun-2012
- Effective Date
- 01-Dec-2011
- Effective Date
- 01-Dec-2009
- Effective Date
- 01-Jul-2008
- Effective Date
- 01-Dec-2007
- Effective Date
- 01-Aug-2007
- Effective Date
- 01-Aug-2007
- Effective Date
- 15-Jan-2007
- Effective Date
- 15-Jan-2007
- Effective Date
- 15-Jan-2007
- Effective Date
- 01-Jun-2006
Overview
ASTM D8467-22: Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil provides a rapid and quantitative procedure for measuring the residue content in emulsified asphalts. Developed by ASTM International, this method delivers results comparable to existing ASTM standards such as D6934, D6997, and D7404. The test involves evaporating water from a known mass of emulsified asphalt by heating, followed by weighing the residue to calculate the percentage of asphalt by mass. This standard is primarily intended for research and informational uses in the construction and road materials industry.
Key Topics
- Emulsified Asphalt Residue: The main focus of ASTM D8467-22 is the quick determination of the solid asphalt residue remaining after evaporating the water content from a sample of emulsified asphalt.
- Quick Boil Method: Utilizes heat to rapidly separate water from asphalt, streamlining laboratory analysis.
- Comparable Results: Provides results consistent with established test methods like ASTM D6934, D6997, and D7404.
- Research and Informational Use Only: As a precision estimate has not been established, this method should not be used as the sole basis for material acceptance or purchasing decisions.
- Lab Best Practices: Emphasizes the role of properly maintained and calibrated equipment and competent personnel, referencing ASTM D3666 for agency qualification.
- Safety and Compliance: Reminds users to address all relevant safety, health, and environmental concerns before conducting the test.
Applications
The quick boil test for emulsified asphalt residue is valuable for professionals involved in road construction, pavement maintenance, and quality control of asphalt products. Practical applications include:
- Research and Development: Ideal for laboratories and engineers developing new asphalt mixes and evaluating formulations.
- Quality Control: Enables quick checks of asphalt emulsion properties during storage, transport, or production to ensure consistency.
- Educational Settings: Serves as a demonstrative or teaching tool in academic settings for training future materials technicians.
- Kaizen and Process Improvement: Supports continuous improvement initiatives in emulsion manufacturing by providing rapid feedback on product characteristics.
Note: This test method is not intended for acceptance or rejection of materials for purchasing, as precision estimates have not been developed. Reliable results depend on following proper equipment calibration, standard operating procedures, and adherence to safety protocols. Only SI units are used in the scope of this standard.
Related Standards
- ASTM D6934 - Standard Test Method for Residue by Evaporation of Emulsified Asphalt
- ASTM D6997 - Test Method for Distillation of Emulsified Asphalt
- ASTM D7404 - Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer
- ASTM D3666 - Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
These related ASTM standards provide additional procedures for evaluating emulsified asphalt residue and outline minimum requirements for laboratory competency and equipment.
By following ASTM D8467-22, laboratories and researchers can efficiently determine the residue content in emulsified asphalts, supporting advancements in pavement technology and the construction industry. Incorporating this standard promotes methodological consistency, delivers reliable research data, and aligns with internationally recognized best practices in asphalt testing.
Get Certified
Connect with accredited certification bodies for this standard
Zavod za gradbeništvo Slovenije (ZAG) - Inšpekcija
ZAG inspection body for construction products, structures, and materials.
Sponsored listings
Frequently Asked Questions
ASTM D8467-22 is a standard published by ASTM International. Its full title is "Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil". This standard covers: SIGNIFICANCE AND USE 4.1 This test method can be used for quantitative determination of residue in emulsified asphalts. Note 1: The quality of results produced by this standard is dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guidance provide a means of evaluating and controlling some of those factors. SCOPE 1.1 This test method covers a quick and quantitative determination of residue in emulsified asphalts giving comparable results to Test Methods D6934, D6997, and D7404. 1.2 Since a precision estimate for this standard has not been developed, the test method is to be used for research and informational purposes only. Therefore, this standard should not be used for acceptance or rejection of a material for purchasing purposes. 1.3 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
SIGNIFICANCE AND USE 4.1 This test method can be used for quantitative determination of residue in emulsified asphalts. Note 1: The quality of results produced by this standard is dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guidance provide a means of evaluating and controlling some of those factors. SCOPE 1.1 This test method covers a quick and quantitative determination of residue in emulsified asphalts giving comparable results to Test Methods D6934, D6997, and D7404. 1.2 Since a precision estimate for this standard has not been developed, the test method is to be used for research and informational purposes only. Therefore, this standard should not be used for acceptance or rejection of a material for purchasing purposes. 1.3 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D8467-22 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
ASTM D8467-22 has the following relationships with other standards: It is inter standard links to ASTM D7404-19, ASTM D3666-16, ASTM D7404-07(2016), ASTM D3666-13, ASTM D7404-07(2012), ASTM D3666-11, ASTM D3666-09a, ASTM D6934-08, ASTM D7404-07, ASTM D3666-07ae1, ASTM D3666-07a, ASTM D3666-07e1, ASTM D3666-07, ASTM D3666-07e2, ASTM D3666-06. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ASTM D8467-22 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:D8467 −22
Standard Test Method for
Determination of Emulsified Asphalt Residue By Quick Boil
This standard is issued under the fixed designation D8467; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D6997 Test Method for Distillation of Emulsified Asphalt
D7404 TestMethodforDeterminationofEmulsifiedAsphalt
1.1 This test method covers a quick and quantitative deter-
Residue by Moisture Balance Analyzer
mination of residue in emulsified asphalts giving comparable
results to Test Methods D6934, D6997, and D7404.
3. Summary of Test Method
1.2 Since a precision estimate for this standard has not been
3.1 A known mass of emulsified asphalt is heated to
developed, the test method is to be used for research and
evaporate water present, then re-weighed to determine the
informational purposes only. Therefore, this standard should
percentage of asphalt residue by mass percent.
not be used for acceptance or rejection of a material for
purchasing purposes.
4. Significance and Use
1.3 The values stated in SI units are to be regarded as the
4.1 This test method can be used for quantitative determi-
standard. No other units of measurement are included in this
nation of residue in emulsified asphalts.
standard.
NOTE 1—The quality of results produced by this standard is dependent
1.4 The text of this standard references notes and footnotes
on the competence of the personnel performing the procedure and the
which provide explanatory material. These notes and footnotes
capability, calibration, and maintenance of the equipment used. Agencies
(excluding those in tables and figures) shall not be considered
that meet the criteria of Specification D3666 are generally considered
as requirements of the standard.
capable of competent and objective testing, sampling, inspection, etc.
Users of this standard are cautioned that compliance with Specification
1.5 This standard does not purport to address all of the
D3666 alone does not completely ensure reliable results. Reliable results
safety concerns, if any, associated with its use. It is the
dependonmanyfactors;followingthesuggestionsofSpecificationD3666
responsibility of the user of this standard to establish appro-
or some similar acceptable guidance provide a means of evaluating and
controlling some of those factors.
priate safety, health, and environmental practices and deter-
mine the applicability of regulatory limitations prior to use.
5. Apparatus
1.6 This international standard was developed in accor-
dance with internationally recognized principles on standard-
5.1 Metal container or other suitable container with a
ization established in the Decision on Principles for the
minimum capacity of 300 mL.
Development of International Standards, Guides and Recom-
5.2 Balance, capable of weighing the metal container and
mendations issued by the World Trade Organization Technical
emulsified asphalt to within 0.1 g.
Barriers to Trade (TBT) Committee.
5.3 Hot plate.
2. Referenced Documents
5.4 Oven (optional), capable of maintaining a temperature
2.1 ASTM Standards:
of approximately 135 to 163 °C.
D3666 Specification for Minimum Requirements for Agen-
5.5 Tongs or similar tool.
cies Testing and Inspecting Road and Paving Materials
5.6 Screen (optional), to prevent splatter.
D6934 Test Method for Residue by Evaporation of Emulsi-
fied Asphalt
6. Conditioning
6.1 All emulsified asphalts shall be properly stirred to
This test method is under the jurisdiction of ASTM Committee D04 on Road
and Paving Materials and is the direct responsibility of Subcommittee D04.42 on
achieve homogeneity before testing.
Emulsified Asphalt Test.
6.2 All emulsified asphalts with viscosity testing require-
Current edition approved June 15, 2022. Published June 2022. DOI: 10.1520/
D8467-22.
ments of 50 °C shall be heated to 50 6 3 °C in the original
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...