97.220 - Sports equipment and facilities
ICS 97.220 Details
Sports equipment and facilities
Sportgerate. Sportanlagen
Equipements et installations de sports
Športna oprema in pripomočki
General Information
Frequently Asked Questions
ICS 97.220 is a classification code in the International Classification for Standards (ICS) system. It covers "Sports equipment and facilities". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 2288 standards classified under ICS 97.220 (Sports equipment and facilities). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 97.220 - Sports equipment and facilities
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies requirements for the design and construction of climated rooms and any associated equipment for public use.
This document does not apply to electrotechnical aspects of climated rooms.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies the minimum requirements for the provision of physical exercise by fitness clubs.
This includes the operational, managerial, and supervision requirements in the delivery of both within and any externally related services offered by fitness clubs, together with the selection and positioning of exercise equipment, the essential skills required by fitness trainers, and any associated environmental and procedural requirements for safe physical exercising to take place.
This document is applicable to all publicly accessible fitness clubs where exercising in groups or individually takes place and is irrespective of the size of the club. It is intended to provide a healthy, safe and secure environment for its users, including through the use of digital technologies.
This document is applicable to fitness clubs publicly available and open to user subscription or pay-as-you-go services. This document does not cover clubs that are exclusively secondary businesses and offered in addition or as a complement to their primary service.
NOTE In the event that the fitness club is expected to be accessible to people with special needs (e.g. people with a disability and/or impairments, minors, etc.), attention is drawn to any relevant national guidelines.
- Draft51 pagesEnglish languagee-Library read for1 day
This document is applicable to free access unsupervised multi-sports equipment and combinations intended for permanent installation, primarily used for training, recreational and educational use outdoors.
This document specifies requirements for free access unsupervised multi-sports equipment which can incorporate a multi-sports surround, ball stop screen and various equipment for sports such as badminton, basketball, football, futsal, handball, hockey, tennis, and volleyball.
This document specifies requirements, including safety, for the equipment itself as well as for its installation, operation, inspection, and maintenance. This document is applicable to multi-sports equipment intended for individual and collective public use primarily by children and teenagers.
This document is not applicable to equipment as defined in the following standards:
— Playground equipment and surfacing EN 1176 series,
— Skateparks EN 14974,
— Artificial climbing structures EN 12572 series,
— Basketball equipment EN 1270,
— Volleyball equipment EN 1271,
— Football goals EN 748,
— Handball goals EN 749,
— Hockey goals EN 750,
— Table tennis EN 14468-1 and EN 14468-2,
— Tennis equipment EN 1510,
— Badminton equipment EN 1509,
— Portable and permanent socketed goals EN 16579,
— Lightweight goals EN 16664,
— Parkour equipment EN 16899 and
— Permanently installed outdoor fitness equipment EN 16630.
This document does not deal with beach equipment, the ground surfaces, the local environment, and any feature outside the multi-sports equipment. This document does not include any specific requirements other than for access and egress for disabled users.
- Draft58 pagesEnglish languagee-Library read for1 day
This document specifies requirements for the design and construction of climated rooms and any associated equipment for public use.
This document does not apply to electrotechnical aspects of climated rooms.
- Standard16 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for protective helmets for ski mountaineers intended to protect the head of the user in order to reduce the risk of impact injury.
This document is also applicable to protective helmets used in activities with similar hazards including but not limited to; ski-touring, speed-touring, ski fitness, split-boarding, skimo, telemark touring, but does not apply to protective helmets for alpine skiers and snowboarders.
- Standard31 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for protective helmets for use in mountaineering intended to protect the head of the user in order to reduce the risk of impact injury.
This document is also applicable to protective helmets used in activities with similar hazards as in mountaineering, including, but not limited to, climbing, caving, canyoning, rope courses and via ferrata climbing.
This document does not apply to protective helmets used by ski mountaineers as defined in EN 18100:2025.
- Standard29 pagesEnglish languagee-Library read for1 day
This document:
a) specifies minimum performance and durability requirements for performance infill materials used in synthetic turf, and textile sports surfaces;
b) describes how the performance of an infill shall be measured, and the results classified;
c) specifies the physical and chemical properties of an infill that are to be declared in a manufacturer’s product declaration;
d) specifies minimum production control tolerance to ensure consistency of infill materials between production batches;
e) describes how reclaimed infill is to be tested to assess its suitability for use.
NOTE If requested, the procedures described in this document can also be used to assess materials intended to be used as stabilizing infills, although not all of the characteristics described in this document are required for stabilizing infills.
- Standard52 pagesEnglish languagee-Library read for1 day
This document specifies requirements and test methods for protective helmets for ski mountaineers intended to protect the head of the user in order to reduce the risk of impact injury.
This document is also applicable to protective helmets used in activities with similar hazards including but not limited to; ski-touring, speed-touring, ski fitness, split-boarding, skimo, telemark touring, but does not apply to protective helmets for alpine skiers and snowboarders.
- Standard31 pagesEnglish languagee-Library read for1 day
This document specifies computational methods for determining the acoustical source level of projectile sound and its one-third octave band spectrum, expressed as the sound exposure level for nominal mid-band frequencies from 12,5 Hz to 10 kHz. It also specifies a method on how to use this source level to calculate the sound exposure level at a receiver position.
Results obtained with this document can be used as a basis for assessment of projectile sound from shooting ranges. Additionally, the data can be used to determine sound emission or immission from different types of ammunition and weapons. The prediction methods are applicable to outdoor conditions and straight projectile trajectories. Two computational methods are given to determine the acoustical source level: one for streamlined projectile shapes and one for non-streamlined shapes, such as pellets.
- Standard49 pagesEnglish languagee-Library read for1 day
This document:
a) specifies minimum performance and durability requirements for performance infill materials used in synthetic turf, and textile sports surfaces;
b) describes how the performance of an infill shall be measured, and the results classified;
c) specifies the physical and chemical properties of an infill that are to be declared in a manufacturer’s product declaration;
d) specifies minimum production control tolerance to ensure consistency of infill materials between production batches;
e) describes how reclaimed infill is to be tested to assess its suitability for use.
NOTE If requested, the procedures described in this document can also be used to assess materials intended to be used as stabilizing infills, although not all of the characteristics described in this document are required for stabilizing infills.
- Standard52 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements and test methods for all types of load sharing devices commonly used in mountaineering (climbing and associated activities).
This document does not cover the specific requirements of devices intended for use in slackline applications.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a computational method (in line with ISO 17201-4) for estimating the acoustic source data of muzzle blast and explosions on the basis of non-acoustic data for firearms with calibres less than 20 mm and explosions less than 50 g TNT equivalent.
This document addresses those cases where no source measurements exist. This document can also be used as an interpolation method between measurements of muzzle blast.
Source data are given in terms of spectral angular source energy covering the frequency range from 12,5 Hz to 10 kHz and can be used as data input for sound propagation calculation.
This document does not apply to the prediction of sound levels for the assessment of hearing damage; nor can it be used to predict sound pressure levels or sound exposure levels at distances where linear acoustics do not apply.
- Standard29 pagesEnglish languagee-Library read for1 day
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off
This document specifies computational methods for determining the acoustical source level of projectile sound and its one-third octave band spectrum, expressed as the sound exposure level for nominal mid-band frequencies from 12,5 Hz to 10 kHz. It also specifies a method on how to use this source level to calculate the sound exposure level at a receiver position.
Results obtained with this document can be used as a basis for assessment of projectile sound from shooting ranges. Additionally, the data can be used to determine sound emission or immission from different types of ammunition and weapons. The prediction methods are applicable to outdoor conditions and straight projectile trajectories. Two computational methods are given to determine the acoustical source level: one for streamlined projectile shapes and one for non-streamlined shapes, such as pellets.
- Standard49 pagesEnglish languagee-Library read for1 day
This document specifies a computational method (in line with ISO 17201-4) for estimating the acoustic source data of muzzle blast and explosions on the basis of non-acoustic data for firearms with calibres less than 20 mm and explosions less than 50 g TNT equivalent.
This document addresses those cases where no source measurements exist. This document can also be used as an interpolation method between measurements of muzzle blast.
Source data are given in terms of spectral angular source energy covering the frequency range from 12,5 Hz to 10 kHz and can be used as data input for sound propagation calculation.
This document does not apply to the prediction of sound levels for the assessment of hearing damage; nor can it be used to predict sound pressure levels or sound exposure levels at distances where linear acoustics do not apply.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies computational methods for determining the acoustical source level of projectile sound and its one-third octave band spectrum, expressed as the sound exposure level for nominal mid-band frequencies from 12,5 Hz to 10 kHz. It also specifies a method on how to use this source level to calculate the sound exposure level at a receiver position. Results obtained with this document can be used as a basis for assessment of projectile sound from shooting ranges. Additionally, the data can be used to determine sound emission or immission from different types of ammunition and weapons. The prediction methods are applicable to outdoor conditions and straight projectile trajectories. Two computational methods are given to determine the acoustical source level: one for streamlined projectile shapes and one for non-streamlined shapes, such as pellets.
- Standard41 pagesEnglish languagesale 15% off
- Standard43 pagesFrench languagesale 15% off
This document specifies safety requirements and test methods for all types of load sharing devices commonly used in mountaineering (climbing and associated activities).
This document does not cover the specific requirements of devices intended for use in slackline applications.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a computational method (in line with ISO 17201-4) for estimating the acoustic source data of muzzle blast and explosions on the basis of non-acoustic data for firearms with calibres less than 20 mm and explosions less than 50 g TNT equivalent. This document addresses those cases where no source measurements exist. This document can also be used as an interpolation method between measurements of muzzle blast. Source data are given in terms of spectral angular source energy covering the frequency range from 12,5 Hz to 10 kHz and can be used as data input for sound propagation calculation. This document does not apply to the prediction of sound levels for the assessment of hearing damage; nor can it be used to predict sound pressure levels or sound exposure levels at distances where linear acoustics do not apply.
- Standard21 pagesEnglish languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
This document specifies safety requirements and test methods for inlets and outlets for water/air and water-/air-based leisure features involving water movement, in addition to the general safety requirements of EN 13451 1.
The requirements of this specific standard take priority over those in EN 13451 1.
This part of EN 13451 is applicable to swimming pool equipment installed in pools for public use designed for:
- the introduction and/or extraction of water for treatment or leisure purposes;
- the introduction of air for leisure purposes;
- water leisure features involving the movement of water.
NOTE The above items are identified with the general term devices.
- Standard30 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements for starting platforms with a height ≤ 750 mm above water level. These requirements are additional to those given in EN 13451-1 and these documents are intended to be read together.
The requirements of this specific standard take priority over those in EN 13451-1.
This document is applicable to starting platforms for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements for starting platforms with a height ≤ 750 mm above water level. These requirements are additional to those given in EN 13451-1 and these documents are intended to be read together.
The requirements of this specific standard take priority over those in EN 13451-1.
This document is applicable to starting platforms for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements and test methods for inlets and outlets for water/air and water-/air-based leisure features involving water movement, in addition to the general safety requirements of EN 13451 1.
The requirements of this specific standard take priority over those in EN 13451 1.
This part of EN 13451 is applicable to swimming pool equipment installed in pools for public use designed for:
- the introduction and/or extraction of water for treatment or leisure purposes;
- the introduction of air for leisure purposes;
- water leisure features involving the movement of water.
NOTE The above items are identified with the general term devices.
- Standard30 pagesEnglish languagee-Library read for1 day
This document specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.
- Standard5 pagesEnglish languagee-Library read for1 day
This document specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.
- Standard5 pagesEnglish languagee-Library read for1 day
This document defines terms for the specification of important characteristics of alpine skis, cross-country skis (XC-skis) and snowboards.
- Standard25 pagesEnglish languagesale 15% off
- Standard25 pagesFrench languagesale 15% off
This document specifies requirements, test methods and marking for alpine ski-boots with improved walking soles that are used with systems of alpine ski-bindings for improved walking soles with attachment at the boot front and boot rear, the proper release function of which depends on the dimensions and design of the interfaces. Alpine ski boots with improved walking soles are intended to a better walkability without affecting the function of the alpine ski binding designed for improved walking soles. This document is applicable to ski-boots of sizes 15,0 and larger [Types A (Adults) and C (Children)] in the Mondopoint system (see Annex A).
- Standard41 pagesEnglish languagesale 15% off
- Standard42 pagesFrench languagesale 15% off
This document specifies performance requirements and test methods for head protectors for use in ice hockey.
This document is applicable to head protectors worn by ice hockey players excluding goalkeepers and by referees.
- Standard30 pagesEnglish languagee-Library read for1 day
This document specifies performance requirements and test methods for eye and face protectors for use in ice hockey only.
This document is applicable to eye and face protectors worn by ice hockey players other than goalkeepers and by referees.
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies general requirements and test methods for head, face, eye, neck, and body protectors (hereafter referred to as protectors) for use in ice hockey.
This document is intended only for protectors used for ice hockey.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies performance requirements and test methods for head and face protectors for use by ice hockey goalkeepers only.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies consumer information for classified floating leisure articles for use on and in water according to ISO 25649-1:2024.
- Standard32 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class B floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class B floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed.
NOTE 1 Typical products in Class B (see Annex B):
— floating rafts with interior body holding system (“swim seats”) mostly in circular or square shape, fantasy shape for playing purposes;
— floating fantasy shaped structures with one or more openings to host a child’s body, with or without body holding system;
— floating with slits or openings to put legs through any shape;
— floating rings with interior seat segments inside the circular body opening.
NOTE 2 Typical places for application:
— pools;
— protected areas of lakes, ponds;
— protected areas of sea shore (no offshore winds, no currents).
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class A floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class A floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1 Typical products in Class A (see Figures A.1 to A.3):
— “Floating Islands” in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure;
— large floats/rafts in various shapes, from round to square;
— large floating tubes, giant tubes (inflatable or inherently buoyant);
— floating arm chairs, seats and sun beds;
— air mattresses for use on the water;
— recreational rafts/floating platforms/pontoons.
NOTE 2 Typical places for application:
— pools;
— protected areas of lakes, ponds;
— protected area sea shore (no offshore winds, no currents).
- Standard27 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class E floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class E floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class E devices are inflatable boats of a buoyancy of less than 1 800 N with a hull length of more than 1,2 m and less than 2,5 m.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.
NOTE 1 Typical products forming Class E (see Annex F):
— inflatable boats for rowing or paddling of near oval shape with or without transom;
— canoes and kayaks;
— inflatable boats made from plastic sheets or from reinforced materials;
— motor kit/sail kit as additional option.
NOTE 2 Typical applications of Class E devices:
— moving from one place to another for pleasure purposes;
— staying on the water for relaxing;
— moving from shore to the main boat, transportation of persons and load (tender boat).
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies general safety requirements and test methods for indoor stationary training equipment. Other parts of the ISO 20957 series can modify the requirements contained in this document. This document also covers environmental aspects.
It also specifies a classification system (see Clause 4).
This document is applicable to all stationary training equipment. This includes equipment for use in training areas of organizations such as sport associations, educational establishments, hotels, sport halls, clubs, rehabilitation centres and studios (classes S and I) where access and control is specifically regulated by the owner (person who has the legal responsibility), equipment for domestic use (class H) and other types of equipment including motor driven equipment as defined in 3.1.
The requirements of other parts of the ISO 20957 series take priority over the corresponding requirements of this general standard.
This document does not apply to stationary training equipment intended for outdoor use. It also does not apply to stationary training equipment intended for use by children under the age of 14 years, unless such stationary training equipment is intended for educational purposes in schools and other pedagogical contexts for children under the supervision of a qualified adult instructor.
- Standard30 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class C floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class C floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1 Typical products forming Class C (see Annex B):
— tube riders towable with interior holding facility and closed cockpit;
— raft riders towable;
— board riders towable;
— banana type towable.
NOTE 2 Typical places for application:
— distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours);
— no to little waves;
— no strong currents.
- Standard41 pagesEnglish languagee-Library read for1 day
This document specifies general safety requirements and test methods related to materials, safety and performance for classified floating leisure articles for use on and in water.
This document is not applicable to:
— aquatic toys (use in shallow waters/use under supervision);
— inflatable boats with a buoyancy > 1 800 N;
— buoyant aids for swimming instructions;
— air mattresses that are not specifically designed or intended for use on the water (e.g. velour bed, self-inflating mattress and rubberized cotton air mattress);
— floating seats for angling purposes;
— surf sports type devices (e.g. body boards, surf boards, stand-up-paddles boards);
— water ski, wakeboard or kite surfing board;
— devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic;
— devices that are kept in shape by permanent air flow;
— rings intended for use on water slides;
— wading devices.
- Standard46 pagesEnglish languagee-Library read for1 day
This document specifies safety requirements and test methods related to materials, safety, performance and consumer information for classified floating leisure articles for use on and in the water according to ISO 25649-1:2024.
This document is applicable to Class D floating leisure articles for use on and in water according to ISO 25649-1:2024 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
NOTE 1 Typical products forming Class D (see Figure A.1 and Figure A.2):
— inflatable climbing structures on the water;
— bouncing platforms;
— inflatable slides;
— water trampolines;
— teeter totters;
— obstacle courses.
NOTE 2 Typical places for application:
— pools;
— lakes, ponds;
— open sea;
— sea shore (no offshore winds, no currents).
- Standard46 pagesEnglish languagee-Library read for1 day
This document specifies the methods for testing the environmental characteristics of RFID-enabled sporting goods. This document suggest methods for identifying the main use environments and related testing of environmental characteristics of sporting goods for indoor and outdoor sports with RFID and optionally additional advanced electronic devices like sensors. The environmental characteristics addressed in this document are applicable to manufacturers, including distribution and inventory management, as well as the aspects of consumer use of the actual RFID-enabled sports items. This document establishes methods to measure and evaluate the performance change of tags after environmental characteristic testing.
- Standard23 pagesEnglish languagesale 15% off
This document specifies performance requirements and test methods for head protectors for use in ice hockey.
This document is applicable to head protectors worn by ice hockey players excluding goalkeepers and by referees.
- Standard30 pagesEnglish languagee-Library read for1 day
This document specifies general requirements and test methods for head, face, eye, neck, and body protectors (hereafter referred to as protectors) for use in ice hockey.
This document is intended only for protectors used for ice hockey.
- Standard18 pagesEnglish languagee-Library read for1 day
This document specifies general safety requirements and test methods for indoor stationary training equipment. Other parts of the ISO 20957 series can modify the requirements contained in this document. This document also covers environmental aspects.
It also specifies a classification system (see Clause 4).
This document is applicable to all stationary training equipment. This includes equipment for use in training areas of organizations such as sport associations, educational establishments, hotels, sport halls, clubs, rehabilitation centres and studios (classes S and I) where access and control is specifically regulated by the owner (person who has the legal responsibility), equipment for domestic use (class H) and other types of equipment including motor driven equipment as defined in 3.1.
The requirements of other parts of the ISO 20957 series take priority over the corresponding requirements of this general standard.
This document does not apply to stationary training equipment intended for outdoor use. It also does not apply to stationary training equipment intended for use by children under the age of 14 years, unless such stationary training equipment is intended for educational purposes in schools and other pedagogical contexts for children under the supervision of a qualified adult instructor.
- Standard30 pagesEnglish languagee-Library read for1 day
This document specifies performance requirements and test methods for eye and face protectors for use in ice hockey only.
This document is applicable to eye and face protectors worn by ice hockey players other than goalkeepers and by referees.
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies performance requirements and test methods for head and face protectors for use by ice hockey goalkeepers only.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies functional requirements (see Clause 4) and specific safety requirements in addition to the general safety requirements in EN 913:2018+A1:2021 (see Clause 5).
This document is applicable to 2 types of asymmetric bars (see Table 1) intended for use under supervision of a competent person.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies consumer information for classified floating leisure articles for use on and in water according to ISO 25649-1:2024.
- Standard32 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class B floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class B floating leisure articles as specified in ISO 25649-1:2024, Table 1.
Class B devices provide a buoyant structure with one or more body openings into which the user is positioned partly immersed.
NOTE 1 Typical products in Class B (see Annex B):
— floating rafts with interior body holding system (“swim seats”) mostly in circular or square shape, fantasy shape for playing purposes;
— floating fantasy shaped structures with one or more openings to host a child’s body, with or without body holding system;
— floating with slits or openings to put legs through any shape;
— floating rings with interior seat segments inside the circular body opening.
NOTE 2 Typical places for application:
— pools;
— protected areas of lakes, ponds;
— protected areas of sea shore (no offshore winds, no currents).
- Standard37 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class C floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class C floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1 Typical products forming Class C (see Annex B):
— tube riders towable with interior holding facility and closed cockpit;
— raft riders towable;
— board riders towable;
— banana type towable.
NOTE 2 Typical places for application:
— distant from bathing areas and other frequented water surfaces, wide empty spaces, dedicated racetracks (parcours);
— no to little waves;
— no strong currents.
- Standard41 pagesEnglish languagee-Library read for1 day
This document specifies general safety requirements and test methods related to materials, safety and performance for classified floating leisure articles for use on and in water.
This document is not applicable to:
— aquatic toys (use in shallow waters/use under supervision);
— inflatable boats with a buoyancy > 1 800 N;
— buoyant aids for swimming instructions;
— air mattresses that are not specifically designed or intended for use on the water (e.g. velour bed, self-inflating mattress and rubberized cotton air mattress);
— floating seats for angling purposes;
— surf sports type devices (e.g. body boards, surf boards, stand-up-paddles boards);
— water ski, wakeboard or kite surfing board;
— devices made from rigid materials e.g. wood, aluminium, hard or non-deformable plastic;
— devices that are kept in shape by permanent air flow;
— rings intended for use on water slides;
— wading devices.
- Standard46 pagesEnglish languagee-Library read for1 day
This document specifies additional specific safety requirements and test methods for Class A floating leisure articles for use on and in the water regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
This document is applicable for Class A floating leisure articles as specified in ISO 25649-1:2024, Table 1.
NOTE 1 Typical products in Class A (see Figures A.1 to A.3):
— “Floating Islands” in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure;
— large floats/rafts in various shapes, from round to square;
— large floating tubes, giant tubes (inflatable or inherently buoyant);
— floating arm chairs, seats and sun beds;
— air mattresses for use on the water;
— recreational rafts/floating platforms/pontoons.
NOTE 2 Typical places for application:
— pools;
— protected areas of lakes, ponds;
— protected area sea shore (no offshore winds, no currents).
- Standard27 pagesEnglish languagee-Library read for1 day