61 - CLOTHING INDUSTRY
ICS 61 Details
CLOTHING INDUSTRY
BEKLEIDUNGSINDUSTRIE
INDUSTRIE DU VETEMENT
OBLAČILNA INDUSTRIJA
General Information
Frequently Asked Questions
ICS 61 is a classification code in the International Classification for Standards (ICS) system. It covers "CLOTHING INDUSTRY". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1273 standards classified under ICS 61 (CLOTHING INDUSTRY). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 61 - CLOTHING INDUSTRY
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies a test method for evaluating the antimicrobial (either antibacterial or antifungal, or both) activity of footwear and footwear components. This document is applicable to all types of footwear and footwear components employing diffusing antimicrobial treatments.
- Standard13 pagesEnglish languagesale 15% off
This document establishes the performance requirements for shank components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to shanks for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification9 pagesEnglish languagee-Library read for1 day
This document specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. It describes the method known as the grab test. The method defined in this document is applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is normally not applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.[2], [3], [4] This method is applicable to straight seams only (obtained from previously sewn articles or prepared from fabric samples) and not to curved seams (see Annex B for considerations on seams). The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document establishes the performance requirements for lining and insock components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate compliance with these requirements.
This document applies to lining and insocks for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification13 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for outsole components for footwear, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to outsoles for all kinds of footwear as defined in Table 1.
This document can be used as a reference by the footwear manufacturer and the supplier.
- Technical specification11 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for accessories (laces and eyelets, metal components, touch and close fasteners, zippers and trims) for footwear, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to accessories (laces and eyelets, metal components, touch and close fasteners, zippers and trims) for all kinds of footwear as defined in Table 1.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification10 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for insole components for footwear in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to insoles for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification10 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for upper components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to uppers for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the footwear manufacturer and the supplier.
- Technical specification13 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for heel and top pieces components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods used to evaluate the compliance with the requirements.
This document applies to heel and top piece for all kind of footwear as defined in Clause 4. It does not apply to finished footwear.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification10 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for stiffener and toe puff components for footwear, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to stiffeners and toe puffs for all kinds of footwear as defined in Table 1.
This document can be used as a reference by the manufacturer and the supplier.
This document does not establish the degrees of hardness, that are to be chosen by the manufacturer.
- Technical specification9 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for shank components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to shanks for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier..
- Technical specification9 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for stiffener and toe puff components for footwear, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to stiffeners and toe puffs for all kinds of footwear as defined in Table 1.
This document can be used as a reference by the manufacturer and the supplier.
This document does not establish the degrees of hardness, that are to be chosen by the manufacturer.
- Technical specification9 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for outsole components for footwear, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to outsoles for all kinds of footwear as defined in Table 1.
This document can be used as a reference by the footwear manufacturer and the supplier
- Technical specification11 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for heel and top pieces components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods used to evaluate the compliance with the requirements.
This document applies to heel and top piece for all kind of footwear as defined in Clause 4. It does not apply to finished footwear.
This document can be used as a reference by the manufacturer and the supplier
- Technical specification10 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for lining and insock components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate compliance with these requirements.
This document applies to lining and insocks for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification13 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for upper components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to uppers for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the footwear manufacturer and the supplier.
- Technical specification13 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for accessories (laces and eyelets, metal components, touch and close fasteners, zippers and trims) for footwear, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to accessories (laces and eyelets, metal components, touch and close fasteners, zippers and trims) for all kinds of footwear as defined in Table 1.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification10 pagesEnglish languagee-Library read for1 day
This document establishes the performance requirements for insole components for footwear in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.
This document applies to insoles for all kinds of footwear as defined in Clause 4.
This document can be used as a reference by the manufacturer and the supplier.
- Technical specification10 pagesEnglish languagee-Library read for1 day
This document specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications.
- Standard15 pagesEnglish languagee-Library read for1 day
ISO 5403-1:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications.
- Standard15 pagesEnglish languagee-Library read for1 day
ISO 5403-1:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
Le présent document spécifie les mesures principales et secondaires pour des types spécifiés de vêtements afin d’établir un système de désignation de la taille fondé sur les mesures corporelles (comme défini dans l’ISO 8559-1).
- Standard49 pagesEnglish languagee-Library read for1 day
Le présent document spécifie les mesures principales et secondaires pour des types spécifiés de vêtements afin d’établir un système de désignation de la taille fondé sur les mesures corporelles (comme défini dans l’ISO 8559-1).
- Standard49 pagesEnglish languagee-Library read for1 day
Le présent document spécifie les mesures principales et secondaires pour des types spécifiés de vêtements afin d’établir un système de désignation de la taille fondé sur les mesures corporelles (comme défini dans l’ISO 8559-1).
- Standard41 pagesEnglish languagesale 15% off
- Standard42 pagesFrench languagesale 15% off
This document specifies a method to quantify residues of certain organic solvents (see Annex A) in footwear materials with gas chromatography-mass spectrometry (GC-MS).
This document is applicable to footwear materials where there is a risk for the presence of certain solvent residues (e.g. solvent present in glues, leather finishing and coated textiles, plastics, rubber).
- Standard19 pagesEnglish languagee-Library read for1 day
This document contains the sizing of last systems for daily wear footwear including casual footwear, sports footwear and rain footwear.
- Technical report31 pagesEnglish languagesale 15% off
This document specifies a method to quantify residues of certain organic solvents (see Annex A) in footwear materials with gas chromatography-mass spectrometry (GC-MS).
This document is applicable to footwear materials where there is a risk for the presence of certain solvent residues (e.g. solvent present in glues, leather finishing and coated textiles, plastics, rubber).
- Standard19 pagesEnglish languagee-Library read for1 day
This European Standard deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances.
- Standard20 pagesEnglish languagee-Library read for1 day
This European Standard deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances.
- Amendment5 pagesEnglish languagee-Library read for1 day
This document specifies a method to quantify residues of certain organic solvents (see Annex A) in footwear materials with gas chromatography-mass spectrometry (GC-MS). This document is applicable to footwear materials where there is a risk for the presence of certain solvent residues (e.g. solvent present in glues, leather finishing and coated textiles, plastics, rubber).
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This European Standard deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances.
- Amendment5 pagesEnglish languagee-Library read for1 day
This European Standard deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for single-phase and 480 V for other appliances.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on tapes: strengths of puller attachment, closed-end slide fastener bottom stop, top stop, open-end slide fastener box, reciprocating mechanism, closed slide fastener when extended laterally, open-end attachment when extended laterally, slider locking device, and open-end slide fastener single stringer slider retention and slider resistance to torque.
NOTE The tests specified in Annexes B to K have been specifically devised to permit their direct application to finished slide fasteners with a view to giving the user reasonable assurance that a slide fastener conforming to the requirements of this document can satisfactorily fulfil its intended purpose. Annex L gives information about sampling procedures for bulk quantities of slide fasteners.
In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning.
This document is applicable to all different types of slide fasteners for general use and is not applicable to slide fasteners for specialist purposes (for example: pressure sealed slide fasteners for diving suits).
- Standard43 pagesEnglish languagee-Library read for1 day
This document specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on tapes: strengths of puller attachment, closed-end slide fastener bottom stop, top stop, open-end slide fastener box, reciprocating mechanism, closed slide fastener when extended laterally, open-end attachment when extended laterally, slider locking device, and open-end slide fastener single stringer slider retention and slider resistance to torque.
NOTE The tests specified in Annexes B to K have been specifically devised to permit their direct application to finished slide fasteners with a view to giving the user reasonable assurance that a slide fastener conforming to the requirements of this document can satisfactorily fulfil its intended purpose. Annex L gives information about sampling procedures for bulk quantities of slide fasteners.
In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning.
This document is applicable to all different types of slide fasteners for general use and is not applicable to slide fasteners for specialist purposes (for example: pressure sealed slide fasteners for diving suits).
- Standard43 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the qualification and quantification of organotin compounds by applying gas chromatography coupled with mass spectrometry. This test method is applicable to all types of footwear materials except metal hardware (see ISO/TR 16178).
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies quantitative test methods to evaluate the antibacterial activity of footwear and footwear components.
This document is applicable to all types of footwear and footwear components employing non-diffusing antibacterial treatments.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the qualification and quantification of organotin compounds by applying gas chromatography coupled with mass spectrometry. This test method is applicable to all types of footwear materials except metal hardware (see ISO/TR 16178).
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the qualification and quantification of organotin compounds by applying gas chromatography coupled with mass spectrometry. This test method is applicable to all types of footwear materials except metal hardware (see ISO/TR 16178).
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This document specifies quantitative test methods to evaluate the antibacterial activity of footwear and footwear components.
This document is applicable to all types of footwear and footwear components employing non-diffusing antibacterial treatments.
- Standard21 pagesEnglish languagee-Library read for1 day
This document defines terms used in the footwear industry.
- Standard63 pagesEnglish languagee-Library read for1 day
This document specifies quantitative test methods to evaluate the antibacterial activity of footwear and footwear components. This document is applicable to all types of footwear and footwear components employing non-diffusing antibacterial treatments.
- Standard14 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This document specifies requirements for garments that support the protection against tick bites. The document applies to body covering garments (at least covering the torso, arms and legs) where protection against tick bites, which is provided by garments as physical barriers, is reinforced by industrial treatment with the biocide permethrin of the fabrics, fibres or yarns prior to confection. The specified requirements focus on prevention of bites by the nymph stage of the tick Ixodes ricinus, which is the most relevant stage and species for public and occupational health in Europe.
This document specifies requirements and the tests for garments containing permethrin to provide sufficient assistance in protection against tick bites, and to be durable and safe for the user.
NOTE 1 Non-permethrin containing garments covering the torso, arms and legs and feet offer some protection against tick bites, but are insufficient under high exposure to ticks, which can crawl over the fabric to reach bare skin and bite. Garments that comply with this document and cover at least torso, arms and legs to counter ticks from crawling over the fabric to reach bare skin and bite thereby provide substantial protection.
NOTE 2 The importance of following manufacturers laundering instructions to prevent early deterioration of the effect of permethrin treatment is stressed throughout the document.
- Standard36 pagesEnglish languagee-Library read for1 day
This document defines terms used in the footwear industry.
- Standard63 pagesEnglish languagee-Library read for1 day
This document defines the most common terms related to defects that occur in the manufacture, storage and usage of footwear and that can be determined during visual inspection of the end product.
NOTE The photos are given as examples and do not represent all possible instances.
- Standard39 pagesEnglish languagee-Library read for1 day
This document defines terms used in the footwear industry.
- Standard51 pagesEnglish languagesale 15% off
- Standard53 pagesFrench languagesale 15% off
This document defines the most common terms related to defects that occur in the manufacture, storage and usage of footwear and that can be determined during visual inspection of the end product.
NOTE The photos are given as examples and do not represent all possible instances.
- Standard39 pagesEnglish languagee-Library read for1 day
This document defines the most common terms related to defects that occur in the manufacture, storage and usage of footwear and that can be determined during visual inspection of the end product. NOTE The photos are given as examples and do not represent all possible instances.
- Standard31 pagesEnglish languagesale 15% off
- Standard31 pagesFrench languagesale 15% off
- Standard31 pagesFrench languagesale 15% off
This document establishes the performance requirements for heel and top pieces components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods used to evaluate the compliance with the requirements. This document applies to heel and top piece for all kind of footwear as defined in Clause 4. It does not apply to finished footwear. This document can be used as a reference by the manufacturer and the supplier.
- Technical specification3 pagesEnglish languagesale 15% off
- Technical specification3 pagesFrench languagesale 15% off
- Technical specification3 pagesFrench languagesale 15% off
This document establishes the performance requirements for lining and insock components for footwear, irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate compliance with these requirements. This document applies to lining and insocks for all kinds of footwear as defined in Clause 4. This document can be used as a reference by the manufacturer and the supplier.
- Technical specification6 pagesEnglish languagesale 15% off
This document establishes the performance requirements for accessories (laces and eyelets, metal components, touch and close fasteners, zippers and trims) for footwear, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements. This document applies to accessories (laces and eyelets, metal components, touch and close fasteners, zippers and trims) for all kinds of footwear as defined in Table 1. This document can be used as a reference by the manufacturer and the supplier.
- Technical specification3 pagesEnglish languagesale 15% off