ASTM D4360-11(2019)

ASTM D4360-11(2019) is a technical specification published by ASTM International. Its full title is "Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone". This standard covers: ABSTRACT This certification of coating conformance form provides procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order. The certification form is divided into four headings: General Type and Description(I), Buyer Information(II), Seller Information (III), and Certification (IV). The first heading consists of the following information: generic type, manufacturer's designation, specification number, formula number, component number, component identification, and color. The second heading consists purchase order number, release number, part number, item number, and stock number. The third heading consists of seller's representative, batch number, lot number, date of manufacture, and date of certification expiration. The last heading is a paragraph describing the certification. SCOPE 1.1 This specification covers methyl n-amyl ketone (98 % grade) for use in paint, varnish, lacquer, and related products. 1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification. 1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ABSTRACT This certification of coating conformance form provides procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order. The certification form is divided into four headings: General Type and Description(I), Buyer Information(II), Seller Information (III), and Certification (IV). The first heading consists of the following information: generic type, manufacturer's designation, specification number, formula number, component number, component identification, and color. The second heading consists purchase order number, release number, part number, item number, and stock number. The third heading consists of seller's representative, batch number, lot number, date of manufacture, and date of certification expiration. The last heading is a paragraph describing the certification. SCOPE 1.1 This specification covers methyl n-amyl ketone (98 % grade) for use in paint, varnish, lacquer, and related products. 1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification. 1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D4360-11(2019) is classified under the following ICS (International Classification for Standards) categories: 71.080.80 - Aldehydes and ketones. The ICS classification helps identify the subject area and facilitates finding related standards.

ASTM D4360-11(2019) has the following relationships with other standards: It is inter standard links to ASTM D4360-11, ASTM D1613-06(2012), ASTM D1078-11, ASTM D5386-10, ASTM D3893-03(2009), ASTM E29-08, ASTM D1364-02(2007), ASTM D268-01(2007), ASTM E29-06b, ASTM E29-06a, ASTM E29-06, ASTM D1613-06, ASTM D5386-05, ASTM D1078-05, ASTM D1209-05. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ASTM D4360-11(2019) is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.